Commit cff3784d authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Mauro Carvalho Chehab

media: ti-vpe: cal: Decouple CSI2 port and CPORT

The CPORT mentioned in the CAL documentation has nothing to do with the
CSI-2 ports. It's a remnant of CSI-3 support (or an attempt to achieve
it), and now only serves as an arbitraty tag value used to associate
data samples with contexts. Add a cport field to the cal_ctx structure
and use it instead of the CSI-2 port number where a CPORT is required by
the hardware. The value of the cport field is currently the same as the
csi2_port field, so there's no functional change, but this will help
reworking CPORT and CSI-2 port handling separately.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: default avatarBenoit Parrot <bparrot@ti.com>
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+huawei@kernel.org>
parent 78902626
......@@ -409,6 +409,7 @@ struct cal_ctx {
struct vb2_queue vb_vidq;
unsigned int seq_count;
unsigned int csi2_port;
unsigned int cport;
unsigned int virtual_channel;
/* Pointer pointing to current v4l2_buffer */
......@@ -971,7 +972,7 @@ static void csi2_ctx_config(struct cal_ctx *ctx)
u32 val;
val = reg_read(ctx->dev, CAL_CSI2_CTX0(ctx->csi2_port));
set_field(&val, ctx->csi2_port, CAL_CSI2_CTX_CPORT_MASK);
set_field(&val, ctx->cport, CAL_CSI2_CTX_CPORT_MASK);
/*
* DT type: MIPI CSI-2 Specs
* 0x1: All - DT filter is disabled
......@@ -1036,7 +1037,7 @@ static void pix_proc_config(struct cal_ctx *ctx)
set_field(&val, CAL_PIX_PROC_DPCMD_BYPASS, CAL_PIX_PROC_DPCMD_MASK);
set_field(&val, CAL_PIX_PROC_DPCME_BYPASS, CAL_PIX_PROC_DPCME_MASK);
set_field(&val, pack, CAL_PIX_PROC_PACK_MASK);
set_field(&val, ctx->csi2_port, CAL_PIX_PROC_CPORT_MASK);
set_field(&val, ctx->cport, CAL_PIX_PROC_CPORT_MASK);
set_field(&val, 1, CAL_PIX_PROC_EN_MASK);
reg_write(ctx->dev, CAL_PIX_PROC(ctx->csi2_port), val);
ctx_dbg(3, ctx, "CAL_PIX_PROC(%d) = 0x%08x\n", ctx->csi2_port,
......@@ -1049,7 +1050,7 @@ static void cal_wr_dma_config(struct cal_ctx *ctx,
u32 val;
val = reg_read(ctx->dev, CAL_WR_DMA_CTRL(ctx->csi2_port));
set_field(&val, ctx->csi2_port, CAL_WR_DMA_CTRL_CPORT_MASK);
set_field(&val, ctx->cport, CAL_WR_DMA_CTRL_CPORT_MASK);
set_field(&val, height, CAL_WR_DMA_CTRL_YSIZE_MASK);
set_field(&val, CAL_WR_DMA_CTRL_DTAG_PIX_DAT,
CAL_WR_DMA_CTRL_DTAG_MASK);
......@@ -2221,6 +2222,7 @@ static struct cal_ctx *cal_create_instance(struct cal_dev *dev, int inst)
/* Store the instance id */
ctx->csi2_port = inst + 1;
ctx->cport = inst + 1;
ret = of_cal_create_instance(ctx, inst);
if (ret) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment