Merge branch 'next/late' with mainline

* next/late: (25 commits)
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  clk: samsung: exynos5433: Add data for 250MHz and 278MHz PLL rates
  clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ARM64: dts: meson-gxbb-vega-s95: Add LED
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -40,6 +40,8 @@ Board compatible values:
   - "hardkernel,odroid-c2" (Meson gxbb)
   - "amlogic,p200" (Meson gxbb)
   - "amlogic,p201" (Meson gxbb)
+  - "wetek,hub" (Meson gxbb)
+  - "wetek,play2" (Meson gxbb)
   - "amlogic,p212" (Meson gxl s905x)
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -329,6 +329,7 @@ virtio	Virtual I/O Device Specification, developed by the OASIS consortium
 vivante	Vivante Corporation
 voipac	Voipac Technologies s.r.o.
 wd	Western Digital Corp.
+wetek	WeTek Electronics, limited.
 wexler	Wexler
 winbond Winbond Electronics corp.
 wlf	Wolfson Microelectronics

arch/arm64/boot/dts/amlogic/Makefile

@@ -5,12 +5,14 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
 
 always		:= $(dtb-y)

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -83,6 +83,7 @@ cpu0: cpu@0 {
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		cpu1: cpu@1 {
@@ -91,6 +92,7 @@ cpu1: cpu@1 {
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		cpu2: cpu@2 {
@@ -99,6 +101,7 @@ cpu2: cpu@2 {
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		cpu3: cpu@3 {
@@ -107,6 +110,7 @@ cpu3: cpu@3 {
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		l2: l2-cache0 {
@@ -171,6 +175,28 @@ bid: bid@46 {
 		};
 	};
 
+	scpi {
+		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+		mboxes = <&mailbox 1 &mailbox 2>;
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+		scpi_clocks: clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: scpi_clocks@0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>;
+				clock-output-names = "vcpu";
+			};
+		};
+
+		scpi_sensors: sensors {
+			compatible = "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -229,6 +255,14 @@ pwm_cd: pwm@8650 {
 				status = "disabled";
 			};
 
+			saradc: adc@8680 {
+				compatible = "amlogic,meson-saradc";
+				reg = <0x0 0x8680 0x0 0x34>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
 			pwm_ef: pwm@86c0 {
 				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 				reg = <0x0 0x086c0 0x0 0x10>;
@@ -282,6 +316,25 @@ gic: interrupt-controller@c4301000 {
 			#address-cells = <0>;
 		};
 
+		sram: sram@c8000000 {
+			compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+			reg = <0x0 0xc8000000 0x0 0x14000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0xc8000000 0x14000>;
+
+			cpu_scp_lpri: scp-shmem@0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13000 0x400>;
+			};
+
+			cpu_scp_hpri: scp-shmem@200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13400 0x400>;
+			};
+		};
+
 		aobus: aobus@c8100000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xc8100000 0x0 0x100000>;
@@ -297,6 +350,21 @@ uart_AO: serial@4c0 {
 				status = "disabled";
 			};
 
+			uart_AO_B: serial@4e0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x004e0 0x0 0x14>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			pwm_AO_ab: pwm@550 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x00550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			ir: ir@580 {
 				compatible = "amlogic,meson-gxbb-ir";
 				reg = <0x0 0x00580 0x0 0x40>;

arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts

@@ -45,10 +45,55 @@
 /dts-v1/;
 
 #include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	compatible = "amlogic,p200", "amlogic,meson-gxbb";
 	model = "Amlogic Meson GXBB P200 Development Board";
+
+	avdd18_usb_adc: regulator-avdd18_usb_adc {
+		compatible = "regulator-fixed";
+		regulator-name = "AVDD18_USB_ADC";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <900000>; /* 50% */
+		};
+
+		button-esc {
+			label = "Esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <684000>; /* 38% */
+		};
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <468000>; /* 26% */
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <252000>; /* 14% */
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <0>; /* 0% */
+		};
+	};
 };
 
 &i2c_B {
@@ -56,3 +101,8 @@ &i2c_B {
 	pinctrl-0 = <&i2c_b_pins>;
 	pinctrl-names = "default";
 };
+
+&saradc {
+	status = "okay";
+	vref-supply = <&avdd18_usb_adc>;
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi

@@ -53,6 +53,17 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "vega-s95:blue:on";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
 	usb_vbus: regulator-usb0-vbus {
 		compatible = "regulator-fixed";
 

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts

+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+	compatible = "wetek,hub", "amlogic,meson-gxbb";
+	model = "WeTek Hub";
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "wetek-play:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	cvbs-connector {
+		status = "disabled";
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts

+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "wetek,play2", "amlogic,meson-gxbb";
+	model = "WeTek Play 2";
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "wetek-play:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+
+		wifi {
+			label = "wetek-play:wifi-status";
+			gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		ethernet {
+			label = "wetek-play:ethernet-status";
+			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -50,28 +50,6 @@
 / {
 	compatible = "amlogic,meson-gxbb";
 
-	scpi {
-		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
-		mboxes = <&mailbox 1 &mailbox 2>;
-		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
-
-		scpi_clocks: clocks {
-			compatible = "arm,scpi-clocks";
-
-			scpi_dvfs: scpi_clocks@0 {
-				compatible = "arm,scpi-dvfs-clocks";
-				#clock-cells = <1>;
-				clock-indices = <0>;
-				clock-output-names = "vcpu";
-			};
-		};
-
-		scpi_sensors: sensors {
-			compatible = "arm,scpi-sensors";
-			#thermal-sensor-cells = <1>;
-		};
-	};
-
 	soc {
 		usb0_phy: phy@c0000000 {
 			compatible = "amlogic,meson-gxbb-usb2-phy";
@@ -93,25 +71,6 @@ usb1_phy: phy@c0000020 {
 			status = "disabled";
 		};
 
-		sram: sram@c8000000 {
-			compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
-			reg = <0x0 0xc8000000 0x0 0x14000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x0 0xc8000000 0x14000>;
-
-			cpu_scp_lpri: scp-shmem@0 {
-				compatible = "amlogic,meson-gxbb-scp-shmem";
-				reg = <0x13000 0x400>;
-			};
-
-			cpu_scp_hpri: scp-shmem@200 {
-				compatible = "amlogic,meson-gxbb-scp-shmem";
-				reg = <0x13400 0x400>;
-			};
-		};
-
 		usb0: usb@c9000000 {
 			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
 			reg = <0x0 0xc9000000 0x0 0x40000>;
@@ -138,22 +97,6 @@ usb1: usb@c9100000 {
 	};
 };
 
-&cpu0 {
-	clocks = <&scpi_dvfs 0>;
-};
-
-&cpu1 {
-	clocks = <&scpi_dvfs 0>;
-};
-
-&cpu2 {
-	clocks = <&scpi_dvfs 0>;
-};
-
-&cpu3 {
-	clocks = <&scpi_dvfs 0>;
-};
-
 &cbus {
 	spifc: spi@8c80 {
 		compatible = "amlogic,meson-gxbb-spifc";
@@ -195,6 +138,29 @@ mux {
 			};
 		};
 
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
 		remote_input_ao_pins: remote_input_ao {
 			mux {
 				groups = "remote_input_ao";
@@ -340,6 +306,14 @@ mux {
 			};
 		};
 
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+			};
+		};
+
 		uart_b_pins: uart_b {
 			mux {
 				groups = "uart_tx_b",
@@ -348,6 +322,14 @@ mux {
 			};
 		};
 
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+			};
+		};
+
 		uart_c_pins: uart_c {
 			mux {
 				groups = "uart_tx_c",
@@ -356,6 +338,14 @@ mux {
 			};
 		};
 
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+			};
+		};
+
 		i2c_a_pins: i2c_a {
 			mux {
 				groups = "i2c_sck_a",
@@ -463,6 +453,20 @@ mux {
 				function = "pwm_f_y";
 			};
 		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+			};
+		};
 	};
 };
 
@@ -486,6 +490,16 @@ &i2c_C {
 	clocks = <&clkc CLKID_I2C>;
 };
 
+&saradc {
+	compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_SAR_ADC>,
+		 <&clkc CLKID_SANA>,
+		 <&clkc CLKID_SAR_ADC_CLK>,
+		 <&clkc CLKID_SAR_ADC_SEL>;
+	clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
+};
+
 &sd_emmc_a {
 	clocks = <&clkc CLKID_SD_EMMC_A>,
 		 <&xtal>,

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -88,12 +88,42 @@ mux {
 			};
 		};
 
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
 		remote_input_ao_pins: remote_input_ao {
 			mux {
 				groups = "remote_input_ao";
 				function = "remote_input_ao";
 			};
 		};
+
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
+			};
+		};
 	};
 };
 
@@ -163,6 +193,14 @@ mux {
 			};
 		};
 
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+			};
+		};
+
 		uart_b_pins: uart_b {
 			mux {
 				groups = "uart_tx_b",
@@ -171,6 +209,14 @@ mux {
 			};
 		};
 
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+			};
+		};
+
 		uart_c_pins: uart_c {
 			mux {
 				groups = "uart_tx_c",
@@ -179,6 +225,14 @@ mux {
 			};
 		};
 
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+			};
+		};
+
 		i2c_a_pins: i2c_a {
 			mux {
 				groups = "i2c_sck_a",
@@ -229,6 +283,20 @@ mux {
 				function = "pwm_e";
 			};
 		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+			};
+		};
 	};
 
 	eth-phy-mux {
@@ -279,6 +347,16 @@ &i2c_C {
 	clocks = <&clkc CLKID_I2C>;
 };
 
+&saradc {
+	compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_SAR_ADC>,
+		 <&clkc CLKID_SANA>,
+		 <&clkc CLKID_SAR_ADC_CLK>,
+		 <&clkc CLKID_SAR_ADC_SEL>;
+	clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
+};
+
 &sd_emmc_a {
 	clocks = <&clkc CLKID_SD_EMMC_A>,
 		 <&xtal>,

arch/arm64/boot/dts/amlogic/meson-gxm.dtsi

@@ -85,6 +85,7 @@ cpu4: cpu@100 {
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		cpu5: cpu@101 {
@@ -93,6 +94,7 @@ cpu5: cpu@101 {
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		cpu6: cpu@102 {
@@ -101,6 +103,7 @@ cpu6: cpu@102 {
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		cpu7: cpu@103 {
@@ -109,10 +112,21 @@ cpu7: cpu@103 {
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 	};
 };
 
+&saradc {
+	compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
+};
+
+&scpi_dvfs {
+	clock-indices = <0 1>;
+	clock-output-names = "vbig", "vlittle";
+};
+
 &vpu {
 	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
 };
+

arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi

@@ -217,18 +217,6 @@ &cmu_aud {
 	assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
 };
 
-&cmu_disp {
-	assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
-			  <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
-			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
-			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
-	assigned-clock-parents = <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
-				 <0>,
-				 <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
-				 <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
-	assigned-clock-rates = <0>, <400000000>;
-};
-
 &cmu_fsys {
 	assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
 		<&cmu_top CLK_MOUT_SCLK_USBHOST30>,

arch/arm64/boot/dts/exynos/exynos5433-tm2.dts

@@ -18,6 +18,40 @@ / {
 	compatible = "samsung,tm2", "samsung,exynos5433";
 };
 
+&cmu_disp {
+	/*
+	 * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
+	 * clocks properties for DISP CMU for each board to keep them together
+	 * for easier review and maintenance.
+	 */
+	assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
+			  <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+			  <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
+			  <&cmu_disp CLK_MOUT_DISP_PLL>,
+			  <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
+	assigned-clock-parents = <0>, <0>,
+				 <&cmu_mif CLK_ACLK_DISP_333>,
+				 <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+				 <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
+				 <&cmu_disp CLK_FOUT_DISP_PLL>,
+				 <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+				 <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
+	assigned-clock-rates = <250000000>, <400000000>;
+};
+
 &hsi2c_9 {
 	status = "okay";
 

arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts

@@ -18,6 +18,40 @@ / {
 	compatible = "samsung,tm2e", "samsung,exynos5433";
 };
 
