Commit cc07d271 authored by Heiner Kallweit's avatar Heiner Kallweit Committed by David S. Miller

r8169: add EEE support for RTL8168f

Add EEE support for RTL8168f to the recently added EEE handling
framework in the driver. This patch leaves the chip defaults, means
EEE typically is disabled initially and it's up to the user to enable
it via ethtool.
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 25fe02d0
......@@ -1990,6 +1990,12 @@ static int rtl_get_eee_supp(struct rtl8169_private *tp)
int ret;
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_34:
case RTL_GIGA_MAC_VER_35:
case RTL_GIGA_MAC_VER_36:
case RTL_GIGA_MAC_VER_38:
ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
break;
case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_51:
phy_write(phydev, 0x1f, 0x0a5c);
ret = phy_read(phydev, 0x12);
......@@ -2009,6 +2015,12 @@ static int rtl_get_eee_lpadv(struct rtl8169_private *tp)
int ret;
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_34:
case RTL_GIGA_MAC_VER_35:
case RTL_GIGA_MAC_VER_36:
case RTL_GIGA_MAC_VER_38:
ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
break;
case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_51:
phy_write(phydev, 0x1f, 0x0a5d);
ret = phy_read(phydev, 0x11);
......@@ -2028,6 +2040,12 @@ static int rtl_get_eee_adv(struct rtl8169_private *tp)
int ret;
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_34:
case RTL_GIGA_MAC_VER_35:
case RTL_GIGA_MAC_VER_36:
case RTL_GIGA_MAC_VER_38:
ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
break;
case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_51:
phy_write(phydev, 0x1f, 0x0a5d);
ret = phy_read(phydev, 0x10);
......@@ -2047,6 +2065,12 @@ static int rtl_set_eee_adv(struct rtl8169_private *tp, int val)
int ret = 0;
switch (tp->mac_version) {
case RTL_GIGA_MAC_VER_34:
case RTL_GIGA_MAC_VER_35:
case RTL_GIGA_MAC_VER_36:
case RTL_GIGA_MAC_VER_38:
ret = phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
break;
case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_51:
phy_write(phydev, 0x1f, 0x0a5d);
phy_write(phydev, 0x10, val);
......@@ -2574,6 +2598,21 @@ static void rtl8168_config_eee_mac(struct rtl8169_private *tp)
rtl_w0w1_eri(tp, 0x1b0, ERIAR_MASK_1111, 0x0003, 0x0000, ERIAR_EXGMAC);
}
static void rtl8168f_config_eee_phy(struct rtl8169_private *tp)
{
struct phy_device *phydev = tp->phydev;
phy_write(phydev, 0x1f, 0x0007);
phy_write(phydev, 0x1e, 0x0020);
phy_set_bits(phydev, 0x15, BIT(8));
phy_write(phydev, 0x1f, 0x0005);
phy_write(phydev, 0x05, 0x8b85);
phy_set_bits(phydev, 0x06, BIT(13));
phy_write(phydev, 0x1f, 0x0000);
}
static void rtl8168g_config_eee_phy(struct rtl8169_private *tp)
{
phy_write(tp->phydev, 0x1f, 0x0a43);
......@@ -3348,6 +3387,8 @@ static void rtl8168e_2_hw_phy_config(struct rtl8169_private *tp)
rtl_w0w1_phy(tp, 0x06, 0x4000, 0x0000);
rtl_writephy(tp, 0x1f, 0x0000);
rtl8168f_config_eee_phy(tp);
/* EEE setting */
rtl_w0w1_eri(tp, 0x1b0, ERIAR_MASK_1111, 0x0003, 0x0000, ERIAR_EXGMAC);
rtl_writephy(tp, 0x1f, 0x0005);
......@@ -3398,6 +3439,8 @@ static void rtl8168f_hw_phy_config(struct rtl8169_private *tp)
rtl_writephy(tp, 0x05, 0x8b86);
rtl_w0w1_phy(tp, 0x06, 0x0001, 0x0000);
rtl_writephy(tp, 0x1f, 0x0000);
rtl8168f_config_eee_phy(tp);
}
static void rtl8168f_1_hw_phy_config(struct rtl8169_private *tp)
......@@ -5113,6 +5156,8 @@ static void rtl_hw_start_8168e_2(struct rtl8169_private *tp)
/* Adjust EEE LED frequency */
RTL_W8(tp, EEE_LED, RTL_R8(tp, EEE_LED) & ~0x07);
rtl8168_config_eee_mac(tp);
RTL_W8(tp, DLLPR, RTL_R8(tp, DLLPR) | PFM_EN);
RTL_W32(tp, MISC, RTL_R32(tp, MISC) | PWM_EN);
RTL_W8(tp, Config5, RTL_R8(tp, Config5) & ~Spi_en);
......@@ -5145,6 +5190,8 @@ static void rtl_hw_start_8168f(struct rtl8169_private *tp)
RTL_W8(tp, DLLPR, RTL_R8(tp, DLLPR) | PFM_EN);
RTL_W32(tp, MISC, RTL_R32(tp, MISC) | PWM_EN);
RTL_W8(tp, Config5, RTL_R8(tp, Config5) & ~Spi_en);
rtl8168_config_eee_mac(tp);
}
static void rtl_hw_start_8168f_1(struct rtl8169_private *tp)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment