arm64: dts: marvell: Add 7k/8k per-port PHYs in SATA nodes

Fill-in the missing SATA phys/phy-names DT properties of Armada 7k/8k
based boards.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

arch/arm64/boot/dts/marvell/armada-7040-db.dts

@@ -219,6 +219,11 @@ partition@400000 {
 
 &cp0_sata0 {
 	status = "okay";
+
+	sata-port@1 {
+		phys = <&cp0_comphy3 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
 };
 
 &cp0_usb3_0 {

arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts

@@ -348,6 +348,11 @@ cp1_wps_button_pins: wps-button-pins {
 &cp1_sata0 {
 	pinctrl-0 = <&cp0_pci1_reset_pins>;
 	status = "okay";
+
+	sata-port@1 {
+		phys = <&cp1_comphy0 1>;
+		phy-names = "cp1-sata0-1-phy";
+	};
 };
 
 &cp1_mdio {

arch/arm64/boot/dts/marvell/armada-8040-db.dts

@@ -143,6 +143,15 @@ expander1: pca9555@25 {
 /* CON4 on CP0 expansion */
 &cp0_sata0 {
 	status = "okay";
+
+	sata-port@0 {
+		phys = <&cp0_comphy1 0>;
+		phy-names = "cp0-sata0-0-phy";
+	};
+	sata-port@1 {
+		phys = <&cp0_comphy3 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
 };
 
 /* CON9 on CP0 expansion */
@@ -273,6 +282,15 @@ partition@1000000 {
 /* CON4 on CP1 expansion */
 &cp1_sata0 {
 	status = "okay";
+
+	sata-port@0 {
+		phys = <&cp1_comphy1 0>;
+		phy-names = "cp1-sata0-0-phy";
+	};
+	sata-port@1 {
+		phys = <&cp1_comphy3 1>;
+		phy-names = "cp1-sata0-1-phy";
+	};
 };
 
 /* CON9 on CP1 expansion */

arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi

@@ -239,8 +239,13 @@ &cp0_eth0 {
 };
 
 &cp0_sata0 {
-	/* CPM Lane 0 - U29 */
 	status = "okay";
+
+	/* CPM Lane 5 - U29 */
+	sata-port@1 {
+		phys = <&cp0_comphy5 1>;
+		phy-names = "cp0-sata0-1-phy";
+	};
 };
 
 &cp0_sdhci0 {
@@ -324,9 +329,19 @@ &cp1_uart0 {
 };
 
 &cp1_sata0 {
+	status = "okay";
+
 	/* CPS Lane 1 - U32 */
+	sata-port@0 {
+		phys = <&cp1_comphy1 0>;
+		phy-names = "cp1-sata0-0-phy";
+	};
+
 	/* CPS Lane 3 - U31 */
-	status = "okay";
+	sata-port@1 {
+		phys = <&cp1_comphy3 1>;
+		phy-names = "cp1-sata0-1-phy";
+	};
 };
 
 &cp1_spi1 {

arch/arm64/boot/dts/marvell/armada-cp110.dtsi

@@ -309,7 +309,17 @@ CP110_LABEL(sata0): sata@540000 {
 			interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&CP110_LABEL(clk) 1 15>,
 				 <&CP110_LABEL(clk) 1 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
+
+			sata-port@0 {
+				reg = <0>;
+			};
+
+			sata-port@1 {
+				reg = <1>;
+			};
 		};
 
 		CP110_LABEL(xor0): xor@6a0000 {