Commit c97c23e3 authored by Senthil Balasubramanian's avatar Senthil Balasubramanian Committed by John W. Linville

mac80211: fix alignment issue with compare_ether_addr()

This addresses an alignment issue with compare_ether_addr().
The addresses passed to compare_ether_addr should be two bytes aligned.
It may function properly in x86 platform. However may not work properly
on IA-64 or ARM processor.

This also fixes a typo in mlme.c where the sk_buff struct name is incorect.
Though sizeof() works for any incorrect structure pointer name as its just
a pointer length that we want, lets just fix it.
Signed-off-by: default avatarSenthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: default avatarLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 70d251b2
......@@ -1325,7 +1325,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev,
/* prepare reordering buffer */
tid_agg_rx->reorder_buf =
kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
kmalloc(buf_size * sizeof(struct sk_buff *), GFP_ATOMIC);
if (!tid_agg_rx->reorder_buf) {
if (net_ratelimit())
printk(KERN_ERR "can not allocate reordering buffer "
......@@ -1334,7 +1334,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev,
goto end;
}
memset(tid_agg_rx->reorder_buf, 0,
buf_size * sizeof(struct sk_buf *));
buf_size * sizeof(struct sk_buff *));
if (local->ops->ampdu_action)
ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
......
......@@ -1091,7 +1091,7 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
u16 fc, hdrlen, ethertype;
u8 *payload;
u8 dst[ETH_ALEN];
u8 src[ETH_ALEN];
u8 src[ETH_ALEN] __aligned(2);
struct sk_buff *skb = rx->skb;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
DECLARE_MAC_BUF(mac);
......@@ -1234,7 +1234,7 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx)
*/
static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx)
{
static const u8 pae_group_addr[ETH_ALEN]
static const u8 pae_group_addr[ETH_ALEN] __aligned(2)
= { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 };
struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;
......
......@@ -34,11 +34,11 @@ void *mac80211_wiphy_privid = &mac80211_wiphy_privid;
/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
const unsigned char rfc1042_header[] =
const unsigned char rfc1042_header[] __aligned(2) =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
const unsigned char bridge_tunnel_header[] =
const unsigned char bridge_tunnel_header[] __aligned(2) =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment