bnx2x: Add support for idlechk tests.

This patch populates a database of idlechk tests (registers and
predicates) and performs the idlechk using this data.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/Makefile

@@ -5,5 +5,5 @@
 
 obj-$(CONFIG_BNX2X) += bnx2x.o
 
-bnx2x-y := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o bnx2x_sp.o
+bnx2x-y := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o bnx2x_sp.o bnx2x_self_test.o
 bnx2x-$(CONFIG_BNX2X_SRIOV) += bnx2x_vfpf.o bnx2x_sriov.o

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

@@ -1979,6 +1979,9 @@ struct bnx2x_func_init_params {
 
 #define skip_queue(bp, idx)	(NO_FCOE(bp) && IS_FCOE_IDX(idx))
 
+/*self test*/
+int bnx2x_idle_chk(struct bnx2x *bp);
+
 /**
  * bnx2x_set_mac_one - configure a single MAC address
  *
@@ -2430,13 +2433,6 @@ int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err);
 #define HC_SEG_ACCESS_ATTN		4
 #define HC_SEG_ACCESS_NORM		0   /*Driver decision 0-1*/
 
-static const u32 dmae_reg_go_c[] = {
-	DMAE_REG_GO_C0, DMAE_REG_GO_C1, DMAE_REG_GO_C2, DMAE_REG_GO_C3,
-	DMAE_REG_GO_C4, DMAE_REG_GO_C5, DMAE_REG_GO_C6, DMAE_REG_GO_C7,
-	DMAE_REG_GO_C8, DMAE_REG_GO_C9, DMAE_REG_GO_C10, DMAE_REG_GO_C11,
-	DMAE_REG_GO_C12, DMAE_REG_GO_C13, DMAE_REG_GO_C14, DMAE_REG_GO_C15
-};
-
 void bnx2x_set_ethtool_ops(struct bnx2x *bp, struct net_device *netdev);
 void bnx2x_notify_link_changed(struct bnx2x *bp);
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -276,6 +276,13 @@ static const struct pci_device_id bnx2x_pci_tbl[] = {
 
 MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl);
 
+const u32 dmae_reg_go_c[] = {
+	DMAE_REG_GO_C0, DMAE_REG_GO_C1, DMAE_REG_GO_C2, DMAE_REG_GO_C3,
+	DMAE_REG_GO_C4, DMAE_REG_GO_C5, DMAE_REG_GO_C6, DMAE_REG_GO_C7,
+	DMAE_REG_GO_C8, DMAE_REG_GO_C9, DMAE_REG_GO_C10, DMAE_REG_GO_C11,
+	DMAE_REG_GO_C12, DMAE_REG_GO_C13, DMAE_REG_GO_C14, DMAE_REG_GO_C15
+};
+
 /* Global resources for unloading a previously loaded device */
 #define BNX2X_PREV_WAIT_NEEDED 1
 static DEFINE_SEMAPHORE(bnx2x_prev_sem);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c

@@ -23,6 +23,8 @@
 #include "bnx2x_cmn.h"
 #include "bnx2x_sriov.h"
 
+extern const u32 dmae_reg_go_c[];
+
 /* Statistics */
 
 /*