Commit cddbea8d authored by Fabio Estevam's avatar Fabio Estevam Committed by Shawn Guo

arm64: dts: imx8mq: Move thermal-zones out of bus node

thermal-zones node does not have any register properties and thus
shouldn't be placed inside the bus.

Move thermal-zones node from soc node to root node in order to fix
the following build warning with W=1:

arch/arm64/boot/dts/freescale/imx8mq.dtsi:305.18-364.6: Warning (simple_bus_reg): /soc@0/bus@30000000/thermal-zones: missing or empty reg/ranges property
Signed-off-by: default avatarFabio Estevam <festevam@gmail.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 547e1232
...@@ -167,6 +167,67 @@ psci { ...@@ -167,6 +167,67 @@ psci {
method = "smc"; method = "smc";
}; };
thermal-zones {
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tmu 0>;
trips {
cpu_alert: cpu-alert {
temperature = <80000>;
hysteresis = <2000>;
type = "passive";
};
cpu-crit {
temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device =
<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
gpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tmu 1>;
trips {
gpu-crit {
temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
};
};
vpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tmu 2>;
trips {
vpu-crit {
temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
timer { timer {
compatible = "arm,armv8-timer"; compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
...@@ -302,67 +363,6 @@ tmu: tmu@30260000 { ...@@ -302,67 +363,6 @@ tmu: tmu@30260000 {
#thermal-sensor-cells = <1>; #thermal-sensor-cells = <1>;
}; };
thermal-zones {
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tmu 0>;
trips {
cpu_alert: cpu-alert {
temperature = <80000>;
hysteresis = <2000>;
type = "passive";
};
cpu-crit {
temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device =
<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
gpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tmu 1>;
trips {
gpu-crit {
temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
};
};
vpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tmu 2>;
trips {
vpu-crit {
temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
wdog1: watchdog@30280000 { wdog1: watchdog@30280000 {
compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt"; compatible = "fsl,imx8mq-wdt", "fsl,imx21-wdt";
reg = <0x30280000 0x10000>; reg = <0x30280000 0x10000>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment