wil6210: print debug info when starting AP

In the wil_cfg80211_start_ap(), debug print selected data:
- beacon (before and after fix-up)
- crypto parameters
- mark start/stop AP invocation
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/wil6210/cfg80211.c

@@ -566,6 +566,34 @@ static int wil_cancel_remain_on_channel(struct wiphy *wiphy,
 	return rc;
 }
 
+static void wil_print_bcon_data(struct cfg80211_beacon_data *b)
+{
+	print_hex_dump_bytes("head     ", DUMP_PREFIX_OFFSET,
+			     b->head, b->head_len);
+	print_hex_dump_bytes("tail     ", DUMP_PREFIX_OFFSET,
+			     b->tail, b->tail_len);
+	print_hex_dump_bytes("BCON IE  ", DUMP_PREFIX_OFFSET,
+			     b->beacon_ies, b->beacon_ies_len);
+	print_hex_dump_bytes("PROBE    ", DUMP_PREFIX_OFFSET,
+			     b->probe_resp, b->probe_resp_len);
+	print_hex_dump_bytes("PROBE IE ", DUMP_PREFIX_OFFSET,
+			     b->proberesp_ies, b->proberesp_ies_len);
+	print_hex_dump_bytes("ASSOC IE ", DUMP_PREFIX_OFFSET,
+			     b->assocresp_ies, b->assocresp_ies_len);
+}
+
+static void wil_print_crypto(struct wil6210_priv *wil,
+			     struct cfg80211_crypto_settings *c)
+{
+	wil_dbg_misc(wil, "WPA versions: 0x%08x cipher group 0x%08x\n",
+		     c->wpa_versions, c->cipher_group);
+	wil_dbg_misc(wil, "Pairwise ciphers [%d]\n", c->n_ciphers_pairwise);
+	wil_dbg_misc(wil, "AKM suites [%d]\n", c->n_akm_suites);
+	wil_dbg_misc(wil, "Control port : %d, eth_type 0x%04x no_encrypt %d\n",
+		     c->control_port, be16_to_cpu(c->control_port_ethertype),
+		     c->control_port_no_encrypt);
+}
+
 static int wil_fix_bcon(struct wil6210_priv *wil,
 			struct cfg80211_beacon_data *bcon)
 {
@@ -599,8 +627,11 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	struct wireless_dev *wdev = ndev->ieee80211_ptr;
 	struct ieee80211_channel *channel = info->chandef.chan;
 	struct cfg80211_beacon_data *bcon = &info->beacon;
+	struct cfg80211_crypto_settings *crypto = &info->crypto;
 	u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
 
+	wil_dbg_misc(wil, "%s()\n", __func__);
+
 	if (!channel) {
 		wil_err(wil, "AP: No channel???\n");
 		return -EINVAL;
@@ -608,11 +639,19 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 
 	wil_dbg_misc(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value,
 		     channel->center_freq, info->privacy ? "secure" : "open");
+	wil_dbg_misc(wil, "Privacy: %d auth_type %d\n",
+		     info->privacy, info->auth_type);
+	wil_dbg_misc(wil, "BI %d DTIM %d\n", info->beacon_interval,
+		     info->dtim_period);
 	print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET,
 			     info->ssid, info->ssid_len);
+	wil_print_bcon_data(bcon);
+	wil_print_crypto(wil, crypto);
 
-	if (wil_fix_bcon(wil, bcon))
+	if (wil_fix_bcon(wil, bcon)) {
 		wil_dbg_misc(wil, "Fixed bcon\n");
+		wil_print_bcon_data(bcon);
+	}
 
 	mutex_lock(&wil->mutex);
 
@@ -667,6 +706,8 @@ static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
 	int rc = 0;
 	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
 
+	wil_dbg_misc(wil, "%s()\n", __func__);
+
 	mutex_lock(&wil->mutex);
 
 	rc = wmi_pcp_stop(wil);