Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2019-11-01

This series contains updates to e1000, igb, igc, ixgbe, i40e and driver
documentation.

Lyude Paul fixes an issue where a fatal read error occurs when the
device is unplugged from the machine.  So change the read error into a
warn while the device is still present.

Manfred Rudigier found that the i350 device was not apart of the "Media
Auto Sense" feature, yet the device supports it.  So add the missing
i350 device to the check and fix an issue where the media auto sense
would flip/flop when no cable was connected to the port causing spurious
kernel log messages.

I fixed an issue where the fix to resolve receive buffer starvation was
applied in more than one place in the driver, one being the incorrect
location in the i40e driver.

Wenwen Wang fixes a potential memory leak in e1000 where allocated
memory is not properly cleaned up in one of the error paths.

Jonathan Neuschäfer cleans up the driver documentation to be consistent
and remove the footnote reference, since the footnote no longer exists in
the documentation.

Igor Pylypiv cleans up a duplicate clearing of a bit, no need to clear
it twice.

v2: Fixed alignment issue in patch 3 of the series based on community
    feedback.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/device_drivers/intel/e100.rst

 .. SPDX-License-Identifier: GPL-2.0+
 
-==============================================================
-Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
-==============================================================
+=============================================================
+Linux Base Driver for the Intel(R) PRO/100 Family of Adapters
+=============================================================
 
 June 1, 2018
 
@@ -21,7 +21,7 @@ Contents
 In This Release
 ===============
 
-This file describes the Linux* Base Driver for the Intel(R) PRO/100 Family of
+This file describes the Linux Base Driver for the Intel(R) PRO/100 Family of
 Adapters. This driver includes support for Itanium(R)2-based systems.
 
 For questions related to hardware requirements, refer to the documentation
@@ -138,9 +138,9 @@ version 1.6 or later is required for this functionality.
 The latest release of ethtool can be found from
 https://www.kernel.org/pub/software/network/ethtool/
 
-Enabling Wake on LAN* (WoL)
----------------------------
-WoL is provided through the ethtool* utility.  For instructions on
+Enabling Wake on LAN (WoL)
+--------------------------
+WoL is provided through the ethtool utility.  For instructions on
 enabling WoL with ethtool, refer to the ethtool man page.  WoL will be
 enabled on the system during the next shut down or reboot.  For this
 driver version, in order to enable WoL, the e100 driver must be loaded

Documentation/networking/device_drivers/intel/e1000.rst

 .. SPDX-License-Identifier: GPL-2.0+
 
-===========================================================
-Linux* Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
+==========================================================
+Linux Base Driver for Intel(R) Ethernet Network Connection
+==========================================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 1999 - 2013 Intel Corporation.
@@ -438,10 +438,10 @@ ethtool
   The latest release of ethtool can be found from
   https://www.kernel.org/pub/software/network/ethtool/
 
-Enabling Wake on LAN* (WoL)
----------------------------
+Enabling Wake on LAN (WoL)
+--------------------------
 
-  WoL is configured through the ethtool* utility.
+  WoL is configured through the ethtool utility.
 
   WoL will be enabled on the system during the next shut down or reboot.
   For this driver version, in order to enable WoL, the e1000 driver must be

Documentation/networking/device_drivers/intel/e1000e.rst

 .. SPDX-License-Identifier: GPL-2.0+
 
-======================================================
-Linux* Driver for Intel(R) Ethernet Network Connection
-======================================================
+=====================================================
+Linux Driver for Intel(R) Ethernet Network Connection
+=====================================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 2008-2018 Intel Corporation.
@@ -338,7 +338,7 @@ and higher cannot be forced. Use the autonegotiation advertising setting to
 manually set devices for 1 Gbps and higher.
 
 Speed, duplex, and autonegotiation advertising are configured through the
-ethtool* utility.
+ethtool utility.
 
