drm/amd/display: remove screen flashes on seamless boot

[Why]
We want boot to desktop to be seamless

[How]
During init pipes, avoid touching the pipes where GOP has already
enabled the HW to the state we want.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c

@@ -1521,6 +1521,14 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context)
 	struct dc_link *edp_link = get_link_for_edp(dc);
 	bool can_edp_fast_boot_optimize = false;
 	bool apply_edp_fast_boot_optimization = false;
+	bool can_apply_seamless_boot = false;
+
+	for (i = 0; i < context->stream_count; i++) {
+		if (context->streams[i]->apply_seamless_boot_optimization) {
+			can_apply_seamless_boot = true;
+			break;
+		}
+	}
 
 	if (edp_link) {
 		/* this seems to cause blank screens on DCE8 */
@@ -1549,7 +1557,7 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context)
 		}
 	}
 
-	if (!apply_edp_fast_boot_optimization) {
+	if (!apply_edp_fast_boot_optimization && !can_apply_seamless_boot) {
 		if (edp_link_to_turnoff) {
 			/*turn off backlight before DP_blank and encoder powered down*/
 			dc->hwss.edp_backlight_control(edp_link_to_turnoff, false);

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c

@@ -959,9 +959,25 @@ static void dcn10_disable_plane(struct dc *dc, struct pipe_ctx *pipe_ctx)
 static void dcn10_init_pipes(struct dc *dc, struct dc_state *context)
 {
 	int i;
+	bool can_apply_seamless_boot = false;
+
+	for (i = 0; i < context->stream_count; i++) {
+		if (context->streams[i]->apply_seamless_boot_optimization) {
+			can_apply_seamless_boot = true;
+			break;
+		}
+	}
 
 	for (i = 0; i < dc->res_pool->pipe_count; i++) {
 		struct timing_generator *tg = dc->res_pool->timing_generators[i];
+		struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
+
+		/* There is assumption that pipe_ctx is not mapping irregularly
+		 * to non-preferred front end. If pipe_ctx->stream is not NULL,
+		 * we will use the pipe, so don't disable
+		 */
+		if (pipe_ctx->stream != NULL)
+			continue;
 
 		if (tg->funcs->is_tg_enabled(tg))
 			tg->funcs->lock(tg);
@@ -975,7 +991,9 @@ static void dcn10_init_pipes(struct dc *dc, struct dc_state *context)
 		}
 	}
 
-	dc->res_pool->mpc->funcs->mpc_init(dc->res_pool->mpc);
+	/* Cannot reset the MPC mux if seamless boot */
+	if (!can_apply_seamless_boot)
+		dc->res_pool->mpc->funcs->mpc_init(dc->res_pool->mpc);
 
 	for (i = 0; i < dc->res_pool->pipe_count; i++) {
 		struct timing_generator *tg = dc->res_pool->timing_generators[i];
@@ -983,6 +1001,16 @@ static void dcn10_init_pipes(struct dc *dc, struct dc_state *context)
 		struct dpp *dpp = dc->res_pool->dpps[i];
 		struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
 
+		// W/A for issue with dc_post_update_surfaces_to_stream
+		hubp->power_gated = true;
+
+		/* There is assumption that pipe_ctx is not mapping irregularly
+		 * to non-preferred front end. If pipe_ctx->stream is not NULL,
+		 * we will use the pipe, so don't disable
+		 */
+		if (pipe_ctx->stream != NULL)
+			continue;
+
 		dpp->funcs->dpp_reset(dpp);
 
 		pipe_ctx->stream_res.tg = tg;

drivers/gpu/drm/amd/display/include/dal_asic_id.h

@@ -131,6 +131,7 @@
 #define INTERNAL_REV_RAVEN_A0             0x00    /* First spin of Raven */
 #define RAVEN_A0 0x01
 #define RAVEN_B0 0x21
+#define PICASSO_A0 0x41
 #if defined(CONFIG_DRM_AMD_DC_DCN1_01)
 /* DCN1_01 */
 #define RAVEN2_A0 0x81
@@ -165,4 +166,6 @@
 
 #define	FAMILY_UNKNOWN 0xFF
 
+
+
 #endif /* __DAL_ASIC_ID_H__ */