Merge branch 'net-mvmdio-add-xMDIO-xSMI-support'

Antoine Tenart says:

====================
net: mvmdio: add xMDIO xSMI support

This series aims to add the xSMI support on the xMDIO bus to the
mvmdio driver. The xSMI interface complies with the IEEE 802.3 clause 45
and is used by 10GbE devices. On 7k and 8k (as of now), such an
interface is found and is used by Ethernet controllers.

Patches 1-4 and 9 are cosmetic cleanups.

Patches 5-7 are prerequisites to the xSMI support.

Patches 8 and 10-11 add the xSMI support to the mvmdio driver, and a
node is added both in the cp110 slave and master device trees.

This was tested on an Armada 8040 mcbin, as well as on both the
Armada 7040 DB and the Armada 8040 DB to ensure the SMI interface
was still working.

@Dave: patch 11 should go through the mvebu tree as asked by Gregory,
thanks!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/marvell-orion-mdio.txt

 * Marvell MDIO Ethernet Controller interface
 
 The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
-MV78xx0, Armada 370 and Armada XP have an identical unit that provides
-an interface with the MDIO bus. This driver handles this MDIO
-interface.
+MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an
+identical unit that provides an interface with the MDIO bus.
+Additionally, Armada 7k and Armada 8k has a second unit which
+provides an interface with the xMDIO bus. This driver handles
+these interfaces.
 
 Required properties:
-- compatible: "marvell,orion-mdio"
+- compatible: "marvell,orion-mdio" or "marvell,xmdio"
 - reg: address and length of the MDIO registers.  When an interrupt is
   not present, the length is the size of the SMI register (4 bytes)
   otherwise it must be 0x84 bytes to cover the interrupt control

drivers/net/ethernet/marvell/mvmdio.c

@@ -17,41 +17,52 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
 #include <linux/phy.h>
-#include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/of_mdio.h>
 #include <linux/sched.h>
 #include <linux/wait.h>
 
-#define MVMDIO_SMI_DATA_SHIFT              0
-#define MVMDIO_SMI_PHY_ADDR_SHIFT          16
-#define MVMDIO_SMI_PHY_REG_SHIFT           21
-#define MVMDIO_SMI_READ_OPERATION          BIT(26)
-#define MVMDIO_SMI_WRITE_OPERATION         0
-#define MVMDIO_SMI_READ_VALID              BIT(27)
-#define MVMDIO_SMI_BUSY                    BIT(28)
-#define MVMDIO_ERR_INT_CAUSE		   0x007C
-#define  MVMDIO_ERR_INT_SMI_DONE	   0x00000010
-#define MVMDIO_ERR_INT_MASK		   0x0080
+#define MVMDIO_SMI_DATA_SHIFT		0
+#define MVMDIO_SMI_PHY_ADDR_SHIFT	16
+#define MVMDIO_SMI_PHY_REG_SHIFT	21
+#define MVMDIO_SMI_READ_OPERATION	BIT(26)
+#define MVMDIO_SMI_WRITE_OPERATION	0
+#define MVMDIO_SMI_READ_VALID		BIT(27)
+#define MVMDIO_SMI_BUSY			BIT(28)
+#define MVMDIO_ERR_INT_CAUSE		0x007C
+#define  MVMDIO_ERR_INT_SMI_DONE	0x00000010
+#define MVMDIO_ERR_INT_MASK		0x0080
+
+#define MVMDIO_XSMI_MGNT_REG		0x0
+#define  MVMDIO_XSMI_PHYADDR_SHIFT	16
+#define  MVMDIO_XSMI_DEVADDR_SHIFT	21
+#define  MVMDIO_XSMI_WRITE_OPERATION	(0x5 << 26)
+#define  MVMDIO_XSMI_READ_OPERATION	(0x7 << 26)
+#define  MVMDIO_XSMI_READ_VALID		BIT(29)
+#define  MVMDIO_XSMI_BUSY		BIT(30)
+#define MVMDIO_XSMI_ADDR_REG		0x8
 
 /*
  * SMI Timeout measurements:
  * - Kirkwood 88F6281 (Globalscale Dreamplug): 45us to 95us (Interrupt)
  * - Armada 370       (Globalscale Mirabox):   41us to 43us (Polled)
  */
-#define MVMDIO_SMI_TIMEOUT		   1000 /* 1000us = 1ms */
-#define MVMDIO_SMI_POLL_INTERVAL_MIN	   45
-#define MVMDIO_SMI_POLL_INTERVAL_MAX	   55
+#define MVMDIO_SMI_TIMEOUT		1000 /* 1000us = 1ms */
+#define MVMDIO_SMI_POLL_INTERVAL_MIN	45
+#define MVMDIO_SMI_POLL_INTERVAL_MAX	55
+
+#define MVMDIO_XSMI_POLL_INTERVAL_MIN	150
+#define MVMDIO_XSMI_POLL_INTERVAL_MAX	160
 
 struct orion_mdio_dev {
-	struct mutex lock;
 	void __iomem *regs;
 	struct clk *clk[3];
 	/*
@@ -64,14 +75,21 @@ struct orion_mdio_dev {
 	wait_queue_head_t smi_busy_wait;
 };
 