+&cmu_disp {
+	/*
+	 * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
+	 * clocks properties for DISP CMU for each board to keep them together
+	 * for easier review and maintenance.
+	 */
+	assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
+			  <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+			  <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
+			  <&cmu_disp CLK_MOUT_DISP_PLL>,
+			  <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
+	assigned-clock-parents = <0>, <0>,
+				 <&cmu_mif CLK_ACLK_DISP_333>,
+				 <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+				 <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
+				 <&cmu_disp CLK_FOUT_DISP_PLL>,
+				 <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+				 <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
+	assigned-clock-rates = <278000000>, <400000000>;
+};
+
 &ldo31_reg {
 	regulator-name = "TSP_VDD_1.8V_AP";
 	regulator-min-microvolt = <1800000>;

arch/arm64/boot/dts/exynos/exynos7-espresso.dts

@@ -13,6 +13,7 @@
 #include "exynos7.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@@ -32,6 +33,29 @@ memory@40000000 {
 		device_type = "memory";
 		reg = <0x0 0x40000000 0x0 0xC0000000>;
 	};
+
+	usb30_vbus_reg: regulator-usb30 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb30_vbus_en>;
+		enable-active-high;
+	};
+
+	usb3drd_boost_5v: regulator-usb3drd-boost {
+		compatible = "regulator-fixed";
+		regulator-name = "VUSB_VBUS_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3drd_boost_en>;
+		enable-active-high;
+	};
+
 };
 
 &fin_pll {
@@ -328,8 +352,8 @@ buck10_reg: BUCK10 {
 &pinctrl_alive {
 	pmic_irq: pmic-irq {
 		samsung,pins = "gpa0-2";
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 };
 
@@ -365,3 +389,24 @@ &mmc_2 {
 	vqmmc-supply = <&ldo2_reg>;
 	disable-wp;
 };
+
+&pinctrl_bus1 {
+	usb30_vbus_en: usb30-vbus-en {
+		samsung,pins = "gph1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	usb3drd_boost_en: usb3drd-boost-en {
+		samsung,pins = "gpf4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&usbdrd_phy {
+	vbus-supply = <&usb30_vbus_reg>;
+	vbus-boost-supply = <&usb3drd_boost_5v>;
+};

arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi

@@ -12,6 +12,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_alive {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -187,163 +189,163 @@ gpg3: gpg3 {
 
 	hs_i2c10_bus: hs-i2c10-bus {
 		samsung,pins = "gpb0-1", "gpb0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c11_bus: hs-i2c11-bus {
 		samsung,pins = "gpb0-3", "gpb0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c2_bus: hs-i2c2-bus {
 		samsung,pins = "gpd0-3", "gpd0-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpd1-4", "gpd1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c3_bus: hs-i2c3-bus {
 		samsung,pins = "gpd1-3", "gpd1-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c0_bus: hs-i2c0-bus {
 		samsung,pins = "gpd2-1", "gpd2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c1_bus: hs-i2c1-bus {
 		samsung,pins = "gpd2-3", "gpd2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c9_bus: hs-i2c9-bus {
 		samsung,pins = "gpd2-7", "gpd2-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpd2-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpd2-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpd2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpd2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c8_bus: hs-i2c8-bus {
 		samsung,pins = "gpd5-3", "gpd5-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpd5-0", "gpd5-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c4_bus: hs-i2c4-bus {
 		samsung,pins = "gpg3-1", "gpg3-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c5_bus: hs-i2c5-bus {
 		samsung,pins = "gpg3-3", "gpg3-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -358,9 +360,9 @@ gpj0: gpj0 {
 
 	hs_i2c6_bus: hs-i2c6-bus {
 		samsung,pins = "gpj0-1", "gpj0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -375,9 +377,9 @@ gpj1: gpj1 {
 
 	hs_i2c7_bus: hs-i2c7-bus {
 		samsung,pins = "gpj1-1", "gpj1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -392,9 +394,9 @@ gpg4: gpg4 {
 
 	spi3_bus: spi3-bus {
 		samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -409,9 +411,9 @@ gpv7: gpv7 {
 
 	spi4_bus: spi4-bus {
 		samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -426,37 +428,37 @@ gpr4: gpr4 {
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpr4-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpr4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpr4-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpr4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 };
 
