pinctrl: cherryview: add option to set open-drain pin config

On some CHV platforms, we need an option to configure the
open-drain setting for these pins.  This adds support for the
PIN_CONFIG_DRIVE_PUSH_PULL and PIN_CONFIG_DRIVE_OPEN_DRAIN to
disable/enable open-drain mode for a specific pin.
Signed-off-by: Dan O'Donovan <dan@emutex.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/intel/pinctrl-cherryview.c

@@ -1108,6 +1108,27 @@ static int chv_config_set_pull(struct chv_pinctrl *pctrl, unsigned pin,
 	return 0;
 }
 
+static int chv_config_set_oden(struct chv_pinctrl *pctrl, unsigned int pin,
+			       bool enable)
+{
+	void __iomem *reg = chv_padreg(pctrl, pin, CHV_PADCTRL1);
+	unsigned long flags;
+	u32 ctrl1;
+
+	raw_spin_lock_irqsave(&chv_lock, flags);
+	ctrl1 = readl(reg);
+
+	if (enable)
+		ctrl1 |= CHV_PADCTRL1_ODEN;
+	else
+		ctrl1 &= ~CHV_PADCTRL1_ODEN;
+
+	chv_writel(ctrl1, reg);
+	raw_spin_unlock_irqrestore(&chv_lock, flags);
+
+	return 0;
+}
+
 static int chv_config_set(struct pinctrl_dev *pctldev, unsigned pin,
 			  unsigned long *configs, unsigned nconfigs)
 {
@@ -1132,6 +1153,18 @@ static int chv_config_set(struct pinctrl_dev *pctldev, unsigned pin,
 				return ret;
 			break;
 
+		case PIN_CONFIG_DRIVE_PUSH_PULL:
+			ret = chv_config_set_oden(pctrl, pin, false);
+			if (ret)
+				return ret;
+			break;
+
+		case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+			ret = chv_config_set_oden(pctrl, pin, true);
+			if (ret)
+				return ret;
+			break;
+
 		default:
 			return -ENOTSUPP;
 		}