Commit ce474796 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 mm changes from Ingo Molnar:
 "The main change in this cycle is the rework of the TLB range flushing
  code, to simplify, fix and consolidate the code.  By Dave Hansen"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Set TLB flush tunable to sane value (33)
  x86/mm: New tunable for single vs full TLB flush
  x86/mm: Add tracepoints for TLB flushes
  x86/mm: Unify remote INVLPG code
  x86/mm: Fix missed global TLB flush stat
  x86/mm: Rip out complicated, out-of-date, buggy TLB flushing
  x86/mm: Clean up the TLB flushing code
  x86/smep: Be more informative when signalling an SMEP fault
parents 76f09aa4 a5102476
When the kernel unmaps or modified the attributes of a range of
memory, it has two choices:
1. Flush the entire TLB with a two-instruction sequence. This is
a quick operation, but it causes collateral damage: TLB entries
from areas other than the one we are trying to flush will be
destroyed and must be refilled later, at some cost.
2. Use the invlpg instruction to invalidate a single page at a
time. This could potentialy cost many more instructions, but
it is a much more precise operation, causing no collateral
damage to other TLB entries.
Which method to do depends on a few things:
1. The size of the flush being performed. A flush of the entire
address space is obviously better performed by flushing the
entire TLB than doing 2^48/PAGE_SIZE individual flushes.
2. The contents of the TLB. If the TLB is empty, then there will
be no collateral damage caused by doing the global flush, and
all of the individual flush will have ended up being wasted
work.
3. The size of the TLB. The larger the TLB, the more collateral
damage we do with a full flush. So, the larger the TLB, the
more attrative an individual flush looks. Data and
instructions have separate TLBs, as do different page sizes.
4. The microarchitecture. The TLB has become a multi-level
cache on modern CPUs, and the global flushes have become more
expensive relative to single-page flushes.
There is obviously no way the kernel can know all these things,
especially the contents of the TLB during a given flush. The
sizes of the flush will vary greatly depending on the workload as
well. There is essentially no "right" point to choose.
You may be doing too many individual invalidations if you see the
invlpg instruction (or instructions _near_ it) show up high in
profiles. If you believe that individual invalidations being
called too often, you can lower the tunable:
/sys/debug/kernel/x86/tlb_single_page_flush_ceiling
This will cause us to do the global flush for more cases.
Lowering it to 0 will disable the use of the individual flushes.
Setting it to 1 is a very conservative setting and it should
never need to be 0 under normal circumstances.
Despite the fact that a single individual flush on x86 is
guaranteed to flush a full 2MB [1], hugetlbfs always uses the full
flushes. THP is treated exactly the same as normal memory.
You might see invlpg inside of flush_tlb_mm_range() show up in
profiles, or you can use the trace_tlb_flush() tracepoints. to
determine how long the flush operations are taking.
Essentially, you are balancing the cycles you spend doing invlpg
with the cycles that you spend refilling the TLB later.
You can measure how expensive TLB refills are by using
performance counters and 'perf stat', like this:
perf stat -e
cpu/event=0x8,umask=0x84,name=dtlb_load_misses_walk_duration/,
cpu/event=0x8,umask=0x82,name=dtlb_load_misses_walk_completed/,
cpu/event=0x49,umask=0x4,name=dtlb_store_misses_walk_duration/,
cpu/event=0x49,umask=0x2,name=dtlb_store_misses_walk_completed/,
cpu/event=0x85,umask=0x4,name=itlb_misses_walk_duration/,
cpu/event=0x85,umask=0x2,name=itlb_misses_walk_completed/
That works on an IvyBridge-era CPU (i5-3320M). Different CPUs
may have differently-named counters, but they should at least
be there in some form. You can use pmu-tools 'ocperf list'
(https://github.com/andikleen/pmu-tools) to find the right
counters for a given CPU.
1. A footnote in Intel's SDM "4.10.4.2 Recommended Invalidation"
says: "One execution of INVLPG is sufficient even for a page
with size greater than 4 KBytes."
......@@ -3,6 +3,10 @@
#include <asm/desc.h>
#include <linux/atomic.h>
#include <linux/mm_types.h>
#include <trace/events/tlb.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
#include <asm/paravirt.h>
......@@ -44,6 +48,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
/* Re-load page tables */
load_cr3(next->pgd);
trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
/* Stop flush ipis for the previous mm */
cpumask_clear_cpu(cpu, mm_cpumask(prev));
......@@ -71,6 +76,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
* to make sure to use no freed page tables.
*/
load_cr3(next->pgd);
trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
load_LDT_nolock(&next->context);
}
}
......
......@@ -72,7 +72,6 @@ extern u16 __read_mostly tlb_lld_4k[NR_INFO];
extern u16 __read_mostly tlb_lld_2m[NR_INFO];
extern u16 __read_mostly tlb_lld_4m[NR_INFO];
extern u16 __read_mostly tlb_lld_1g[NR_INFO];
extern s8 __read_mostly tlb_flushall_shift;
/*
* CPU type and hardware bug flags. Kept separately for each CPU.
......
......@@ -724,11 +724,6 @@ static unsigned int amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
}
#endif
static void cpu_set_tlb_flushall_shift(struct cpuinfo_x86 *c)
{
tlb_flushall_shift = 6;
}
static void cpu_detect_tlb_amd(struct cpuinfo_x86 *c)
{
u32 ebx, eax, ecx, edx;
......@@ -776,8 +771,6 @@ static void cpu_detect_tlb_amd(struct cpuinfo_x86 *c)
tlb_lli_2m[ENTRIES] = eax & mask;
tlb_lli_4m[ENTRIES] = tlb_lli_2m[ENTRIES] >> 1;
cpu_set_tlb_flushall_shift(c);
}
static const struct cpu_dev amd_cpu_dev = {
......
......@@ -481,26 +481,17 @@ u16 __read_mostly tlb_lld_2m[NR_INFO];
u16 __read_mostly tlb_lld_4m[NR_INFO];
u16 __read_mostly tlb_lld_1g[NR_INFO];
/*
* tlb_flushall_shift shows the balance point in replacing cr3 write
* with multiple 'invlpg'. It will do this replacement when
* flush_tlb_lines <= active_lines/2^tlb_flushall_shift.
* If tlb_flushall_shift is -1, means the replacement will be disabled.
*/
s8 __read_mostly tlb_flushall_shift = -1;
void cpu_detect_tlb(struct cpuinfo_x86 *c)
{
if (this_cpu->c_detect_tlb)
this_cpu->c_detect_tlb(c);
printk(KERN_INFO "Last level iTLB entries: 4KB %d, 2MB %d, 4MB %d\n"
"Last level dTLB entries: 4KB %d, 2MB %d, 4MB %d, 1GB %d\n"
"tlb_flushall_shift: %d\n",
"Last level dTLB entries: 4KB %d, 2MB %d, 4MB %d, 1GB %d\n",
tlb_lli_4k[ENTRIES], tlb_lli_2m[ENTRIES],
tlb_lli_4m[ENTRIES], tlb_lld_4k[ENTRIES],
tlb_lld_2m[ENTRIES], tlb_lld_4m[ENTRIES],
tlb_lld_1g[ENTRIES], tlb_flushall_shift);
tlb_lld_1g[ENTRIES]);
}
void detect_ht(struct cpuinfo_x86 *c)
......
......@@ -634,31 +634,6 @@ static void intel_tlb_lookup(const unsigned char desc)
}
}
static void intel_tlb_flushall_shift_set(struct cpuinfo_x86 *c)
{
switch ((c->x86 << 8) + c->x86_model) {
case 0x60f: /* original 65 nm celeron/pentium/core2/xeon, "Merom"/"Conroe" */
case 0x616: /* single-core 65 nm celeron/core2solo "Merom-L"/"Conroe-L" */
case 0x617: /* current 45 nm celeron/core2/xeon "Penryn"/"Wolfdale" */
case 0x61d: /* six-core 45 nm xeon "Dunnington" */
tlb_flushall_shift = -1;
break;
case 0x63a: /* Ivybridge */
tlb_flushall_shift = 2;
break;
case 0x61a: /* 45 nm nehalem, "Bloomfield" */
case 0x61e: /* 45 nm nehalem, "Lynnfield" */
case 0x625: /* 32 nm nehalem, "Clarkdale" */
case 0x62c: /* 32 nm nehalem, "Gulftown" */
case 0x62e: /* 45 nm nehalem-ex, "Beckton" */
case 0x62f: /* 32 nm Xeon E7 */
case 0x62a: /* SandyBridge */
case 0x62d: /* SandyBridge, "Romely-EP" */
default:
tlb_flushall_shift = 6;
}
}
static void intel_detect_tlb(struct cpuinfo_x86 *c)
{
int i, j, n;
......@@ -683,7 +658,6 @@ static void intel_detect_tlb(struct cpuinfo_x86 *c)
for (j = 1 ; j < 16 ; j++)
intel_tlb_lookup(desc[j]);
}
intel_tlb_flushall_shift_set(c);
}
static const struct cpu_dev intel_cpu_dev = {
......
......@@ -577,6 +577,8 @@ static int is_f00f_bug(struct pt_regs *regs, unsigned long address)
static const char nx_warning[] = KERN_CRIT
"kernel tried to execute NX-protected page - exploit attempt? (uid: %d)\n";
static const char smep_warning[] = KERN_CRIT
"unable to execute userspace code (SMEP?) (uid: %d)\n";
static void
show_fault_oops(struct pt_regs *regs, unsigned long error_code,
......@@ -597,6 +599,10 @@ show_fault_oops(struct pt_regs *regs, unsigned long error_code,
if (pte && pte_present(*pte) && !pte_exec(*pte))
printk(nx_warning, from_kuid(&init_user_ns, current_uid()));
if (pte && pte_present(*pte) && pte_exec(*pte) &&
(pgd_flags(*pgd) & _PAGE_USER) &&
(read_cr4() & X86_CR4_SMEP))
printk(smep_warning, from_kuid(&init_user_ns, current_uid()));
}
printk(KERN_ALERT "BUG: unable to handle kernel ");
......
......@@ -18,6 +18,13 @@
#include <asm/dma.h> /* for MAX_DMA_PFN */
#include <asm/microcode.h>
/*
* We need to define the tracepoints somewhere, and tlb.c
* is only compied when SMP=y.
*/
#define CREATE_TRACE_POINTS
#include <trace/events/tlb.h>
#include "mm_internal.h"
static unsigned long __initdata pgt_buf_start;
......
......@@ -49,6 +49,7 @@ void leave_mm(int cpu)
if (cpumask_test_cpu(cpu, mm_cpumask(active_mm))) {
cpumask_clear_cpu(cpu, mm_cpumask(active_mm));
load_cr3(swapper_pg_dir);
trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL);
}
}
EXPORT_SYMBOL_GPL(leave_mm);
......@@ -102,20 +103,24 @@ static void flush_tlb_func(void *info)
if (f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
return;
if (!f->flush_end)
f->flush_end = f->flush_start + PAGE_SIZE;
count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
if (f->flush_end == TLB_FLUSH_ALL)
if (f->flush_end == TLB_FLUSH_ALL) {
local_flush_tlb();
else if (!f->flush_end)
__flush_tlb_single(f->flush_start);
else {
trace_tlb_flush(TLB_REMOTE_SHOOTDOWN, TLB_FLUSH_ALL);
} else {
unsigned long addr;
unsigned long nr_pages =
f->flush_end - f->flush_start / PAGE_SIZE;
addr = f->flush_start;
while (addr < f->flush_end) {
__flush_tlb_single(addr);
addr += PAGE_SIZE;
}
trace_tlb_flush(TLB_REMOTE_SHOOTDOWN, nr_pages);
}
} else
leave_mm(smp_processor_id());
......@@ -153,46 +158,45 @@ void flush_tlb_current_task(void)
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
local_flush_tlb();
trace_tlb_flush(TLB_LOCAL_SHOOTDOWN, TLB_FLUSH_ALL);
if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL);
preempt_enable();
}
/*
* See Documentation/x86/tlb.txt for details. We choose 33
* because it is large enough to cover the vast majority (at
* least 95%) of allocations, and is small enough that we are
* confident it will not cause too much overhead. Each single
* flush is about 100 ns, so this caps the maximum overhead at
* _about_ 3,000 ns.
*
* This is in units of pages.
*/
unsigned long tlb_single_page_flush_ceiling = 33;
void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long vmflag)
{
unsigned long addr;
unsigned act_entries, tlb_entries = 0;
unsigned long nr_base_pages;
/* do a global flush by default */
unsigned long base_pages_to_flush = TLB_FLUSH_ALL;
preempt_disable();
if (current->active_mm != mm)
goto flush_all;
goto out;
if (!current->mm) {
leave_mm(smp_processor_id());
goto flush_all;
goto out;
}
if (end == TLB_FLUSH_ALL || tlb_flushall_shift == -1
|| vmflag & VM_HUGETLB) {
local_flush_tlb();
goto flush_all;
}
/* In modern CPU, last level tlb used for both data/ins */
if (vmflag & VM_EXEC)
tlb_entries = tlb_lli_4k[ENTRIES];
else
tlb_entries = tlb_lld_4k[ENTRIES];
if ((end != TLB_FLUSH_ALL) && !(vmflag & VM_HUGETLB))
base_pages_to_flush = (end - start) >> PAGE_SHIFT;
/* Assume all of TLB entries was occupied by this task */
act_entries = tlb_entries >> tlb_flushall_shift;
act_entries = mm->total_vm > act_entries ? act_entries : mm->total_vm;
nr_base_pages = (end - start) >> PAGE_SHIFT;
/* tlb_flushall_shift is on balance point, details in commit log */
if (nr_base_pages > act_entries) {
if (base_pages_to_flush > tlb_single_page_flush_ceiling) {
base_pages_to_flush = TLB_FLUSH_ALL;
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
local_flush_tlb();
} else {
......@@ -201,17 +205,15 @@ void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
__flush_tlb_single(addr);
}
if (cpumask_any_but(mm_cpumask(mm),
smp_processor_id()) < nr_cpu_ids)
flush_tlb_others(mm_cpumask(mm), mm, start, end);
preempt_enable();
return;
}
flush_all:
trace_tlb_flush(TLB_LOCAL_MM_SHOOTDOWN, base_pages_to_flush);
out:
if (base_pages_to_flush == TLB_FLUSH_ALL) {
start = 0UL;
end = TLB_FLUSH_ALL;
}
if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL);
flush_tlb_others(mm_cpumask(mm), mm, start, end);
preempt_enable();
}
......@@ -260,32 +262,26 @@ static void do_kernel_range_flush(void *info)
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
unsigned act_entries;
struct flush_tlb_info info;
/* In modern CPU, last level tlb used for both data/ins */
act_entries = tlb_lld_4k[ENTRIES];
/* Balance as user space task's flush, a bit conservative */
if (end == TLB_FLUSH_ALL || tlb_flushall_shift == -1 ||
(end - start) >> PAGE_SHIFT > act_entries >> tlb_flushall_shift)
if (end == TLB_FLUSH_ALL ||
(end - start) > tlb_single_page_flush_ceiling * PAGE_SIZE) {
on_each_cpu(do_flush_tlb_all, NULL, 1);
else {
} else {
struct flush_tlb_info info;
info.flush_start = start;
info.flush_end = end;
on_each_cpu(do_kernel_range_flush, &info, 1);
}
}
#ifdef CONFIG_DEBUG_TLBFLUSH
static ssize_t tlbflush_read_file(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
char buf[32];
unsigned int len;
len = sprintf(buf, "%hd\n", tlb_flushall_shift);
len = sprintf(buf, "%ld\n", tlb_single_page_flush_ceiling);
return simple_read_from_buffer(user_buf, count, ppos, buf, len);
}
......@@ -294,20 +290,20 @@ static ssize_t tlbflush_write_file(struct file *file,
{
char buf[32];
ssize_t len;
s8 shift;
int ceiling;
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
buf[len] = '\0';
if (kstrtos8(buf, 0, &shift))
if (kstrtoint(buf, 0, &ceiling))
return -EINVAL;
if (shift < -1 || shift >= BITS_PER_LONG)
if (ceiling < 0)
return -EINVAL;
tlb_flushall_shift = shift;
tlb_single_page_flush_ceiling = ceiling;
return count;
}
......@@ -317,11 +313,10 @@ static const struct file_operations fops_tlbflush = {
.llseek = default_llseek,
};
static int __init create_tlb_flushall_shift(void)
static int __init create_tlb_single_page_flush_ceiling(void)
{
debugfs_create_file("tlb_flushall_shift", S_IRUSR | S_IWUSR,
debugfs_create_file("tlb_single_page_flush_ceiling", S_IRUSR | S_IWUSR,
arch_debugfs_dir, NULL, &fops_tlbflush);
return 0;
}
late_initcall(create_tlb_flushall_shift);
#endif
late_initcall(create_tlb_single_page_flush_ceiling);
......@@ -516,4 +516,12 @@ struct vm_special_mapping
struct page **pages;
};
enum tlb_flush_reason {
TLB_FLUSH_ON_TASK_SWITCH,
TLB_REMOTE_SHOOTDOWN,
TLB_LOCAL_SHOOTDOWN,
TLB_LOCAL_MM_SHOOTDOWN,
NR_TLB_FLUSH_REASONS,
};
#endif /* _LINUX_MM_TYPES_H */
#undef TRACE_SYSTEM
#define TRACE_SYSTEM tlb
#if !defined(_TRACE_TLB_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_TLB_H
#include <linux/mm_types.h>
#include <linux/tracepoint.h>
#define TLB_FLUSH_REASON \
{ TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" }, \
{ TLB_REMOTE_SHOOTDOWN, "remote shootdown" }, \
{ TLB_LOCAL_SHOOTDOWN, "local shootdown" }, \
{ TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" }
TRACE_EVENT(tlb_flush,
TP_PROTO(int reason, unsigned long pages),
TP_ARGS(reason, pages),
TP_STRUCT__entry(
__field( int, reason)
__field(unsigned long, pages)
),
TP_fast_assign(
__entry->reason = reason;
__entry->pages = pages;
),
TP_printk("pages:%ld reason:%s (%d)",
__entry->pages,
__print_symbolic(__entry->reason, TLB_FLUSH_REASON),
__entry->reason)
);
#endif /* _TRACE_TLB_H */
/* This part must be outside protection */
#include <trace/define_trace.h>
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment