Merge branches 'clk-mvebu-spdx', 'clk-meson', 'clk-imx7d-mu',...

Merge branches 'clk-mvebu-spdx', 'clk-meson', 'clk-imx7d-mu', 'clk-imx-init-array-cleanup' and 'clk-rockchip' into clk-next * clk-mvebu-spdx: clk: mvebu: armada-37xx-periph: switch to SPDX license identifier * clk-meson: clk: meson: add gen_clk clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definition clk: meson-axg: add clocks required by pcie driver clk: meson: remove unused clk-audio-divider driver clk: meson: stop rate propagation for audio clocks clk: meson: axg: add the audio clock controller driver clk: meson: add axg audio sclk divider driver clk: meson: add triple phase clock driver clk: meson: add clk-phase clock driver clk: meson: clean-up meson clock configuration clk: meson: remove obsolete register access clk: meson: expose GEN_CLK clkid clk: meson-axg: add pcie and mipi clock bindings dt-bindings: clock: add meson axg audio clock controller bindings clk: meson: audio-divider is one based clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL * clk-imx7d-mu: : - i.MX7D mailbox clk support clk: imx7d: add IMX7D_MU_ROOT_CLK * clk-imx-init-array-cleanup: : - i.MX clk init arrays removed in place of CLK_IS_CRITICAL clk: imx6sx: remove clks_init_on array clk: imx6sl: remove clks_init_on array clk: imx6q: remove clks_init_on array * clk-rockchip: clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 clk: rockchip: fix clk_i2sout parent selection bits on rk3399 clk: rockchip: add clock controller for px30 clk: rockchip: add support for half divider dt-bindings: add bindings for px30 clock controller clk: rockchip: add dt-binding header for px30

Merge branches 'clk-mvebu-spdx', 'clk-meson', 'clk-imx7d-mu',...
Merge branches 'clk-mvebu-spdx', 'clk-meson', 'clk-imx7d-mu', 'clk-imx-init-array-cleanup' and 'clk-rockchip' into clk-next * clk-mvebu-spdx: clk: mvebu: armada-37xx-periph: switch to SPDX license identifier * clk-meson: clk: meson: add gen_clk clk: meson: gxbb: remove HHI_GEN_CLK_CTNL duplicate definition clk: meson-axg: add clocks required by pcie driver clk: meson: remove unused clk-audio-divider driver clk: meson: stop rate propagation for audio clocks clk: meson: axg: add the audio clock controller driver clk: meson: add axg audio sclk divider driver clk: meson: add triple phase clock driver clk: meson: add clk-phase clock driver clk: meson: clean-up meson clock configuration clk: meson: remove obsolete register access clk: meson: expose GEN_CLK clkid clk: meson-axg: add pcie and mipi clock bindings dt-bindings: clock: add meson axg audio clock controller bindings clk: meson: audio-divider is one based clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL * clk-imx7d-mu: : - i.MX7D mailbox clk support clk: imx7d: add IMX7D_MU_ROOT_CLK * clk-imx-init-array-cleanup: : - i.MX clk init arrays removed in place of CLK_IS_CRITICAL clk: imx6sx: remove clks_init_on array clk: imx6sl: remove clks_init_on array clk: imx6q: remove clks_init_on array * clk-rockchip: clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399 clk: rockchip: fix clk_i2sout parent selection bits on rk3399 clk: rockchip: add clock controller for px30 clk: rockchip: add support for half divider dt-bindings: add bindings for px30 clock controller clk: rockchip: add dt-binding header for px30
d16adaf0 · Stephen Boyd · 13905463 · 66c7bb7c · 166f3a8a · 30343897
Commit d16adaf0 authored Aug 14, 2018 by Stephen Boyd
31 changed files
--- a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt
+* Amlogic AXG Audio Clock Controllers
+
+The Amlogic AXG audio clock controller generates and supplies clock to the
+other elements of the audio subsystem, such as fifos, i2s, spdif and pdm
+devices.
+
+Required Properties:
+
+- compatible	: should be "amlogic,axg-audio-clkc" for the A113X and A113D
+- reg		: physical base address of the clock controller and length of
+		  memory mapped region.
+- clocks	: a list of phandle + clock-specifier pairs for the clocks listed
+		  in clock-names.
+- clock-names	: must contain the following:
+		  * "pclk" - Main peripheral bus clock
+		  may contain the following:
+		  * "mst_in[0-7]" - 8 input plls to generate clock signals
+		  * "slv_sclk[0-9]" - 10 slave bit clocks provided by external
+				      components.
+		  * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external
+				       components.
+- resets	: phandle of the internal reset line
+- #clock-cells	: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be
+used in device tree sources.
+
+Example:
+
+clkc_audio: clock-controller@0 {
+	compatible = "amlogic,axg-audio-clkc";
+	reg = <0x0 0x0 0x0 0xb4>;
+	#clock-cells = <1>;
+
+	clocks = <&clkc CLKID_AUDIO>,
+		 <&clkc CLKID_MPLL0>,
+		 <&clkc CLKID_MPLL1>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL3>,
+		 <&clkc CLKID_HIFI_PLL>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_GP0_PLL>;
+	clock-names = "pclk",
+		      "mst_in0",
+		      "mst_in1",
+		      "mst_in2",
+		      "mst_in3",
+		      "mst_in4",
+		      "mst_in5",
+		      "mst_in6",
+		      "mst_in7";
+	resets = <&reset RESET_AUDIO>;
+};
--- a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
+++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
+* Rockchip PX30 Clock and Reset Unit
+
+The PX30 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
+- compatible: CRU should be "rockchip,px30-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing, pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "i2sx_clkin" - external I2S clock - optional,
+ - "gmac_clkin" - external GMAC clock - optional
+
+Example: Clock controller node:
+
+	pmucru: clock-controller@ff2bc000 {
+		compatible = "rockchip,px30-pmucru";
+		reg = <0x0 0xff2bc000 0x0 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	cru: clock-controller@ff2b0000 {
+		compatible = "rockchip,px30-cru";
+		reg = <0x0 0xff2b0000 0x0 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@ff030000 {
+		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+		reg = <0x0 0xff030000 0x0 0x100>;
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
+		clock-names = "baudclk", "apb_pclk";
+		reg-shift = <2>;
+		reg-io-width = <4>;
+	};
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -96,12 +96,6 @@ static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
 static struct clk *clk[IMX6QDL_CLK_END];
 static struct clk_onecell_data clk_data;

-static unsigned int const clks_init_on[] __initconst = {
-	IMX6QDL_CLK_MMDC_CH0_AXI,
-	IMX6QDL_CLK_ROM,
-	IMX6QDL_CLK_ARM,
-};
-
 static struct clk_div_table clk_enet_ref_table[] = {
 	{ .val = 0, .div = 20, },
 	{ .val = 1, .div = 10, },
@@ -417,7 +411,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
 	void __iomem *anatop_base, *base;
-	int i;
 	int ret;

 	clk[IMX6QDL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
@@ -794,7 +787,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb",            "mlb_podf",   base + 0x74, 18);
 	else
 		clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb",            "axi",               base + 0x74, 18);
-	clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2("mmdc_ch0_axi",  "mmdc_ch0_axi_podf", base + 0x74, 20);
+	clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2_flags("mmdc_ch0_axi",  "mmdc_ch0_axi_podf", base + 0x74, 20, CLK_IS_CRITICAL);
 	clk[IMX6QDL_CLK_MMDC_CH1_AXI] = imx_clk_gate2("mmdc_ch1_axi",  "mmdc_ch1_axi_podf", base + 0x74, 22);
 	clk[IMX6QDL_CLK_OCRAM]        = imx_clk_gate2("ocram",         "ahb",               base + 0x74, 28);
 	clk[IMX6QDL_CLK_OPENVG_AXI]   = imx_clk_gate2("openvg_axi",    "axi",               base + 0x74, 30);
@@ -808,7 +801,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_GPMI_BCH]     = imx_clk_gate2("gpmi_bch",      "usdhc4",            base + 0x78, 26);
 	clk[IMX6QDL_CLK_GPMI_IO]      = imx_clk_gate2("gpmi_io",       "enfc",              base + 0x78, 28);
 	clk[IMX6QDL_CLK_GPMI_APB]     = imx_clk_gate2("gpmi_apb",      "usdhc3",            base + 0x78, 30);
-	clk[IMX6QDL_CLK_ROM]          = imx_clk_gate2("rom",           "ahb",               base + 0x7c, 0);
+	clk[IMX6QDL_CLK_ROM]          = imx_clk_gate2_flags("rom",     "ahb",               base + 0x7c, 0, CLK_IS_CRITICAL);
 	clk[IMX6QDL_CLK_SATA]         = imx_clk_gate2("sata",          "ahb",               base + 0x7c, 4);
 	clk[IMX6QDL_CLK_SDMA]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clk[IMX6QDL_CLK_SPBA]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
@@ -878,9 +871,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	 */
 	clk_set_parent(clk[IMX6QDL_CLK_ENFC_SEL], clk[IMX6QDL_CLK_PLL2_PFD2_396M]);

-	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
-		clk_prepare_enable(clk[clks_init_on[i]]);
-
 	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
 		clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY1_GATE]);
 		clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY2_GATE]);

--- a/drivers/clk/imx/clk-imx6sl.c
+++ b/drivers/clk/imx/clk-imx6sl.c
@@ -104,10 +104,6 @@ static struct clk_onecell_data clk_data;
 static void __iomem *ccm_base;
 static void __iomem *anatop_base;

-static const u32 clks_init_on[] __initconst = {
-	IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT,
-};
-
 /*
 * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
 *           during WAIT mode entry process could cause cache memory
@@ -195,7 +191,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
 	void __iomem *base;
-	int i;
 	int ret;

 	clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0);
@@ -426,13 +421,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 		pr_warn("%s: failed to set AHB clock rate %d!\n",
 			__func__, ret);

-	/*
-	 * Make sure those always on clocks are enabled to maintain the correct
-	 * usecount and enabling/disabling of parent PLLs.
-	 */
-	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
-		clk_prepare_enable(clks[clks_init_on[i]]);
-
 	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
 		clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]);
 		clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]);

--- a/drivers/clk/imx/clk-imx6sx.c
+++ b/drivers/clk/imx/clk-imx6sx.c
@@ -92,14 +92,6 @@ static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
 static struct clk *clks[IMX6SX_CLK_CLK_END];
 static struct clk_onecell_data clk_data;

-static int const clks_init_on[] __initconst = {
-	IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3,
-	IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3,
-	IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG,
-	IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM,
-	IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_TZASC1,
-};
-
 static const struct clk_div_table clk_enet_ref_table[] = {
 	{ .val = 0, .div = 20, },
 	{ .val = 1, .div = 10, },
@@ -142,7 +134,6 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 {
 	struct device_node *np;
 	void __iomem *base;
-	int i;

 	clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0);

@@ -332,7 +323,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SX_CLK_QSPI1_PODF]         = imx_clk_divider("qspi1_podf",     "qspi1_sel",         base + 0x1c, 26,   3);
 	clks[IMX6SX_CLK_EIM_SLOW_PODF]      = imx_clk_divider("eim_slow_podf",  "eim_slow_sel",      base + 0x1c, 23,   3);
 	clks[IMX6SX_CLK_LCDIF2_PODF]        = imx_clk_divider("lcdif2_podf",    "lcdif2_pred",       base + 0x1c, 20,   3);
-	clks[IMX6SX_CLK_PERCLK]             = imx_clk_divider("perclk",         "perclk_sel",        base + 0x1c, 0,    6);
+	clks[IMX6SX_CLK_PERCLK]             = imx_clk_divider_flags("perclk", "perclk_sel", base + 0x1c, 0, 6, CLK_IS_CRITICAL);
 	clks[IMX6SX_CLK_VID_PODF]           = imx_clk_divider("vid_podf",       "vid_sel",           base + 0x20, 24,   2);
 	clks[IMX6SX_CLK_CAN_PODF]           = imx_clk_divider("can_podf",       "can_sel",           base + 0x20, 2,    6);
 	clks[IMX6SX_CLK_USDHC4_PODF]        = imx_clk_divider("usdhc4_podf",    "usdhc4_sel",        base + 0x24, 22,   3);
@@ -380,8 +371,8 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)

 	/*                                            name             parent_name          reg         shift */
 	/* CCGR0 */
-	clks[IMX6SX_CLK_AIPS_TZ1]     = imx_clk_gate2("aips_tz1",      "ahb",               base + 0x68, 0);
-	clks[IMX6SX_CLK_AIPS_TZ2]     = imx_clk_gate2("aips_tz2",      "ahb",               base + 0x68, 2);
+	clks[IMX6SX_CLK_AIPS_TZ1]     = imx_clk_gate2_flags("aips_tz1", "ahb", base + 0x68, 0, CLK_IS_CRITICAL);
+	clks[IMX6SX_CLK_AIPS_TZ2]     = imx_clk_gate2_flags("aips_tz2", "ahb", base + 0x68, 2, CLK_IS_CRITICAL);
 	clks[IMX6SX_CLK_APBH_DMA]     = imx_clk_gate2("apbh_dma",      "usdhc3",            base + 0x68, 4);
 	clks[IMX6SX_CLK_ASRC_MEM]     = imx_clk_gate2_shared("asrc_mem", "ahb",             base + 0x68, 6, &share_count_asrc);
 	clks[IMX6SX_CLK_ASRC_IPG]     = imx_clk_gate2_shared("asrc_ipg", "ahb",             base + 0x68, 6, &share_count_asrc);
@@ -394,7 +385,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SX_CLK_CAN2_SERIAL]  = imx_clk_gate2("can2_serial",   "can_podf",          base + 0x68, 20);
 	clks[IMX6SX_CLK_DCIC1]        = imx_clk_gate2("dcic1",         "display_podf",      base + 0x68, 24);
 	clks[IMX6SX_CLK_DCIC2]        = imx_clk_gate2("dcic2",         "display_podf",      base + 0x68, 26);
-	clks[IMX6SX_CLK_AIPS_TZ3]     = imx_clk_gate2("aips_tz3",      "ahb",               base + 0x68, 30);
+	clks[IMX6SX_CLK_AIPS_TZ3]     = imx_clk_gate2_flags("aips_tz3", "ahb", base + 0x68, 30, CLK_IS_CRITICAL);

 	/* CCGR1 */
 	clks[IMX6SX_CLK_ECSPI1]       = imx_clk_gate2("ecspi1",        "ecspi_podf",        base + 0x6c, 0);
@@ -407,7 +398,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SX_CLK_ESAI_EXTAL]   = imx_clk_gate2_shared("esai_extal", "esai_podf",     base + 0x6c, 16, &share_count_esai);
 	clks[IMX6SX_CLK_ESAI_IPG]     = imx_clk_gate2_shared("esai_ipg",   "ahb",           base + 0x6c, 16, &share_count_esai);
 	clks[IMX6SX_CLK_ESAI_MEM]     = imx_clk_gate2_shared("esai_mem",   "ahb",           base + 0x6c, 16, &share_count_esai);
-	clks[IMX6SX_CLK_WAKEUP]       = imx_clk_gate2("wakeup",        "ipg",               base + 0x6c, 18);
+	clks[IMX6SX_CLK_WAKEUP]       = imx_clk_gate2_flags("wakeup", "ipg", base + 0x6c, 18, CLK_IS_CRITICAL);
 	clks[IMX6SX_CLK_GPT_BUS]      = imx_clk_gate2("gpt_bus",       "perclk",            base + 0x6c, 20);
 	clks[IMX6SX_CLK_GPT_SERIAL]   = imx_clk_gate2("gpt_serial",    "perclk",            base + 0x6c, 22);
 	clks[IMX6SX_CLK_GPU]          = imx_clk_gate2("gpu",           "gpu_core_podf",     base + 0x6c, 26);
@@ -420,10 +411,10 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SX_CLK_I2C3]         = imx_clk_gate2("i2c3",          "perclk",            base + 0x70, 10);
 	clks[IMX6SX_CLK_OCOTP]        = imx_clk_gate2("ocotp",         "ipg",               base + 0x70, 12);
 	clks[IMX6SX_CLK_IOMUXC]       = imx_clk_gate2("iomuxc",        "lcdif1_podf",       base + 0x70, 14);
-	clks[IMX6SX_CLK_IPMUX1]       = imx_clk_gate2("ipmux1",        "ahb",               base + 0x70, 16);
-	clks[IMX6SX_CLK_IPMUX2]       = imx_clk_gate2("ipmux2",        "ahb",               base + 0x70, 18);
-	clks[IMX6SX_CLK_IPMUX3]       = imx_clk_gate2("ipmux3",        "ahb",               base + 0x70, 20);
-	clks[IMX6SX_CLK_TZASC1]       = imx_clk_gate2("tzasc1",        "mmdc_podf",         base + 0x70, 22);
+	clks[IMX6SX_CLK_IPMUX1]       = imx_clk_gate2_flags("ipmux1", "ahb", base + 0x70, 16, CLK_IS_CRITICAL);
+	clks[IMX6SX_CLK_IPMUX2]       = imx_clk_gate2_flags("ipmux2", "ahb", base + 0x70, 18, CLK_IS_CRITICAL);
+	clks[IMX6SX_CLK_IPMUX3]       = imx_clk_gate2_flags("ipmux3", "ahb", base + 0x70, 20, CLK_IS_CRITICAL);
+	clks[IMX6SX_CLK_TZASC1]       = imx_clk_gate2_flags("tzasc1", "mmdc_podf", base + 0x70, 22, CLK_IS_CRITICAL);
 	clks[IMX6SX_CLK_LCDIF_APB]    = imx_clk_gate2("lcdif_apb",     "display_podf",      base + 0x70, 28);
 	clks[IMX6SX_CLK_PXP_AXI]      = imx_clk_gate2("pxp_axi",       "display_podf",      base + 0x70, 30);

@@ -437,15 +428,15 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SX_CLK_LDB_DI0]      = imx_clk_gate2("ldb_di0",       "ldb_di0_div_sel",   base + 0x74, 12);
 	clks[IMX6SX_CLK_QSPI1]        = imx_clk_gate2("qspi1",         "qspi1_podf",        base + 0x74, 14);
 	clks[IMX6SX_CLK_MLB]          = imx_clk_gate2("mlb",           "ahb",               base + 0x74, 18);
-	clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast",  "mmdc_podf",         base + 0x74, 20);
-	clks[IMX6SX_CLK_MMDC_P0_IPG]  = imx_clk_gate2("mmdc_p0_ipg",   "ipg",               base + 0x74, 24);
-	clks[IMX6SX_CLK_OCRAM]        = imx_clk_gate2("ocram",         "ocram_podf",        base + 0x74, 28);
+	clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2_flags("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20, CLK_IS_CRITICAL);
+	clks[IMX6SX_CLK_MMDC_P0_IPG]  = imx_clk_gate2_flags("mmdc_p0_ipg", "ipg", base + 0x74, 24, CLK_IS_CRITICAL);
+	clks[IMX6SX_CLK_OCRAM]        = imx_clk_gate2_flags("ocram", "ocram_podf", base + 0x74, 28, CLK_IS_CRITICAL);

 	/* CCGR4 */
 	clks[IMX6SX_CLK_PCIE_AXI]     = imx_clk_gate2("pcie_axi",      "display_podf",      base + 0x78, 0);
 	clks[IMX6SX_CLK_QSPI2]        = imx_clk_gate2("qspi2",         "qspi2_podf",        base + 0x78, 10);
 	clks[IMX6SX_CLK_PER1_BCH]     = imx_clk_gate2("per1_bch",      "usdhc3",            base + 0x78, 12);
-	clks[IMX6SX_CLK_PER2_MAIN]    = imx_clk_gate2("per2_main",     "ahb",               base + 0x78, 14);
+	clks[IMX6SX_CLK_PER2_MAIN]    = imx_clk_gate2_flags("per2_main", "ahb", base + 0x78, 14, CLK_IS_CRITICAL);
 	clks[IMX6SX_CLK_PWM1]         = imx_clk_gate2("pwm1",          "perclk",            base + 0x78, 16);
 	clks[IMX6SX_CLK_PWM2]         = imx_clk_gate2("pwm2",          "perclk",            base + 0x78, 18);
 	clks[IMX6SX_CLK_PWM3]         = imx_clk_gate2("pwm3",          "perclk",            base + 0x78, 20);
@@ -456,7 +447,7 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clks[IMX6SX_CLK_GPMI_APB]     = imx_clk_gate2("gpmi_apb",      "usdhc3",            base + 0x78, 30);

 	/* CCGR5 */
-	clks[IMX6SX_CLK_ROM]          = imx_clk_gate2("rom",           "ahb",               base + 0x7c, 0);
+	clks[IMX6SX_CLK_ROM]          = imx_clk_gate2_flags("rom", "ahb", base + 0x7c, 0, CLK_IS_CRITICAL);
 	clks[IMX6SX_CLK_SDMA]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clks[IMX6SX_CLK_SPBA]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);
 	clks[IMX6SX_CLK_AUDIO]        = imx_clk_gate2_shared("audio",  "audio_podf",        base + 0x7c, 14, &share_count_audio);
@@ -502,9 +493,6 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node)
 	clk_data.clk_num = ARRAY_SIZE(clks);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);

-	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
-		clk_prepare_enable(clks[clks_init_on[i]]);
-
 	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
 		clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]);
 		clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]);

--- a/drivers/clk/imx/clk-imx7d.c
+++ b/drivers/clk/imx/clk-imx7d.c
@@ -797,6 +797,7 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node)
 	clks[IMX7D_DRAM_ALT_ROOT_CLK] = imx_clk_gate4("dram_alt_root_clk", "dram_alt_post_div", base + 0x4130, 0);
 	clks[IMX7D_OCOTP_CLK] = imx_clk_gate4("ocotp_clk", "ipg_root_clk", base + 0x4230, 0);
 	clks[IMX7D_SNVS_CLK] = imx_clk_gate4("snvs_clk", "ipg_root_clk", base + 0x4250, 0);
+	clks[IMX7D_MU_ROOT_CLK] = imx_clk_gate4("mu_root_clk", "ipg_root_clk", base + 0x4270, 0);
 	clks[IMX7D_CAAM_CLK] = imx_clk_gate4("caam_clk", "ipg_root_clk", base + 0x4240, 0);
 	clks[IMX7D_USB_HSIC_ROOT_CLK] = imx_clk_gate4("usb_hsic_root_clk", "usb_hsic_post_div", base + 0x4690, 0);
 	clks[IMX7D_SDMA_CORE_CLK] = imx_clk_gate4("sdma_root_clk", "ahb_root_clk", base + 0x4480, 0);

--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
 config COMMON_CLK_AMLOGIC
 	bool
-	depends on OF
 	depends on ARCH_MESON || COMPILE_TEST
+	select COMMON_CLK_REGMAP_MESON
+
+config COMMON_CLK_AMLOGIC_AUDIO
+	bool
+	depends on ARCH_MESON || COMPILE_TEST
+	select COMMON_CLK_AMLOGIC

 config COMMON_CLK_MESON_AO
 	bool
 	depends on OF
 	depends on ARCH_MESON || COMPILE_TEST
 	select COMMON_CLK_REGMAP_MESON
+	select RESET_CONTROLLER

 config COMMON_CLK_REGMAP_MESON
 	bool
@@ -15,9 +21,8 @@ config COMMON_CLK_REGMAP_MESON

 config COMMON_CLK_MESON8B
 	bool
-	depends on COMMON_CLK_AMLOGIC
+	select COMMON_CLK_AMLOGIC
 	select RESET_CONTROLLER
-	select COMMON_CLK_REGMAP_MESON
 	help
 	  Support for the clock controller on AmLogic S802 (Meson8),
 	  S805 (Meson8b) and S812 (Meson8m2) devices. Say Y if you
@@ -25,10 +30,8 @@ config COMMON_CLK_MESON8B

 config COMMON_CLK_GXBB
 	bool
-	depends on COMMON_CLK_AMLOGIC
-	select RESET_CONTROLLER
+	select COMMON_CLK_AMLOGIC
 	select COMMON_CLK_MESON_AO
-	select COMMON_CLK_REGMAP_MESON
 	select MFD_SYSCON
 	help
 	  Support for the clock controller on AmLogic S905 devices, aka gxbb.
@@ -36,11 +39,18 @@ config COMMON_CLK_GXBB

 config COMMON_CLK_AXG
 	bool
-	depends on COMMON_CLK_AMLOGIC
-	select RESET_CONTROLLER
+	select COMMON_CLK_AMLOGIC
 	select COMMON_CLK_MESON_AO
-	select COMMON_CLK_REGMAP_MESON
 	select MFD_SYSCON
 	help
 	  Support for the clock controller on AmLogic A113D devices, aka axg.
 	  Say Y if you want peripherals and CPU frequency scaling to work.
+
+config COMMON_CLK_AXG_AUDIO
+	tristate "Meson AXG Audio Clock Controller Driver"
+	depends on COMMON_CLK_AXG
+	select COMMON_CLK_AMLOGIC_AUDIO
+	select MFD_SYSCON
+	help
+	  Support for the audio clock controller on AmLogic A113D devices,
+	  aka axg, Say Y if you want audio subsystem to work.
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -2,9 +2,11 @@
 # Makefile for Meson specific clk
 #

-obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
+obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-phase.o
+obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO)	+= clk-triphase.o sclk-div.o
 obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
 obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o axg-aoclk.o
+obj-$(CONFIG_COMMON_CLK_AXG_AUDIO)	+= axg-audio.o
 obj-$(CONFIG_COMMON_CLK_REGMAP_MESON)	+= clk-regmap.o
--- a/drivers/clk/meson/axg-audio.c
+++ b/drivers/clk/meson/axg-audio.c
--- a/drivers/clk/meson/axg-audio.h
+++ b/drivers/clk/meson/axg-audio.h
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#ifndef __AXG_AUDIO_CLKC_H
+#define __AXG_AUDIO_CLKC_H
+
+/*
+ * Audio Clock  register offsets
+ *
+ * Register offsets from the datasheet must be multiplied by 4 before
+ * to get the right offset
+ */
+#define AUDIO_CLK_GATE_EN	0x000
+#define AUDIO_MCLK_A_CTRL	0x004
+#define AUDIO_MCLK_B_CTRL	0x008
+#define AUDIO_MCLK_C_CTRL	0x00C
+#define AUDIO_MCLK_D_CTRL	0x010
+#define AUDIO_MCLK_E_CTRL	0x014
+#define AUDIO_MCLK_F_CTRL	0x018
+#define AUDIO_MST_A_SCLK_CTRL0	0x040
+#define AUDIO_MST_A_SCLK_CTRL1	0x044
+#define AUDIO_MST_B_SCLK_CTRL0	0x048
+#define AUDIO_MST_B_SCLK_CTRL1	0x04C
+#define AUDIO_MST_C_SCLK_CTRL0	0x050
+#define AUDIO_MST_C_SCLK_CTRL1	0x054
+#define AUDIO_MST_D_SCLK_CTRL0	0x058
+#define AUDIO_MST_D_SCLK_CTRL1	0x05C
+#define AUDIO_MST_E_SCLK_CTRL0	0x060
+#define AUDIO_MST_E_SCLK_CTRL1	0x064
+#define AUDIO_MST_F_SCLK_CTRL0	0x068
+#define AUDIO_MST_F_SCLK_CTRL1	0x06C
+#define AUDIO_CLK_TDMIN_A_CTRL	0x080
+#define AUDIO_CLK_TDMIN_B_CTRL	0x084
+#define AUDIO_CLK_TDMIN_C_CTRL	0x088
+#define AUDIO_CLK_TDMIN_LB_CTRL 0x08C
+#define AUDIO_CLK_TDMOUT_A_CTRL 0x090
+#define AUDIO_CLK_TDMOUT_B_CTRL 0x094
+#define AUDIO_CLK_TDMOUT_C_CTRL 0x098
+#define AUDIO_CLK_SPDIFIN_CTRL	0x09C
+#define AUDIO_CLK_SPDIFOUT_CTRL 0x0A0
+#define AUDIO_CLK_RESAMPLE_CTRL 0x0A4
+#define AUDIO_CLK_LOCKER_CTRL	0x0A8
+#define AUDIO_CLK_PDMIN_CTRL0	0x0AC
+#define AUDIO_CLK_PDMIN_CTRL1	0x0B0
+
+/*
+ * CLKID index values
+ * These indices are entirely contrived and do not map onto the hardware.
+ */
+
+#define AUD_CLKID_PCLK			0
+#define AUD_CLKID_MST0			1
+#define AUD_CLKID_MST1			2
+#define AUD_CLKID_MST2			3
+#define AUD_CLKID_MST3			4
+#define AUD_CLKID_MST4			5
+#define AUD_CLKID_MST5			6
+#define AUD_CLKID_MST6			7
+#define AUD_CLKID_MST7			8
+#define AUD_CLKID_MST_A_MCLK_SEL	59
+#define AUD_CLKID_MST_B_MCLK_SEL	60
+#define AUD_CLKID_MST_C_MCLK_SEL	61
+#define AUD_CLKID_MST_D_MCLK_SEL	62
+#define AUD_CLKID_MST_E_MCLK_SEL	63
+#define AUD_CLKID_MST_F_MCLK_SEL	64
+#define AUD_CLKID_MST_A_MCLK_DIV	65
+#define AUD_CLKID_MST_B_MCLK_DIV	66
+#define AUD_CLKID_MST_C_MCLK_DIV	67
+#define AUD_CLKID_MST_D_MCLK_DIV	68
+#define AUD_CLKID_MST_E_MCLK_DIV	69
+#define AUD_CLKID_MST_F_MCLK_DIV	70
+#define AUD_CLKID_SPDIFOUT_CLK_SEL	71
+#define AUD_CLKID_SPDIFOUT_CLK_DIV	72
+#define AUD_CLKID_SPDIFIN_CLK_SEL	73
+#define AUD_CLKID_SPDIFIN_CLK_DIV	74
+#define AUD_CLKID_PDM_DCLK_SEL		75
+#define AUD_CLKID_PDM_DCLK_DIV		76
+#define AUD_CLKID_PDM_SYSCLK_SEL	77
+#define AUD_CLKID_PDM_SYSCLK_DIV	78
+#define AUD_CLKID_MST_A_SCLK_PRE_EN	92
+#define AUD_CLKID_MST_B_SCLK_PRE_EN	93
+#define AUD_CLKID_MST_C_SCLK_PRE_EN	94
+#define AUD_CLKID_MST_D_SCLK_PRE_EN	95
+#define AUD_CLKID_MST_E_SCLK_PRE_EN	96
+#define AUD_CLKID_MST_F_SCLK_PRE_EN	97
+#define AUD_CLKID_MST_A_SCLK_DIV	98
+#define AUD_CLKID_MST_B_SCLK_DIV	99
+#define AUD_CLKID_MST_C_SCLK_DIV	100
+#define AUD_CLKID_MST_D_SCLK_DIV	101
+#define AUD_CLKID_MST_E_SCLK_DIV	102
+#define AUD_CLKID_MST_F_SCLK_DIV	103
+#define AUD_CLKID_MST_A_SCLK_POST_EN	104
+#define AUD_CLKID_MST_B_SCLK_POST_EN	105
+#define AUD_CLKID_MST_C_SCLK_POST_EN	106
+#define AUD_CLKID_MST_D_SCLK_POST_EN	107
+#define AUD_CLKID_MST_E_SCLK_POST_EN	108
+#define AUD_CLKID_MST_F_SCLK_POST_EN	109
+#define AUD_CLKID_MST_A_LRCLK_DIV	110
+#define AUD_CLKID_MST_B_LRCLK_DIV	111
+#define AUD_CLKID_MST_C_LRCLK_DIV	112
+#define AUD_CLKID_MST_D_LRCLK_DIV	113
+#define AUD_CLKID_MST_E_LRCLK_DIV	114
+#define AUD_CLKID_MST_F_LRCLK_DIV	115
+#define AUD_CLKID_TDMIN_A_SCLK_PRE_EN	137
+#define AUD_CLKID_TDMIN_B_SCLK_PRE_EN	138
+#define AUD_CLKID_TDMIN_C_SCLK_PRE_EN	139
+#define AUD_CLKID_TDMIN_LB_SCLK_PRE_EN	140
+#define AUD_CLKID_TDMOUT_A_SCLK_PRE_EN	141
+#define AUD_CLKID_TDMOUT_B_SCLK_PRE_EN	142
+#define AUD_CLKID_TDMOUT_C_SCLK_PRE_EN	143
+#define AUD_CLKID_TDMIN_A_SCLK_POST_EN	144
+#define AUD_CLKID_TDMIN_B_SCLK_POST_EN	145
+#define AUD_CLKID_TDMIN_C_SCLK_POST_EN	146
+#define AUD_CLKID_TDMIN_LB_SCLK_POST_EN	147
+#define AUD_CLKID_TDMOUT_A_SCLK_POST_EN	148
+#define AUD_CLKID_TDMOUT_B_SCLK_POST_EN	149
+#define AUD_CLKID_TDMOUT_C_SCLK_POST_EN	150
+
+/* include the CLKIDs which are part of the DT bindings */
+#include <dt-bindings/clock/axg-audio-clkc.h>
+
+#define NR_CLKS	151
+
+#endif /*__AXG_AUDIO_CLKC_H */
--- a/drivers/clk/meson/axg.c
+++ b/drivers/clk/meson/axg.c
@@ -12,7 +12,6 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/init.h>
-#include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
@@ -626,6 +625,137 @@ static struct clk_regmap axg_mpll3 = {
 	},
 };

+static const struct pll_rate_table axg_pcie_pll_rate_table[] = {
+	{
+		.rate	= 100000000,
+		.m	= 200,
+		.n	= 3,
+		.od	= 1,
+		.od2	= 3,
+	},
+	{ /* sentinel */ },
+};
+
+static const struct reg_sequence axg_pcie_init_regs[] = {
+	{ .reg = HHI_PCIE_PLL_CNTL,	.def = 0x400106c8 },
+	{ .reg = HHI_PCIE_PLL_CNTL1,	.def = 0x0084a2aa },
+	{ .reg = HHI_PCIE_PLL_CNTL2,	.def = 0xb75020be },
+	{ .reg = HHI_PCIE_PLL_CNTL3,	.def = 0x0a47488e },
+	{ .reg = HHI_PCIE_PLL_CNTL4,	.def = 0xc000004d },
+	{ .reg = HHI_PCIE_PLL_CNTL5,	.def = 0x00078000 },
+	{ .reg = HHI_PCIE_PLL_CNTL6,	.def = 0x002323c6 },
+};
+
+static struct clk_regmap axg_pcie_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.m = {
+			.reg_off = HHI_PCIE_PLL_CNTL,
+			.shift   = 0,
+			.width   = 9,
+		},
+		.n = {
+			.reg_off = HHI_PCIE_PLL_CNTL,
+			.shift   = 9,
+			.width   = 5,
+		},
+		.od = {
+			.reg_off = HHI_PCIE_PLL_CNTL,
+			.shift   = 16,
+			.width   = 2,
+		},
+		.od2 = {
+			.reg_off = HHI_PCIE_PLL_CNTL6,
+			.shift   = 6,
+			.width   = 2,
+		},
+		.frac = {
+			.reg_off = HHI_PCIE_PLL_CNTL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.l = {
+			.reg_off = HHI_PCIE_PLL_CNTL,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.rst = {
+			.reg_off = HHI_PCIE_PLL_CNTL,
+			.shift   = 29,
+			.width   = 1,
+		},
+		.table = axg_pcie_pll_rate_table,
+		.init_regs = axg_pcie_init_regs,
+		.init_count = ARRAY_SIZE(axg_pcie_init_regs),
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pcie_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "xtal" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap axg_pcie_mux = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_PCIE_PLL_CNTL6,
+		.mask = 0x1,
+		.shift = 2,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pcie_mux",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = (const char *[]){ "mpll3", "pcie_pll" },
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap axg_pcie_ref = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_PCIE_PLL_CNTL6,
+		.mask = 0x1,
+		.shift = 1,
+		/* skip the parent 0, reserved for debug */
+		.table = (u32[]){ 1 },
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pcie_ref",
+		.ops = &clk_regmap_mux_ops,
+		.parent_names = (const char *[]){ "pcie_mux" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap axg_pcie_cml_en0 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_PCIE_PLL_CNTL6,
+		.bit_idx = 4,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pcie_cml_en0",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "pcie_ref" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+
+	},
+};
+
+static struct clk_regmap axg_pcie_cml_en1 = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_PCIE_PLL_CNTL6,
+		.bit_idx = 3,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pcie_cml_en1",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "pcie_ref" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 static u32 mux_table_clk81[]	= { 0, 2, 3, 4, 5, 6, 7 };
 static const char * const clk81_parent_names[] = {
 	"xtal", "fclk_div7", "mpll1", "mpll2", "fclk_div4",
@@ -779,6 +909,63 @@ static struct clk_regmap axg_sd_emmc_c_clk0 = {
 	},
 };

+static u32 mux_table_gen_clk[]	= { 0, 4, 5, 6, 7, 8,
+				    9, 10, 11, 13, 14, };
+static const char * const gen_clk_parent_names[] = {
+	"xtal", "hifi_pll", "mpll0", "mpll1", "mpll2", "mpll3",
+	"fclk_div4", "fclk_div3", "fclk_div5", "fclk_div7", "gp0_pll",
+};
+
+static struct clk_regmap axg_gen_clk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_GEN_CLK_CNTL,
+		.mask = 0xf,
+		.shift = 12,
+		.table = mux_table_gen_clk,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_clk_sel",
+		.ops = &clk_regmap_mux_ops,
+		/*
+		 * bits 15:12 selects from 14 possible parents:
+		 * xtal, [rtc_oscin_i], [sys_cpu_div16], [ddr_dpll_pt],
+		 * hifi_pll, mpll0, mpll1, mpll2, mpll3, fdiv4,
+		 * fdiv3, fdiv5, [cts_msr_clk], fdiv7, gp0_pll
+		 */
+		.parent_names = gen_clk_parent_names,
+		.num_parents = ARRAY_SIZE(gen_clk_parent_names),
+	},
+};
+
+static struct clk_regmap axg_gen_clk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_GEN_CLK_CNTL,
+		.shift = 0,
+		.width = 11,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_clk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "gen_clk_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap axg_gen_clk = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_GEN_CLK_CNTL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_clk",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "gen_clk_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 /* Everything Else (EE) domain gates */
 static MESON_GATE(axg_ddr, HHI_GCLK_MPEG0, 0);
 static MESON_GATE(axg_audio_locker, HHI_GCLK_MPEG0, 2);
@@ -821,6 +1008,7 @@ static MESON_GATE(axg_mmc_pclk, HHI_GCLK_MPEG2, 11);
 static MESON_GATE(axg_vpu_intr, HHI_GCLK_MPEG2, 25);
 static MESON_GATE(axg_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
 static MESON_GATE(axg_gic, HHI_GCLK_MPEG2, 30);
+static MESON_GATE(axg_mipi_enable, HHI_MIPI_CNTL0, 29);

 /* Always On (AO) domain gates */

@@ -910,6 +1098,15 @@ static struct clk_hw_onecell_data axg_hw_onecell_data = {
 		[CLKID_FCLK_DIV4_DIV]		= &axg_fclk_div4_div.hw,
 		[CLKID_FCLK_DIV5_DIV]		= &axg_fclk_div5_div.hw,
 		[CLKID_FCLK_DIV7_DIV]		= &axg_fclk_div7_div.hw,
+		[CLKID_PCIE_PLL]		= &axg_pcie_pll.hw,
+		[CLKID_PCIE_MUX]		= &axg_pcie_mux.hw,
+		[CLKID_PCIE_REF]		= &axg_pcie_ref.hw,
+		[CLKID_PCIE_CML_EN0]		= &axg_pcie_cml_en0.hw,
+		[CLKID_PCIE_CML_EN1]		= &axg_pcie_cml_en1.hw,
+		[CLKID_MIPI_ENABLE]		= &axg_mipi_enable.hw,
+		[CLKID_GEN_CLK_SEL]		= &axg_gen_clk_sel.hw,
+		[CLKID_GEN_CLK_DIV]		= &axg_gen_clk_div.hw,
+		[CLKID_GEN_CLK]			= &axg_gen_clk.hw,
 		[NR_CLKS]			= NULL,
 	},
 	.num = NR_CLKS,
@@ -988,6 +1185,15 @@ static struct clk_regmap *const axg_clk_regmaps[] = {
 	&axg_fclk_div4,
 	&axg_fclk_div5,
 	&axg_fclk_div7,
+	&axg_pcie_pll,
+	&axg_pcie_mux,
+	&axg_pcie_ref,
+	&axg_pcie_cml_en0,
+	&axg_pcie_cml_en1,
+	&axg_mipi_enable,
+	&axg_gen_clk_sel,
+	&axg_gen_clk_div,
+	&axg_gen_clk,
 };

 static const struct of_device_id clkc_match_table[] = {
@@ -995,49 +1201,17 @@ static const struct of_device_id clkc_match_table[] = {
 	{}
 };

-static const struct regmap_config clkc_regmap_config = {
-	.reg_bits       = 32,
-	.val_bits       = 32,
-	.reg_stride     = 4,
-};
-
 static int axg_clkc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct resource *res;
-	void __iomem *clk_base = NULL;
 	struct regmap *map;
 	int ret, i;

 	/* Get the hhi system controller node if available */
 	map = syscon_node_to_regmap(of_get_parent(dev->of_node));
 	if (IS_ERR(map)) {
-		dev_err(dev,
-			"failed to get HHI regmap - Trying obsolete regs\n");
-
-		/*
-		 * FIXME: HHI registers should be accessed through
-		 * the appropriate system controller. This is required because
-		 * there is more than just clocks in this register space
-		 *
-		 * This fallback method is only provided temporarily until
-		 * all the platform DTs are properly using the syscon node
-		 */
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		if (!res)
-			return -EINVAL;
-
-
-		clk_base = devm_ioremap(dev, res->start, resource_size(res));
-		if (!clk_base) {
-			dev_err(dev, "Unable to map clk base\n");
-			return -ENXIO;
-		}
-
-		map = devm_regmap_init_mmio(dev, clk_base,
-					    &clkc_regmap_config);
-		if (IS_ERR(map))
-			return PTR_ERR(map);
+		dev_err(dev, "failed to get HHI regmap\n");
+		return PTR_ERR(map);
 	}

 	/* Populate regmap for the regmap backed clocks */

--- a/drivers/clk/meson/axg.h
+++ b/drivers/clk/meson/axg.h
@@ -16,6 +16,7 @@
 * Register offsets from the data sheet must be multiplied by 4 before
 * adding them to the base address to get the right value.
 */
+#define HHI_MIPI_CNTL0			0x00
 #define HHI_GP0_PLL_CNTL		0x40
 #define HHI_GP0_PLL_CNTL2		0x44
 #define HHI_GP0_PLL_CNTL3		0x48
@@ -127,8 +128,13 @@
 #define CLKID_FCLK_DIV4_DIV			73
 #define CLKID_FCLK_DIV5_DIV			74
 #define CLKID_FCLK_DIV7_DIV			75
+#define CLKID_PCIE_PLL				76
+#define CLKID_PCIE_MUX				77
+#define CLKID_PCIE_REF				78
+#define CLKID_GEN_CLK_SEL			82
+#define CLKID_GEN_CLK_DIV			83

-#define NR_CLKS					76
+#define NR_CLKS					85

 /* include the CLKIDs that have been made part of the DT binding */
 #include <dt-bindings/clock/axg-clkc.h>

--- a/drivers/clk/meson/clk-audio-divider.c
+++ b/drivers/clk/meson/clk-audio-divider.c
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2017 AmLogic, Inc.
- * Author: Jerome Brunet <jbrunet@baylibre.com>
- */
-
-/*
- * i2s master clock divider: The algorithm of the generic clk-divider used with
- * a very precise clock parent such as the mpll tends to select a low divider
- * factor. This gives poor results with this particular divider, especially with
- * high frequencies (> 100 MHz)
- *
- * This driver try to select the maximum possible divider with the rate the
- * upstream clock can provide.
- */
-
-#include <linux/clk-provider.h>
-#include "clkc.h"
-
-static inline struct meson_clk_audio_div_data *
-meson_clk_audio_div_data(struct clk_regmap *clk)
-{
-	return (struct meson_clk_audio_div_data *)clk->data;
-}
-
-static int _div_round(unsigned long parent_rate, unsigned long rate,
-		      unsigned long flags)
-{
-	if (flags & CLK_DIVIDER_ROUND_CLOSEST)
-		return DIV_ROUND_CLOSEST_ULL((u64)parent_rate, rate);
-
-	return DIV_ROUND_UP_ULL((u64)parent_rate, rate);
-}
-
-static int _get_val(unsigned long parent_rate, unsigned long rate)
-{
-	return DIV_ROUND_UP_ULL((u64)parent_rate, rate) - 1;
-}
-
-static int _valid_divider(unsigned int width, int divider)
-{
-	int max_divider = 1 << width;
-
-	return clamp(divider, 1, max_divider);
-}
-
-static unsigned long audio_divider_recalc_rate(struct clk_hw *hw,
-					       unsigned long parent_rate)
-{
-	struct clk_regmap *clk = to_clk_regmap(hw);
-	struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk);
-	unsigned long divider;
-
-	divider = meson_parm_read(clk->map, &adiv->div);
-
-	return DIV_ROUND_UP_ULL((u64)parent_rate, divider);
-}
-
-static long audio_divider_round_rate(struct clk_hw *hw,
-				     unsigned long rate,
-				     unsigned long *parent_rate)
-{
-	struct clk_regmap *clk = to_clk_regmap(hw);
-	struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk);
-	unsigned long max_prate;
-	int divider;
-
-	if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
-		divider = _div_round(*parent_rate, rate, adiv->flags);
-		divider = _valid_divider(adiv->div.width, divider);
-		return DIV_ROUND_UP_ULL((u64)*parent_rate, divider);
-	}
-
-	/* Get the maximum parent rate */
-	max_prate = clk_hw_round_rate(clk_hw_get_parent(hw), ULONG_MAX);
-
-	/* Get the corresponding rounded down divider */
-	divider = max_prate / rate;
-	divider = _valid_divider(adiv->div.width, divider);
-
-	/* Get actual rate of the parent */
-	*parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
-					 divider * rate);
-
-	return DIV_ROUND_UP_ULL((u64)*parent_rate, divider);
-}
-
-static int audio_divider_set_rate(struct clk_hw *hw,
-				  unsigned long rate,
-				  unsigned long parent_rate)
-{
-	struct clk_regmap *clk = to_clk_regmap(hw);
-	struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk);
-	int val = _get_val(parent_rate, rate);
-
-	meson_parm_write(clk->map, &adiv->div, val);
-
-	return 0;
-}
-
-const struct clk_ops meson_clk_audio_divider_ro_ops = {
-	.recalc_rate	= audio_divider_recalc_rate,
-	.round_rate	= audio_divider_round_rate,
-};
-
-const struct clk_ops meson_clk_audio_divider_ops = {
-	.recalc_rate	= audio_divider_recalc_rate,
-	.round_rate	= audio_divider_round_rate,
-	.set_rate	= audio_divider_set_rate,
-};
--- a/drivers/clk/meson/clk-phase.c
+++ b/drivers/clk/meson/clk-phase.c
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#include <linux/clk-provider.h>
+#include "clkc.h"
+
+#define phase_step(_width) (360 / (1 << (_width)))
+
+static inline struct meson_clk_phase_data *
+meson_clk_phase_data(struct clk_regmap *clk)
+{
+	return (struct meson_clk_phase_data *)clk->data;
+}
+
+int meson_clk_degrees_from_val(unsigned int val, unsigned int width)
+{
+	return phase_step(width) * val;
+}
+EXPORT_SYMBOL_GPL(meson_clk_degrees_from_val);
+
+unsigned int meson_clk_degrees_to_val(int degrees, unsigned int width)
+{
+	unsigned int val = DIV_ROUND_CLOSEST(degrees, phase_step(width));
+
+	/*
+	 * This last calculation is here for cases when degrees is rounded
+	 * to 360, in which case val == (1 << width).
+	 */
+	return val % (1 << width);
+}
+EXPORT_SYMBOL_GPL(meson_clk_degrees_to_val);
+
+static int meson_clk_phase_get_phase(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_clk_phase_data *phase = meson_clk_phase_data(clk);
+	unsigned int val;
+
+	val = meson_parm_read(clk->map, &phase->ph);
+
+	return meson_clk_degrees_from_val(val, phase->ph.width);
+}
+
+static int meson_clk_phase_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_clk_phase_data *phase = meson_clk_phase_data(clk);
+	unsigned int val;
+
+	val = meson_clk_degrees_to_val(degrees, phase->ph.width);
+	meson_parm_write(clk->map, &phase->ph, val);
+
+	return 0;
+}
+
+const struct clk_ops meson_clk_phase_ops = {
+	.get_phase	= meson_clk_phase_get_phase,
+	.set_phase	= meson_clk_phase_set_phase,
+};
+EXPORT_SYMBOL_GPL(meson_clk_phase_ops);
--- a/drivers/clk/meson/clk-triphase.c
+++ b/drivers/clk/meson/clk-triphase.c
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#include <linux/clk-provider.h>
+#include "clkc-audio.h"
+
+/*
+ * This is a special clock for the audio controller.
+ * The phase of mst_sclk clock output can be controlled independently
+ * for the outside world (ph0), the tdmout (ph1) and tdmin (ph2).
+ * Controlling these 3 phases as just one makes things simpler and
+ * give the same clock view to all the element on the i2s bus.
+ * If necessary, we can still control the phase in the tdm block
+ * which makes these independent control redundant.
+ */
+static inline struct meson_clk_triphase_data *
+meson_clk_triphase_data(struct clk_regmap *clk)
+{
+	return (struct meson_clk_triphase_data *)clk->data;
+}
+
+static void meson_clk_triphase_sync(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_clk_triphase_data *tph = meson_clk_triphase_data(clk);
+	unsigned int val;
+
+	/* Get phase 0 and sync it to phase 1 and 2 */
+	val = meson_parm_read(clk->map, &tph->ph0);
+	meson_parm_write(clk->map, &tph->ph1, val);
+	meson_parm_write(clk->map, &tph->ph2, val);
+}
+
+static int meson_clk_triphase_get_phase(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_clk_triphase_data *tph = meson_clk_triphase_data(clk);
+	unsigned int val;
+
+	/* Phase are in sync, reading phase 0 is enough */
+	val = meson_parm_read(clk->map, &tph->ph0);
+
+	return meson_clk_degrees_from_val(val, tph->ph0.width);
+}
+
+static int meson_clk_triphase_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_clk_triphase_data *tph = meson_clk_triphase_data(clk);
+	unsigned int val;
+
+	val = meson_clk_degrees_to_val(degrees, tph->ph0.width);
+	meson_parm_write(clk->map, &tph->ph0, val);
+	meson_parm_write(clk->map, &tph->ph1, val);
+	meson_parm_write(clk->map, &tph->ph2, val);
+
+	return 0;
+}
+
+const struct clk_ops meson_clk_triphase_ops = {
+	.init		= meson_clk_triphase_sync,
+	.get_phase	= meson_clk_triphase_get_phase,
+	.set_phase	= meson_clk_triphase_set_phase,
+};
+EXPORT_SYMBOL_GPL(meson_clk_triphase_ops);
--- a/drivers/clk/meson/clkc-audio.h
+++ b/drivers/clk/meson/clkc-audio.h
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#ifndef __MESON_CLKC_AUDIO_H
+#define __MESON_CLKC_AUDIO_H
+
+#include "clkc.h"
+
+struct meson_clk_triphase_data {
+	struct parm ph0;
+	struct parm ph1;
+	struct parm ph2;
+};
+
+struct meson_sclk_div_data {
+	struct parm div;
+	struct parm hi;
+	unsigned int cached_div;
+	struct clk_duty cached_duty;
+};
+
+extern const struct clk_ops meson_clk_triphase_ops;
+extern const struct clk_ops meson_sclk_div_ops;
+
+#endif /* __MESON_CLKC_AUDIO_H */
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -91,11 +91,13 @@ struct meson_clk_mpll_data {

 #define CLK_MESON_MPLL_ROUND_CLOSEST	BIT(0)

-struct meson_clk_audio_div_data {
-	struct parm div;
-	u8 flags;
+struct meson_clk_phase_data {
+	struct parm ph;
 };

+int meson_clk_degrees_from_val(unsigned int val, unsigned int width);
+unsigned int meson_clk_degrees_to_val(int degrees, unsigned int width);
+
 #define MESON_GATE(_name, _reg, _bit)					\
 struct clk_regmap _name = {						\
 	.data = &(struct clk_regmap_gate_data){				\
@@ -117,7 +119,6 @@ extern const struct clk_ops meson_clk_pll_ops;
 extern const struct clk_ops meson_clk_cpu_ops;
 extern const struct clk_ops meson_clk_mpll_ro_ops;
 extern const struct clk_ops meson_clk_mpll_ops;
-extern const struct clk_ops meson_clk_audio_divider_ro_ops;
-extern const struct clk_ops meson_clk_audio_divider_ops;
+extern const struct clk_ops meson_clk_phase_ops;

 #endif /* __CLKC_H */
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -7,7 +7,6 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/init.h>
-#include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
@@ -498,6 +497,7 @@ static struct clk_regmap gxbb_fclk_div2 = {
 		.ops = &clk_regmap_gate_ops,
 		.parent_names = (const char *[]){ "fclk_div2_div" },
 		.num_parents = 1,
+		.flags = CLK_IS_CRITICAL,
 	},
 };

@@ -970,28 +970,26 @@ static struct clk_regmap gxbb_cts_amclk_sel = {
 		.mask = 0x3,
 		.shift = 9,
 		.table = (u32[]){ 1, 2, 3 },
+		.flags = CLK_MUX_ROUND_CLOSEST,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "cts_amclk_sel",
 		.ops = &clk_regmap_mux_ops,
 		.parent_names = (const char *[]){ "mpll0", "mpll1", "mpll2" },
 		.num_parents = 3,
-		.flags = CLK_SET_RATE_PARENT,
 	},
 };

 static struct clk_regmap gxbb_cts_amclk_div = {
-	.data = &(struct meson_clk_audio_div_data){
-		.div = {
-			.reg_off = HHI_AUD_CLK_CNTL,
-			.shift   = 0,
-			.width   = 8,
-		},
+	.data = &(struct clk_regmap_div_data) {
+		.offset = HHI_AUD_CLK_CNTL,
+		.shift = 0,
+		.width = 8,
 		.flags = CLK_DIVIDER_ROUND_CLOSEST,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "cts_amclk_div",
-		.ops = &meson_clk_audio_divider_ops,
+		.ops = &clk_regmap_divider_ops,
 		.parent_names = (const char *[]){ "cts_amclk_sel" },
 		.num_parents = 1,
 		.flags = CLK_SET_RATE_PARENT,
@@ -1018,13 +1016,13 @@ static struct clk_regmap gxbb_cts_mclk_i958_sel = {
 		.mask = 0x3,
 		.shift = 25,
 		.table = (u32[]){ 1, 2, 3 },
+		.flags = CLK_MUX_ROUND_CLOSEST,
 	},
 	.hw.init = &(struct clk_init_data) {
 		.name = "cts_mclk_i958_sel",
 		.ops = &clk_regmap_mux_ops,
 		.parent_names = (const char *[]){ "mpll0", "mpll1", "mpll2" },
 		.num_parents = 3,
-		.flags = CLK_SET_RATE_PARENT,
 	},
 };

@@ -1626,6 +1624,63 @@ static struct clk_regmap gxbb_vdec_hevc = {
 	},
 };

+static u32 mux_table_gen_clk[]	= { 0, 4, 5, 6, 7, 8,
+				    9, 10, 11, 13, 14, };
+static const char * const gen_clk_parent_names[] = {
+	"xtal", "vdec_1", "vdec_hevc", "mpll0", "mpll1", "mpll2",
+	"fclk_div4", "fclk_div3", "fclk_div5", "fclk_div7", "gp0_pll",
+};
+
+static struct clk_regmap gxbb_gen_clk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_GEN_CLK_CNTL,
+		.mask = 0xf,
+		.shift = 12,
+		.table = mux_table_gen_clk,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_clk_sel",
+		.ops = &clk_regmap_mux_ops,
+		/*
+		 * bits 15:12 selects from 14 possible parents:
+		 * xtal, [rtc_oscin_i], [sys_cpu_div16], [ddr_dpll_pt],
+		 * vid_pll, vid2_pll (hevc), mpll0, mpll1, mpll2, fdiv4,
+		 * fdiv3, fdiv5, [cts_msr_clk], fdiv7, gp0_pll
+		 */
+		.parent_names = gen_clk_parent_names,
+		.num_parents = ARRAY_SIZE(gen_clk_parent_names),
+	},
+};
+
+static struct clk_regmap gxbb_gen_clk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_GEN_CLK_CNTL,
+		.shift = 0,
+		.width = 11,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_clk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_names = (const char *[]){ "gen_clk_sel" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap gxbb_gen_clk = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_GEN_CLK_CNTL,
+		.bit_idx = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_clk",
+		.ops = &clk_regmap_gate_ops,
+		.parent_names = (const char *[]){ "gen_clk_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 /* Everything Else (EE) domain gates */
 static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
 static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
@@ -1875,6 +1930,9 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
 		[CLKID_VDEC_HEVC_SEL]	    = &gxbb_vdec_hevc_sel.hw,
 		[CLKID_VDEC_HEVC_DIV]	    = &gxbb_vdec_hevc_div.hw,
 		[CLKID_VDEC_HEVC]	    = &gxbb_vdec_hevc.hw,
+		[CLKID_GEN_CLK_SEL]	    = &gxbb_gen_clk_sel.hw,
+		[CLKID_GEN_CLK_DIV]	    = &gxbb_gen_clk_div.hw,
+		[CLKID_GEN_CLK]		    = &gxbb_gen_clk.hw,
 		[NR_CLKS]		    = NULL,
 	},
 	.num = NR_CLKS,
@@ -2037,6 +2095,9 @@ static struct clk_hw_onecell_data gxl_hw_onecell_data = {
 		[CLKID_VDEC_HEVC_SEL]	    = &gxbb_vdec_hevc_sel.hw,
 		[CLKID_VDEC_HEVC_DIV]	    = &gxbb_vdec_hevc_div.hw,
 		[CLKID_VDEC_HEVC]	    = &gxbb_vdec_hevc.hw,
+		[CLKID_GEN_CLK_SEL]	    = &gxbb_gen_clk_sel.hw,
+		[CLKID_GEN_CLK_DIV]	    = &gxbb_gen_clk_div.hw,
+		[CLKID_GEN_CLK]		    = &gxbb_gen_clk.hw,
 		[NR_CLKS]		    = NULL,
 	},
 	.num = NR_CLKS,
@@ -2201,6 +2262,9 @@ static struct clk_regmap *const gx_clk_regmaps[] = {
 	&gxbb_vdec_hevc_sel,
 	&gxbb_vdec_hevc_div,
 	&gxbb_vdec_hevc,
+	&gxbb_gen_clk_sel,
+	&gxbb_gen_clk_div,
+	&gxbb_gen_clk,
 };

 struct clkc_data {
@@ -2227,17 +2291,9 @@ static const struct of_device_id clkc_match_table[] = {
 	{},
 };

-static const struct regmap_config clkc_regmap_config = {
-	.reg_bits       = 32,
-	.val_bits       = 32,
-	.reg_stride     = 4,
-};
-
 static int gxbb_clkc_probe(struct platform_device *pdev)
 {
 	const struct clkc_data *clkc_data;
-	struct resource *res;
-	void __iomem *clk_base;
 	struct regmap *map;
 	int ret, i;
 	struct device *dev = &pdev->dev;
@@ -2249,31 +2305,8 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
 	/* Get the hhi system controller node if available */
 	map = syscon_node_to_regmap(of_get_parent(dev->of_node));
 	if (IS_ERR(map)) {
-		dev_err(dev,
-			"failed to get HHI regmap - Trying obsolete regs\n");
-
-		/*
-		 * FIXME: HHI registers should be accessed through
-		 * the appropriate system controller. This is required because
-		 * there is more than just clocks in this register space
-		 *
-		 * This fallback method is only provided temporarily until
-		 * all the platform DTs are properly using the syscon node
-		 */
-		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-		if (!res)
-			return -EINVAL;
-
-		clk_base = devm_ioremap(dev, res->start, resource_size(res));
-		if (!clk_base) {
-			dev_err(dev, "Unable to map clk base\n");
-			return -ENXIO;
-		}
-
-		map = devm_regmap_init_mmio(dev, clk_base,
-					    &clkc_regmap_config);
-		if (IS_ERR(map))
-			return PTR_ERR(map);
+		dev_err(dev, "failed to get HHI regmap\n");
+		return PTR_ERR(map);
 	}

 	/* Populate regmap for the common regmap backed clocks */

--- a/drivers/clk/meson/gxbb.h
+++ b/drivers/clk/meson/gxbb.h
@@ -66,7 +66,6 @@
 #define HHI_USB_CLK_CNTL		0x220 /* 0x88 offset in data sheet */
 #define HHI_32K_CLK_CNTL		0x224 /* 0x89 offset in data sheet */
 #define HHI_GEN_CLK_CNTL		0x228 /* 0x8a offset in data sheet */
-#define HHI_GEN_CLK_CNTL		0x228 /* 0x8a offset in data sheet */

 #define HHI_PCM_CLK_CNTL		0x258 /* 0x96 offset in data sheet */
 #define HHI_NAND_CLK_CNTL		0x25C /* 0x97 offset in data sheet */
@@ -158,8 +157,10 @@
 #define CLKID_VDEC_1_DIV	  152
 #define CLKID_VDEC_HEVC_SEL	  154
 #define CLKID_VDEC_HEVC_DIV	  155
+#define CLKID_GEN_CLK_SEL	  157
+#define CLKID_GEN_CLK_DIV	  158

-#define NR_CLKS			  157
+#define NR_CLKS			  160

 /* include the CLKIDs that have been made part of the DT binding */
 #include <dt-bindings/clock/gxbb-clkc.h>

--- a/drivers/clk/meson/sclk-div.c
+++ b/drivers/clk/meson/sclk-div.c
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ *
+ * Sample clock generator divider:
+ * This HW divider gates with value 0 but is otherwise a zero based divider:
+ *
+ * val >= 1
+ * divider = val + 1
+ *
+ * The duty cycle may also be set for the LR clock variant. The duty cycle
+ * ratio is:
+ *
+ * hi = [0 - val]
+ * duty_cycle = (1 + hi) / (1 + val)
+ */
+
+#include "clkc-audio.h"
+
+static inline struct meson_sclk_div_data *
+meson_sclk_div_data(struct clk_regmap *clk)
+{
+	return (struct meson_sclk_div_data *)clk->data;
+}
+
+static int sclk_div_maxval(struct meson_sclk_div_data *sclk)
+{
+	return (1 << sclk->div.width) - 1;
+}
+
+static int sclk_div_maxdiv(struct meson_sclk_div_data *sclk)
+{
+	return sclk_div_maxval(sclk) + 1;
+}
+
+static int sclk_div_getdiv(struct clk_hw *hw, unsigned long rate,
+			   unsigned long prate, int maxdiv)
+{
+	int div = DIV_ROUND_CLOSEST_ULL((u64)prate, rate);
+
+	return clamp(div, 2, maxdiv);
+}
+
+static int sclk_div_bestdiv(struct clk_hw *hw, unsigned long rate,
+			    unsigned long *prate,
+			    struct meson_sclk_div_data *sclk)
+{
+	struct clk_hw *parent = clk_hw_get_parent(hw);
+	int bestdiv = 0, i;
+	unsigned long maxdiv, now, parent_now;
+	unsigned long best = 0, best_parent = 0;
+
+	if (!rate)
+		rate = 1;
+
+	maxdiv = sclk_div_maxdiv(sclk);
+
+	if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT))
+		return sclk_div_getdiv(hw, rate, *prate, maxdiv);
+
+	/*
+	 * The maximum divider we can use without overflowing
+	 * unsigned long in rate * i below
+	 */
+	maxdiv = min(ULONG_MAX / rate, maxdiv);
+
+	for (i = 2; i <= maxdiv; i++) {
+		/*
+		 * It's the most ideal case if the requested rate can be
+		 * divided from parent clock without needing to change
+		 * parent rate, so return the divider immediately.
+		 */
+		if (rate * i == *prate)
+			return i;
+
+		parent_now = clk_hw_round_rate(parent, rate * i);
+		now = DIV_ROUND_UP_ULL((u64)parent_now, i);
+
+		if (abs(rate - now) < abs(rate - best)) {
+			bestdiv = i;
+			best = now;
+			best_parent = parent_now;
+		}
+	}
+
+	if (!bestdiv)
+		bestdiv = sclk_div_maxdiv(sclk);
+	else
+		*prate = best_parent;
+
+	return bestdiv;
+}
+
+static long sclk_div_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
+	int div;
+
+	div = sclk_div_bestdiv(hw, rate, prate, sclk);
+
+	return DIV_ROUND_UP_ULL((u64)*prate, div);
+}
+
+static void sclk_apply_ratio(struct clk_regmap *clk,
+			     struct meson_sclk_div_data *sclk)
+{
+	unsigned int hi = DIV_ROUND_CLOSEST(sclk->cached_div *
+					    sclk->cached_duty.num,
+					    sclk->cached_duty.den);
+
+	if (hi)
+		hi -= 1;
+
+	meson_parm_write(clk->map, &sclk->hi, hi);
+}
+
+static int sclk_div_set_duty_cycle(struct clk_hw *hw,
+				   struct clk_duty *duty)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
+
+	if (MESON_PARM_APPLICABLE(&sclk->hi)) {
+		memcpy(&sclk->cached_duty, duty, sizeof(*duty));
+		sclk_apply_ratio(clk, sclk);
+	}
+
+	return 0;
+}
+
+static int sclk_div_get_duty_cycle(struct clk_hw *hw,
+				   struct clk_duty *duty)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
+	int hi;
+
+	if (!MESON_PARM_APPLICABLE(&sclk->hi)) {
+		duty->num = 1;
+		duty->den = 2;
+		return 0;
+	}
+
+	hi = meson_parm_read(clk->map, &sclk->hi);
+	duty->num = hi + 1;
+	duty->den = sclk->cached_div;
+	return 0;
+}
+
+static void sclk_apply_divider(struct clk_regmap *clk,
+			       struct meson_sclk_div_data *sclk)
+{
+	if (MESON_PARM_APPLICABLE(&sclk->hi))
+		sclk_apply_ratio(clk, sclk);
+
+	meson_parm_write(clk->map, &sclk->div, sclk->cached_div - 1);
+}
+
+static int sclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long prate)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
+	unsigned long maxdiv = sclk_div_maxdiv(sclk);
+
+	sclk->cached_div = sclk_div_getdiv(hw, rate, prate, maxdiv);
+
+	if (clk_hw_is_enabled(hw))
+		sclk_apply_divider(clk, sclk);
+
+	return 0;
+}
+
+static unsigned long sclk_div_recalc_rate(struct clk_hw *hw,
+					  unsigned long prate)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
+
+	return DIV_ROUND_UP_ULL((u64)prate, sclk->cached_div);
+}
+
+static int sclk_div_enable(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
+
+	sclk_apply_divider(clk, sclk);
+
+	return 0;
+}
+
+static void sclk_div_disable(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
+
+	meson_parm_write(clk->map, &sclk->div, 0);
+}
+
+static int sclk_div_is_enabled(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
+
+	if (meson_parm_read(clk->map, &sclk->div))
+		return 1;
+
+	return 0;
+}
+
+static void sclk_div_init(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_sclk_div_data *sclk = meson_sclk_div_data(clk);
+	unsigned int val;
+
+	val = meson_parm_read(clk->map, &sclk->div);
+
+	/* if the divider is initially disabled, assume max */
+	if (!val)
+		sclk->cached_div = sclk_div_maxdiv(sclk);
+	else
+		sclk->cached_div = val + 1;
+
+	sclk_div_get_duty_cycle(hw, &sclk->cached_duty);
+}
+
+const struct clk_ops meson_sclk_div_ops = {
+	.recalc_rate	= sclk_div_recalc_rate,
+	.round_rate	= sclk_div_round_rate,
+	.set_rate	= sclk_div_set_rate,
+	.enable		= sclk_div_enable,
+	.disable	= sclk_div_disable,
+	.is_enabled	= sclk_div_is_enabled,
+	.get_duty_cycle	= sclk_div_get_duty_cycle,
+	.set_duty_cycle = sclk_div_set_duty_cycle,
+	.init		= sclk_div_init,
+};
+EXPORT_SYMBOL_GPL(meson_sclk_div_ops);
--- a/drivers/clk/mvebu/armada-37xx-periph.c
+++ b/drivers/clk/mvebu/armada-37xx-periph.c
+// SPDX-License-Identifier: GPL-2.0+
 /*
 * Marvell Armada 37xx SoC Peripheral clocks
 *
@@ -5,10 +6,6 @@
 *
 * Gregory CLEMENT <gregory.clement@free-electrons.com>
 *
- * This file is licensed under the terms of the GNU General Public
- * License version 2 or later. This program is licensed "as is"
- * without any warranty of any kind, whether express or implied.
- *
 * Most of the peripheral clocks can be modelled like this:
 *             _____    _______    _______
 * TBG-A-P  --|     |  |       |  |       |   ______

--- a/drivers/clk/rockchip/Makefile
+++ b/drivers/clk/rockchip/Makefile
@@ -6,12 +6,14 @@
 obj-y	+= clk.o
 obj-y	+= clk-pll.o
 obj-y	+= clk-cpu.o
+obj-y	+= clk-half-divider.o
 obj-y	+= clk-inverter.o
 obj-y	+= clk-mmc-phase.o
 obj-y	+= clk-muxgrf.o
 obj-y	+= clk-ddr.o
 obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o

+obj-y	+= clk-px30.o
 obj-y	+= clk-rv1108.o
 obj-y	+= clk-rk3036.o
 obj-y	+= clk-rk3128.o

--- a/drivers/clk/rockchip/clk-half-divider.c
+++ b/drivers/clk/rockchip/clk-half-divider.c
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
+#include "clk.h"
+
+#define div_mask(width)	((1 << (width)) - 1)
+
+static bool _is_best_half_div(unsigned long rate, unsigned long now,
+			      unsigned long best, unsigned long flags)
+{
+	if (flags & CLK_DIVIDER_ROUND_CLOSEST)
+		return abs(rate - now) < abs(rate - best);
+
+	return now <= rate && now > best;
+}
+
+static unsigned long clk_half_divider_recalc_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	struct clk_divider *divider = to_clk_divider(hw);
+	unsigned int val;
+
+	val = clk_readl(divider->reg) >> divider->shift;
+	val &= div_mask(divider->width);
+	val = val * 2 + 3;
+
+	return DIV_ROUND_UP_ULL(((u64)parent_rate * 2), val);
+}
+
+static int clk_half_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *best_parent_rate, u8 width,
+				    unsigned long flags)
+{
+	unsigned int i, bestdiv = 0;
+	unsigned long parent_rate, best = 0, now, maxdiv;
+	unsigned long parent_rate_saved = *best_parent_rate;
+
+	if (!rate)
+		rate = 1;
+
+	maxdiv = div_mask(width);
+
+	if (!(clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) {
+		parent_rate = *best_parent_rate;
+		bestdiv = DIV_ROUND_UP_ULL(((u64)parent_rate * 2), rate);
+		if (bestdiv < 3)
+			bestdiv = 0;
+		else
+			bestdiv = (bestdiv - 3) / 2;
+		bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv;
+		return bestdiv;
+	}
+
+	/*
+	 * The maximum divider we can use without overflowing
+	 * unsigned long in rate * i below
+	 */
+	maxdiv = min(ULONG_MAX / rate, maxdiv);
+
+	for (i = 0; i <= maxdiv; i++) {
+		if (((u64)rate * (i * 2 + 3)) == ((u64)parent_rate_saved * 2)) {
+			/*
+			 * It's the most ideal case if the requested rate can be
+			 * divided from parent clock without needing to change
+			 * parent rate, so return the divider immediately.
+			 */
+			*best_parent_rate = parent_rate_saved;
+			return i;
+		}
+		parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw),
+						((u64)rate * (i * 2 + 3)) / 2);
+		now = DIV_ROUND_UP_ULL(((u64)parent_rate * 2),
+				       (i * 2 + 3));
+
+		if (_is_best_half_div(rate, now, best, flags)) {
+			bestdiv = i;
+			best = now;
+			*best_parent_rate = parent_rate;
+		}
+	}
+
+	if (!bestdiv) {
+		bestdiv = div_mask(width);
+		*best_parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), 1);
+	}
+
+	return bestdiv;
+}
+
+static long clk_half_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long *prate)
+{
+	struct clk_divider *divider = to_clk_divider(hw);
+	int div;
+
+	div = clk_half_divider_bestdiv(hw, rate, prate,
+				       divider->width,
+				       divider->flags);
+
+	return DIV_ROUND_UP_ULL(((u64)*prate * 2), div * 2 + 3);
+}
+
+static int clk_half_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long parent_rate)
+{
+	struct clk_divider *divider = to_clk_divider(hw);
+	unsigned int value;
+	unsigned long flags = 0;
+	u32 val;
+
+	value = DIV_ROUND_UP_ULL(((u64)parent_rate * 2), rate);
+	value = (value - 3) / 2;
+	value =  min_t(unsigned int, value, div_mask(divider->width));
+
+	if (divider->lock)
+		spin_lock_irqsave(divider->lock, flags);
+	else
+		__acquire(divider->lock);
+
+	if (divider->flags & CLK_DIVIDER_HIWORD_MASK) {
+		val = div_mask(divider->width) << (divider->shift + 16);
+	} else {
+		val = clk_readl(divider->reg);
+		val &= ~(div_mask(divider->width) << divider->shift);
+	}
+	val |= value << divider->shift;
+	clk_writel(val, divider->reg);
+
+	if (divider->lock)
+		spin_unlock_irqrestore(divider->lock, flags);
+	else
+		__release(divider->lock);
+
+	return 0;
+}
+
+const struct clk_ops clk_half_divider_ops = {
+	.recalc_rate = clk_half_divider_recalc_rate,
+	.round_rate = clk_half_divider_round_rate,
+	.set_rate = clk_half_divider_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_half_divider_ops);
+
+/**
+ * Register a clock branch.
+ * Most clock branches have a form like
+ *
+ * src1 --|--\
+ *        |M |--[GATE]-[DIV]-
+ * src2 --|--/
+ *
+ * sometimes without one of those components.
+ */
+struct clk *rockchip_clk_register_halfdiv(const char *name,
+					  const char *const *parent_names,
+					  u8 num_parents, void __iomem *base,
+					  int muxdiv_offset, u8 mux_shift,
+					  u8 mux_width, u8 mux_flags,
+					  u8 div_shift, u8 div_width,
+					  u8 div_flags, int gate_offset,
+					  u8 gate_shift, u8 gate_flags,
+					  unsigned long flags,
+					  spinlock_t *lock)
+{
+	struct clk *clk;
+	struct clk_mux *mux = NULL;
+	struct clk_gate *gate = NULL;
+	struct clk_divider *div = NULL;
+	const struct clk_ops *mux_ops = NULL, *div_ops = NULL,
+			     *gate_ops = NULL;
+
+	if (num_parents > 1) {
+		mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+		if (!mux)
+			return ERR_PTR(-ENOMEM);
+
+		mux->reg = base + muxdiv_offset;
+		mux->shift = mux_shift;
+		mux->mask = BIT(mux_width) - 1;
+		mux->flags = mux_flags;
+		mux->lock = lock;
+		mux_ops = (mux_flags & CLK_MUX_READ_ONLY) ? &clk_mux_ro_ops
+							: &clk_mux_ops;
+	}
+
+	if (gate_offset >= 0) {
+		gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+		if (!gate)
+			goto err_gate;
+
+		gate->flags = gate_flags;
+		gate->reg = base + gate_offset;
+		gate->bit_idx = gate_shift;
+		gate->lock = lock;
+		gate_ops = &clk_gate_ops;
+	}
+
+	if (div_width > 0) {
+		div = kzalloc(sizeof(*div), GFP_KERNEL);
+		if (!div)
+			goto err_div;
+
+		div->flags = div_flags;
+		div->reg = base + muxdiv_offset;
+		div->shift = div_shift;
+		div->width = div_width;
+		div->lock = lock;
+		div_ops = &clk_half_divider_ops;
+	}
+
+	clk = clk_register_composite(NULL, name, parent_names, num_parents,
+				     mux ? &mux->hw : NULL, mux_ops,
+				     div ? &div->hw : NULL, div_ops,
+				     gate ? &gate->hw : NULL, gate_ops,
+				     flags);
+
+	return clk;
+err_div:
+	kfree(gate);
+err_gate:
+	kfree(mux);
+	return ERR_PTR(-ENOMEM);
+}
--- a/drivers/clk/rockchip/clk-px30.c
+++ b/drivers/clk/rockchip/clk-px30.c
--- a/drivers/clk/rockchip/clk-rk3399.c
+++ b/drivers/clk/rockchip/clk-rk3399.c
@@ -631,7 +631,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = {
 	MUX(0, "clk_i2sout_src", mux_i2sch_p, CLK_SET_RATE_PARENT,
 			RK3399_CLKSEL_CON(31), 0, 2, MFLAGS),
 	COMPOSITE_NODIV(SCLK_I2S_8CH_OUT, "clk_i2sout", mux_i2sout_p, CLK_SET_RATE_PARENT,
-			RK3399_CLKSEL_CON(30), 8, 2, MFLAGS,
+			RK3399_CLKSEL_CON(31), 2, 1, MFLAGS,
 			RK3399_CLKGATE_CON(8), 12, GFLAGS),

 	/* uart */
@@ -1523,6 +1523,7 @@ static const char *const rk3399_pmucru_critical_clocks[] __initconst = {
 	"pclk_pmu_src",
 	"fclk_cm0s_src_pmu",
 	"clk_timer_src_pmu",
+	"pclk_rkpwm_pmu",
 };

 static void __init rk3399_clk_init(struct device_node *np)

--- a/drivers/clk/rockchip/clk.c
+++ b/drivers/clk/rockchip/clk.c
@@ -492,6 +492,16 @@ void __init rockchip_clk_register_branches(
 				list->gate_flags, flags, list->child,
 				&ctx->lock);
 			break;
+		case branch_half_divider:
+			clk = rockchip_clk_register_halfdiv(list->name,
+				list->parent_names, list->num_parents,
+				ctx->reg_base, list->muxdiv_offset,
+				list->mux_shift, list->mux_width,
+				list->mux_flags, list->div_shift,
+				list->div_width, list->div_flags,
+				list->gate_offset, list->gate_shift,
+				list->gate_flags, flags, &ctx->lock);
+			break;
 		case branch_gate:
 			flags |= CLK_SET_RATE_PARENT;


--- a/drivers/clk/rockchip/clk.h
+++ b/drivers/clk/rockchip/clk.h
@@ -34,7 +34,46 @@ struct clk;
 #define HIWORD_UPDATE(val, mask, shift) \
 		((val) << (shift) | (mask) << ((shift) + 16))

-/* register positions shared by RV1108, RK2928, RK3036, RK3066, RK3188 and RK3228 */
+/* register positions shared by PX30, RV1108, RK2928, RK3036, RK3066, RK3188 and RK3228 */
+#define BOOST_PLL_H_CON(x)		((x) * 0x4)
+#define BOOST_CLK_CON			0x0008
+#define BOOST_BOOST_CON			0x000c
+#define BOOST_SWITCH_CNT		0x0010
+#define BOOST_HIGH_PERF_CNT0		0x0014
+#define BOOST_HIGH_PERF_CNT1		0x0018
+#define BOOST_STATIS_THRESHOLD		0x001c
+#define BOOST_SHORT_SWITCH_CNT		0x0020
+#define BOOST_SWITCH_THRESHOLD		0x0024
+#define BOOST_FSM_STATUS		0x0028
+#define BOOST_PLL_L_CON(x)		((x) * 0x4 + 0x2c)
+#define BOOST_RECOVERY_MASK		0x1
+#define BOOST_RECOVERY_SHIFT		1
+#define BOOST_SW_CTRL_MASK		0x1
+#define BOOST_SW_CTRL_SHIFT		2
+#define BOOST_LOW_FREQ_EN_MASK		0x1
+#define BOOST_LOW_FREQ_EN_SHIFT		3
+#define BOOST_BUSY_STATE		BIT(8)
+
+#define PX30_PLL_CON(x)			((x) * 0x4)
+#define PX30_CLKSEL_CON(x)		((x) * 0x4 + 0x100)
+#define PX30_CLKGATE_CON(x)		((x) * 0x4 + 0x200)
+#define PX30_GLB_SRST_FST		0xb8
+#define PX30_GLB_SRST_SND		0xbc
+#define PX30_SOFTRST_CON(x)		((x) * 0x4 + 0x300)
+#define PX30_MODE_CON			0xa0
+#define PX30_MISC_CON			0xa4
+#define PX30_SDMMC_CON0			0x380
+#define PX30_SDMMC_CON1			0x384
+#define PX30_SDIO_CON0			0x388
+#define PX30_SDIO_CON1			0x38c
+#define PX30_EMMC_CON0			0x390
+#define PX30_EMMC_CON1			0x394
+
+#define PX30_PMU_PLL_CON(x)		((x) * 0x4)
+#define PX30_PMU_CLKSEL_CON(x)		((x) * 0x4 + 0x40)
+#define PX30_PMU_CLKGATE_CON(x)		((x) * 0x4 + 0x80)
+#define PX30_PMU_MODE			0x0020
+
 #define RV1108_PLL_CON(x)		((x) * 0x4)
 #define RV1108_CLKSEL_CON(x)		((x) * 0x4 + 0x60)
 #define RV1108_CLKGATE_CON(x)		((x) * 0x4 + 0x120)
@@ -354,6 +393,7 @@ enum rockchip_clk_branch_type {
 	branch_inverter,
 	branch_factor,
 	branch_ddrclk,
+	branch_half_divider,
 };

 struct rockchip_clk_branch {
@@ -684,6 +724,79 @@ struct rockchip_clk_branch {
 		.gate_flags	= gf,				\
 	}

+#define COMPOSITE_HALFDIV(_id, cname, pnames, f, mo, ms, mw, mf, ds, dw,\
+			  df, go, gs, gf)				\
+	{							\
+		.id		= _id,				\
+		.branch_type	= branch_half_divider,		\
+		.name		= cname,			\
+		.parent_names	= pnames,			\
+		.num_parents	= ARRAY_SIZE(pnames),		\
+		.flags		= f,				\
+		.muxdiv_offset	= mo,				\
+		.mux_shift	= ms,				\
+		.mux_width	= mw,				\
+		.mux_flags	= mf,				\
+		.div_shift	= ds,				\
+		.div_width	= dw,				\
+		.div_flags	= df,				\
+		.gate_offset	= go,				\
+		.gate_shift	= gs,				\
+		.gate_flags	= gf,				\
+	}
+
+#define COMPOSITE_NOGATE_HALFDIV(_id, cname, pnames, f, mo, ms, mw, mf,	\
+				 ds, dw, df)				\
+	{							\
+		.id		= _id,				\
+		.branch_type	= branch_half_divider,		\
+		.name		= cname,			\
+		.parent_names	= pnames,			\
+		.num_parents	= ARRAY_SIZE(pnames),		\
+		.flags		= f,				\
+		.muxdiv_offset	= mo,				\
+		.mux_shift	= ms,				\
+		.mux_width	= mw,				\
+		.mux_flags	= mf,				\
+		.div_shift	= ds,				\
+		.div_width	= dw,				\
+		.div_flags	= df,				\
+		.gate_offset	= -1,				\
+	}
+
+#define COMPOSITE_NOMUX_HALFDIV(_id, cname, pname, f, mo, ds, dw, df,	\
+			go, gs, gf)				\
+	{							\
+		.id		= _id,				\
+		.branch_type	= branch_half_divider,		\
+		.name		= cname,			\
+		.parent_names	= (const char *[]){ pname },	\
+		.num_parents	= 1,				\
+		.flags		= f,				\
+		.muxdiv_offset	= mo,				\
+		.div_shift	= ds,				\
+		.div_width	= dw,				\
+		.div_flags	= df,				\
+		.gate_offset	= go,				\
+		.gate_shift	= gs,				\
+		.gate_flags	= gf,				\
+	}
+
+#define DIV_HALF(_id, cname, pname, f, o, s, w, df)			\
+	{							\
+		.id		= _id,				\
+		.branch_type	= branch_half_divider,		\
+		.name		= cname,			\
+		.parent_names	= (const char *[]){ pname },	\
+		.num_parents	= 1,				\
+		.flags		= f,				\
+		.muxdiv_offset	= o,				\
+		.div_shift	= s,				\
+		.div_width	= w,				\
+		.div_flags	= df,				\
+		.gate_offset	= -1,				\
+	}
+
 struct rockchip_clk_provider *rockchip_clk_init(struct device_node *np,
 			void __iomem *base, unsigned long nr_clks);
 void rockchip_clk_of_add_provider(struct device_node *np,
@@ -708,6 +821,17 @@ void rockchip_register_restart_notifier(struct rockchip_clk_provider *ctx,

 #define ROCKCHIP_SOFTRST_HIWORD_MASK	BIT(0)

+struct clk *rockchip_clk_register_halfdiv(const char *name,
+					  const char *const *parent_names,
+					  u8 num_parents, void __iomem *base,
+					  int muxdiv_offset, u8 mux_shift,
+					  u8 mux_width, u8 mux_flags,
+					  u8 div_shift, u8 div_width,
+					  u8 div_flags, int gate_offset,
+					  u8 gate_shift, u8 gate_flags,
+					  unsigned long flags,
+					  spinlock_t *lock);
+
 #ifdef CONFIG_RESET_CONTROLLER
 void rockchip_register_softrst(struct device_node *np,
 			       unsigned int num_regs,

--- a/include/dt-bindings/clock/axg-audio-clkc.h
+++ b/include/dt-bindings/clock/axg-audio-clkc.h
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Copyright (c) 2018 Baylibre SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+#ifndef __AXG_AUDIO_CLKC_BINDINGS_H
+#define __AXG_AUDIO_CLKC_BINDINGS_H
+
+#define AUD_CLKID_SLV_SCLK0		9
+#define AUD_CLKID_SLV_SCLK1		10
+#define AUD_CLKID_SLV_SCLK2		11
+#define AUD_CLKID_SLV_SCLK3		12
+#define AUD_CLKID_SLV_SCLK4		13
+#define AUD_CLKID_SLV_SCLK5		14
+#define AUD_CLKID_SLV_SCLK6		15
+#define AUD_CLKID_SLV_SCLK7		16
+#define AUD_CLKID_SLV_SCLK8		17
+#define AUD_CLKID_SLV_SCLK9		18
+#define AUD_CLKID_SLV_LRCLK0		19
+#define AUD_CLKID_SLV_LRCLK1		20
+#define AUD_CLKID_SLV_LRCLK2		21
+#define AUD_CLKID_SLV_LRCLK3		22
+#define AUD_CLKID_SLV_LRCLK4		23
+#define AUD_CLKID_SLV_LRCLK5		24
+#define AUD_CLKID_SLV_LRCLK6		25
+#define AUD_CLKID_SLV_LRCLK7		26
+#define AUD_CLKID_SLV_LRCLK8		27
+#define AUD_CLKID_SLV_LRCLK9		28
+#define AUD_CLKID_DDR_ARB		29
+#define AUD_CLKID_PDM			30
+#define AUD_CLKID_TDMIN_A		31
+#define AUD_CLKID_TDMIN_B		32
+#define AUD_CLKID_TDMIN_C		33
+#define AUD_CLKID_TDMIN_LB		34
+#define AUD_CLKID_TDMOUT_A		35
+#define AUD_CLKID_TDMOUT_B		36
+#define AUD_CLKID_TDMOUT_C		37
+#define AUD_CLKID_FRDDR_A		38
+#define AUD_CLKID_FRDDR_B		39
+#define AUD_CLKID_FRDDR_C		40
+#define AUD_CLKID_TODDR_A		41
+#define AUD_CLKID_TODDR_B		42
+#define AUD_CLKID_TODDR_C		43
+#define AUD_CLKID_LOOPBACK		44
+#define AUD_CLKID_SPDIFIN		45
+#define AUD_CLKID_SPDIFOUT		46
+#define AUD_CLKID_RESAMPLE		47
+#define AUD_CLKID_POWER_DETECT		48
+#define AUD_CLKID_MST_A_MCLK		49
+#define AUD_CLKID_MST_B_MCLK		50
+#define AUD_CLKID_MST_C_MCLK		51
+#define AUD_CLKID_MST_D_MCLK		52
+#define AUD_CLKID_MST_E_MCLK		53
+#define AUD_CLKID_MST_F_MCLK		54
+#define AUD_CLKID_SPDIFOUT_CLK		55
+#define AUD_CLKID_SPDIFIN_CLK		56
+#define AUD_CLKID_PDM_DCLK		57
+#define AUD_CLKID_PDM_SYSCLK		58
+#define AUD_CLKID_MST_A_SCLK		79
+#define AUD_CLKID_MST_B_SCLK		80
+#define AUD_CLKID_MST_C_SCLK		81
+#define AUD_CLKID_MST_D_SCLK		82
+#define AUD_CLKID_MST_E_SCLK		83
+#define AUD_CLKID_MST_F_SCLK		84
+#define AUD_CLKID_MST_A_LRCLK		86
+#define AUD_CLKID_MST_B_LRCLK		87
+#define AUD_CLKID_MST_C_LRCLK		88
+#define AUD_CLKID_MST_D_LRCLK		89
+#define AUD_CLKID_MST_E_LRCLK		90
+#define AUD_CLKID_MST_F_LRCLK		91
+#define AUD_CLKID_TDMIN_A_SCLK_SEL	116
+#define AUD_CLKID_TDMIN_B_SCLK_SEL	117
+#define AUD_CLKID_TDMIN_C_SCLK_SEL	118
+#define AUD_CLKID_TDMIN_LB_SCLK_SEL	119
+#define AUD_CLKID_TDMOUT_A_SCLK_SEL	120
+#define AUD_CLKID_TDMOUT_B_SCLK_SEL	121
+#define AUD_CLKID_TDMOUT_C_SCLK_SEL	122
+#define AUD_CLKID_TDMIN_A_SCLK		123
+#define AUD_CLKID_TDMIN_B_SCLK		124
+#define AUD_CLKID_TDMIN_C_SCLK		125
+#define AUD_CLKID_TDMIN_LB_SCLK		126
+#define AUD_CLKID_TDMOUT_A_SCLK		127
+#define AUD_CLKID_TDMOUT_B_SCLK		128
+#define AUD_CLKID_TDMOUT_C_SCLK		129
+#define AUD_CLKID_TDMIN_A_LRCLK		130
+#define AUD_CLKID_TDMIN_B_LRCLK		131
+#define AUD_CLKID_TDMIN_C_LRCLK		132
+#define AUD_CLKID_TDMIN_LB_LRCLK	133
+#define AUD_CLKID_TDMOUT_A_LRCLK	134
+#define AUD_CLKID_TDMOUT_B_LRCLK	135
+#define AUD_CLKID_TDMOUT_C_LRCLK	136
+
+#endif /* __AXG_AUDIO_CLKC_BINDINGS_H */
--- a/include/dt-bindings/clock/axg-clkc.h
+++ b/include/dt-bindings/clock/axg-clkc.h
@@ -68,5 +68,9 @@
 #define CLKID_SD_EMMC_B_CLK0			59
 #define CLKID_SD_EMMC_C_CLK0			60
 #define CLKID_HIFI_PLL				69
+#define CLKID_PCIE_CML_EN0			79
+#define CLKID_PCIE_CML_EN1			80
+#define CLKID_MIPI_ENABLE			81
+#define CLKID_GEN_CLK				84

 #endif /* __AXG_CLKC_H */
--- a/include/dt-bindings/clock/gxbb-clkc.h
+++ b/include/dt-bindings/clock/gxbb-clkc.h
@@ -127,5 +127,6 @@
 #define CLKID_VAPB		140
 #define CLKID_VDEC_1		153
 #define CLKID_VDEC_HEVC		156
+#define CLKID_GEN_CLK		159

 #endif /* __GXBB_CLKC_H */
--- a/include/dt-bindings/clock/px30-cru.h
+++ b/include/dt-bindings/clock/px30-cru.h
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_PX30_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_PX30_H
+
+/* core clocks */
+#define PLL_APLL		1
+#define PLL_DPLL		2
+#define PLL_CPLL		3
+#define PLL_NPLL		4
+#define APLL_BOOST_H		5
+#define APLL_BOOST_L		6
+#define ARMCLK			7
+
+/* sclk gates (special clocks) */
+#define USB480M			14
+#define SCLK_PDM		15
+#define SCLK_I2S0_TX		16
+#define SCLK_I2S0_TX_OUT	17
+#define SCLK_I2S0_RX		18
+#define SCLK_I2S0_RX_OUT	19
+#define SCLK_I2S1		20
+#define SCLK_I2S1_OUT		21
+#define SCLK_I2S2		22
+#define SCLK_I2S2_OUT		23
+#define SCLK_UART1		24
+#define SCLK_UART2		25
+#define SCLK_UART3		26
+#define SCLK_UART4		27
+#define SCLK_UART5		28
+#define SCLK_I2C0		29
+#define SCLK_I2C1		30
+#define SCLK_I2C2		31
+#define SCLK_I2C3		32
+#define SCLK_I2C4		33
+#define SCLK_PWM0		34
+#define SCLK_PWM1		35
+#define SCLK_SPI0		36
+#define SCLK_SPI1		37
+#define SCLK_TIMER0		38
+#define SCLK_TIMER1		39
+#define SCLK_TIMER2		40
+#define SCLK_TIMER3		41
+#define SCLK_TIMER4		42
+#define SCLK_TIMER5		43
+#define SCLK_TSADC		44
+#define SCLK_SARADC		45
+#define SCLK_OTP		46
+#define SCLK_OTP_USR		47
+#define SCLK_CRYPTO		48
+#define SCLK_CRYPTO_APK		49
+#define SCLK_DDRC		50
+#define SCLK_ISP		51
+#define SCLK_CIF_OUT		52
+#define SCLK_RGA_CORE		53
+#define SCLK_VOPB_PWM		54
+#define SCLK_NANDC		55
+#define SCLK_SDIO		56
+#define SCLK_EMMC		57
+#define SCLK_SFC		58
+#define SCLK_SDMMC		59
+#define SCLK_OTG_ADP		60
+#define SCLK_GMAC_SRC		61
+#define SCLK_GMAC		62
+#define SCLK_GMAC_RX_TX		63
+#define SCLK_MAC_REF		64
+#define SCLK_MAC_REFOUT		65
+#define SCLK_MAC_OUT		66
+#define SCLK_SDMMC_DRV		67
+#define SCLK_SDMMC_SAMPLE	68
+#define SCLK_SDIO_DRV		69
+#define SCLK_SDIO_SAMPLE	70
+#define SCLK_EMMC_DRV		71
+#define SCLK_EMMC_SAMPLE	72
+#define SCLK_GPU		73
+#define SCLK_PVTM		74
+#define SCLK_CORE_VPU		75
+#define SCLK_GMAC_RMII		76
+#define SCLK_UART2_SRC		77
+#define SCLK_NANDC_DIV		78
+#define SCLK_NANDC_DIV50	79
+#define SCLK_SDIO_DIV		80
+#define SCLK_SDIO_DIV50		81
+#define SCLK_EMMC_DIV		82
+#define SCLK_EMMC_DIV50		83
+#define SCLK_DDRCLK		84
+#define SCLK_UART1_SRC		85
+
+/* dclk gates */
+#define DCLK_VOPB		150
+#define DCLK_VOPL		151
+
+/* aclk gates */
+#define ACLK_GPU		170
+#define ACLK_BUS_PRE		171
+#define ACLK_CRYPTO		172
+#define ACLK_VI_PRE		173
+#define ACLK_VO_PRE		174
+#define ACLK_VPU		175
+#define ACLK_PERI_PRE		176
+#define ACLK_GMAC		178
+#define ACLK_CIF		179
+#define ACLK_ISP		180
+#define ACLK_VOPB		181
+#define ACLK_VOPL		182
+#define ACLK_RGA		183
+#define ACLK_GIC		184
+#define ACLK_DCF		186
+#define ACLK_DMAC		187
+#define ACLK_BUS_SRC		188
+#define ACLK_PERI_SRC		189
+
+/* hclk gates */
+#define HCLK_BUS_PRE		240
+#define HCLK_CRYPTO		241
+#define HCLK_VI_PRE		242
+#define HCLK_VO_PRE		243
+#define HCLK_VPU		244
+#define HCLK_PERI_PRE		245
+#define HCLK_MMC_NAND		246
+#define HCLK_SDMMC		247
+#define HCLK_USB		248
+#define HCLK_CIF		249
+#define HCLK_ISP		250
+#define HCLK_VOPB		251
+#define HCLK_VOPL		252
+#define HCLK_RGA		253
+#define HCLK_NANDC		254
+#define HCLK_SDIO		255
+#define HCLK_EMMC		256
+#define HCLK_SFC		257
+#define HCLK_OTG		258
+#define HCLK_HOST		259
+#define HCLK_HOST_ARB		260
+#define HCLK_PDM		261
+#define HCLK_I2S0		262
+#define HCLK_I2S1		263
+#define HCLK_I2S2		264
+
+/* pclk gates */
+#define PCLK_BUS_PRE		320
+#define PCLK_DDR		321
+#define PCLK_VO_PRE		322
+#define PCLK_GMAC		323
+#define PCLK_MIPI_DSI		324
+#define PCLK_MIPIDSIPHY		325
+#define PCLK_MIPICSIPHY		326
+#define PCLK_USB_GRF		327
+#define PCLK_DCF		328
+#define PCLK_UART1		329
+#define PCLK_UART2		330
+#define PCLK_UART3		331
+#define PCLK_UART4		332
+#define PCLK_UART5		333
+#define PCLK_I2C0		334
+#define PCLK_I2C1		335
+#define PCLK_I2C2		336
+#define PCLK_I2C3		337
+#define PCLK_I2C4		338
+#define PCLK_PWM0		339
+#define PCLK_PWM1		340
+#define PCLK_SPI0		341
+#define PCLK_SPI1		342
+#define PCLK_SARADC		343
+#define PCLK_TSADC		344
+#define PCLK_TIMER		345
+#define PCLK_OTP_NS		346
+#define PCLK_WDT_NS		347
+#define PCLK_GPIO1		348
+#define PCLK_GPIO2		349
+#define PCLK_GPIO3		350
+#define PCLK_ISP		351
+#define PCLK_CIF		352
+#define PCLK_OTP_PHY		353
+
+#define CLK_NR_CLKS		(PCLK_OTP_PHY + 1)
+
+/* pmu-clocks indices */
+
+#define PLL_GPLL		1
+
+#define SCLK_RTC32K_PMU		4
+#define SCLK_WIFI_PMU		5
+#define SCLK_UART0_PMU		6
+#define SCLK_PVTM_PMU		7
+#define PCLK_PMU_PRE		8
+#define SCLK_REF24M_PMU		9
+#define SCLK_USBPHY_REF		10
+#define SCLK_MIPIDSIPHY_REF	11
+
+#define XIN24M_DIV		12
+
+#define PCLK_GPIO0_PMU		20
+#define PCLK_UART0_PMU		21
+
+#define CLKPMU_NR_CLKS		(PCLK_UART0_PMU + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0_PO		0
+#define SRST_CORE1_PO		1
+#define SRST_CORE2_PO		2
+#define SRST_CORE3_PO		3
+#define SRST_CORE0		4
+#define SRST_CORE1		5
+#define SRST_CORE2		6
+#define SRST_CORE3		7
+#define SRST_CORE0_DBG		8
+#define SRST_CORE1_DBG		9
+#define SRST_CORE2_DBG		10
+#define SRST_CORE3_DBG		11
+#define SRST_TOPDBG		12
+#define SRST_CORE_NOC		13
+#define SRST_STRC_A		14
+#define SRST_L2C		15
+
+#define SRST_DAP		16
+#define SRST_CORE_PVTM		17
+#define SRST_GPU		18
+#define SRST_GPU_NIU		19
+#define SRST_UPCTL2		20
+#define SRST_UPCTL2_A		21
+#define SRST_UPCTL2_P		22
+#define SRST_MSCH		23
+#define SRST_MSCH_P		24
+#define SRST_DDRMON_P		25
+#define SRST_DDRSTDBY_P		26
+#define SRST_DDRSTDBY		27
+#define SRST_DDRGRF_p		28
+#define SRST_AXI_SPLIT_A	29
+#define SRST_AXI_CMD_A		30
+#define SRST_AXI_CMD_P		31
+
+#define SRST_DDRPHY		32
+#define SRST_DDRPHYDIV		33
+#define SRST_DDRPHY_P		34
+#define SRST_VPU_A		36
+#define SRST_VPU_NIU_A		37
+#define SRST_VPU_H		38
+#define SRST_VPU_NIU_H		39
+#define SRST_VI_NIU_A		40
+#define SRST_VI_NIU_H		41
+#define SRST_ISP_H		42
+#define SRST_ISP		43
+#define SRST_CIF_A		44
+#define SRST_CIF_H		45
+#define SRST_CIF_PCLKIN		46
+#define SRST_MIPICSIPHY_P	47
+
+#define SRST_VO_NIU_A		48
+#define SRST_VO_NIU_H		49
+#define SRST_VO_NIU_P		50
+#define SRST_VOPB_A		51
+#define SRST_VOPB_H		52
+#define SRST_VOPB		53
+#define SRST_PWM_VOPB		54
+#define SRST_VOPL_A		55
+#define SRST_VOPL_H		56
+#define SRST_VOPL		57
+#define SRST_RGA_A		58
+#define SRST_RGA_H		59
+#define SRST_RGA		60
+#define SRST_MIPIDSI_HOST_P	61
+#define SRST_MIPIDSIPHY_P	62
+#define SRST_VPU_CORE		63
+
+#define SRST_PERI_NIU_A		64
+#define SRST_USB_NIU_H		65
+#define SRST_USB2OTG_H		66
+#define SRST_USB2OTG		67
+#define SRST_USB2OTG_ADP	68
+#define SRST_USB2HOST_H		69
+#define SRST_USB2HOST_ARB_H	70
+#define SRST_USB2HOST_AUX_H	71
+#define SRST_USB2HOST_EHCI	72
+#define SRST_USB2HOST		73
+#define SRST_USBPHYPOR		74
+#define SRST_USBPHY_OTG_PORT	75
+#define SRST_USBPHY_HOST_PORT	76
+#define SRST_USBPHY_GRF		77
+#define SRST_CPU_BOOST_P	78
+#define SRST_CPU_BOOST		79
+
+#define SRST_MMC_NAND_NIU_H	80
+#define SRST_SDIO_H		81
+#define SRST_EMMC_H		82
+#define SRST_SFC_H		83
+#define SRST_SFC		84
+#define SRST_SDCARD_NIU_H	85
+#define SRST_SDMMC_H		86
+#define SRST_NANDC_H		89
+#define SRST_NANDC		90
+#define SRST_GMAC_NIU_A		92
+#define SRST_GMAC_NIU_P		93
+#define SRST_GMAC_A		94
+
+#define SRST_PMU_NIU_P		96
+#define SRST_PMU_SGRF_P		97
+#define SRST_PMU_GRF_P		98
+#define SRST_PMU		99
+#define SRST_PMU_MEM_P		100
+#define SRST_PMU_GPIO0_P	101
+#define SRST_PMU_UART0_P	102
+#define SRST_PMU_CRU_P		103
+#define SRST_PMU_PVTM		104
+#define SRST_PMU_UART		105
+#define SRST_PMU_NIU_H		106
+#define SRST_PMU_DDR_FAIL_SAVE	107
+#define SRST_PMU_CORE_PERF_A	108
+#define SRST_PMU_CORE_GRF_P	109
+#define SRST_PMU_GPU_PERF_A	110
+#define SRST_PMU_GPU_GRF_P	111
+
+#define SRST_CRYPTO_NIU_A	112
+#define SRST_CRYPTO_NIU_H	113
+#define SRST_CRYPTO_A		114
+#define SRST_CRYPTO_H		115
+#define SRST_CRYPTO		116
+#define SRST_CRYPTO_APK		117
+#define SRST_BUS_NIU_H		120
+#define SRST_USB_NIU_P		121
+#define SRST_BUS_TOP_NIU_P	122
+#define SRST_INTMEM_A		123
+#define SRST_GIC_A		124
+#define SRST_ROM_H		126
+#define SRST_DCF_A		127
+
+#define SRST_DCF_P		128
+#define SRST_PDM_H		129
+#define SRST_PDM		130
+#define SRST_I2S0_H		131
+#define SRST_I2S0_TX		132
+#define SRST_I2S1_H		133
+#define SRST_I2S1		134
+#define SRST_I2S2_H		135
+#define SRST_I2S2		136
+#define SRST_UART1_P		137
+#define SRST_UART1		138
+#define SRST_UART2_P		139
+#define SRST_UART2		140
+#define SRST_UART3_P		141
+#define SRST_UART3		142
+#define SRST_UART4_P		143
+
+#define SRST_UART4		144
+#define SRST_UART5_P		145
+#define SRST_UART5		146
+#define SRST_I2C0_P		147
+#define SRST_I2C0		148
+#define SRST_I2C1_P		149
+#define SRST_I2C1		150
+#define SRST_I2C2_P		151
+#define SRST_I2C2		152
+#define SRST_I2C3_P		153
+#define SRST_I2C3		154
+#define SRST_PWM0_P		157
+#define SRST_PWM0		158
+#define SRST_PWM1_P		159
+
+#define SRST_PWM1		160
+#define SRST_SPI0_P		161
+#define SRST_SPI0		162
+#define SRST_SPI1_P		163
+#define SRST_SPI1		164
+#define SRST_SARADC_P		165
+#define SRST_SARADC		166
+#define SRST_TSADC_P		167
+#define SRST_TSADC		168
+#define SRST_TIMER_P		169
+#define SRST_TIMER0		170
+#define SRST_TIMER1		171
+#define SRST_TIMER2		172
+#define SRST_TIMER3		173
+#define SRST_TIMER4		174
+#define SRST_TIMER5		175
+
+#define SRST_OTP_NS_P		176
+#define SRST_OTP_NS_SBPI	177
+#define SRST_OTP_NS_USR		178
+#define SRST_OTP_PHY_P		179
+#define SRST_OTP_PHY		180
+#define SRST_WDT_NS_P		181
+#define SRST_GPIO1_P		182
+#define SRST_GPIO2_P		183
+#define SRST_GPIO3_P		184
+#define SRST_SGRF_P		185
+#define SRST_GRF_P		186
+#define SRST_I2S0_RX		191
+
+#endif