m68knommu: make cache push code ColdFire generic

Currently the code to push cache lines is only available to version 4
cores. Version 3 cores may also need to use this if we support copy-
back caches on them. Move this code to make it more generic, and
useful for all version ColdFire cores.

With this in place we can now have a single cache_flush_all() code
path that does all the right things on all version cores.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>

arch/m68k/include/asm/cacheflush_no.h

@@ -30,9 +30,13 @@
 #define copy_from_user_page(vma, page, vaddr, dst, src, len) \
 	memcpy(dst, src, len)
 
-#ifndef __flush_cache_all
+void mcf_cache_push(void);
+
 static inline void __flush_cache_all(void)
 {
+#ifdef CACHE_PUSH
+	mcf_cache_push();
+#endif
 #ifdef CACHE_INVALIDATE
 	__asm__ __volatile__ (
 		"movel	%0, %%d0\n\t"
@@ -41,6 +45,5 @@ static inline void __flush_cache_all(void)
 		: : "i" (CACHE_INVALIDATE) : "d0" );
 #endif
 }
-#endif /* __flush_cache_all */
 
 #endif /* _M68KNOMMU_CACHEFLUSH_H */

arch/m68k/include/asm/m54xxacr.h

@@ -83,46 +83,12 @@
 #define ACR2_MODE	(0x000f0000+INSN_CACHE_MODE)
 #define ACR3_MODE	0
 
-#ifndef __ASSEMBLY__
-
 #if ((DATA_CACHE_MODE & ACR_CM) == ACR_CM_WT)
 #define flush_dcache_range(a, l) do { asm("nop"); } while (0)
 #endif
-
-static inline void __m54xx_flush_cache_all(void)
-{
-	__asm__ __volatile__ (
 #if ((DATA_CACHE_MODE & ACR_CM) == ACR_CM_CP)
-	/*
-	 *	Use cpushl to push and invalidate all cache lines.
-	 *	Gas doesn't seem to know how to generate the ColdFire
-	 *	cpushl instruction... Oh well, bit stuff it for now.
-	 */
-		"clrl	%%d0\n\t"
-		"1:\n\t"
-		"movel	%%d0,%%a0\n\t"
-		"2:\n\t"
-		".word	0xf468\n\t"
-		"addl	%0,%%a0\n\t"
-		"cmpl	%1,%%a0\n\t"
-		"blt	2b\n\t"
-		"addql	#1,%%d0\n\t"
-		"cmpil	%2,%%d0\n\t"
-		"bne	1b\n\t"
+/* Copyback cache mode must push dirty cache lines first */
+#define	CACHE_PUSH
 #endif
-		"movel	%3,%%d0\n\t"
-		"movec	%%d0,%%CACR\n\t"
-		"nop\n\t"	/* forces flush of Store Buffer */
-		: /* No output */
-		: "i" (CACHE_LINE_SIZE),
-		  "i" (DCACHE_SIZE / CACHE_WAYS),
-		  "i" (CACHE_WAYS),
-		  "i" (CACHE_INVALIDATE)
-		: "d0", "a0" );
-}
-
-#define __flush_cache_all() __m54xx_flush_cache_all()
-
-#endif /* __ASSEMBLY__ */
 
 #endif	/* m54xxacr_h */

arch/m68knommu/platform/coldfire/Makefile

@@ -14,7 +14,7 @@
 
 asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
-obj-$(CONFIG_COLDFIRE)	+= clk.o dma.o entry.o vectors.o
+obj-$(CONFIG_COLDFIRE)	+= cache.o clk.o dma.o entry.o vectors.o
 obj-$(CONFIG_M5206)	+= timers.o intc.o
 obj-$(CONFIG_M5206e)	+= timers.o intc.o
 obj-$(CONFIG_M520x)	+= pit.o intc-simr.o

arch/m68knommu/platform/coldfire/cache.c

+/***************************************************************************/
+
+/*
+ *	cache.c -- general ColdFire Cache maintainence code
+ *
+ *	Copyright (C) 2010, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+#ifdef CACHE_PUSH
+/***************************************************************************/
+
+/*
+ *	Use cpushl to push all dirty cache lines back to memory.
+ *	Older versions of GAS don't seem to know how to generate the
+ *	ColdFire cpushl instruction... Oh well, bit stuff it for now.
+ */
+
+void mcf_cache_push(void)
+{
+	__asm__ __volatile__ (
+		"clrl	%%d0\n\t"
+		"1:\n\t"
+		"movel	%%d0,%%a0\n\t"
+		"2:\n\t"
+		".word	0xf468\n\t"
+		"addl	%0,%%a0\n\t"
+		"cmpl	%1,%%a0\n\t"
+		"blt	2b\n\t"
+		"addql	#1,%%d0\n\t"
+		"cmpil	%2,%%d0\n\t"
+		"bne	1b\n\t"
+		: /* No output */
+		: "i" (CACHE_LINE_SIZE),
+		  "i" (DCACHE_SIZE / CACHE_WAYS),
+		  "i" (CACHE_WAYS)
+		: "d0", "a0" );
+}
+
+/***************************************************************************/
+#endif /* CACHE_PUSH */
+/***************************************************************************/