isci: uplevel phy infrastructure

Merge core/scic_sds_phy.[ch] into phy.[ch]
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/scsi/isci/Makefile

@@ -12,4 +12,3 @@ isci-objs := init.o phy.o request.o sata.o \
 	     smp_request.o \
 	     core/scic_sds_port.o \
 	     core/scic_sds_port_configuration_agent.o \
-	     core/scic_sds_phy.o \

drivers/scsi/isci/core/scic_phy.h

-/*
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * BSD LICENSE
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- *   * Redistributions of source code must retain the above copyright
- *     notice, this list of conditions and the following disclaimer.
- *   * Redistributions in binary form must reproduce the above copyright
- *     notice, this list of conditions and the following disclaimer in
- *     the documentation and/or other materials provided with the
- *     distribution.
- *   * Neither the name of Intel Corporation nor the names of its
- *     contributors may be used to endorse or promote products derived
- *     from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _SCIC_PHY_H_
-#define _SCIC_PHY_H_
-
-/**
- * This file contains all of the interface methods that can be called by an
- *    SCIC user on a phy (SAS or SATA) object.
- *
- *
- */
-
-
-#include <scsi/sas.h>
-#include <scsi/libsas.h>
-
-struct scic_sds_phy;
-struct scic_sds_port;
-
-
-enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy);
-
-struct scic_phy_cap {
-	union {
-		struct {
-			/*
-			 * The SAS specification indicates the start bit shall
-			 * always be set to
-			 * 1.  This implementation will have the start bit set
-			 * to 0 if the PHY CAPABILITIES were either not
-			 * received or speed negotiation failed.
-			 */
-			u8 start:1;
-			u8 tx_ssc_type:1;
-			u8 res1:2;
-			u8 req_logical_linkrate:4;
-
-			u32 gen1_no_ssc:1;
-			u32 gen1_ssc:1;
-			u32 gen2_no_ssc:1;
-			u32 gen2_ssc:1;
-			u32 gen3_no_ssc:1;
-			u32 gen3_ssc:1;
-			u32 res2:17;
-			u32 parity:1;
-		};
-		u32 all;
-	};
-}  __packed;
-
-/* this data structure reflects the link layer transmit identification reg */
-struct scic_phy_proto {
-	union {
-		struct {
-			u16 _r_a:1;
-			u16 smp_iport:1;
-			u16 stp_iport:1;
-			u16 ssp_iport:1;
-			u16 _r_b:4;
-			u16 _r_c:1;
-			u16 smp_tport:1;
-			u16 stp_tport:1;
-			u16 ssp_tport:1;
-			u16 _r_d:4;
-		};
-		u16 all;
-	};
-} __packed;
-
-
-/**
- * struct scic_phy_properties - This structure defines the properties common to
- *    all phys that can be retrieved.
- *
- *
- */
-struct scic_phy_properties {
-	/**
-	 * This field specifies the port that currently contains the
-	 * supplied phy.  This field may be set to NULL
-	 * if the phy is not currently contained in a port.
-	 */
-	struct scic_sds_port *owning_port;
-
-	/**
-	 * This field specifies the link rate at which the phy is
-	 * currently operating.
-	 */
-	enum sas_linkrate negotiated_link_rate;
-
-	/**
-	 * This field specifies the index of the phy in relation to other
-	 * phys within the controller.  This index is zero relative.
-	 */
-	u8 index;
-};
-
-/**
- * struct scic_sas_phy_properties - This structure defines the properties,
- *    specific to a SAS phy, that can be retrieved.
- *
- *
- */
-struct scic_sas_phy_properties {
-	/**
-	 * This field delineates the Identify Address Frame received
-	 * from the remote end point.
-	 */
-	struct sas_identify_frame rcvd_iaf;
-
-	/**
-	 * This field delineates the Phy capabilities structure received
-	 * from the remote end point.
-	 */
-	struct scic_phy_cap rcvd_cap;
-
-};
-
-/**
- * struct scic_sata_phy_properties - This structure defines the properties,
- *    specific to a SATA phy, that can be retrieved.
- *
- *
- */
-struct scic_sata_phy_properties {
-	/**
-	 * This field delineates the signature FIS received from the
-	 * attached target.
-	 */
-	struct dev_to_host_fis signature_fis;
-
-	/**
-	 * This field specifies to the user if a port selector is connected
-	 * on the specified phy.
-	 */
-	bool is_port_selector_present;
-
-};
-
-/**
- * enum scic_phy_counter_id - This enumeration depicts the various pieces of
- *    optional information that can be retrieved for a specific phy.
- *
- *
- */
-enum scic_phy_counter_id {
-	/**
-	 * This PHY information field tracks the number of frames received.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_FRAME,
-
-	/**
-	 * This PHY information field tracks the number of frames transmitted.
-	 */
-	SCIC_PHY_COUNTER_TRANSMITTED_FRAME,
-
-	/**
-	 * This PHY information field tracks the number of DWORDs received.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD,
-
-	/**
-	 * This PHY information field tracks the number of DWORDs transmitted.
-	 */
-	SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD,
-
-	/**
-	 * This PHY information field tracks the number of times DWORD
-	 * synchronization was lost.
-	 */
-	SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR,
-
-	/**
-	 * This PHY information field tracks the number of received DWORDs with
-	 * running disparity errors.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR,
-
-	/**
-	 * This PHY information field tracks the number of received frames with a
-	 * CRC error (not including short or truncated frames).
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR,
-
-	/**
-	 * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT)
-	 * primitives received.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT,
-
-	/**
-	 * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT)
-	 * primitives transmitted.
-	 */
-	SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT,
-
-	/**
-	 * This PHY information field tracks the number of times the inactivity
-	 * timer for connections on the phy has been utilized.
-	 */
-	SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED,
-
-	/**
-	 * This PHY information field tracks the number of DONE (CREDIT TIMEOUT)
-	 * primitives received.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT,
-
-	/**
-	 * This PHY information field tracks the number of DONE (CREDIT TIMEOUT)
-	 * primitives transmitted.
-	 */
-	SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT,
-
-	/**
-	 * This PHY information field tracks the number of CREDIT BLOCKED
-	 * primitives received.
-	 * @note Depending on remote device implementation, credit blocks
-	 *       may occur regularly.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED,
-
-	/**
-	 * This PHY information field contains the number of short frames
-	 * received.  A short frame is simply a frame smaller then what is
-	 * allowed by either the SAS or SATA specification.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME,
-
-	/**
-	 * This PHY information field contains the number of frames received after
-	 * credit has been exhausted.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT,
-
-	/**
-	 * This PHY information field contains the number of frames received after
-	 * a DONE has been received.
-	 */
-	SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE,
-
-	/**
-	 * This PHY information field contains the number of times the phy
-	 * failed to achieve DWORD synchronization during speed negotiation.
-	 */
-	SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR
-};
-
-#endif  /* _SCIC_PHY_H_ */

drivers/scsi/isci/core/scic_port.h

@@ -58,7 +58,7 @@
 
 #include "isci.h"
 #include "sas.h"
-#include "scic_phy.h"
+#include "phy.h"
 
 struct scic_sds_port;
 

drivers/scsi/isci/core/scic_sds_port.c

@@ -54,9 +54,7 @@
  */
 
 #include "host.h"
-#include "scic_phy.h"
 #include "scic_port.h"
-#include "scic_sds_phy.h"
 #include "scic_sds_port.h"
 #include "remote_device.h"
 #include "remote_node_context.h"

drivers/scsi/isci/core/scic_sds_port_configuration_agent.h

@@ -64,7 +64,6 @@
  */
 
 #include "scic_sds_port.h"
-#include "scic_sds_phy.h"
 
 struct scic_sds_controller;
 struct scic_sds_port_configuration_agent;

drivers/scsi/isci/port.c

@@ -55,8 +55,6 @@
 
 #include <linux/workqueue.h>
 #include "isci.h"
-#include "scic_phy.h"
-#include "scic_sds_phy.h"
 #include "scic_port.h"
 #include "port.h"
 #include "request.h"

drivers/scsi/isci/remote_device.c

@@ -57,9 +57,7 @@
 #include "port.h"
 #include "remote_device.h"
 #include "request.h"
-#include "scic_phy.h"
 #include "scic_port.h"
-#include "scic_sds_phy.h"
 #include "scic_sds_port.h"
 #include "remote_node_context.h"
 #include "scu_event_codes.h"