 Caution: Only experienced network administrators should force speed and duplex
 or change autonegotiation advertising manually. The settings at the switch must
@@ -351,9 +351,9 @@ will not attempt to auto-negotiate with its link partner since those adapters
 operate only in full duplex and only at their native speed.
 
 
-Enabling Wake on LAN* (WoL)
----------------------------
-WoL is configured through the ethtool* utility.
+Enabling Wake on LAN (WoL)
+--------------------------
+WoL is configured through the ethtool utility.
 
 WoL will be enabled on the system during the next shut down or reboot. For
 this driver version, in order to enable WoL, the e1000e driver must be loaded

Documentation/networking/device_drivers/intel/fm10k.rst

 .. SPDX-License-Identifier: GPL-2.0+
 
-==============================================================
-Linux* Base Driver for Intel(R) Ethernet Multi-host Controller
-==============================================================
+=============================================================
+Linux Base Driver for Intel(R) Ethernet Multi-host Controller
+=============================================================
 
 August 20, 2018
 Copyright(c) 2015-2018 Intel Corporation.
@@ -120,8 +120,8 @@ rx-flow-hash tcp4|udp4|ah4|esp4|sctp4|tcp6|udp6|ah6|esp6|sctp6 m|v|t|s|d|f|n|r
 Known Issues/Troubleshooting
 ============================
 
-Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS under Linux KVM
----------------------------------------------------------------------------------------
+Enabling SR-IOV in a 64-bit Microsoft Windows Server 2012/R2 guest OS under Linux KVM
+-------------------------------------------------------------------------------------
 KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM. This
 includes traditional PCIe devices, as well as SR-IOV-capable devices based on
 the Intel Ethernet Controller XL710.

Documentation/networking/device_drivers/intel/i40e.rst

 .. SPDX-License-Identifier: GPL-2.0+
 
-==================================================================
-Linux* Base Driver for the Intel(R) Ethernet Controller 700 Series
-==================================================================
+=================================================================
+Linux Base Driver for the Intel(R) Ethernet Controller 700 Series
+=================================================================
 
 Intel 40 Gigabit Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
@@ -384,7 +384,7 @@ NOTE: You cannot set the speed for devices based on the Intel(R) Ethernet
 Network Adapter XXV710 based devices.
 
 Speed, duplex, and autonegotiation advertising are configured through the
-ethtool* utility.
+ethtool utility.
 
 Caution: Only experienced network administrators should force speed and duplex
 or change autonegotiation advertising manually. The settings at the switch must

Documentation/networking/device_drivers/intel/iavf.rst

 .. SPDX-License-Identifier: GPL-2.0+
 
-==================================================================
-Linux* Base Driver for Intel(R) Ethernet Adaptive Virtual Function
-==================================================================
+=================================================================
+Linux Base Driver for Intel(R) Ethernet Adaptive Virtual Function
+=================================================================
 
 Intel Ethernet Adaptive Virtual Function Linux driver.
 Copyright(c) 2013-2018 Intel Corporation.
@@ -19,7 +19,7 @@ Contents
 Overview
 ========
 
-This file describes the iavf Linux* Base Driver. This driver was formerly
+This file describes the iavf Linux Base Driver. This driver was formerly
 called i40evf.
 
 The iavf driver supports the below mentioned virtual function devices and

Documentation/networking/device_drivers/intel/ice.rst

 .. SPDX-License-Identifier: GPL-2.0+
 
-===================================================================
-Linux* Base Driver for the Intel(R) Ethernet Connection E800 Series
-===================================================================
+==================================================================
+Linux Base Driver for the Intel(R) Ethernet Connection E800 Series
+==================================================================
 
 Intel ice Linux driver.
 Copyright(c) 2018 Intel Corporation.