@@ -495,107 +497,107 @@ gpr3: gpr3 {
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpr0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpr0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd0_ds: sd0-ds {
 		samsung,pins = "gpr0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd0_qrdy: sd0-qrdy {
 		samsung,pins = "gpr0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpr1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpr2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpr2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 
 	sd1_ds: sd1-ds {
 		samsung,pins = "gpr2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <6>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
 	};
 
 	sd1_qrdy: sd1-qrdy {
 		samsung,pins = "gpr2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <6>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
 	};
 
 	sd1_int: sd1-int {
 		samsung,pins = "gpr2-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <6>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpr3-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
 		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 };
 
@@ -682,22 +684,22 @@ gpv6: gpv6 {
 
 	spi5_bus: spi5-bus {
 		samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ufs_refclk_out: ufs-refclk-out {
 		samsung,pins = "gpg2-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
 	};
 
 	ufs_rst_n: ufs-rst-n {
 		samsung,pins = "gph1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };

arch/arm64/boot/dts/exynos/exynos7.dtsi

@@ -603,6 +603,40 @@ atlas_thermal: cluster0-thermal {
 				#include "exynos7-trip-points.dtsi"
 			};
 		};
+
+		usbdrd_phy: phy@15500000 {
+			compatible = "samsung,exynos7-usbdrd-phy";
+			reg = <0x15500000 0x100>;
+			clocks = <&clock_fsys0 ACLK_USBDRD300>,
+			       <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>,
+			       <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>,
+			       <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>,
+			       <&clock_fsys0 SCLK_USBDRD300_REFCLK>;
+			clock-names = "phy", "ref", "phy_pipe",
+				"phy_utmi", "itp";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+		};
+
+		usbdrd3 {
+			compatible = "samsung,exynos7-dwusb3";
+			clocks = <&clock_fsys0 ACLK_USBDRD300>,
+			       <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
+			       <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>;
+			clock-names = "usbdrd30", "usbdrd30_susp_clk",
+				"usbdrd30_axius_clk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dwc3@15400000 {
+				compatible = "snps,dwc3";
+				reg = <0x15400000 0x10000>;
+				interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
 	};
 };
 

drivers/clk/meson/gxbb.c

@@ -564,6 +564,46 @@ static struct clk_gate gxbb_clk81 = {
 	},
 };
 
+static struct clk_mux gxbb_sar_adc_clk_sel = {
+	.reg = (void *)HHI_SAR_CLK_CNTL,
+	.mask = 0x3,
+	.shift = 9,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sar_adc_clk_sel",
+		.ops = &clk_mux_ops,
+		/* NOTE: The datasheet doesn't list the parents for bit 10 */
+		.parent_names = (const char *[]){ "xtal", "clk81", },
+		.num_parents = 2,
+	},
+};
+
+static struct clk_divider gxbb_sar_adc_clk_div = {
+	.reg = (void *)HHI_SAR_CLK_CNTL,
+	.shift = 0,
+	.width = 8,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sar_adc_clk_div",
+		.ops = &clk_divider_ops,
+		.parent_names = (const char *[]){ "sar_adc_clk_sel" },
+		.num_parents = 1,
+	},
+};
+
+static struct clk_gate gxbb_sar_adc_clk = {
+	.reg = (void *)HHI_SAR_CLK_CNTL,
+	.bit_idx = 8,
+	.lock = &clk_lock,
+	.hw.init = &(struct clk_init_data){
+		.name = "sar_adc_clk",
+		.ops = &clk_gate_ops,
+		.parent_names = (const char *[]){ "sar_adc_clk_div" },
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 /* Everything Else (EE) domain gates */
 static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);
 static MESON_GATE(gxbb_dos, HHI_GCLK_MPEG0, 1);
@@ -754,6 +794,9 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
 		[CLKID_SD_EMMC_A]	    = &gxbb_emmc_a.hw,
 		[CLKID_SD_EMMC_B]	    = &gxbb_emmc_b.hw,
 		[CLKID_SD_EMMC_C]	    = &gxbb_emmc_c.hw,
+		[CLKID_SAR_ADC_CLK]	    = &gxbb_sar_adc_clk.hw,
+		[CLKID_SAR_ADC_SEL]	    = &gxbb_sar_adc_clk_sel.hw,
+		[CLKID_SAR_ADC_DIV]	    = &gxbb_sar_adc_clk_div.hw,
 	},
 	.num = NR_CLKS,
 };
@@ -856,6 +899,7 @@ static struct clk_gate *gxbb_clk_gates[] = {
 	&gxbb_emmc_a,
 	&gxbb_emmc_b,
 	&gxbb_emmc_c,
+	&gxbb_sar_adc_clk,
 };
 
 static int gxbb_clkc_probe(struct platform_device *pdev)
@@ -888,6 +932,10 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
 	gxbb_mpeg_clk_sel.reg = clk_base + (u64)gxbb_mpeg_clk_sel.reg;
 	gxbb_mpeg_clk_div.reg = clk_base + (u64)gxbb_mpeg_clk_div.reg;
 
+	/* Populate the base address for the SAR ADC clks */
+	gxbb_sar_adc_clk_sel.reg = clk_base + (u64)gxbb_sar_adc_clk_sel.reg;
+	gxbb_sar_adc_clk_div.reg = clk_base + (u64)gxbb_sar_adc_clk_div.reg;
+
 	/* Populate base address for gates */
 	for (i = 0; i < ARRAY_SIZE(gxbb_clk_gates); i++)
 		gxbb_clk_gates[i]->reg = clk_base +

drivers/clk/meson/gxbb.h

@@ -191,7 +191,7 @@
 #define CLKID_PERIPHS		  20
 #define CLKID_SPICC		  21
 /* CLKID_I2C */
-#define CLKID_SAR_ADC		  23
+/* #define CLKID_SAR_ADC */
 #define CLKID_SMART_CARD	  24
 #define CLKID_RNG0		  25
 #define CLKID_UART0		  26
@@ -204,7 +204,7 @@
 #define CLKID_ASSIST_MISC	  33
 /* CLKID_SPI */
 #define CLKID_I2S_SPDIF		  35
-#define CLKID_ETH		  36
+/* CLKID_ETH */
 #define CLKID_DEMUX		  37
 #define CLKID_AIU_GLUE		  38
 #define CLKID_IEC958		  39
@@ -231,13 +231,13 @@
 #define CLKID_AHB_DATA_BUS	  60
 #define CLKID_AHB_CTRL_BUS	  61
 #define CLKID_HDMI_INTR_SYNC	  62
-#define CLKID_HDMI_PCLK		  63
+/* CLKID_HDMI_PCLK */
 /* CLKID_USB1_DDR_BRIDGE */
 /* CLKID_USB0_DDR_BRIDGE */
 #define CLKID_MMC_PCLK		  66
 #define CLKID_DVIN		  67
 #define CLKID_UART2		  68
-#define CLKID_SANA		  69
+/* #define CLKID_SANA */
 #define CLKID_VPU_INTR		  70
 #define CLKID_SEC_AHB_AHB3_BRIDGE 71
 #define CLKID_CLK81_A53		  72
@@ -245,7 +245,7 @@
 #define CLKID_VCLK2_VENCI1	  74
 #define CLKID_VCLK2_VENCP0	  75
 #define CLKID_VCLK2_VENCP1	  76
-#define CLKID_GCLK_VENCI_INT0	  77
+/* CLKID_GCLK_VENCI_INT0 */
 #define CLKID_GCLK_VENCI_INT	  78
 #define CLKID_DAC_CLK		  79
 #define CLKID_AOCLK_GATE	  80
@@ -265,8 +265,11 @@
 /* CLKID_SD_EMMC_A */
 /* CLKID_SD_EMMC_B */
 /* CLKID_SD_EMMC_C */
+/* CLKID_SAR_ADC_CLK */
+/* CLKID_SAR_ADC_SEL */
+#define CLKID_SAR_ADC_DIV	  99
 
-#define NR_CLKS			  97
+#define NR_CLKS			  100
 
 /* include the CLKIDs that have been made part of the stable DT binding */
 #include <dt-bindings/clock/gxbb-clkc.h>

drivers/clk/samsung/clk-exynos5433.c

@@ -739,7 +739,9 @@ static const struct samsung_pll_rate_table exynos5443_pll_rates[] __initconst =
 	PLL_35XX_RATE(350000000U,  350, 6,  2),
 	PLL_35XX_RATE(333000000U,  222, 4,  2),
 	PLL_35XX_RATE(300000000U,  500, 5,  3),
+	PLL_35XX_RATE(278000000U,  556, 6,  3),
 	PLL_35XX_RATE(266000000U,  532, 6,  3),
+	PLL_35XX_RATE(250000000U,  500, 6,  3),
 	PLL_35XX_RATE(200000000U,  400, 6,  3),
 	PLL_35XX_RATE(166000000U,  332, 6,  3),
 	PLL_35XX_RATE(160000000U,  320, 6,  3),
@@ -2559,8 +2561,10 @@ static const struct samsung_fixed_rate_clock disp_fixed_clks[] __initconst = {
 	FRATE(0, "phyclk_mipidphy1_bitclkdiv8_phy", NULL, 0, 188000000),
 	FRATE(0, "phyclk_mipidphy1_rxclkesc0_phy", NULL, 0, 100000000),
 	/* PHY clocks from MIPI_DPHY0 */
-	FRATE(0, "phyclk_mipidphy0_bitclkdiv8_phy", NULL, 0, 188000000),
-	FRATE(0, "phyclk_mipidphy0_rxclkesc0_phy", NULL, 0, 100000000),
+	FRATE(CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY, "phyclk_mipidphy0_bitclkdiv8_phy",
+			NULL, 0, 188000000),
+	FRATE(CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY, "phyclk_mipidphy0_rxclkesc0_phy",
+			NULL, 0, 100000000),
 	/* PHY clocks from HDMI_PHY */
 	FRATE(CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY, "phyclk_hdmiphy_tmds_clko_phy",
 			NULL, 0, 300000000),

include/dt-bindings/clock/exynos5433.h

@@ -771,7 +771,10 @@
 
 #define CLK_PCLK_DECON					113
 
-#define DISP_NR_CLK					114
+#define CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY		114
+#define CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY		115
+
+#define DISP_NR_CLK					116
 
 /* CMU_AUD */
 #define CLK_MOUT_AUD_PLL_USER				1

include/dt-bindings/clock/gxbb-clkc.h

@@ -14,15 +14,21 @@
 #define CLKID_MPLL2		15
 #define CLKID_SPI		34
 #define CLKID_I2C		22
+#define CLKID_SAR_ADC		23
 #define CLKID_ETH		36
 #define CLKID_USB0		50
 #define CLKID_USB1		51
 #define CLKID_USB		55
+#define CLKID_HDMI_PCLK		63
 #define CLKID_USB1_DDR_BRIDGE	64
 #define CLKID_USB0_DDR_BRIDGE	65
+#define CLKID_SANA		69
+#define CLKID_GCLK_VENCI_INT0	77
 #define CLKID_AO_I2C		93
 #define CLKID_SD_EMMC_A		94
 #define CLKID_SD_EMMC_B		95
 #define CLKID_SD_EMMC_C		96
+#define CLKID_SAR_ADC_CLK	97
+#define CLKID_SAR_ADC_SEL	98
 
 #endif /* __GXBB_CLKC_H */

include/dt-bindings/pinctrl/samsung.h

@@ -68,4 +68,12 @@
 #define EXYNOS_PIN_FUNC_6		6
 #define EXYNOS_PIN_FUNC_F		0xf
 
+/* Drive strengths for Exynos7 FSYS1 block */
+#define EXYNOS7_FSYS1_PIN_DRV_LV1	0
+#define EXYNOS7_FSYS1_PIN_DRV_LV2	4
+#define EXYNOS7_FSYS1_PIN_DRV_LV3	2
+#define EXYNOS7_FSYS1_PIN_DRV_LV4	6
+#define EXYNOS7_FSYS1_PIN_DRV_LV5	1
+#define EXYNOS7_FSYS1_PIN_DRV_LV6	5
+
 #endif /* __DT_BINDINGS_PINCTRL_SAMSUNG_H__ */