PCI: parisc: use generic pci_enable_resources()

Use the generic pci_enable_resources() instead of the arch-specific code.

Unlike this arch-specific code, the generic version:
    - checks PCI_NUM_RESOURCES (11), not DEVICE_COUNT_RESOURCE (12), resources
    - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set
    - skips ROM resources unless IORESOURCE_ROM_ENABLE is set
    - checks for resource collisions with "!r->parent"
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

arch/parisc/kernel/pci.c

@@ -287,23 +287,15 @@ void pcibios_align_resource(void *data, struct resource *res,
  */
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd;
-	int idx;
+	int err;
+	u16 cmd, old_cmd;
 
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
-	for (idx = 0; idx < DEVICE_COUNT_RESOURCE; idx++) {
-		struct resource *r = &dev->resource[idx];
+	err = pci_enable_resources(dev, mask);
+	if (err < 0)
+		return err;
 
-		/* only setup requested resources */
-		if (!(mask & (1<<idx)))
-			continue;
-
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
 
 	cmd |= (PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
 
@@ -312,8 +304,12 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	if (dev->bus->bridge_ctl & PCI_BRIDGE_CTL_FAST_BACK)
 		cmd |= PCI_COMMAND_FAST_BACK;
 #endif
-	DBGC("PCIBIOS: Enabling device %s cmd 0x%04x\n", pci_name(dev), cmd);
-	pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+	if (cmd != old_cmd) {
+		dev_info(&dev->dev, "enabling SERR and PARITY (%04x -> %04x)\n",
+			old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
 	return 0;
 }