Documentation/networking/device_drivers/intel/igb.rst

 .. SPDX-License-Identifier: GPL-2.0+
 
-===========================================================
-Linux* Base Driver for Intel(R) Ethernet Network Connection
-===========================================================
+==========================================================
+Linux Base Driver for Intel(R) Ethernet Network Connection
+==========================================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
@@ -129,9 +129,9 @@ version is required for this functionality. Download it at:
 https://www.kernel.org/pub/software/network/ethtool/
 
 
-Enabling Wake on LAN* (WoL)
----------------------------
-WoL is configured through the ethtool* utility.
+Enabling Wake on LAN (WoL)
+--------------------------
+WoL is configured through the ethtool utility.
 
 WoL will be enabled on the system during the next shut down or reboot. For
 this driver version, in order to enable WoL, the igb driver must be loaded

Documentation/networking/device_drivers/intel/igbvf.rst

 .. SPDX-License-Identifier: GPL-2.0+
 
-============================================================
-Linux* Base Virtual Function Driver for Intel(R) 1G Ethernet
-============================================================
+===========================================================
+Linux Base Virtual Function Driver for Intel(R) 1G Ethernet
+===========================================================
 
 Intel Gigabit Virtual Function Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.

Documentation/networking/device_drivers/intel/ixgbe.rst

 .. SPDX-License-Identifier: GPL-2.0+
 
-=============================================================================
-Linux* Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters
-=============================================================================
+===========================================================================
+Linux Base Driver for the Intel(R) Ethernet 10 Gigabit PCI Express Adapters
+===========================================================================
 
 Intel 10 Gigabit Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.
@@ -519,8 +519,8 @@ The offload is also supported for ixgbe's VFs, but the VF must be set as
 Known Issues/Troubleshooting
 ============================
 
-Enabling SR-IOV in a 64-bit Microsoft* Windows Server* 2012/R2 guest OS
------------------------------------------------------------------------
+Enabling SR-IOV in a 64-bit Microsoft Windows Server 2012/R2 guest OS
+---------------------------------------------------------------------
 Linux KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM.
 This includes traditional PCIe devices, as well as SR-IOV-capable devices based
 on the Intel Ethernet Controller XL710.

Documentation/networking/device_drivers/intel/ixgbevf.rst

 .. SPDX-License-Identifier: GPL-2.0+
 
-=============================================================
-Linux* Base Virtual Function Driver for Intel(R) 10G Ethernet
-=============================================================
+============================================================
+Linux Base Virtual Function Driver for Intel(R) 10G Ethernet
+============================================================
 
 Intel 10 Gigabit Virtual Function Linux driver.
 Copyright(c) 1999-2018 Intel Corporation.

Documentation/networking/device_drivers/pensando/ionic.rst

 .. SPDX-License-Identifier: GPL-2.0+
 
-==========================================================
-Linux* Driver for the Pensando(R) Ethernet adapter family
-==========================================================
+========================================================
+Linux Driver for the Pensando(R) Ethernet adapter family
+========================================================
 
 Pensando Linux Ethernet driver.
 Copyright(c) 2019 Pensando Systems, Inc

drivers/net/ethernet/intel/e1000/e1000_ethtool.c

@@ -607,6 +607,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
 	for (i = 0; i < adapter->num_rx_queues; i++)
 		rxdr[i].count = rxdr->count;
 
+	err = 0;
 	if (netif_running(adapter->netdev)) {
 		/* Try to get new resources before deleting old */
 		err = e1000_setup_all_rx_resources(adapter);
@@ -627,14 +628,13 @@ static int e1000_set_ringparam(struct net_device *netdev,
 		adapter->rx_ring = rxdr;
 		adapter->tx_ring = txdr;
 		err = e1000_up(adapter);
-		if (err)
-			goto err_setup;
 	}
 	kfree(tx_old);
 	kfree(rx_old);
 
 	clear_bit(__E1000_RESETTING, &adapter->flags);
-	return 0;
+	return err;
+
 err_setup_tx:
 	e1000_free_all_rx_resources(adapter);
 err_setup_rx:
@@ -646,7 +646,6 @@ static int e1000_set_ringparam(struct net_device *netdev,
 err_alloc_tx:
 	if (netif_running(adapter->netdev))
 		e1000_up(adapter);
-err_setup:
 	clear_bit(__E1000_RESETTING, &adapter->flags);
 	return err;
 }

drivers/net/ethernet/intel/i40e/i40e_xsk.c

@@ -157,11 +157,6 @@ static int i40e_xsk_umem_disable(struct i40e_vsi *vsi, u16 qid)
 		err = i40e_queue_pair_enable(vsi, qid);
 		if (err)
 			return err;
-
-		/* Kick start the NAPI context so that receiving will start */
-		err = i40e_xsk_wakeup(vsi->netdev, qid, XDP_WAKEUP_RX);
-		if (err)
-			return err;
 	}
 
 	return 0;

drivers/net/ethernet/intel/igb/e1000_82575.c

@@ -466,7 +466,7 @@ static s32 igb_init_mac_params_82575(struct e1000_hw *hw)
 			? igb_setup_copper_link_82575
 			: igb_setup_serdes_link_82575;
 
-	if (mac->type == e1000_82580) {
+	if (mac->type == e1000_82580 || mac->type == e1000_i350) {
 		switch (hw->device_id) {
 		/* feature not supported on these id's */
 		case E1000_DEV_ID_DH89XXCC_SGMII:

drivers/net/ethernet/intel/igb/igb_main.c

@@ -753,7 +753,8 @@ u32 igb_rd32(struct e1000_hw *hw, u32 reg)
 		struct net_device *netdev = igb->netdev;
 		hw->hw_addr = NULL;
 		netdev_err(netdev, "PCIe link lost\n");
-		WARN(1, "igb: Failed to read reg 0x%x!\n", reg);
+		WARN(pci_device_is_present(igb->pdev),
+		     "igb: Failed to read reg 0x%x!\n", reg);
 	}
 
 	return value;
@@ -2064,7 +2065,8 @@ static void igb_check_swap_media(struct igb_adapter *adapter)
 	if ((hw->phy.media_type == e1000_media_type_copper) &&
 	    (!(connsw & E1000_CONNSW_AUTOSENSE_EN))) {
 		swap_now = true;
-	} else if (!(connsw & E1000_CONNSW_SERDESD)) {
+	} else if ((hw->phy.media_type != e1000_media_type_copper) &&
+		   !(connsw & E1000_CONNSW_SERDESD)) {
 		/* copper signal takes time to appear */
 		if (adapter->copper_tries < 4) {
 			adapter->copper_tries++;
@@ -2370,7 +2372,7 @@ void igb_reset(struct igb_adapter *adapter)
 		adapter->ei.get_invariants(hw);
 		adapter->flags &= ~IGB_FLAG_MEDIA_RESET;
 	}
-	if ((mac->type == e1000_82575) &&
+	if ((mac->type == e1000_82575 || mac->type == e1000_i350) &&
 	    (adapter->flags & IGB_FLAG_MAS_ENABLE)) {
 		igb_enable_mas(adapter);
 	}

drivers/net/ethernet/intel/igc/igc_main.c

@@ -4047,7 +4047,8 @@ u32 igc_rd32(struct igc_hw *hw, u32 reg)
 		hw->hw_addr = NULL;
 		netif_device_detach(netdev);
 		netdev_err(netdev, "PCIe link lost, device now detached\n");
-		WARN(1, "igc: Failed to read reg 0x%x!\n", reg);
+		WARN(pci_device_is_present(igc->pdev),
+		     "igc: Failed to read reg 0x%x!\n", reg);
 	}
 
 	return value;

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -4310,7 +4310,6 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
 		if (test_bit(__IXGBE_RX_FCOE, &rx_ring->state))
 			set_bit(__IXGBE_RX_3K_BUFFER, &rx_ring->state);
 
-		clear_bit(__IXGBE_RX_BUILD_SKB_ENABLED, &rx_ring->state);
 		if (adapter->flags2 & IXGBE_FLAG2_RX_LEGACY)
 			continue;