-static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev)
-{
-	return !(readl(dev->regs) & MVMDIO_SMI_BUSY);
-}
+enum orion_mdio_bus_type {
+	BUS_TYPE_SMI,
+	BUS_TYPE_XSMI
+};
+
+struct orion_mdio_ops {
+	int (*is_done)(struct orion_mdio_dev *);
+	unsigned int poll_interval_min;
+	unsigned int poll_interval_max;
+};
 
 /* Wait for the SMI unit to be ready for another operation
  */
-static int orion_mdio_wait_ready(struct mii_bus *bus)
+static int orion_mdio_wait_ready(const struct orion_mdio_ops *ops,
+				 struct mii_bus *bus)
 {
 	struct orion_mdio_dev *dev = bus->priv;
 	unsigned long timeout = usecs_to_jiffies(MVMDIO_SMI_TIMEOUT);
@@ -79,14 +97,14 @@ static int orion_mdio_wait_ready(struct mii_bus *bus)
 	int timedout = 0;
 
 	while (1) {
-	        if (orion_mdio_smi_is_done(dev))
+	        if (ops->is_done(dev))
 			return 0;
 	        else if (timedout)
 			break;
 
 	        if (dev->err_interrupt <= 0) {
-			usleep_range(MVMDIO_SMI_POLL_INTERVAL_MIN,
-				     MVMDIO_SMI_POLL_INTERVAL_MAX);
+			usleep_range(ops->poll_interval_min,
+				     ops->poll_interval_max);
 
 			if (time_is_before_jiffies(end))
 				++timedout;
@@ -98,8 +116,7 @@ static int orion_mdio_wait_ready(struct mii_bus *bus)
 			if (timeout < 2)
 				timeout = 2;
 			wait_event_timeout(dev->smi_busy_wait,
-				           orion_mdio_smi_is_done(dev),
-				           timeout);
+				           ops->is_done(dev), timeout);
 
 			++timedout;
 	        }
@@ -109,52 +126,61 @@ static int orion_mdio_wait_ready(struct mii_bus *bus)
 	return  -ETIMEDOUT;
 }
 
-static int orion_mdio_read(struct mii_bus *bus, int mii_id,
-			   int regnum)
+static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev)
+{
+	return !(readl(dev->regs) & MVMDIO_SMI_BUSY);
+}
+
+static const struct orion_mdio_ops orion_mdio_smi_ops = {
+	.is_done = orion_mdio_smi_is_done,
+	.poll_interval_min = MVMDIO_SMI_POLL_INTERVAL_MIN,
+	.poll_interval_max = MVMDIO_SMI_POLL_INTERVAL_MAX,
+};
+
+static int orion_mdio_smi_read(struct mii_bus *bus, int mii_id,
+			       int regnum)
 {
 	struct orion_mdio_dev *dev = bus->priv;
 	u32 val;
 	int ret;
 
-	mutex_lock(&dev->lock);
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
 
-	ret = orion_mdio_wait_ready(bus);
+	ret = orion_mdio_wait_ready(&orion_mdio_smi_ops, bus);
 	if (ret < 0)
-		goto out;
+		return ret;
 
 	writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
 		(regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |
 		MVMDIO_SMI_READ_OPERATION),
 	       dev->regs);
 
-	ret = orion_mdio_wait_ready(bus);
+	ret = orion_mdio_wait_ready(&orion_mdio_smi_ops, bus);
 	if (ret < 0)
-		goto out;
+		return ret;
 
 	val = readl(dev->regs);
 	if (!(val & MVMDIO_SMI_READ_VALID)) {
 		dev_err(bus->parent, "SMI bus read not valid\n");
-		ret = -ENODEV;
-		goto out;
+		return -ENODEV;
 	}
 
-	ret = val & 0xFFFF;
-out:
-	mutex_unlock(&dev->lock);
-	return ret;
+	return val & GENMASK(15, 0);
 }
 
-static int orion_mdio_write(struct mii_bus *bus, int mii_id,
-			    int regnum, u16 value)
+static int orion_mdio_smi_write(struct mii_bus *bus, int mii_id,
+				int regnum, u16 value)
 {
 	struct orion_mdio_dev *dev = bus->priv;
 	int ret;
 
-	mutex_lock(&dev->lock);
+	if (regnum & MII_ADDR_C45)
+		return -EOPNOTSUPP;
 
-	ret = orion_mdio_wait_ready(bus);
+	ret = orion_mdio_wait_ready(&orion_mdio_smi_ops, bus);
 	if (ret < 0)
-		goto out;
+		return ret;
 
 	writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) |
 		(regnum << MVMDIO_SMI_PHY_REG_SHIFT)  |
@@ -162,9 +188,74 @@ static int orion_mdio_write(struct mii_bus *bus, int mii_id,
 		(value << MVMDIO_SMI_DATA_SHIFT)),
 	       dev->regs);
 
-out:
-	mutex_unlock(&dev->lock);
-	return ret;
+	return 0;
+}
+
+static int orion_mdio_xsmi_is_done(struct orion_mdio_dev *dev)
+{
+	return !(readl(dev->regs + MVMDIO_XSMI_MGNT_REG) & MVMDIO_XSMI_BUSY);
+}
+
+static const struct orion_mdio_ops orion_mdio_xsmi_ops = {
+	.is_done = orion_mdio_xsmi_is_done,
+	.poll_interval_min = MVMDIO_XSMI_POLL_INTERVAL_MIN,
+	.poll_interval_max = MVMDIO_XSMI_POLL_INTERVAL_MAX,
+};
+
+static int orion_mdio_xsmi_read(struct mii_bus *bus, int mii_id,
+				int regnum)
+{
+	struct orion_mdio_dev *dev = bus->priv;
+	u16 dev_addr = (regnum >> 16) & GENMASK(4, 0);
+	int ret;
+
+	if (!(regnum & MII_ADDR_C45))
+		return -EOPNOTSUPP;
+
+	ret = orion_mdio_wait_ready(&orion_mdio_xsmi_ops, bus);
+	if (ret < 0)
+		return ret;
+
+	writel(regnum & GENMASK(15, 0), dev->regs + MVMDIO_XSMI_ADDR_REG);
+	writel((mii_id << MVMDIO_XSMI_PHYADDR_SHIFT) |
+	       (dev_addr << MVMDIO_XSMI_DEVADDR_SHIFT) |
+	       MVMDIO_XSMI_READ_OPERATION,
+	       dev->regs + MVMDIO_XSMI_MGNT_REG);
+
+	ret = orion_mdio_wait_ready(&orion_mdio_xsmi_ops, bus);
+	if (ret < 0)
+		return ret;
+
+	if (!(readl(dev->regs + MVMDIO_XSMI_MGNT_REG) &
+	      MVMDIO_XSMI_READ_VALID)) {
+		dev_err(bus->parent, "XSMI bus read not valid\n");
+		return -ENODEV;
+	}
+
+	return readl(dev->regs + MVMDIO_XSMI_MGNT_REG) & GENMASK(15, 0);
+}
+
+static int orion_mdio_xsmi_write(struct mii_bus *bus, int mii_id,
+				int regnum, u16 value)
+{
+	struct orion_mdio_dev *dev = bus->priv;
+	u16 dev_addr = (regnum >> 16) & GENMASK(4, 0);
+	int ret;
+
+	if (!(regnum & MII_ADDR_C45))
+		return -EOPNOTSUPP;
+
+	ret = orion_mdio_wait_ready(&orion_mdio_xsmi_ops, bus);
+	if (ret < 0)
+		return ret;
+
+	writel(regnum & GENMASK(15, 0), dev->regs + MVMDIO_XSMI_ADDR_REG);
+	writel((mii_id << MVMDIO_XSMI_PHYADDR_SHIFT) |
+	       (dev_addr << MVMDIO_XSMI_DEVADDR_SHIFT) |
+	       MVMDIO_XSMI_WRITE_OPERATION | value,
+	       dev->regs + MVMDIO_XSMI_MGNT_REG);
+
+	return 0;
 }
 
 static irqreturn_t orion_mdio_err_irq(int irq, void *dev_id)
@@ -184,11 +275,14 @@ static irqreturn_t orion_mdio_err_irq(int irq, void *dev_id)
 
 static int orion_mdio_probe(struct platform_device *pdev)
 {
+	enum orion_mdio_bus_type type;
 	struct resource *r;
 	struct mii_bus *bus;
 	struct orion_mdio_dev *dev;
 	int i, ret;
 
+	type = (enum orion_mdio_bus_type)of_device_get_match_data(&pdev->dev);
+
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!r) {
 		dev_err(&pdev->dev, "No SMI register address given\n");
@@ -200,9 +294,18 @@ static int orion_mdio_probe(struct platform_device *pdev)
 	if (!bus)
 		return -ENOMEM;
 
+	switch (type) {
+	case BUS_TYPE_SMI:
+		bus->read = orion_mdio_smi_read;
+		bus->write = orion_mdio_smi_write;
+		break;
+	case BUS_TYPE_XSMI:
+		bus->read = orion_mdio_xsmi_read;
+		bus->write = orion_mdio_xsmi_write;
+		break;
+	}
+
 	bus->name = "orion_mdio_bus";
-	bus->read = orion_mdio_read;
-	bus->write = orion_mdio_write;
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii",
 		 dev_name(&pdev->dev));
 	bus->parent = &pdev->dev;
@@ -244,8 +347,6 @@ static int orion_mdio_probe(struct platform_device *pdev)
 		return -EPROBE_DEFER;
 	}
 
-	mutex_init(&dev->lock);
-
 	if (pdev->dev.of_node)
 		ret = of_mdiobus_register(bus, pdev->dev.of_node);
 	else
@@ -294,7 +395,8 @@ static int orion_mdio_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id orion_mdio_match[] = {
-	{ .compatible = "marvell,orion-mdio" },
+	{ .compatible = "marvell,orion-mdio", .data = (void *)BUS_TYPE_SMI },
+	{ .compatible = "marvell,xmdio", .data = (void *)BUS_TYPE_XSMI },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, orion_mdio_match);