Merge tag 'mfd-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for s2mps15; sec-core
   - Add support for Lewisburg; lpc_ich
   - Add support for cs47l24 and wm1831; arizona

  New Functionality:
   - Allow user to select syscon register width; syscon

  Fix-ups:
   - Lots of Checkpatch fixes
   - Rename -pmic/-regulator; s2mps11
   - Build driver components into a single module; wm8994-*
   - Better handing of IRQ during suspend/resume; as3722
   - Constify things; da903x
   - Remove unused code; ab8500-core
   - Improve error handing; qcom_rpm
   - Simplify code: wm831x-otp, sta2x11-mfd
   - Improve locking; cros_ec_spi
   - Fix incorrect DT binding filename reference; arizona, palmas,
     snps-dwapb-gpio, wm8994

  Bug Fixes:
   - Fix broken SYSFS 'show ID' call; wm831x-otp
   - Protect reads from non-existent registers; qcom-spmi-pmic
   - Repair build warnings; as3722
   - Fix IRQ request ordering; arizona-irq
   - Ensure return value is boolean; ucb1x00-core, tps65010, tc6393xb,
     htc-egpio, dm355evm_msp, asic3"

* tag 'mfd-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (58 commits)
  mfd: davinci_voicecodec: Remove pointless 'out of memory' error message
  mfd: da9052-irq: Fix trivial 'space before comma' error
  mfd: da9052-i2c: Fix tabbing/whitespace issue
  mfd: da903x: Fix white space and split string issues
  mfd: cs5535-mfd: Add missing line spacing and make local array static
  mfd: cros_ec_spi: Repair comparison ordering issue
  mfd: cros_ec_i2c: Fix trivial 'tabs before spaces' whitespace issue.
  mfd: asic3: Fix a plethora of Checkpatch errors and warnings
  mfd: as3711: Repair OOM and 'line over 80 chars' formatting warnings
  mfd: arizona-i2c: Add blank line formatting after declaration
  mfd: arizona-core: msleep() is unreliable for anything <20ms use usleep_range() instead
  mfd: adp5520: Some trivial 'no space before tab' fixes
  mfd: ab8500-sysctrl: Fix Constify, printk => pr_info and formatting issues
  mfd: ab8500-gpadc: Squash a whole bunch of Checkpatch warnings and one error
  mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formatting
  mfd: ab8500-core: Fix many warnings reported by Checkpatch
  mfd: ab2100-otp: Remove pointless 'out of memory' error message
  mfd: ab3100-core.c: Fix multiple warnings reported by Checkpatch
  mfd: aat2870-core: Remove unnecessary 'out of memory' message
  mfd: 88pm860x-core: Fix commenting and declaration spacing
  ...

Documentation/devicetree/bindings/clock/samsung,s2mps11.txt

+Binding for Samsung S2M and S5M family clock generator block
+============================================================
+
+This is a part of device tree bindings for S2M and S5M family multi-function
+devices.
+More information can be found in bindings/mfd/sec-core.txt file.
+
+The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
+outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
+
+To register these as clocks with common clock framework instantiate under
+main device node a sub-node named "clocks".
+
+It uses the common clock binding documented in:
+ - Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+
+Required properties of the "clocks" sub-node:
+ - #clock-cells: should be 1.
+ - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
+               "samsung,s2mps14-clk", "samsung,s5m8767-clk"
+   The S2MPS15 uses the same compatible as S2MPS13, as both provides similar
+   clocks.
+
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+    Clock               ID           Devices
+    ----------------------------------------------------------
+    32KhzAP		0            S2MPS11/13/14/15, S5M8767
+    32KhzCP		1            S2MPS11/13/15, S5M8767
+    32KhzBT		2            S2MPS11/13/14/15, S5M8767
+
+Include dt-bindings/clock/samsung,s2mps11.h file to use preprocessor defines
+in device tree sources.
+
+
+Example:
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		s2m_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "xx", "yy", "zz";
+		};
+	};

Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt

@@ -24,7 +24,7 @@ controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt.  Shall be set to 2.  The first cell defines the interrupt number,
   the second encodes the triger flags encoded as described in
-  Documentation/devicetree/bindings/interrupts.txt
+  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 - interrupt-parent : The parent interrupt controller.
 - interrupts : The interrupt to the parent controller raised when GPIOs
   generate the interrupts.

Documentation/devicetree/bindings/mfd/arizona.txt

-Wolfson Arizona class audio SoCs
+Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
 
 These devices are audio SoCs with extensive digital capabilites and a range
 of analogue I/O.
@@ -6,12 +6,14 @@ of analogue I/O.
 Required properties:
 
   - compatible : One of the following chip-specific strings:
+        "cirrus,cs47l24"
         "wlf,wm5102"
         "wlf,wm5110"
         "wlf,wm8280"
         "wlf,wm8997"
         "wlf,wm8998"
         "wlf,wm1814"
+        "wlf,wm1831"
 
   - reg : I2C slave address when connected using I2C, chip select number when
     using SPI.
@@ -24,7 +26,7 @@ Required properties:
   - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
     The first cell is the IRQ number.
     The second cell is the flags, encoded as the trigger masks from
-    Documentation/devicetree/bindings/interrupts.txt
+    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 
   - gpio-controller : Indicates this device is a GPIO controller.
   - #gpio-cells : Must be 2. The first cell is the pin number and the
@@ -41,10 +43,21 @@ Required properties:
 
   - SPKVDD-supply : Speaker driver power supply (wm8997)
 
+  - DCVDD-supply : Main power supply (cs47l24, wm1831)
+
+  - MICVDD-supply : Microphone power supply (cs47l24, wm1831)
+
 Optional properties:
 
   - wlf,reset : GPIO specifier for the GPIO controlling /RESET
 
+  - clocks: Should reference the clocks supplied on MCLK1 and MCLK2
+  - clock-names: Should contains two strings:
+      "mclk1" for the clock supplied on MCLK1, recommended to be a high
+      quality audio reference clock
+      "mclk2" for the clock supplied on MCLK2, recommended to be an always on
+      32k clock
+
   - wlf,gpio-defaults : A list of GPIO configuration register values. Defines
     for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
     absent, no configuration of these registers is performed. If any entry has
@@ -59,6 +72,12 @@ Optional properties:
     that have not been specified are set to 0 by default. Entries are:
     <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
     <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
+  - wlf,out-mono : A list of boolean values indicating whether each output is
+    mono or stereo. Position within the list indicates the output affected
+    (eg. First entry in the list corresponds to output 1). A non-zero value
+    indicates a mono output. If present, the number of values should be less
+    than or equal to the number of outputs, if less values are supplied the
+    additional outputs will be treated as stereo.
 
   - wlf,dmic-ref : DMIC reference voltage source for each input, can be
     selected from either MICVDD or one of the MICBIAS's, defines
@@ -69,6 +88,7 @@ Optional properties:
   - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
     they are being externally supplied. As covered in
     Documentation/devicetree/bindings/regulator/regulator.txt
+    (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814)
 
 Also see child specific device properties:
   Regulator - ../regulator/arizona-regulator.txt

Documentation/devicetree/bindings/mfd/palmas.txt

@@ -24,7 +24,7 @@ and also the generic series names
 - #interrupt-cells : should be set to 2 for IRQ number and flags
   The first cell is the IRQ number.
   The second cell is the flags, encoded as the trigger masks from
-  Documentation/devicetree/bindings/interrupts.txt
+  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 - interrupt-parent : The parent interrupt controller.
 
 Optional properties:

Documentation/devicetree/bindings/mfd/s2mps11.txt

-
-* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator
-
-The Samsung S2MPS11 is a multi-function device which includes voltage and
-current regulators, RTC, charger controller and other sub-blocks. It is
-interfaced to the host controller using an I2C interface. Each sub-block is
-addressed by the host system using different I2C slave addresses.
-
-Required properties:
-- compatible: Should be one of the following
-	- "samsung,s2mps11-pmic"
-	- "samsung,s2mps13-pmic"
-	- "samsung,s2mps14-pmic"
-	- "samsung,s2mps15-pmic"
-	- "samsung,s2mpu02-pmic".
-- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
-
-Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
-  the interrupts from s2mps11 are delivered to.
-- interrupts: Interrupt specifiers for interrupt sources.
-- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
-  down. When the system is suspended it will always go down thus triggerring
-  unwanted buck warm reset (setting buck voltages to default values).
-- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
-  connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
-  register to turn off the power. Usually the ACOKB is pulled up to VBATT so
-  when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
-
-Optional nodes:
-- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768
-  KHz outputs, so to register these as clocks with common clock framework
-  instantiate a sub-node named "clocks". It uses the common clock binding
-  documented in :
-  [Documentation/devicetree/bindings/clock/clock-bindings.txt]
-  The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs.
-  - #clock-cells: should be 1.
-
-  - The following is the list of clocks generated by the controller. Each clock
-    is assigned an identifier and client nodes use this identifier to specify
-    the clock which they consume.
-    Clock               ID           Devices
-    ----------------------------------------------------------
-    32KhzAP		0            S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767
-    32KhzCP		1            S2MPS11, S2MPS13, S2MPS15, S5M8767
-    32KhzBT		2            S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767
-
-  - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
-		"samsung,s2mps14-clk", "samsung,s5m8767-clk"
-    The s2msp15 uses the same compatible as s2mps13, as both provides similar clocks.
-
-- regulators: The regulators of s2mps11 that have to be instantiated should be
-included in a sub-node named 'regulators'. Regulator nodes included in this
-sub-node should be of the format as listed below.
-
-	regulator_name {
-		[standard regulator constraints....];
-	};
-
- regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us
-
- BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly
- regulator-ramp-delay = <0> can be used for them to disable ramp delay.
- In the absence of the regulator-ramp-delay property, the default ramp
- delay will be used.
-
-NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
-for a particular group of BUCKs. So provide same regulator-ramp-delay<value>.
-Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6],
-BUCK[3, 4], and BUCK[7, 8, 10]
-
-On S2MPS14 the LDO10, LDO11 and LDO12 can be configured to external control
-over GPIO. To turn this feature on this property must be added to the regulator
-sub-node:
-	- samsung,ext-control-gpios: GPIO specifier for one GPIO
-		controlling this regulator (enable/disable);
-Example:
-	LDO12 {
-		regulator-name = "V_EMMC_2.8V";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		samsung,ext-control-gpios = <&gpk0 2 0>;
-	};
-
-
-The regulator constraints inside the regulator nodes use the standard regulator
-bindings which are documented elsewhere.
-
-The following are the names of the regulators that the s2mps11 pmic block
-supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of s2mps11.
-
-	- LDOn
-		  - valid values for n are:
-			- S2MPS11: 1 to 38
-			- S2MPS13: 1 to 40
-			- S2MPS14: 1 to 25
-			- S2MPS15: 1 to 27
-			- S2MPU02: 1 to 28
-		  - Example: LDO1, LDO2, LDO28
-	- BUCKn
-		  - valid values for n are:
-			- S2MPS11: 1 to 10
-			- S2MPS13: 1 to 10
-			- S2MPS14: 1 to 5
-			- S2MPS15: 1 to 10
-			- S2MPU02: 1 to 7
-		  - Example: BUCK1, BUCK2, BUCK9
-
-Example:
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-
-		s2m_osc: clocks {
-			compatible = "samsung,s2mps11-clk";
-			#clock-cells = <1>;
-			clock-output-names = "xx", "yy", "zz";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ABB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <50000>;
-			};
-		};
-	};

Documentation/devicetree/bindings/mfd/samsung,sec-core.txt

+Binding for Samsung S2M and S5M family multi-function device
+============================================================
+
+This is a part of device tree bindings for S2M and S5M family multi-function
+devices.
+
+The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
+of multi-function devices which include voltage and current regulators, RTC,
+charger controller, clock outputs and other sub-blocks. It is interfaced
+to the host controller using an I2C interface. Each sub-block is usually
+addressed by the host system using different I2C slave addresses.
+
+
+This document describes bindings for main device node. Optional sub-blocks
+must be a sub-nodes to it. Bindings for them can be found in:
+ - bindings/regulator/samsung,s2mpa01.txt
+ - bindings/regulator/samsung,s2mps11.txt
+ - bindings/regulator/samsung,s5m8767.txt
+ - bindings/clock/samsung,s2mps11.txt
+
+
+Required properties:
+ - compatible: Should be one of the following
+	- "samsung,s2mpa01-pmic",
+	- "samsung,s2mps11-pmic",
+	- "samsung,s2mps13-pmic",
+	- "samsung,s2mps14-pmic",
+	- "samsung,s2mps15-pmic",
+	- "samsung,s2mpu02-pmic",
+	- "samsung,s5m8767-pmic".
+ - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
+
+Optional properties:
+ - interrupt-parent: Specifies the phandle of the interrupt controller to which
+   the interrupts from s2mps11 are delivered to.
+ - interrupts: Interrupt specifiers for interrupt sources.
+ - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
+   down. When the system is suspended it will always go down thus triggerring
+   unwanted buck warm reset (setting buck voltages to default values).
+ - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
+   connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
+   register to turn off the power. Usually the ACOKB is pulled up to VBATT so
+   when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
+
+Example:
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		s2m_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "xx", "yy", "zz";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ABB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_ALIVE_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <50000>;
+			};
+		};
+	};

Documentation/devicetree/bindings/mfd/syscon.txt

@@ -13,6 +13,10 @@ Required properties:
 - compatible: Should contain "syscon".
 - reg: the register region can be accessed from syscon
 
+Optional property:
+- reg-io-width: the size (in bytes) of the IO accesses that should be
+  performed on the device.
+
 Examples:
 gpr: iomuxc-gpr@020e0000 {
 	compatible = "fsl,imx6q-iomuxc-gpr", "syscon";

Documentation/devicetree/bindings/mfd/s2mpa01.txt → Documentation/devicetree/bindings/regulator/samsung,s2mpa01.txt

+Binding for Samsung S2MPA01 regulator block
+===========================================
 
-* Samsung S2MPA01 Voltage and Current Regulator
+This is a part of device tree bindings for S2M family multi-function devices.
+More information can be found in bindings/mfd/sec-core.txt file.
 
-The Samsung S2MPA01 is a multi-function device which includes high
-efficiency buck converters including Dual-Phase buck converter, various LDOs,
-and an RTC. It is interfaced to the host controller using an I2C interface.
-Each sub-block is addressed by the host system using different I2C slave
-addresses.
+The S2MPA01 device provide buck and LDO regulators.
 
-Required properties:
-- compatible: Should be "samsung,s2mpa01-pmic".
-- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66.
+To register these with regulator framework instantiate under main device node
+a sub-node named "regulators" with more sub-nodes for each regulator using the
+common regulator binding documented in:
+ - Documentation/devicetree/bindings/regulator/regulator.txt
 
-Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
-  the interrupts from s2mpa01 are delivered to.
-- interrupts: An interrupt specifier for the sole interrupt generated by the
-  device.
-
-Optional nodes:
-- regulators: The regulators of s2mpa01 that have to be instantiated should be
-  included in a sub-node named 'regulators'. Regulator nodes and constraints
-  included in this sub-node use the standard regulator bindings which are
-  documented elsewhere.
-
-Properties for BUCK regulator nodes:
-- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
-  (default), 25000, or 50000. May be 0 for disabling the ramp delay on
-  BUCK{1,2,3,4}.
-
- In the absence of the regulator-ramp-delay property, the default ramp
- delay will be used.
-
-  NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
-  for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>.
-
-  The following BUCKs share ramp settings:
-  * 1 and 6
-  * 2 and 4
-  * 8, 9, and 10
-
-The following are the names of the regulators that the s2mpa01 PMIC block
-supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of s2mpa01.
 
+Names of regulators supported by S2MPA01 device:
 	- LDOn
 		  - valid values for n are 1 to 26
 		  - Example: LDO1, LD02, LDO26
 	- BUCKn
 		  - valid values for n are 1 to 10.
 		  - Example: BUCK1, BUCK2, BUCK9
+Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of device.
+
+
+Optional properties of buck regulator nodes under "regulators" sub-node:
+ - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
+   (default), 25000, or 50000. May be 0 for disabling the ramp delay on
+   BUCK{1,2,3,4}.
+
+   In the absence of the regulator-ramp-delay property, the default ramp
+   delay will be used.
+
+   Note: Some bucks share the ramp rate setting i.e. same ramp value
+   will be set for a particular group of bucks so provide the same
+   regulator-ramp-delay value for them.
+   Groups sharing ramp rate:
+    - buck{1,6},
+    - buck{2,4},
+    - buck{8,9,10}.
 
 Example:
 

Documentation/devicetree/bindings/regulator/samsung,s2mps11.txt

+Binding for Samsung S2M family regulator block
+==============================================
+
+This is a part of device tree bindings for S2M family multi-function devices.
+More information can be found in bindings/mfd/sec-core.txt file.
+
+The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators.
+
+To register these with regulator framework instantiate under main device node
+a sub-node named "regulators" with more sub-nodes for each regulator using the
+common regulator binding documented in:
+ - Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Names of regulators supported by different devices:
+	- LDOn
+		  - valid values for n are:
+			- S2MPS11: 1 to 38
+			- S2MPS13: 1 to 40
+			- S2MPS14: 1 to 25
+			- S2MPS15: 1 to 27
+			- S2MPU02: 1 to 28
+		  - Example: LDO1, LDO2, LDO28
+	- BUCKn
+		  - valid values for n are:
+			- S2MPS11: 1 to 10
+			- S2MPS13: 1 to 10
+			- S2MPS14: 1 to 5
+			- S2MPS15: 1 to 10
+			- S2MPU02: 1 to 7
+		  - Example: BUCK1, BUCK2, BUCK9
+Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of device.
+
+
+Optional properties of the nodes under "regulators" sub-node:
+ - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500,
+   25000 (default) or 50000.
+
+   Additionally S2MPS11 supports disabling ramp delay for BUCK{2,3,4,6}
+   by setting it to <0>.
+
+   Note: On S2MPS11 some bucks share the ramp rate setting i.e. same ramp value
+   will be set for a particular group of bucks so provide the same
+   regulator-ramp-delay value for them.
+   Groups sharing ramp rate:
+    - buck{1,6},
+    - buck{3,4},
+    - buck{7,8,10}.
+
+ - samsung,ext-control-gpios: On S2MPS14 the LDO10, LDO11 and LDO12 can be
+   configured to external control over GPIO. To turn this feature on this
+   property must be added to the regulator sub-node:
+    - samsung,ext-control-gpios: GPIO specifier for one GPIO
+                                 controlling this regulator (enable/disable)
+  Example:
+	LDO12 {
+		regulator-name = "V_EMMC_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		samsung,ext-control-gpios = <&gpk0 2 0>;
+	};
+
+
+Example:
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ABB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_ALIVE_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <50000>;
+			};
+		};
+	};

Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt → Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt

-* Samsung S5M8767 Voltage and Current Regulator
-
-The Samsung S5M8767 is a multi-function device which includes voltage and
-current regulators, rtc, charger controller and other sub-blocks. It is
-interfaced to the host controller using a i2c interface. Each sub-block is
-addressed by the host system using different i2c slave address. This document
-describes the bindings for 'pmic' sub-block of s5m8767.
-
-Required properties:
-- compatible: Should be "samsung,s5m8767-pmic".
-- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
-
-- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-  units for buck2 when changing voltage using gpio dvs. Refer to [1] below
-  for additional information.
-
-- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-  units for buck3 when changing voltage using gpio dvs. Refer to [1] below
-  for additional information.
-
-- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
-  units for buck4 when changing voltage using gpio dvs. Refer to [1] below
-  for additional information.
-
-- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
-  for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
-[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-    property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
-    property should specify atleast one voltage level (which would be a
-    safe operating voltage).
-
-    If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
-    property is specified, then all the eight voltage values for the
-    's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
-  the interrupts from s5m8767 are delivered to.
-- interrupts: Interrupt specifiers for two interrupt sources.
-  - First interrupt specifier is for 'irq1' interrupt.
-  - Second interrupt specifier is for 'alert' interrupt.
-- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
-- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
-- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
+Binding for Samsung S5M8767 regulator block
+===========================================
+
+This is a part of device tree bindings for S5M family multi-function devices.
+More information can be found in bindings/mfd/sec-core.txt file.
+
+The S5M8767 device provide buck and LDO regulators.
+
+To register these with regulator framework instantiate under main device node
+a sub-node named "regulators" with more sub-nodes for each regulator using the
+common regulator binding documented in:
+ - Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+   units for buck2 when changing voltage using gpio dvs. Refer to [1] below
+   for additional information.
+
+ - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+   units for buck3 when changing voltage using gpio dvs. Refer to [1] below
+   for additional information.
+
+ - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+   units for buck4 when changing voltage using gpio dvs. Refer to [1] below
+   for additional information.
+
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+   for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+     property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
+     property should specify atleast one voltage level (which would be a
+     safe operating voltage).
+
+     If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+     property is specified, then all the eight voltage values for the
+     's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
+ - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
+ - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
+ - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
 
 Additional properties required if either of the optional properties are used:
 
-- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
-  the possible 8 options selectable by the dvs gpios. The value of this
-  property should be between 0 and 7. If not specified or if out of range, the
-  default value of this property is set to 0.
-
-- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
-  for dvs. The format of the gpio specifier depends in the gpio controller.
-
-Regulators: The regulators of s5m8767 that have to be instantiated should be
-included in a sub-node named 'regulators'. Regulator nodes included in this
-sub-node should be of the format as listed below.
-
-	regulator_name {
-		ldo1_reg: LDO1 {
-			regulator-name = "VDD_ALIVE_1.0V";
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-always-on;
-			regulator-boot-on;
-			op_mode = <1>; /* Normal Mode */
-		};
-	};
-The above regulator entries are defined in regulator bindings documentation
-except these properties:
-	- op_mode: describes the different operating modes of the LDO's with
-		power mode change in SOC. The different possible values are,
-		0 - always off mode
-		1 - on in normal mode
-		2 - low power mode
-		3 - suspend mode
-	- s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
-		GPIO controlling this regulator (enable/disable); This is
-		valid only for buck9.
-
-The following are the names of the regulators that the s5m8767 pmic block
-supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of s5m8767.
+ - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+   the possible 8 options selectable by the dvs gpios. The value of this
+   property should be between 0 and 7. If not specified or if out of range, the
+   default value of this property is set to 0.
+
+ - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
+   for dvs. The format of the gpio specifier depends in the gpio controller.
 
+
+Names of regulators supported by S5M8767 device:
 	- LDOn
 		  - valid values for n are 1 to 28
 		  - Example: LDO1, LDO2, LDO28
 	- BUCKn
 		  - valid values for n are 1 to 9.
 		  - Example: BUCK1, BUCK2, BUCK9
-
-The bindings inside the regulator nodes use the standard regulator bindings
-which are documented elsewhere.
+Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of device.
+
+
+Optional properties of the nodes under "regulators" sub-node:
+ - op_mode: describes the different operating modes of the LDO's with
+            power mode change in SOC. The different possible values are,
+             0 - always off mode
+             1 - on in normal mode
+             2 - low power mode
+             3 - suspend mode
+ - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
+                                   GPIO controlling this regulator
+                                   (enable/disable); This is valid only
+                                   for buck9.
 
 Example:
 

Documentation/devicetree/bindings/sound/wm8994.txt

@@ -30,7 +30,7 @@ Optional properties:
   - #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
     The first cell is the IRQ number.
     The second cell is the flags, encoded as the trigger masks from
-    Documentation/devicetree/bindings/interrupts.txt
+    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 
   - clocks : A list of up to two phandle and clock specifier pairs
   - clock-names : A list of clock names sorted in the same order as clocks.

MAINTAINERS

@@ -9285,8 +9285,10 @@ F:	drivers/regulator/s5m*.c
 F:	drivers/clk/clk-s2mps11.c
 F:	drivers/rtc/rtc-s5m.c
 F:	include/linux/mfd/samsung/
-F:	Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
-F:	Documentation/devicetree/bindings/mfd/s2mp*.txt
+F:	Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
+F:	Documentation/devicetree/bindings/regulator/samsung,s2m*.txt
+F:	Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
+F:	Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
 
 SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS
 M:	Kyungmin Park <kyungmin.park@samsung.com>
@@ -11743,6 +11745,7 @@ F:	drivers/input/touchscreen/wm831x-ts.c
 F:	drivers/input/touchscreen/wm97*.c
 F:	drivers/mfd/arizona*
 F:	drivers/mfd/wm*.c
+F:	drivers/mfd/cs47l24*
 F:	drivers/power/wm83*.c
 F:	drivers/rtc/rtc-wm83*.c
 F:	drivers/regulator/wm8*.c
@@ -11756,6 +11759,7 @@ F:	include/linux/wm97xx.h
 F:	include/sound/wm????.h
 F:	sound/soc/codecs/arizona.?
 F:	sound/soc/codecs/wm*
+F:	sound/soc/codecs/cs47l24*
 
 WORKQUEUE
 M:	Tejun Heo <tj@kernel.org>

drivers/gpio/gpio-arizona.c

@@ -122,6 +122,10 @@ static int arizona_gpio_probe(struct platform_device *pdev)
 	case WM1814:
 		arizona_gpio->gpio_chip.ngpio = 5;
 		break;
+	case WM1831:
+	case CS47L24:
+		arizona_gpio->gpio_chip.ngpio = 2;
+		break;
 	default:
 		dev_err(&pdev->dev, "Unknown chip variant %d\n",
 			arizona->type);

drivers/mfd/88pm80x.c

@@ -135,7 +135,7 @@ EXPORT_SYMBOL_GPL(pm80x_deinit);
 #ifdef CONFIG_PM_SLEEP
 static int pm80x_suspend(struct device *dev)
 {
-	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	struct pm80x_chip *chip = i2c_get_clientdata(client);
 
 	if (chip && chip->wu_flag)
@@ -147,7 +147,7 @@ static int pm80x_suspend(struct device *dev)
 
 static int pm80x_resume(struct device *dev)
 {
-	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	struct pm80x_chip *chip = i2c_get_clientdata(client);
 
 	if (chip && chip->wu_flag)

drivers/mfd/88pm860x-core.c

@@ -705,10 +705,12 @@ int pm8606_osc_disable(struct pm860x_chip *chip, unsigned short client)
 			chip->osc_status);
 
 	mutex_lock(&chip->osc_lock);
-	/*Update voting status */
+	/* Update voting status */
 	chip->osc_vote &= ~(client);
-	/* If reference group is off and this is the last client to release
-	 * - turn off */
+	/*
+	 * If reference group is off and this is the last client to release
+	 * - turn off
+	 */
 	if ((chip->osc_status != PM8606_REF_GP_OSC_OFF) &&
 			(chip->osc_vote == REF_GP_NO_CLIENTS)) {
 		chip->osc_status = PM8606_REF_GP_OSC_UNKNOWN;
@@ -1218,7 +1220,7 @@ static int pm860x_remove(struct i2c_client *client)
 #ifdef CONFIG_PM_SLEEP
 static int pm860x_suspend(struct device *dev)
 {
-	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	struct pm860x_chip *chip = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(dev) && chip->wakeup_flag)
@@ -1228,7 +1230,7 @@ static int pm860x_suspend(struct device *dev)
 
 static int pm860x_resume(struct device *dev)
 {
-	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	struct pm860x_chip *chip = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(dev) && chip->wakeup_flag)
@@ -1265,6 +1267,7 @@ static struct i2c_driver pm860x_driver = {
 static int __init pm860x_i2c_init(void)
 {
 	int ret;
+
 	ret = i2c_add_driver(&pm860x_driver);
 	if (ret != 0)
 		pr_err("Failed to register 88PM860x I2C driver: %d\n", ret);

drivers/mfd/Kconfig

@@ -211,7 +211,7 @@ config MFD_DA9062
 	  of the device.
 
 config MFD_DA9063
-	bool "Dialog Semiconductor DA9063 PMIC Support"
+	tristate "Dialog Semiconductor DA9063 PMIC Support"
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
@@ -1370,24 +1370,30 @@ config MFD_ARIZONA
 	bool
 
 config MFD_ARIZONA_I2C
-	tristate "Wolfson Microelectronics Arizona platform with I2C"
+	tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with I2C"
 	select MFD_ARIZONA
 	select MFD_CORE
 	select REGMAP_I2C
 	depends on I2C
 	help
-	  Support for the Wolfson Microelectronics Arizona platform audio SoC
-	  core functionality controlled via I2C.
+	  Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform
+	  audio SoC core functionality controlled via I2C.
 
 config MFD_ARIZONA_SPI
-	tristate "Wolfson Microelectronics Arizona platform with SPI"
+	tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with SPI"
 	select MFD_ARIZONA
 	select MFD_CORE
 	select REGMAP_SPI
 	depends on SPI_MASTER
 	help
-	  Support for the Wolfson Microelectronics Arizona platform audio SoC
-	  core functionality controlled via I2C.
+	  Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform
+	  audio SoC core functionality controlled via I2C.
+
+config MFD_CS47L24
+	bool "Cirrus Logic CS47L24 and WM1831"
+	depends on MFD_ARIZONA
+	help
+	  Support for Cirrus Logic CS47L24 and WM1831 low power audio SoC
 
 config MFD_WM5102
 	bool "Wolfson Microelectronics WM5102"

drivers/mfd/Makefile

@@ -51,6 +51,9 @@ endif
 ifeq ($(CONFIG_MFD_WM8998),y)
 obj-$(CONFIG_MFD_ARIZONA)	+= wm8998-tables.o
 endif
+ifeq ($(CONFIG_MFD_CS47L24),y)
+obj-$(CONFIG_MFD_ARIZONA)	+= cs47l24-tables.o
+endif
 obj-$(CONFIG_MFD_WM8400)	+= wm8400-core.o
 wm831x-objs			:= wm831x-core.o wm831x-irq.o wm831x-otp.o
 wm831x-objs			+= wm831x-auxadc.o
@@ -61,7 +64,8 @@ wm8350-objs			:= wm8350-core.o wm8350-regmap.o wm8350-gpio.o
 wm8350-objs			+= wm8350-irq.o
 obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
 obj-$(CONFIG_MFD_WM8350_I2C)	+= wm8350-i2c.o
-obj-$(CONFIG_MFD_WM8994)	+= wm8994-core.o wm8994-irq.o wm8994-regmap.o
+wm8994-objs			:= wm8994-core.o wm8994-irq.o wm8994-regmap.o
+obj-$(CONFIG_MFD_WM8994)	+= wm8994.o
 
 obj-$(CONFIG_TPS6105X)		+= tps6105x.o
 obj-$(CONFIG_TPS65010)		+= tps65010.o

drivers/mfd/aat2870-core.c

@@ -373,11 +373,8 @@ static int aat2870_i2c_probe(struct i2c_client *client,
 
 	aat2870 = devm_kzalloc(&client->dev, sizeof(struct aat2870_data),
 				GFP_KERNEL);
-	if (!aat2870) {
-		dev_err(&client->dev,
-			"Failed to allocate memory for aat2870\n");
+	if (!aat2870)
 		return -ENOMEM;
-	}
 
 	aat2870->dev = &client->dev;
 	dev_set_drvdata(aat2870->dev, aat2870);

drivers/mfd/ab3100-core.c

@@ -381,9 +381,11 @@ static int ab3100_event_registers_startup_state_get(struct device *dev,
 					     u8 *event)
 {
 	struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
+
 	if (!ab3100->startup_events_read)
 		return -EAGAIN; /* Try again later */
 	memcpy(event, ab3100->startup_events, 3);
+
 	return 0;
 }
 
@@ -858,10 +860,8 @@ static int ab3100_probe(struct i2c_client *client,
 	int i;
 
 	ab3100 = devm_kzalloc(&client->dev, sizeof(struct ab3100), GFP_KERNEL);
-	if (!ab3100) {
-		dev_err(&client->dev, "could not allocate AB3100 device\n");
+	if (!ab3100)
 		return -ENOMEM;
-	}
 
 	/* Initialize data structure */
 	mutex_init(&ab3100->access_mutex);
@@ -883,20 +883,17 @@ static int ab3100_probe(struct i2c_client *client,
 
 	for (i = 0; ids[i].id != 0x0; i++) {
 		if (ids[i].id == ab3100->chip_id) {
-			if (ids[i].name != NULL) {
-				snprintf(&ab3100->chip_name[0],
-					 sizeof(ab3100->chip_name) - 1,
-					 "AB3100 %s",
-					 ids[i].name);
+			if (ids[i].name)
 				break;
-			} else {
-				dev_err(&client->dev,
-					"AB3000 is not supported\n");
-				goto exit_no_detect;
-			}
+
+			dev_err(&client->dev, "AB3000 is not supported\n");
+			goto exit_no_detect;
 		}
 	}
 
+	snprintf(&ab3100->chip_name[0],
+		 sizeof(ab3100->chip_name) - 1, "AB3100 %s", ids[i].name);
+
 	if (ids[i].id == 0x0) {
 		dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
 			ab3100->chip_id);

drivers/mfd/ab3100-otp.c

@@ -188,10 +188,9 @@ static int __init ab3100_otp_probe(struct platform_device *pdev)
 	int i;
 
 	otp = devm_kzalloc(&pdev->dev, sizeof(struct ab3100_otp), GFP_KERNEL);
-	if (!otp) {
-		dev_err(&pdev->dev, "could not allocate AB3100 OTP device\n");
+	if (!otp)
 		return -ENOMEM;
-	}
+
 	otp->dev = &pdev->dev;
 
 	/* Replace platform data coming in with a local struct */

drivers/mfd/ab8500-debugfs.c

@@ -242,8 +242,10 @@ static struct ab8500_prcmu_ranges ab8500_debug_ranges[AB8500_NUM_BANKS] = {
 				.first = 0x40,
 				.last = 0x44,
 			},
-			/* 0x80-0x8B is SIM registers and should
-			 * not be accessed from here */
+			/*
+			 * 0x80-0x8B are SIM registers and should
+			 * not be accessed from here
+			 */
 		},
 	},
 	[AB8500_USB] = {
@@ -587,8 +589,10 @@ static struct ab8500_prcmu_ranges ab8505_debug_ranges[AB8500_NUM_BANKS] = {
 				.first = 0x40,
 				.last = 0x48,
 			},
-			/* 0x80-0x8B is SIM registers and should
-			 * not be accessed from here */
+			/*
+			 * 0x80-0x8B are SIM registers and should
+			 * not be accessed from here
+			 */
 		},
 	},
 	[AB8500_USB] = {
@@ -1306,8 +1310,10 @@ static int ab8500_registers_print(struct device *dev, u32 bank,
 			if (s) {
 				seq_printf(s, "  [0x%02X/0x%02X]: 0x%02X\n",
 					   bank, reg, value);
-				/* Error is not returned here since
-				 * the output is wanted in any case */
+				/*
+				 * Error is not returned here since
+				 * the output is wanted in any case
+				 */
 				if (seq_has_overflowed(s))
 					return 0;
 			} else {
@@ -2740,10 +2746,9 @@ static ssize_t hwreg_common_write(char *b, struct hwreg_cfg *cfg,
 	*cfg = loc;
 
 #ifdef ABB_HWREG_DEBUG
-	pr_warn("HWREG request: %s, %s,\n"
-		"  addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n",
-		(write) ? "write" : "read",
-		REG_FMT_DEC(cfg) ? "decimal" : "hexa",
+	pr_warn("HWREG request: %s, %s,\n", (write) ? "write" : "read",
+		REG_FMT_DEC(cfg) ? "decimal" : "hexa");
+	pr_warn("  addr=0x%08X, mask=0x%X, shift=%d" "value=0x%X\n",
 		cfg->addr, cfg->mask, cfg->shift, val);
 #endif
 

drivers/mfd/ab8500-gpadc.c

@@ -49,61 +49,61 @@
  * OTP register offsets
  * Bank : 0x15
  */
-#define AB8500_GPADC_CAL_1		0x0F
-#define AB8500_GPADC_CAL_2		0x10
-#define AB8500_GPADC_CAL_3		0x11
-#define AB8500_GPADC_CAL_4		0x12
-#define AB8500_GPADC_CAL_5		0x13
-#define AB8500_GPADC_CAL_6		0x14
-#define AB8500_GPADC_CAL_7		0x15
+#define AB8500_GPADC_CAL_1	0x0F
+#define AB8500_GPADC_CAL_2	0x10
+#define AB8500_GPADC_CAL_3	0x11
+#define AB8500_GPADC_CAL_4	0x12
+#define AB8500_GPADC_CAL_5	0x13
+#define AB8500_GPADC_CAL_6	0x14
+#define AB8500_GPADC_CAL_7	0x15
 /* New calibration for 8540 */
 #define AB8540_GPADC_OTP4_REG_7	0x38
 #define AB8540_GPADC_OTP4_REG_6	0x39
 #define AB8540_GPADC_OTP4_REG_5	0x3A
 
 /* gpadc constants */
-#define EN_VINTCORE12			0x04
-#define EN_VTVOUT			0x02
-#define EN_GPADC			0x01
-#define DIS_GPADC			0x00
-#define AVG_1				0x00
-#define AVG_4				0x20
-#define AVG_8				0x40
-#define AVG_16				0x60
-#define ADC_SW_CONV			0x04
-#define EN_ICHAR			0x80
-#define BTEMP_PULL_UP			0x08
-#define EN_BUF				0x40
-#define DIS_ZERO			0x00
-#define GPADC_BUSY			0x01
-#define EN_FALLING			0x10
-#define EN_TRIG_EDGE			0x02
-#define EN_VBIAS_XTAL_TEMP		0x02
+#define EN_VINTCORE12		0x04
+#define EN_VTVOUT		0x02
+#define EN_GPADC		0x01
+#define DIS_GPADC		0x00
+#define AVG_1			0x00
+#define AVG_4			0x20
+#define AVG_8			0x40
+#define AVG_16			0x60
+#define ADC_SW_CONV		0x04
+#define EN_ICHAR		0x80
+#define BTEMP_PULL_UP		0x08
+#define EN_BUF			0x40
+#define DIS_ZERO		0x00
+#define GPADC_BUSY		0x01
+#define EN_FALLING		0x10
+#define EN_TRIG_EDGE		0x02
+#define EN_VBIAS_XTAL_TEMP	0x02
 
 /* GPADC constants from AB8500 spec, UM0836 */
-#define ADC_RESOLUTION			1024
-#define ADC_CH_BTEMP_MIN		0
-#define ADC_CH_BTEMP_MAX		1350
-#define ADC_CH_DIETEMP_MIN		0
-#define ADC_CH_DIETEMP_MAX		1350
-#define ADC_CH_CHG_V_MIN		0
-#define ADC_CH_CHG_V_MAX		20030
-#define ADC_CH_ACCDET2_MIN		0
-#define ADC_CH_ACCDET2_MAX		2500
-#define ADC_CH_VBAT_MIN			2300
-#define ADC_CH_VBAT_MAX			4800
-#define ADC_CH_CHG_I_MIN		0
-#define ADC_CH_CHG_I_MAX		1500
-#define ADC_CH_BKBAT_MIN		0
-#define ADC_CH_BKBAT_MAX		3200
+#define ADC_RESOLUTION		1024
+#define ADC_CH_BTEMP_MIN	0
+#define ADC_CH_BTEMP_MAX	1350
+#define ADC_CH_DIETEMP_MIN	0
+#define ADC_CH_DIETEMP_MAX	1350
+#define ADC_CH_CHG_V_MIN	0
+#define ADC_CH_CHG_V_MAX	20030
+#define ADC_CH_ACCDET2_MIN	0
+#define ADC_CH_ACCDET2_MAX	2500
+#define ADC_CH_VBAT_MIN		2300
+#define ADC_CH_VBAT_MAX		4800
+#define ADC_CH_CHG_I_MIN	0
+#define ADC_CH_CHG_I_MAX	1500
+#define ADC_CH_BKBAT_MIN	0
+#define ADC_CH_BKBAT_MAX	3200
 
 /* GPADC constants from AB8540 spec */
-#define ADC_CH_IBAT_MIN			(-6000) /* mA range measured by ADC for ibat*/
-#define ADC_CH_IBAT_MAX			6000
-#define ADC_CH_IBAT_MIN_V		(-60)	/* mV range measured by ADC for ibat*/
-#define ADC_CH_IBAT_MAX_V		60
-#define IBAT_VDROP_L			(-56)  /* mV */
-#define IBAT_VDROP_H			56
+#define ADC_CH_IBAT_MIN		(-6000) /* mA range measured by ADC for ibat */
+#define ADC_CH_IBAT_MAX		6000
+#define ADC_CH_IBAT_MIN_V	(-60)	/* mV range measured by ADC for ibat */
+#define ADC_CH_IBAT_MAX_V	60
+#define IBAT_VDROP_L		(-56)  /* mV */
+#define IBAT_VDROP_H		56
 
 /* This is used to not lose precision when dividing to get gain and offset */
 #define CALIB_SCALE		1000
@@ -179,7 +179,7 @@ struct ab8500_gpadc *ab8500_gpadc_get(char *name)
 
 	list_for_each_entry(gpadc, &ab8500_gpadc_list, node) {
 		if (!strcmp(name, dev_name(gpadc->dev)))
-		    return gpadc;
+			return gpadc;
 	}
 
 	return ERR_PTR(-ENOENT);
@@ -315,11 +315,12 @@ int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
 
 	ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
 			trig_edge, trig_timer, conv_type);
-/* On failure retry a second time */
+
+	/* On failure retry a second time */
 	if (ad_value < 0)
 		ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
 			trig_edge, trig_timer, conv_type);
-if (ad_value < 0) {
+	if (ad_value < 0) {
 		dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",
 				channel);
 		return ad_value;
@@ -327,8 +328,9 @@ if (ad_value < 0) {
 
 	voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
 	if (voltage < 0)
-		dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
-			" %d AD: 0x%x\n", channel, ad_value);
+		dev_err(gpadc->dev,
+			"GPADC to voltage conversion failed ch: %d AD: 0x%x\n",
+			channel, ad_value);
 
 	return voltage;
 }
@@ -348,10 +350,9 @@ EXPORT_SYMBOL(ab8500_gpadc_sw_hw_convert);
 int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
 {
-	int raw_data;
-	raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,
-			avg_sample, trig_edge, trig_timer, conv_type, NULL);
-	return raw_data;
+	return ab8500_gpadc_double_read_raw(gpadc, channel, avg_sample,
+					    trig_edge, trig_timer, conv_type,
+					    NULL);
 }
 
 int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
@@ -388,7 +389,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 			goto out;
 		if (!(val & GPADC_BUSY))
 			break;
-		msleep(10);
+		msleep(20);
 	} while (++looplimit < 10);
 	if (looplimit >= 10 && (val & GPADC_BUSY)) {
 		dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
@@ -421,8 +422,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 		val_reg1 |= EN_TRIG_EDGE;
 		if (trig_edge)
 			val_reg1 |= EN_FALLING;
-	}
-	else
+	} else
 		ret = abx500_set_register_interruptible(gpadc->dev,
 				AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
 	if (ret < 0) {
@@ -449,7 +449,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 			* remove when hardware will be availible
 			*/
 			delay_min = 1000; /* Delay in micro seconds */
-			delay_max = 10000; /* large range to optimise sleep mode */
+			delay_max = 10000; /* large range optimises sleepmode */
 			break;
 		}
 		/* Intentional fallthrough */
@@ -785,9 +785,10 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
 				<< CALIB_SHIFT_IBAT)
 				/ (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
 
-			gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;
-			gpadc->cal_data[ADC_INPUT_IBAT].offset = V_offset *
-				V2A_gain + V2A_offset;
+			gpadc->cal_data[ADC_INPUT_IBAT].gain =
+				V_gain * V2A_gain;
+			gpadc->cal_data[ADC_INPUT_IBAT].offset =
+				V_offset * V2A_gain + V2A_offset;
 		} else {
 			gpadc->cal_data[ADC_INPUT_IBAT].gain = 0;
 		}
@@ -923,11 +924,10 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 	int ret = 0;
 	struct ab8500_gpadc *gpadc;
 
-	gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL);
-	if (!gpadc) {
-		dev_err(&pdev->dev, "Error: No memory\n");
+	gpadc = devm_kzalloc(&pdev->dev,
+			     sizeof(struct ab8500_gpadc), GFP_KERNEL);
+	if (!gpadc)
 		return -ENOMEM;
-	}
 
 	gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
 	if (gpadc->irq_sw < 0)
@@ -1072,18 +1072,19 @@ void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
 	*vmain_h = gpadc->cal_data[ADC_INPUT_VMAIN].otp_calib_hi;
 	*btemp_l = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_lo;
 	*btemp_h = gpadc->cal_data[ADC_INPUT_BTEMP].otp_calib_hi;
-	*vbat_l = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
-	*vbat_h = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
-	*ibat_l = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
-	*ibat_h = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
-	return ;
+	*vbat_l  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_lo;
+	*vbat_h  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
+	*ibat_l  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
+	*ibat_h  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
 }
 
 subsys_initcall_sync(ab8500_gpadc_init);
 module_exit(ab8500_gpadc_exit);
 
 MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
-		"M'boumba Cedric Madianga");
+MODULE_AUTHOR("Arun R Murthy");
+MODULE_AUTHOR("Daniel Willerud");
+MODULE_AUTHOR("Johan Palsson");
+MODULE_AUTHOR("M'boumba Cedric Madianga");
 MODULE_ALIAS("platform:ab8500_gpadc");
 MODULE_DESCRIPTION("AB8500 GPADC driver");

drivers/mfd/ab8500-sysctrl.c

@@ -27,7 +27,7 @@ static void ab8500_power_off(void)
 {
 	sigset_t old;
 	sigset_t all;
-	static char *pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};
+	static const char * const pss[] = {"ab8500_ac", "pm2301", "ab8500_usb"};
 	int i;
 	bool charger_present = false;
 	union power_supply_propval val;
@@ -68,10 +68,9 @@ static void ab8500_power_off(void)
 		ret = power_supply_get_property(psy,
 				POWER_SUPPLY_PROP_TECHNOLOGY, &val);
 		if (!ret && val.intval != POWER_SUPPLY_TECHNOLOGY_UNKNOWN) {
-			printk(KERN_INFO
-			       "Charger \"%s\" is connected with known battery."
-			       " Rebooting.\n",
-			       pss[i]);
+			pr_info("Charger '%s' is connected with known battery",
+				pss[i]);
+			pr_info(" - Rebooting.\n");
 			machine_restart("charging");
 		}
 		power_supply_put(psy);
@@ -161,8 +160,8 @@ static int ab8500_sysctrl_probe(struct platform_device *pdev)
 					pdata->initial_req_buf_config[j]);
 			if (ret < 0) {
 				dev_err(&pdev->dev,
-					"unable to set sysClkReq%dRfClkBuf: "
-					"%d\n", j + 1, ret);
+					"Can't set sysClkReq%dRfClkBuf: %d\n",
+					j + 1, ret);
 			}
 		}
 	}

drivers/mfd/adp5520.c

@@ -9,10 +9,10 @@
  *
  * Derived from da903x:
  * Copyright (C) 2008 Compulab, Ltd.
- * 	Mike Rapoport <mike@compulab.co.il>
+ *	Mike Rapoport <mike@compulab.co.il>
  *
  * Copyright (C) 2006-2008 Marvell International Ltd.
- * 	Eric Miao <eric.miao@marvell.com>
+ *	Eric Miao <eric.miao@marvell.com>
  *
  * Licensed under the GPL-2 or later.
  */
@@ -355,7 +355,7 @@ static struct i2c_driver adp5520_driver = {
 	},
 	.probe		= adp5520_probe,
 	.remove		= adp5520_remove,
-	.id_table 	= adp5520_id,
+	.id_table	= adp5520_id,
 };
 
 module_i2c_driver(adp5520_driver);

drivers/mfd/arizona-core.c

@@ -238,7 +238,7 @@ static int arizona_poll_reg(struct arizona *arizona,
 		if ((val & mask) == target)
 			return 0;
 
-		msleep(1);
+		usleep_range(1000, 5000);
 	}
 
 	dev_err(arizona->dev, "Polling reg %u timed out: %x\n", reg, val);
@@ -279,14 +279,14 @@ static void arizona_disable_reset(struct arizona *arizona)
 		case WM5110:
 		case WM8280:
 			/* Meet requirements for minimum reset duration */
-			msleep(5);
+			usleep_range(5000, 10000);
 			break;
 		default:
 			break;
 		}
 
 		gpio_set_value_cansleep(arizona->pdata.reset, 1);
-		msleep(1);
+		usleep_range(1000, 5000);
 	}
 }
 
@@ -598,6 +598,12 @@ static int arizona_runtime_resume(struct device *dev)
 			goto err;
 		}
 		break;
+	case WM1831:
+	case CS47L24:
+		ret = arizona_wait_for_boot(arizona);
+		if (ret != 0)
+			goto err;
+		break;
 	default:
 		ret = arizona_wait_for_boot(arizona);
 		if (ret != 0)
@@ -682,6 +688,9 @@ static int arizona_runtime_suspend(struct device *dev)
 			}
 		}
 		break;
+	case WM1831:
+	case CS47L24:
+		break;
 	default:
 		jd_active = arizona_is_jack_det_active(arizona);
 		if (jd_active < 0)
@@ -852,6 +861,16 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
 		count++;
 	}
 
+	count = 0;
+	of_property_for_each_u32(arizona->dev->of_node, "wlf,out-mono", prop,
+				 cur, val) {
+		if (count == ARRAY_SIZE(pdata->out_mono))
+			break;
+
+		pdata->out_mono[count] = !!val;
+		count++;
+	}
+
 	return 0;
 }
 
@@ -862,6 +881,8 @@ const struct of_device_id arizona_of_match[] = {
 	{ .compatible = "wlf,wm8997", .data = (void *)WM8997 },
 	{ .compatible = "wlf,wm8998", .data = (void *)WM8998 },
 	{ .compatible = "wlf,wm1814", .data = (void *)WM1814 },
+	{ .compatible = "wlf,wm1831", .data = (void *)WM1831 },
+	{ .compatible = "cirrus,cs47l24", .data = (void *)CS47L24 },
 	{},
 };
 EXPORT_SYMBOL_GPL(arizona_of_match);
@@ -919,6 +940,23 @@ static const struct mfd_cell wm5110_devs[] = {
 	},
 };
 
+static const char * const cs47l24_supplies[] = {
+	"MICVDD",
+	"CPVDD",
+	"SPKVDD",
+};
+
+static const struct mfd_cell cs47l24_devs[] = {
+	{ .name = "arizona-gpio" },
+	{ .name = "arizona-haptics" },
+	{ .name = "arizona-pwm" },
+	{
+		.name = "cs47l24-codec",
+		.parent_supplies = cs47l24_supplies,
+		.num_parent_supplies = ARRAY_SIZE(cs47l24_supplies),
+	},
+};
+
 static const char * const wm8997_supplies[] = {
 	"MICVDD",
 	"DBVDD2",
@@ -963,7 +1001,7 @@ static const struct mfd_cell wm8998_devs[] = {
 int arizona_dev_init(struct arizona *arizona)
 {
 	struct device *dev = arizona->dev;
-	const char *type_name;
+	const char *type_name = NULL;
 	unsigned int reg, val, mask;
 	int (*apply_patch)(struct arizona *) = NULL;
 	const struct mfd_cell *subdevs = NULL;
@@ -987,6 +1025,8 @@ int arizona_dev_init(struct arizona *arizona)
 	case WM8997:
 	case WM8998:
 	case WM1814:
+	case WM1831:
+	case CS47L24:
 		for (i = 0; i < ARRAY_SIZE(wm5102_core_supplies); i++)
 			arizona->core_supplies[i].supply
 				= wm5102_core_supplies[i];
@@ -1001,11 +1041,18 @@ int arizona_dev_init(struct arizona *arizona)
 	/* Mark DCVDD as external, LDO1 driver will clear if internal */
 	arizona->external_dcvdd = true;
 
-	ret = mfd_add_devices(arizona->dev, -1, early_devs,
-			      ARRAY_SIZE(early_devs), NULL, 0, NULL);
-	if (ret != 0) {
-		dev_err(dev, "Failed to add early children: %d\n", ret);
-		return ret;
+	switch (arizona->type) {
+	case WM1831:
+	case CS47L24:
+		break; /* No LDO1 regulator */
+	default:
+		ret = mfd_add_devices(arizona->dev, -1, early_devs,
+				      ARRAY_SIZE(early_devs), NULL, 0, NULL);
+		if (ret != 0) {
+			dev_err(dev, "Failed to add early children: %d\n", ret);
+			return ret;
+		}
+		break;
 	}
 
 	ret = devm_regulator_bulk_get(dev, arizona->num_core_supplies,
@@ -1069,6 +1116,7 @@ int arizona_dev_init(struct arizona *arizona)
 	case 0x5102:
 	case 0x5110:
 	case 0x6349:
+	case 0x6363:
 	case 0x8997:
 		break;
 	default:
@@ -1084,7 +1132,7 @@ int arizona_dev_init(struct arizona *arizona)
 			goto err_reset;
 		}
 
-		msleep(1);
+		usleep_range(1000, 5000);
 	}
 
 	/* Ensure device startup is complete */
@@ -1167,6 +1215,30 @@ int arizona_dev_init(struct arizona *arizona)
 			n_subdevs = ARRAY_SIZE(wm5110_devs);
 		}
 		break;
+	case 0x6363:
+		if (IS_ENABLED(CONFIG_MFD_CS47L24)) {
+			switch (arizona->type) {
+			case CS47L24:
+				type_name = "CS47L24";
+				break;
+
+			case WM1831:
+				type_name = "WM1831";
+				break;
+
+			default:
+				dev_warn(arizona->dev,
+					 "CS47L24 registered as %d\n",
+					 arizona->type);
+				arizona->type = CS47L24;
+				break;
+			}
+
+			apply_patch = cs47l24_patch;
+			subdevs = cs47l24_devs;
+			n_subdevs = ARRAY_SIZE(cs47l24_devs);
+		}
+		break;
 	case 0x8997:
 		if (IS_ENABLED(CONFIG_MFD_WM8997)) {
 			type_name = "WM8997";

drivers/mfd/arizona-i2c.c

@@ -88,7 +88,9 @@ static int arizona_i2c_probe(struct i2c_client *i2c,
 static int arizona_i2c_remove(struct i2c_client *i2c)
 {
 	struct arizona *arizona = dev_get_drvdata(&i2c->dev);
+
 	arizona_dev_exit(arizona);
+
 	return 0;
 }
 

drivers/mfd/arizona-irq.c

@@ -30,11 +30,13 @@ static int arizona_map_irq(struct arizona *arizona, int irq)
 {
 	int ret;
 
-	ret = regmap_irq_get_virq(arizona->aod_irq_chip, irq);
-	if (ret < 0)
-		ret = regmap_irq_get_virq(arizona->irq_chip, irq);
+	if (arizona->aod_irq_chip) {
+		ret = regmap_irq_get_virq(arizona->aod_irq_chip, irq);
+		if (ret >= 0)
+			return ret;
+	}
 
-	return ret;
+	return regmap_irq_get_virq(arizona->irq_chip, irq);
 }
 
 int arizona_request_irq(struct arizona *arizona, int irq, char *name,
@@ -107,8 +109,8 @@ static irqreturn_t arizona_irq_thread(int irq, void *data)
 	do {
 		poll = false;
 
-		/* Always handle the AoD domain */
-		handle_nested_irq(irq_find_mapping(arizona->virq, 0));
+		if (arizona->aod_irq_chip)
+			handle_nested_irq(irq_find_mapping(arizona->virq, 0));
 
 		/*
 		 * Check if one of the main interrupts is asserted and only
@@ -219,6 +221,15 @@ int arizona_irq_init(struct arizona *arizona)
 		arizona->ctrlif_error = false;
 		break;
 #endif
+#ifdef CONFIG_MFD_CS47L24
+	case WM1831:
+	case CS47L24:
+		aod = NULL;
+		irq = &cs47l24_irq;
+
+		arizona->ctrlif_error = false;
+		break;
+#endif
 #ifdef CONFIG_MFD_WM8997
 	case WM8997:
 		aod = &wm8997_aod;
@@ -291,13 +302,16 @@ int arizona_irq_init(struct arizona *arizona)
 		goto err;
 	}
 
-	ret = regmap_add_irq_chip(arizona->regmap,
-				  irq_create_mapping(arizona->virq, 0),
-				  IRQF_ONESHOT, 0, aod,
-				  &arizona->aod_irq_chip);
-	if (ret != 0) {
-		dev_err(arizona->dev, "Failed to add AOD IRQs: %d\n", ret);
-		goto err_domain;
+	if (aod) {
+		ret = regmap_add_irq_chip(arizona->regmap,
+					  irq_create_mapping(arizona->virq, 0),
+					  IRQF_ONESHOT, 0, aod,
+					  &arizona->aod_irq_chip);
+		if (ret != 0) {
+			dev_err(arizona->dev,
+				"Failed to add AOD IRQs: %d\n", ret);
+			goto err;
+		}
 	}
 
 	ret = regmap_add_irq_chip(arizona->regmap,
@@ -309,30 +323,6 @@ int arizona_irq_init(struct arizona *arizona)
 		goto err_aod;
 	}
 
-	/* Make sure the boot done IRQ is unmasked for resumes */
-	i = arizona_map_irq(arizona, ARIZONA_IRQ_BOOT_DONE);
-	ret = request_threaded_irq(i, NULL, arizona_boot_done, IRQF_ONESHOT,
-				   "Boot done", arizona);
-	if (ret != 0) {
-		dev_err(arizona->dev, "Failed to request boot done %d: %d\n",
-			arizona->irq, ret);
-		goto err_boot_done;
-	}
-
-	/* Handle control interface errors in the core */
-	if (arizona->ctrlif_error) {
-		i = arizona_map_irq(arizona, ARIZONA_IRQ_CTRLIF_ERR);
-		ret = request_threaded_irq(i, NULL, arizona_ctrlif_err,
-					   IRQF_ONESHOT,
-					   "Control interface error", arizona);
-		if (ret != 0) {
-			dev_err(arizona->dev,
-				"Failed to request CTRLIF_ERR %d: %d\n",
-				arizona->irq, ret);
-			goto err_ctrlif;
-		}
-	}
-
 	/* Used to emulate edge trigger and to work around broken pinmux */
 	if (arizona->pdata.irq_gpio) {
 		if (gpio_to_irq(arizona->pdata.irq_gpio) != arizona->irq) {
@@ -362,21 +352,42 @@ int arizona_irq_init(struct arizona *arizona)
 		goto err_main_irq;
 	}
 
+	/* Make sure the boot done IRQ is unmasked for resumes */
+	i = arizona_map_irq(arizona, ARIZONA_IRQ_BOOT_DONE);
+	ret = request_threaded_irq(i, NULL, arizona_boot_done, IRQF_ONESHOT,
+				   "Boot done", arizona);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to request boot done %d: %d\n",
+			arizona->irq, ret);
+		goto err_boot_done;
+	}
+
+	/* Handle control interface errors in the core */
+	if (arizona->ctrlif_error) {
+		i = arizona_map_irq(arizona, ARIZONA_IRQ_CTRLIF_ERR);
+		ret = request_threaded_irq(i, NULL, arizona_ctrlif_err,
+					   IRQF_ONESHOT,
+					   "Control interface error", arizona);
+		if (ret != 0) {
+			dev_err(arizona->dev,
+				"Failed to request CTRLIF_ERR %d: %d\n",
+				arizona->irq, ret);
+			goto err_ctrlif;
+		}
+	}
+
 	return 0;
 
-err_main_irq:
-	if (arizona->ctrlif_error)
-		free_irq(arizona_map_irq(arizona, ARIZONA_IRQ_CTRLIF_ERR),
-			 arizona);
 err_ctrlif:
 	free_irq(arizona_map_irq(arizona, ARIZONA_IRQ_BOOT_DONE), arizona);
 err_boot_done:
+	free_irq(arizona->irq, arizona);
+err_main_irq:
 	regmap_del_irq_chip(irq_create_mapping(arizona->virq, 1),
 			    arizona->irq_chip);
 err_aod:
 	regmap_del_irq_chip(irq_create_mapping(arizona->virq, 0),
 			    arizona->aod_irq_chip);
-err_domain:
 err:
 	return ret;
 }

drivers/mfd/arizona-spi.c

@@ -46,6 +46,11 @@ static int arizona_spi_probe(struct spi_device *spi)
 		if (IS_ENABLED(CONFIG_MFD_WM5110))
 			regmap_config = &wm5110_spi_regmap;
 		break;
+	case WM1831:
+	case CS47L24:
+		if (IS_ENABLED(CONFIG_MFD_CS47L24))
+			regmap_config = &cs47l24_spi_regmap;
+		break;
 	default:
 		dev_err(&spi->dev, "Unknown device type %ld\n", type);
 		return -EINVAL;
@@ -89,6 +94,8 @@ static const struct spi_device_id arizona_spi_ids[] = {
 	{ "wm5102", WM5102 },
 	{ "wm5110", WM5110 },
 	{ "wm8280", WM8280 },
+	{ "wm1831", WM1831 },
+	{ "cs47l24", CS47L24 },
 	{ },
 };
 MODULE_DEVICE_TABLE(spi, arizona_spi_ids);

drivers/mfd/arizona.h

@@ -25,6 +25,8 @@ extern const struct regmap_config wm5102_spi_regmap;
 extern const struct regmap_config wm5110_i2c_regmap;
 extern const struct regmap_config wm5110_spi_regmap;
 
+extern const struct regmap_config cs47l24_spi_regmap;
+
 extern const struct regmap_config wm8997_i2c_regmap;
 
 extern const struct regmap_config wm8998_i2c_regmap;
@@ -40,6 +42,8 @@ extern const struct regmap_irq_chip wm5110_aod;
 extern const struct regmap_irq_chip wm5110_irq;
 extern const struct regmap_irq_chip wm5110_revd_irq;
 
+extern const struct regmap_irq_chip cs47l24_irq;
+
 extern const struct regmap_irq_chip wm8997_aod;
 extern const struct regmap_irq_chip wm8997_irq;
 

drivers/mfd/as3711.c

@@ -136,17 +136,13 @@ static int as3711_i2c_probe(struct i2c_client *client,
 	} else {
 		pdata = devm_kzalloc(&client->dev,
 				     sizeof(*pdata), GFP_KERNEL);
-		if (!pdata) {
-			dev_err(&client->dev, "Failed to allocate pdata\n");
+		if (!pdata)
 			return -ENOMEM;
-		}
 	}
 
 	as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL);
-	if (!as3711) {
-		dev_err(&client->dev, "Memory allocation failed\n");
+	if (!as3711)
 		return -ENOMEM;
-	}
 
 	as3711->dev = &client->dev;
 	i2c_set_clientdata(client, as3711);
@@ -157,7 +153,8 @@ static int as3711_i2c_probe(struct i2c_client *client,
 	as3711->regmap = devm_regmap_init_i2c(client, &as3711_regmap_config);
 	if (IS_ERR(as3711->regmap)) {
 		ret = PTR_ERR(as3711->regmap);
-		dev_err(&client->dev, "regmap initialization failed: %d\n", ret);
+		dev_err(&client->dev,
+			"regmap initialization failed: %d\n", ret);
 		return ret;
 	}
 
@@ -172,12 +169,19 @@ static int as3711_i2c_probe(struct i2c_client *client,
 		return -ENODEV;
 	dev_info(as3711->dev, "AS3711 detected: %x:%x\n", id1, id2);
 
-	/* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */
+	/*
+	 * We can reuse as3711_subdevs[],
+	 * it will be copied in mfd_add_devices()
+	 */
 	if (pdata) {
-		as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator;
-		as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator);
-		as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight;
-		as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight);
+		as3711_subdevs[AS3711_REGULATOR].platform_data =
+			&pdata->regulator;
+		as3711_subdevs[AS3711_REGULATOR].pdata_size =
+			sizeof(pdata->regulator);
+		as3711_subdevs[AS3711_BACKLIGHT].platform_data =
+			&pdata->backlight;
+		as3711_subdevs[AS3711_BACKLIGHT].pdata_size =
+			sizeof(pdata->backlight);
 	} else {
 		as3711_subdevs[AS3711_REGULATOR].platform_data = NULL;
 		as3711_subdevs[AS3711_REGULATOR].pdata_size = 0;

drivers/mfd/as3722.c

@@ -405,6 +405,8 @@ static int as3722_i2c_probe(struct i2c_client *i2c,
 		goto scrub;
 	}
 
+	device_init_wakeup(as3722->dev, true);
+
 	dev_dbg(as3722->dev, "AS3722 core driver initialized successfully\n");
 	return 0;
 
@@ -422,6 +424,29 @@ static int as3722_i2c_remove(struct i2c_client *i2c)
 	return 0;
 }
 
+static int __maybe_unused as3722_i2c_suspend(struct device *dev)
+{
+	struct as3722 *as3722 = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(as3722->chip_irq);
+	disable_irq(as3722->chip_irq);
+
+	return 0;
+}
+
+static int __maybe_unused as3722_i2c_resume(struct device *dev)
+{
+	struct as3722 *as3722 = dev_get_drvdata(dev);
+
+	enable_irq(as3722->chip_irq);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(as3722->chip_irq);
+
+	return 0;
+}
+
 static const struct of_device_id as3722_of_match[] = {
 	{ .compatible = "ams,as3722", },
 	{},
@@ -434,10 +459,15 @@ static const struct i2c_device_id as3722_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, as3722_i2c_id);
 
+static const struct dev_pm_ops as3722_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(as3722_i2c_suspend, as3722_i2c_resume)
+};
+
 static struct i2c_driver as3722_i2c_driver = {
 	.driver = {
 		.name = "as3722",
 		.of_match_table = as3722_of_match,
+		.pm = &as3722_pm_ops,
 	},
 	.probe = as3722_i2c_probe,
 	.remove = as3722_i2c_remove,

drivers/mfd/asic3.c

@@ -167,7 +167,6 @@ static void asic3_irq_demux(struct irq_desc *desc)
 
 				base = ASIC3_GPIO_A_BASE
 				       + bank * ASIC3_GPIO_BASE_INCR;
-
 				spin_lock_irqsave(&asic->lock, flags);
 				istat = asic3_read_register(asic,
 							    base +
@@ -502,7 +501,8 @@ static int asic3_gpio_get(struct gpio_chip *chip,
 		return -EINVAL;
 	}
 
-	return asic3_read_register(asic, gpio_base + ASIC3_GPIO_STATUS) & mask;
+	return !!(asic3_read_register(asic,
+				      gpio_base + ASIC3_GPIO_STATUS) & mask);
 }
 
 static void asic3_gpio_set(struct gpio_chip *chip,
@@ -536,8 +536,6 @@ static void asic3_gpio_set(struct gpio_chip *chip,
 	asic3_write_register(asic, gpio_base + ASIC3_GPIO_OUT, out_reg);
 
 	spin_unlock_irqrestore(&asic->lock, flags);
-
-	return;
 }
 
 static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
@@ -665,18 +663,18 @@ static int ds1wm_enable(struct platform_device *pdev)
 	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
 	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
 	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
-	msleep(1);
+	usleep_range(1000, 5000);
 
 	/* Reset and enable DS1WM */
 	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
 			   ASIC3_EXTCF_OWM_RESET, 1);
-	msleep(1);
+	usleep_range(1000, 5000);
 	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
 			   ASIC3_EXTCF_OWM_RESET, 0);
-	msleep(1);
+	usleep_range(1000, 5000);
 	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
 			   ASIC3_EXTCF_OWM_EN, 1);
-	msleep(1);
+	usleep_range(1000, 5000);
 
 	return 0;
 }
@@ -757,7 +755,7 @@ static int asic3_mmc_enable(struct platform_device *pdev)
 	 * when HCLK is stopped.
 	 */
 	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
-	msleep(1);
+	usleep_range(1000, 5000);
 
 	/* HCLK 24.576 MHz, BCLK 12.288 MHz: */
 	asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL),
@@ -765,7 +763,7 @@ static int asic3_mmc_enable(struct platform_device *pdev)
 
 	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]);
 	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]);
-	msleep(1);
+	usleep_range(1000, 5000);
 
 	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
 			   ASIC3_EXTCF_SD_MEM_ENABLE, 1);
@@ -841,7 +839,7 @@ static int asic3_leds_suspend(struct platform_device *pdev)
 	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
 
 	while (asic3_gpio_get(&asic->gpio, ASIC3_GPIO(C, cell->id)) != 0)
-		msleep(1);
+		usleep_range(1000, 5000);
 
 	asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]);
 
@@ -900,8 +898,8 @@ static int __init asic3_mfd_probe(struct platform_device *pdev,
 
 	/* MMC */
 	if (mem_sdio) {
-		asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) +
-				 mem_sdio->start,
+		asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >>
+					  asic->bus_shift) + mem_sdio->start,
 				 ASIC3_SD_CONFIG_SIZE >> asic->bus_shift);
 		if (!asic->tmio_cnf) {
 			ret = -ENOMEM;
@@ -962,10 +960,8 @@ static int __init asic3_probe(struct platform_device *pdev)
 
 	asic = devm_kzalloc(&pdev->dev,
 			    sizeof(struct asic3), GFP_KERNEL);
-	if (asic == NULL) {
-		printk(KERN_ERR "kzalloc failed\n");
+	if (!asic)
 		return -ENOMEM;
-	}
 
 	spin_lock_init(&asic->lock);
 	platform_set_drvdata(pdev, asic);
@@ -1074,7 +1070,9 @@ static struct platform_driver asic3_device_driver = {
 static int __init asic3_init(void)
 {
 	int retval = 0;
+
 	retval = platform_driver_probe(&asic3_device_driver, asic3_probe);
+
 	return retval;
 }
 

drivers/mfd/cros_ec_i2c.c

@@ -292,7 +292,7 @@ static int cros_ec_i2c_probe(struct i2c_client *client,
 	struct cros_ec_device *ec_dev = NULL;
 	int err;
 
- 	ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
+	ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
 	if (!ec_dev)
 		return -ENOMEM;
 

drivers/mfd/cros_ec_spi.c

@@ -113,7 +113,7 @@ static int terminate_request(struct cros_ec_device *ec_dev)
 	trans.delay_usecs = ec_spi->end_of_msg_delay;
 	spi_message_add_tail(&trans, &msg);
 
-	ret = spi_sync(ec_spi->spi, &msg);
+	ret = spi_sync_locked(ec_spi->spi, &msg);
 
 	/* Reset end-of-response timer */
 	ec_spi->last_transfer_ns = ktime_get_ns();
@@ -147,7 +147,7 @@ static int receive_n_bytes(struct cros_ec_device *ec_dev, u8 *buf, int n)
 
 	spi_message_init(&msg);
 	spi_message_add_tail(&trans, &msg);
-	ret = spi_sync(ec_spi->spi, &msg);
+	ret = spi_sync_locked(ec_spi->spi, &msg);
 	if (ret < 0)
 		dev_err(ec_dev->dev, "spi transfer failed: %d\n", ret);
 
@@ -175,7 +175,7 @@ static int cros_ec_spi_receive_packet(struct cros_ec_device *ec_dev,
 	unsigned long deadline;
 	int todo;
 
-	BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);
+	BUG_ON(ec_dev->din_size < EC_MSG_PREAMBLE_COUNT);
 
 	/* Receive data until we see the header byte */
 	deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
@@ -283,7 +283,7 @@ static int cros_ec_spi_receive_response(struct cros_ec_device *ec_dev,
 	unsigned long deadline;
 	int todo;
 
-	BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size);
+	BUG_ON(ec_dev->din_size < EC_MSG_PREAMBLE_COUNT);
 
 	/* Receive data until we see the header byte */
 	deadline = jiffies + msecs_to_jiffies(EC_MSG_DEADLINE_MS);
@@ -391,10 +391,10 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
 	}
 
 	rx_buf = kzalloc(len, GFP_KERNEL);
-	if (!rx_buf) {
-		ret = -ENOMEM;
-		goto exit;
-	}
+	if (!rx_buf)
+		return -ENOMEM;
+
+	spi_bus_lock(ec_spi->spi->master);
 
 	/*
 	 * Leave a gap between CS assertion and clocking of data to allow the
@@ -414,7 +414,7 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
 	trans.len = len;
 	trans.cs_change = 1;
 	spi_message_add_tail(&trans, &msg);
-	ret = spi_sync(ec_spi->spi, &msg);
+	ret = spi_sync_locked(ec_spi->spi, &msg);
 
 	/* Get the response */
 	if (!ret) {
@@ -440,6 +440,9 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
 	}
 
 	final_ret = terminate_request(ec_dev);
+
+	spi_bus_unlock(ec_spi->spi->master);
+
 	if (!ret)
 		ret = final_ret;
 	if (ret < 0)
@@ -520,10 +523,10 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
 	}
 
 	rx_buf = kzalloc(len, GFP_KERNEL);
-	if (!rx_buf) {
-		ret = -ENOMEM;
-		goto exit;
-	}
+	if (!rx_buf)
+		return -ENOMEM;
+
+	spi_bus_lock(ec_spi->spi->master);
 
 	/* Transmit phase - send our message */
 	debug_packet(ec_dev->dev, "out", ec_dev->dout, len);
@@ -534,7 +537,7 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
 	trans.cs_change = 1;
 	spi_message_init(&msg);
 	spi_message_add_tail(&trans, &msg);
-	ret = spi_sync(ec_spi->spi, &msg);
+	ret = spi_sync_locked(ec_spi->spi, &msg);
 
 	/* Get the response */
 	if (!ret) {
@@ -560,6 +563,9 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
 	}
 
 	final_ret = terminate_request(ec_dev);
+
+	spi_bus_unlock(ec_spi->spi->master);
+
 	if (!ret)
 		ret = final_ret;
 	if (ret < 0)

drivers/mfd/cs5535-mfd.c

@@ -60,6 +60,7 @@ static int cs5535_mfd_res_enable(struct platform_device *pdev)
 static int cs5535_mfd_res_disable(struct platform_device *pdev)
 {
 	struct resource *res;
+
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "can't fetch device resource info\n");
@@ -114,7 +115,10 @@ static struct mfd_cell cs5535_mfd_cells[] = {
 #ifdef CONFIG_OLPC
 static void cs5535_clone_olpc_cells(void)
 {
-	const char *acpi_clones[] = { "olpc-xo1-pm-acpi", "olpc-xo1-sci-acpi" };
+	static const char *acpi_clones[] = {
+		"olpc-xo1-pm-acpi",
+		"olpc-xo1-sci-acpi"
+	};
 
 	if (!machine_is_olpc())
 		return;

drivers/mfd/da903x.c

@@ -2,10 +2,10 @@
  * Base driver for Dialog Semiconductor DA9030/DA9034
  *
  * Copyright (C) 2008 Compulab, Ltd.
- * 	Mike Rapoport <mike@compulab.co.il>
+ *	Mike Rapoport <mike@compulab.co.il>
  *
  * Copyright (C) 2006-2008 Marvell International Ltd.
- * 	Eric Miao <eric.miao@marvell.com>
+ *	Eric Miao <eric.miao@marvell.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -60,7 +60,7 @@ struct da903x_chip_ops {
 struct da903x_chip {
 	struct i2c_client	*client;
 	struct device		*dev;
-	struct da903x_chip_ops	*ops;
+	const struct da903x_chip_ops *ops;
 
 	int			type;
 	uint32_t		events_mask;
@@ -424,7 +424,7 @@ static irqreturn_t da903x_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static struct da903x_chip_ops da903x_ops[] = {
+static const struct da903x_chip_ops da903x_ops[] = {
 	[0] = {
 		.init_chip	= da9030_init_chip,
 		.unmask_events	= da9030_unmask_events,
@@ -565,6 +565,6 @@ static void __exit da903x_exit(void)
 module_exit(da903x_exit);
 
 MODULE_DESCRIPTION("PMIC Driver for Dialog Semiconductor DA9034");
-MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
-	      "Mike Rapoport <mike@compulab.co.il>");
-MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_LICENSE("GPL v2");

drivers/mfd/da9052-i2c.c

@@ -70,7 +70,7 @@ static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
 	case DA9053_BA:
 	case DA9053_BB:
 		/* A dummy read to a safe register address. */
-	if (!i2c_safe_reg(reg))
+		if (!i2c_safe_reg(reg))
 			return regmap_read(da9052->regmap,
 					   DA9052_PARK_REGISTER,
 					   &val);

drivers/mfd/da9052-irq.c

@@ -283,7 +283,7 @@ int da9052_irq_init(struct da9052 *da9052)
 
 int da9052_irq_exit(struct da9052 *da9052)
 {
-	da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM , da9052);
+	da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM, da9052);
 	regmap_del_irq_chip(da9052->chip_irq, da9052->irq_data);
 
 	return 0;

drivers/mfd/davinci_voicecodec.c

@@ -47,11 +47,8 @@ static int __init davinci_vc_probe(struct platform_device *pdev)
 
 	davinci_vc = devm_kzalloc(&pdev->dev,
 				  sizeof(struct davinci_vc), GFP_KERNEL);
-	if (!davinci_vc) {
-		dev_dbg(&pdev->dev,
-			    "could not allocate memory for private data\n");
+	if (!davinci_vc)
 		return -ENOMEM;
-	}
 
 	davinci_vc->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(davinci_vc->clk)) {

drivers/mfd/dm355evm_msp.c

@@ -147,7 +147,7 @@ static int msp_gpio_get(struct gpio_chip *chip, unsigned offset)
 		return status;
 	if (reg == DM355EVM_MSP_LED)
 		msp_led_cache = status;
-	return status & MSP_GPIO_MASK(offset);
+	return !!(status & MSP_GPIO_MASK(offset));
 }
 
 static int msp_gpio_out(struct gpio_chip *chip, unsigned offset, int value)

drivers/mfd/htc-egpio.c

@@ -163,7 +163,7 @@ static int egpio_get(struct gpio_chip *chip, unsigned offset)
 	value = egpio_readw(ei, reg);
 	pr_debug("readw(%p + %x) = %x\n",
 			ei->base_addr, reg << ei->bus_shift, value);
-	return value & bit;
+	return !!(value & bit);
 }
 
 static int egpio_direction_input(struct gpio_chip *chip, unsigned offset)

drivers/mfd/lpc_ich.c

@@ -55,6 +55,7 @@
  *	document number TBD : Coleto Creek
  *	document number TBD : Wildcat Point-LP
  *	document number TBD : 9 Series
+ *	document number TBD : Lewisburg
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -213,6 +214,7 @@ enum lpc_chipsets {
 	LPC_COLETO,	/* Coleto Creek */
 	LPC_WPT_LP,	/* Wildcat Point-LP */
 	LPC_BRASWELL,	/* Braswell SoC */
+	LPC_LEWISBURG,	/* Lewisburg */
 	LPC_9S,		/* 9 Series */
 };
 
@@ -521,6 +523,10 @@ static struct lpc_ich_info lpc_chipset_info[] = {
 		.name = "Braswell SoC",
 		.iTCO_version = 3,
 	},
+	[LPC_LEWISBURG] = {
+		.name = "Lewisburg",
+		.iTCO_version = 2,
+	},
 	[LPC_9S] = {
 		.name = "9 Series",
 		.iTCO_version = 2,
@@ -757,6 +763,15 @@ static const struct pci_device_id lpc_ich_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x9cc6), LPC_WPT_LP},
 	{ PCI_VDEVICE(INTEL, 0x9cc7), LPC_WPT_LP},
 	{ PCI_VDEVICE(INTEL, 0x9cc9), LPC_WPT_LP},
+	{ PCI_VDEVICE(INTEL, 0xa1c1), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa1c2), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa1c3), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa1c4), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa1c5), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa1c6), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa1c7), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa242), LPC_LEWISBURG},
+	{ PCI_VDEVICE(INTEL, 0xa243), LPC_LEWISBURG},
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE(pci, lpc_ich_ids);

drivers/mfd/max14577.c

@@ -495,7 +495,7 @@ MODULE_DEVICE_TABLE(i2c, max14577_i2c_id);
 #ifdef CONFIG_PM_SLEEP
 static int max14577_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max14577 *max14577 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
@@ -516,7 +516,7 @@ static int max14577_suspend(struct device *dev)
 
 static int max14577_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max14577 *max14577 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))

drivers/mfd/max77686.c

@@ -352,7 +352,7 @@ MODULE_DEVICE_TABLE(i2c, max77686_i2c_id);
 #ifdef CONFIG_PM_SLEEP
 static int max77686_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
@@ -374,7 +374,7 @@ static int max77686_suspend(struct device *dev)
 
 static int max77686_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max77686_dev *max77686 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))

drivers/mfd/max77693.c

@@ -334,7 +334,7 @@ MODULE_DEVICE_TABLE(i2c, max77693_i2c_id);
 
 static int max77693_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max77693_dev *max77693 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev)) {
@@ -347,7 +347,7 @@ static int max77693_suspend(struct device *dev)
 
 static int max77693_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max77693_dev *max77693 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev)) {

drivers/mfd/max77843.c

@@ -197,7 +197,7 @@ MODULE_DEVICE_TABLE(i2c, max77843_id);
 
 static int __maybe_unused max77843_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
 
 	disable_irq(max77843->irq);
@@ -209,7 +209,7 @@ static int __maybe_unused max77843_suspend(struct device *dev)
 
 static int __maybe_unused max77843_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max77693_dev *max77843 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))

drivers/mfd/max8925-i2c.c

@@ -215,7 +215,7 @@ static int max8925_remove(struct i2c_client *client)
 #ifdef CONFIG_PM_SLEEP
 static int max8925_suspend(struct device *dev)
 {
-	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	struct max8925_chip *chip = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(dev) && chip->wakeup_flag)
@@ -225,7 +225,7 @@ static int max8925_suspend(struct device *dev)
 
 static int max8925_resume(struct device *dev)
 {
-	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *client = to_i2c_client(dev);
 	struct max8925_chip *chip = i2c_get_clientdata(client);
 
 	if (device_may_wakeup(dev) && chip->wakeup_flag)

drivers/mfd/max8997.c

@@ -437,7 +437,7 @@ static u8 max8997_dumpaddr_haptic[] = {
 
 static int max8997_freeze(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
 	int i;
 
@@ -459,7 +459,7 @@ static int max8997_freeze(struct device *dev)
 
 static int max8997_restore(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
 	int i;
 
@@ -481,7 +481,7 @@ static int max8997_restore(struct device *dev)
 
 static int max8997_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
@@ -491,7 +491,7 @@ static int max8997_suspend(struct device *dev)
 
 static int max8997_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))

drivers/mfd/max8998.c

@@ -274,7 +274,7 @@ MODULE_DEVICE_TABLE(i2c, max8998_i2c_id);
 
 static int max8998_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8998_dev *max8998 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
@@ -284,7 +284,7 @@ static int max8998_suspend(struct device *dev)
 
 static int max8998_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8998_dev *max8998 = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
@@ -344,7 +344,7 @@ static struct max8998_reg_dump max8998_dump[] = {
 /* Save registers before hibernation */
 static int max8998_freeze(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(max8998_dump); i++)
@@ -357,7 +357,7 @@ static int max8998_freeze(struct device *dev)
 /* Restore registers after hibernation */
 static int max8998_restore(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(max8998_dump); i++)

drivers/mfd/mc13xxx-core.c

@@ -383,16 +383,16 @@ static int mc13xxx_probe_flags_dt(struct mc13xxx *mc13xxx)
 	if (!np)
 		return -ENODEV;
 
-	if (of_get_property(np, "fsl,mc13xxx-uses-adc", NULL))
+	if (of_property_read_bool(np, "fsl,mc13xxx-uses-adc"))
 		mc13xxx->flags |= MC13XXX_USE_ADC;
 
-	if (of_get_property(np, "fsl,mc13xxx-uses-codec", NULL))
+	if (of_property_read_bool(np, "fsl,mc13xxx-uses-codec"))
 		mc13xxx->flags |= MC13XXX_USE_CODEC;
 
-	if (of_get_property(np, "fsl,mc13xxx-uses-rtc", NULL))
+	if (of_property_read_bool(np, "fsl,mc13xxx-uses-rtc"))
 		mc13xxx->flags |= MC13XXX_USE_RTC;
 
-	if (of_get_property(np, "fsl,mc13xxx-uses-touch", NULL))
+	if (of_property_read_bool(np, "fsl,mc13xxx-uses-touch"))
 		mc13xxx->flags |= MC13XXX_USE_TOUCHSCREEN;
 
 	return 0;

drivers/mfd/qcom-spmi-pmic.c

@@ -127,7 +127,9 @@ static int pmic_spmi_probe(struct spmi_device *sdev)
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-	pmic_spmi_show_revid(regmap, &sdev->dev);
+	/* Only the first slave id for a PMIC contains this information */
+	if (sdev->usid % 2 == 0)
+		pmic_spmi_show_revid(regmap, &sdev->dev);
 
 	return of_platform_populate(root, NULL, NULL, &sdev->dev);
 }

drivers/mfd/qcom_rpm.c

@@ -495,6 +495,8 @@ static int qcom_rpm_probe(struct platform_device *pdev)
 	}
 
 	match = of_match_device(qcom_rpm_of_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
 	rpm->data = match->data;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

drivers/mfd/sec-core.c

@@ -29,6 +29,7 @@
 #include <linux/mfd/samsung/s2mps11.h>
 #include <linux/mfd/samsung/s2mps13.h>
 #include <linux/mfd/samsung/s2mps14.h>
+#include <linux/mfd/samsung/s2mps15.h>
 #include <linux/mfd/samsung/s2mpu02.h>
 #include <linux/mfd/samsung/s5m8763.h>
 #include <linux/mfd/samsung/s5m8767.h>
@@ -67,7 +68,7 @@ static const struct mfd_cell s5m8767_devs[] = {
 
 static const struct mfd_cell s2mps11_devs[] = {
 	{
-		.name = "s2mps11-pmic",
+		.name = "s2mps11-regulator",
 	}, {
 		.name = "s2mps14-rtc",
 	}, {
@@ -77,7 +78,7 @@ static const struct mfd_cell s2mps11_devs[] = {
 };
 
 static const struct mfd_cell s2mps13_devs[] = {
-	{ .name = "s2mps13-pmic", },
+	{ .name = "s2mps13-regulator", },
 	{ .name = "s2mps13-rtc", },
 	{
 		.name = "s2mps13-clk",
@@ -87,7 +88,7 @@ static const struct mfd_cell s2mps13_devs[] = {
 
 static const struct mfd_cell s2mps14_devs[] = {
 	{
-		.name = "s2mps14-pmic",
+		.name = "s2mps14-regulator",
 	}, {
 		.name = "s2mps14-rtc",
 	}, {
@@ -96,6 +97,17 @@ static const struct mfd_cell s2mps14_devs[] = {
 	}
 };
 
+static const struct mfd_cell s2mps15_devs[] = {
+	{
+		.name = "s2mps15-regulator",
+	}, {
+		.name = "s2mps15-rtc",
+	}, {
+		.name = "s2mps13-clk",
+		.of_compatible = "samsung,s2mps13-clk",
+	},
+};
+
 static const struct mfd_cell s2mpa01_devs[] = {
 	{
 		.name = "s2mpa01-pmic",
@@ -104,7 +116,7 @@ static const struct mfd_cell s2mpa01_devs[] = {
 
 static const struct mfd_cell s2mpu02_devs[] = {
 	{
-		.name = "s2mpu02-pmic",
+		.name = "s2mpu02-regulator",
 	},
 };
 
@@ -121,6 +133,9 @@ static const struct of_device_id sec_dt_match[] = {
 	}, {
 		.compatible = "samsung,s2mps14-pmic",
 		.data = (void *)S2MPS14X,
+	}, {
+		.compatible = "samsung,s2mps15-pmic",
+		.data = (void *)S2MPS15X,
 	}, {
 		.compatible = "samsung,s2mpa01-pmic",
 		.data = (void *)S2MPA01,
@@ -223,6 +238,15 @@ static const struct regmap_config s2mps14_regmap_config = {
 	.cache_type = REGCACHE_FLAT,
 };
 
+static const struct regmap_config s2mps15_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = S2MPS15_REG_LDODSCH4,
+	.volatile_reg = s2mps11_volatile,
+	.cache_type = REGCACHE_FLAT,
+};
+
 static const struct regmap_config s2mpu02_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -384,6 +408,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 	case S2MPS14X:
 		regmap = &s2mps14_regmap_config;
 		break;
+	case S2MPS15X:
+		regmap = &s2mps15_regmap_config;
+		break;
 	case S5M8763X:
 		regmap = &s5m8763_regmap_config;
 		break;
@@ -442,6 +469,10 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 		sec_devs = s2mps14_devs;
 		num_sec_devs = ARRAY_SIZE(s2mps14_devs);
 		break;
+	case S2MPS15X:
+		sec_devs = s2mps15_devs;
+		num_sec_devs = ARRAY_SIZE(s2mps15_devs);
+		break;
 	case S2MPU02:
 		sec_devs = s2mpu02_devs;
 		num_sec_devs = ARRAY_SIZE(s2mpu02_devs);
@@ -505,7 +536,7 @@ static void sec_pmic_shutdown(struct i2c_client *i2c)
 #ifdef CONFIG_PM_SLEEP
 static int sec_pmic_suspend(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))
@@ -526,7 +557,7 @@ static int sec_pmic_suspend(struct device *dev)
 
 static int sec_pmic_resume(struct device *dev)
 {
-	struct i2c_client *i2c = container_of(dev, struct i2c_client, dev);
+	struct i2c_client *i2c = to_i2c_client(dev);
 	struct sec_pmic_dev *sec_pmic = i2c_get_clientdata(i2c);
 
 	if (device_may_wakeup(dev))

drivers/mfd/sec-irq.c

@@ -407,6 +407,11 @@ static const struct regmap_irq_chip s2mps14_irq_chip = {
 	S2MPS1X_IRQ_CHIP_COMMON_DATA,
 };
 
+static const struct regmap_irq_chip s2mps15_irq_chip = {
+	.name = "s2mps15",
+	S2MPS1X_IRQ_CHIP_COMMON_DATA,
+};
+
 static const struct regmap_irq_chip s2mpu02_irq_chip = {
 	.name = "s2mpu02",
 	.irqs = s2mpu02_irqs,
@@ -466,6 +471,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 	case S2MPS14X:
 		sec_irq_chip = &s2mps14_irq_chip;
 		break;
+	case S2MPS15X:
+		sec_irq_chip = &s2mps15_irq_chip;
+		break;
 	case S2MPU02:
 		sec_irq_chip = &s2mpu02_irq_chip;
 		break;

drivers/mfd/sta2x11-mfd.c

@@ -372,12 +372,6 @@ static struct platform_driver sta2x11_sctl_platform_driver = {
 	.probe		= sta2x11_sctl_probe,
 };
 
-static int __init sta2x11_sctl_init(void)
-{
-	pr_info("%s\n", __func__);
-	return platform_driver_register(&sta2x11_sctl_platform_driver);
-}
-
 static struct platform_driver sta2x11_platform_driver = {
 	.driver = {
 		.name	= STA2X11_MFD_APBREG_NAME,
@@ -385,12 +379,6 @@ static struct platform_driver sta2x11_platform_driver = {
 	.probe		= sta2x11_apbreg_probe,
 };
 
-static int __init sta2x11_apbreg_init(void)
-{
-	pr_info("%s\n", __func__);
-	return platform_driver_register(&sta2x11_platform_driver);
-}
-
 static struct platform_driver sta2x11_apb_soc_regs_platform_driver = {
 	.driver = {
 		.name	= STA2X11_MFD_APB_SOC_REGS_NAME,
@@ -398,12 +386,6 @@ static struct platform_driver sta2x11_apb_soc_regs_platform_driver = {
 	.probe		= sta2x11_apb_soc_regs_probe,
 };
 
-static int __init sta2x11_apb_soc_regs_init(void)
-{
-	pr_info("%s\n", __func__);
-	return platform_driver_register(&sta2x11_apb_soc_regs_platform_driver);
-}
-
 static struct platform_driver sta2x11_scr_platform_driver = {
 	.driver = {
 		.name = STA2X11_MFD_SCR_NAME,
@@ -411,13 +393,18 @@ static struct platform_driver sta2x11_scr_platform_driver = {
 	.probe = sta2x11_scr_probe,
 };
 
-static int __init sta2x11_scr_init(void)
+static struct platform_driver * const drivers[] = {
+	&sta2x11_platform_driver,
+	&sta2x11_sctl_platform_driver,
+	&sta2x11_apb_soc_regs_platform_driver,
+	&sta2x11_scr_platform_driver,
+};
+
+static int __init sta2x11_drivers_init(void)
 {
-	pr_info("%s\n", __func__);
-	return platform_driver_register(&sta2x11_scr_platform_driver);
+	return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
 }
 
-
 /*
  * What follows are the PCI devices that host the above pdevs.
  * Each logic block is 4kB and they are all consecutive: we use this info.
@@ -664,10 +651,7 @@ static int __init sta2x11_mfd_init(void)
  * prepares platform drivers very early and probe the PCI device later,
  * but before other PCI devices.
  */
-subsys_initcall(sta2x11_apbreg_init);
-subsys_initcall(sta2x11_sctl_init);
-subsys_initcall(sta2x11_apb_soc_regs_init);
-subsys_initcall(sta2x11_scr_init);
+subsys_initcall(sta2x11_drivers_init);
 rootfs_initcall(sta2x11_mfd_init);
 
 MODULE_LICENSE("GPL v2");

drivers/mfd/syscon.c

@@ -47,6 +47,7 @@ static struct syscon *of_syscon_register(struct device_node *np)
 	struct syscon *syscon;
 	struct regmap *regmap;
 	void __iomem *base;
+	u32 reg_io_width;
 	int ret;
 	struct regmap_config syscon_config = syscon_regmap_config;
 
@@ -69,6 +70,18 @@ static struct syscon *of_syscon_register(struct device_node *np)
 	 else if (of_property_read_bool(np, "little-endian"))
 		syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE;
 
+	/*
+	 * search for reg-io-width property in DT. If it is not provided,
+	 * default to 4 bytes. regmap_init_mmio will return an error if values
+	 * are invalid so there is no need to check them here.
+	 */
+	ret = of_property_read_u32(np, "reg-io-width", &reg_io_width);
+	if (ret)
+		reg_io_width = 4;
+
+	syscon_config.reg_stride = reg_io_width;
+	syscon_config.val_bits = reg_io_width * 8;
+
 	regmap = regmap_init_mmio(NULL, base, &syscon_config);
 	if (IS_ERR(regmap)) {
 		pr_err("regmap init failed\n");

drivers/mfd/tc6393xb.c

@@ -437,8 +437,8 @@ static int tc6393xb_gpio_get(struct gpio_chip *chip,
 	struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio);
 
 	/* XXX: does dsr also represent inputs? */
-	return tmio_ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8))
-		& TC_GPIO_BIT(offset);
+	return !!(tmio_ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8))
+		  & TC_GPIO_BIT(offset));
 }
 
 static void __tc6393xb_gpio_set(struct gpio_chip *chip,

drivers/mfd/tps65010.c

@@ -499,11 +499,11 @@ static int tps65010_gpio_get(struct gpio_chip *chip, unsigned offset)
 	if (offset < 4) {
 		value = i2c_smbus_read_byte_data(tps->client, TPS_DEFGPIO);
 		if (value < 0)
-			return 0;
+			return value;
 		if (value & (1 << (offset + 4)))	/* output */
 			return !(value & (1 << offset));
 		else					/* input */
-			return (value & (1 << offset));
+			return !!(value & (1 << offset));
 	}
 
 	/* REVISIT we *could* report LED1/nPG and LED2 state ... */

drivers/mfd/ucb1x00-core.c

@@ -133,7 +133,7 @@ static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
 	val = ucb1x00_reg_read(ucb, UCB_IO_DATA);
 	ucb1x00_disable(ucb);
 
-	return val & (1 << offset);
+	return !!(val & (1 << offset));
 }
 
 static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)

drivers/mfd/wm5110-tables.c

@@ -762,9 +762,9 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000200, 0x0006 },    /* R512   - Mic Charge Pump 1 */
 	{ 0x00000210, 0x0184 },    /* R528   - LDO1 Control 1 */
 	{ 0x00000213, 0x03E4 },    /* R531   - LDO2 Control 1 */
-	{ 0x00000218, 0x01A6 },    /* R536   - Mic Bias Ctrl 1 */
-	{ 0x00000219, 0x01A6 },    /* R537   - Mic Bias Ctrl 2 */
-	{ 0x0000021A, 0x01A6 },    /* R538   - Mic Bias Ctrl 3 */
+	{ 0x00000218, 0x00E6 },    /* R536   - Mic Bias Ctrl 1 */
+	{ 0x00000219, 0x00E6 },    /* R537   - Mic Bias Ctrl 2 */
+	{ 0x0000021A, 0x00E6 },    /* R538   - Mic Bias Ctrl 3 */
 	{ 0x00000293, 0x0000 },    /* R659   - Accessory Detect Mode 1 */
 	{ 0x0000029B, 0x0028 },    /* R667   - Headphone Detect 1 */
 	{ 0x000002A2, 0x0000 },    /* R674   - Micd clamp control */

drivers/mfd/wm831x-otp.c

@@ -47,20 +47,14 @@ static ssize_t wm831x_unique_id_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
 	struct wm831x *wm831x = dev_get_drvdata(dev);
-	int i, rval;
+	int rval;
 	char id[WM831X_UNIQUE_ID_LEN];
-	ssize_t ret = 0;
 
 	rval = wm831x_unique_id_read(wm831x, id);
 	if (rval < 0)
 		return 0;
 
-	for (i = 0; i < WM831X_UNIQUE_ID_LEN; i++)
-		ret += sprintf(&buf[ret], "%02x", buf[i]);
-
-	ret += sprintf(&buf[ret], "\n");
-
-	return ret;
+	return sprintf(buf, "%*phN\n", WM831X_UNIQUE_ID_LEN, id);
 }
 
 static DEVICE_ATTR(unique_id, 0444, wm831x_unique_id_show, NULL);

drivers/regulator/Kconfig

@@ -588,10 +588,10 @@ config REGULATOR_S2MPA01
 	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
 
 config REGULATOR_S2MPS11
-	tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
+	tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
 	depends on MFD_SEC_CORE
 	help
-	 This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
+	 This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
 	 output regulator via I2C bus. The chip is comprised of high efficient
 	 Buck converters including Dual-Phase Buck converter, Buck-Boost
 	 converter, various LDOs.

include/linux/mfd/arizona/core.h

@@ -27,6 +27,8 @@ enum arizona_type {
 	WM8280 = 4,
 	WM8998 = 5,
 	WM1814 = 6,
+	WM1831 = 7,
+	CS47L24 = 8,
 };
 
 #define ARIZONA_IRQ_GP1                    0
@@ -166,6 +168,7 @@ static inline int wm5102_patch(struct arizona *arizona)
 #endif
 
 int wm5110_patch(struct arizona *arizona);
+int cs47l24_patch(struct arizona *arizona);
 int wm8997_patch(struct arizona *arizona);
 int wm8998_patch(struct arizona *arizona);
 

include/linux/mfd/arizona/pdata.h

@@ -171,7 +171,7 @@ struct arizona_pdata {
 	int inmode[ARIZONA_MAX_INPUT];
 
 	/** Mode for outputs */
-	bool out_mono[ARIZONA_MAX_OUTPUT];
+	int out_mono[ARIZONA_MAX_OUTPUT];
 
 	/** PDM speaker mute setting */
 	unsigned int spk_mute[ARIZONA_MAX_PDM_SPK];

include/linux/mfd/samsung/core.h

@@ -44,6 +44,7 @@ enum sec_device_type {
 	S2MPS11X,
 	S2MPS13X,
 	S2MPS14X,
+	S2MPS15X,
 	S2MPU02,
 };