Commit cbe743f1 authored by Guido Kiener's avatar Guido Kiener Committed by Greg Kroah-Hartman

usb: usbtmc: Fix ioctl USBTMC_IOCTL_ABORT_BULK_IN

Add parameter 'tag' to function usbtmc_ioctl_abort_bulk_in_tag()
for future versions.

Remove calculation of max_size (=wMaxPacketSize) and wrong
condition (actual == max_size) in while loop. An abort operation
should always flush the complete Bulk-IN until a short packet is
received.

Return error code ENOMSG when transfer (specified by given tag)
is not in progress and device returns code
USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS.

Use USBTMC_BUFSIZE (4k) instead of USBTMC_SIZE_IOBUFFER (2k).
Using USBTMC_SIZE_IOBUFFER is deprecated.

Use common macro USB_CTRL_GET_TIMEOUT instead of USBTMC_TIMEOUT.

Check only bit 0 (field bmAbortBulkIn) of the
CHECK_ABORT_BULK_IN_STATUS response, since other bits are reserved
and can change in future versions.
Signed-off-by: default avatarGuido Kiener <guido.kiener@rohde-schwarz.com>
Reviewed-by: default avatarSteve Bayless <steve_bayless@keysight.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent dfee02ac
......@@ -270,18 +270,17 @@ static int usbtmc_release(struct inode *inode, struct file *file)
return 0;
}
static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data)
static int usbtmc_ioctl_abort_bulk_in_tag(struct usbtmc_device_data *data,
u8 tag)
{
u8 *buffer;
struct device *dev;
int rv;
int n;
int actual;
struct usb_host_interface *current_setting;
int max_size;
dev = &data->intf->dev;
buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL);
buffer = kmalloc(USBTMC_BUFSIZE, GFP_KERNEL);
if (!buffer)
return -ENOMEM;
......@@ -289,86 +288,87 @@ static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data)
usb_rcvctrlpipe(data->usb_dev, 0),
USBTMC_REQUEST_INITIATE_ABORT_BULK_IN,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
data->bTag_last_read, data->bulk_in,
buffer, 2, USBTMC_TIMEOUT);
tag, data->bulk_in,
buffer, 2, USB_CTRL_GET_TIMEOUT);
if (rv < 0) {
dev_err(dev, "usb_control_msg returned %d\n", rv);
goto exit;
}
dev_dbg(dev, "INITIATE_ABORT_BULK_IN returned %x\n", buffer[0]);
dev_dbg(dev, "INITIATE_ABORT_BULK_IN returned %x with tag %02x\n",
buffer[0], buffer[1]);
if (buffer[0] == USBTMC_STATUS_FAILED) {
/* No transfer in progress and the Bulk-OUT FIFO is empty. */
rv = 0;
goto exit;
}
if (buffer[0] != USBTMC_STATUS_SUCCESS) {
dev_err(dev, "INITIATE_ABORT_BULK_IN returned %x\n",
buffer[0]);
rv = -EPERM;
if (buffer[0] == USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS) {
/* The device returns this status if either:
* - There is a transfer in progress, but the specified bTag
* does not match.
* - There is no transfer in progress, but the Bulk-OUT FIFO
* is not empty.
*/
rv = -ENOMSG;
goto exit;
}
max_size = 0;
current_setting = data->intf->cur_altsetting;
for (n = 0; n < current_setting->desc.bNumEndpoints; n++)
if (current_setting->endpoint[n].desc.bEndpointAddress ==
data->bulk_in)
max_size = usb_endpoint_maxp(&current_setting->endpoint[n].desc);
if (max_size == 0) {
dev_err(dev, "Couldn't get wMaxPacketSize\n");
if (buffer[0] != USBTMC_STATUS_SUCCESS) {
dev_err(dev, "INITIATE_ABORT_BULK_IN returned %x\n",
buffer[0]);
rv = -EPERM;
goto exit;
}
dev_dbg(&data->intf->dev, "wMaxPacketSize is %d\n", max_size);
n = 0;
do {
dev_dbg(dev, "Reading from bulk in EP\n");
usbtmc_abort_bulk_in_status:
dev_dbg(dev, "Reading from bulk in EP\n");
rv = usb_bulk_msg(data->usb_dev,
usb_rcvbulkpipe(data->usb_dev,
data->bulk_in),
buffer, USBTMC_SIZE_IOBUFFER,
&actual, USBTMC_TIMEOUT);
/* Data must be present. So use low timeout 300 ms */
rv = usb_bulk_msg(data->usb_dev,
usb_rcvbulkpipe(data->usb_dev,
data->bulk_in),
buffer, USBTMC_BUFSIZE,
&actual, 300);
n++;
print_hex_dump_debug("usbtmc ", DUMP_PREFIX_NONE, 16, 1,
buffer, actual, true);
if (rv < 0) {
dev_err(dev, "usb_bulk_msg returned %d\n", rv);
n++;
if (rv < 0) {
dev_err(dev, "usb_bulk_msg returned %d\n", rv);
if (rv != -ETIMEDOUT)
goto exit;
}
} while ((actual == max_size) &&
(n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN));
}
if (actual == max_size) {
if (actual == USBTMC_BUFSIZE)
goto usbtmc_abort_bulk_in_status;
if (n >= USBTMC_MAX_READS_TO_CLEAR_BULK_IN) {
dev_err(dev, "Couldn't clear device buffer within %d cycles\n",
USBTMC_MAX_READS_TO_CLEAR_BULK_IN);
rv = -EPERM;
goto exit;
}
n = 0;
usbtmc_abort_bulk_in_status:
rv = usb_control_msg(data->usb_dev,
usb_rcvctrlpipe(data->usb_dev, 0),
USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT,
0, data->bulk_in, buffer, 0x08,
USBTMC_TIMEOUT);
USB_CTRL_GET_TIMEOUT);
if (rv < 0) {
dev_err(dev, "usb_control_msg returned %d\n", rv);
goto exit;
}
dev_dbg(dev, "INITIATE_ABORT_BULK_IN returned %x\n", buffer[0]);
dev_dbg(dev, "CHECK_ABORT_BULK_IN returned %x\n", buffer[0]);
if (buffer[0] == USBTMC_STATUS_SUCCESS) {
rv = 0;
......@@ -376,43 +376,26 @@ static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data)
}
if (buffer[0] != USBTMC_STATUS_PENDING) {
dev_err(dev, "INITIATE_ABORT_BULK_IN returned %x\n", buffer[0]);
dev_err(dev, "CHECK_ABORT_BULK_IN returned %x\n", buffer[0]);
rv = -EPERM;
goto exit;
}
if (buffer[1] == 1)
do {
dev_dbg(dev, "Reading from bulk in EP\n");
rv = usb_bulk_msg(data->usb_dev,
usb_rcvbulkpipe(data->usb_dev,
data->bulk_in),
buffer, USBTMC_SIZE_IOBUFFER,
&actual, USBTMC_TIMEOUT);
n++;
if (rv < 0) {
dev_err(dev, "usb_bulk_msg returned %d\n", rv);
goto exit;
}
} while ((actual == max_size) &&
(n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN));
if (actual == max_size) {
dev_err(dev, "Couldn't clear device buffer within %d cycles\n",
USBTMC_MAX_READS_TO_CLEAR_BULK_IN);
rv = -EPERM;
goto exit;
if ((buffer[1] & 1) > 0) {
/* The device has 1 or more queued packets the Host can read */
goto usbtmc_abort_bulk_in_status;
}
goto usbtmc_abort_bulk_in_status;
/* The Host must send CHECK_ABORT_BULK_IN_STATUS at a later time. */
rv = -EAGAIN;
exit:
kfree(buffer);
return rv;
}
static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data)
{
return usbtmc_ioctl_abort_bulk_in_tag(data, data->bTag_last_read);
}
static int usbtmc_ioctl_abort_bulk_out(struct usbtmc_device_data *data)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment