Commit cc7c15ec authored by Alan Cox's avatar Alan Cox Committed by Jeff Garzik

pata_qdi: Fix initialisation

The QDI init code contains some bugs which mean it only works if you have
a test setup that causes both a successful and failed probe. Fix this

Found by Philip Guo

(Who found it working on code analysis tools not running VLB IDE
controllers)
Signed-off-by: default avatarAlan Cox <alan@redhat.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent fb9f8905
......@@ -363,7 +363,8 @@ static __init int qdi_init(void)
release_region(port, 2);
continue;
}
ct += qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04);
if (qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
ct++;
}
if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
/* QD6580: dual channel */
......@@ -375,11 +376,14 @@ static __init int qdi_init(void)
res = inb(port + 3);
if (res & 1) {
/* Single channel mode */
ct += qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04);
if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04))
ct++;
} else {
/* Dual channel mode */
ct += qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04);
ct += qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04);
if (qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04) == 0)
ct++;
if (qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04) == 0)
ct++;
}
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment