Commit d4c78d21 authored by Bjorn Andersson's avatar Bjorn Andersson

remoteproc: qcom: Update PIL relocation info on load

Update the PIL relocation information in IMEM with information about
where the firmware for various remoteprocs are loaded.
Reviewed-by: default avatarVinod Koul <vkoul@kernel.org>
Reviewed-by: default avatarStephen Boyd <swboyd@chromium.org>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622191942.255460-4-bjorn.andersson@linaro.orgSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 549b67da
......@@ -135,6 +135,7 @@ config QCOM_Q6V5_ADSP
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
depends on QCOM_SYSMON || QCOM_SYSMON=n
select MFD_SYSCON
select QCOM_PIL_INFO
select QCOM_MDT_LOADER
select QCOM_Q6V5_COMMON
select QCOM_RPROC_COMMON
......@@ -151,6 +152,7 @@ config QCOM_Q6V5_MSS
depends on QCOM_SYSMON || QCOM_SYSMON=n
select MFD_SYSCON
select QCOM_MDT_LOADER
select QCOM_PIL_INFO
select QCOM_Q6V5_COMMON
select QCOM_Q6V5_IPA_NOTIFY
select QCOM_RPROC_COMMON
......@@ -167,6 +169,7 @@ config QCOM_Q6V5_PAS
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
depends on QCOM_SYSMON || QCOM_SYSMON=n
select MFD_SYSCON
select QCOM_PIL_INFO
select QCOM_MDT_LOADER
select QCOM_Q6V5_COMMON
select QCOM_RPROC_COMMON
......@@ -185,6 +188,7 @@ config QCOM_Q6V5_WCSS
depends on QCOM_SYSMON || QCOM_SYSMON=n
select MFD_SYSCON
select QCOM_MDT_LOADER
select QCOM_PIL_INFO
select QCOM_Q6V5_COMMON
select QCOM_RPROC_COMMON
select QCOM_SCM
......@@ -218,6 +222,7 @@ config QCOM_WCNSS_PIL
depends on QCOM_SMEM
depends on QCOM_SYSMON || QCOM_SYSMON=n
select QCOM_MDT_LOADER
select QCOM_PIL_INFO
select QCOM_RPROC_COMMON
select QCOM_SCM
help
......
......@@ -26,6 +26,7 @@
#include <linux/soc/qcom/smem_state.h>
#include "qcom_common.h"
#include "qcom_pil_info.h"
#include "qcom_q6v5.h"
#include "remoteproc_internal.h"
......@@ -82,6 +83,7 @@ struct qcom_adsp {
unsigned int halt_lpass;
int crash_reason_smem;
const char *info_name;
struct completion start_done;
struct completion stop_done;
......@@ -164,10 +166,17 @@ static int qcom_adsp_shutdown(struct qcom_adsp *adsp)
static int adsp_load(struct rproc *rproc, const struct firmware *fw)
{
struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
int ret;
ret = qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, 0,
adsp->mem_region, adsp->mem_phys,
adsp->mem_size, &adsp->mem_reloc);
if (ret)
return ret;
qcom_pil_info_store(adsp->info_name, adsp->mem_phys, adsp->mem_size);
return qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, 0,
adsp->mem_region, adsp->mem_phys, adsp->mem_size,
&adsp->mem_reloc);
return 0;
}
static int adsp_start(struct rproc *rproc)
......@@ -436,6 +445,7 @@ static int adsp_probe(struct platform_device *pdev)
adsp = (struct qcom_adsp *)rproc->priv;
adsp->dev = &pdev->dev;
adsp->rproc = rproc;
adsp->info_name = desc->sysmon_name;
platform_set_drvdata(pdev, adsp);
ret = adsp_alloc_memory_region(adsp);
......
......@@ -29,6 +29,7 @@
#include "remoteproc_internal.h"
#include "qcom_common.h"
#include "qcom_pil_info.h"
#include "qcom_q6v5.h"
#include <linux/qcom_scm.h>
......@@ -1189,6 +1190,8 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
else if (ret < 0)
dev_err(qproc->dev, "MPSS authentication failed: %d\n", ret);
qcom_pil_info_store("modem", qproc->mpss_phys, qproc->mpss_size);
release_firmware:
release_firmware(fw);
out:
......
......@@ -25,6 +25,7 @@
#include <linux/soc/qcom/smem_state.h>
#include "qcom_common.h"
#include "qcom_pil_info.h"
#include "qcom_q6v5.h"
#include "remoteproc_internal.h"
......@@ -64,6 +65,7 @@ struct qcom_adsp {
int pas_id;
int crash_reason_smem;
bool has_aggre2_clk;
const char *info_name;
struct completion start_done;
struct completion stop_done;
......@@ -117,11 +119,17 @@ static void adsp_pds_disable(struct qcom_adsp *adsp, struct device **pds,
static int adsp_load(struct rproc *rproc, const struct firmware *fw)
{
struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
int ret;
return qcom_mdt_load(adsp->dev, fw, rproc->firmware, adsp->pas_id,
adsp->mem_region, adsp->mem_phys, adsp->mem_size,
&adsp->mem_reloc);
ret = qcom_mdt_load(adsp->dev, fw, rproc->firmware, adsp->pas_id,
adsp->mem_region, adsp->mem_phys, adsp->mem_size,
&adsp->mem_reloc);
if (ret)
return ret;
qcom_pil_info_store(adsp->info_name, adsp->mem_phys, adsp->mem_size);
return 0;
}
static int adsp_start(struct rproc *rproc)
......@@ -405,6 +413,7 @@ static int adsp_probe(struct platform_device *pdev)
adsp->rproc = rproc;
adsp->pas_id = desc->pas_id;
adsp->has_aggre2_clk = desc->has_aggre2_clk;
adsp->info_name = desc->sysmon_name;
platform_set_drvdata(pdev, adsp);
device_wakeup_enable(adsp->dev);
......
......@@ -14,6 +14,7 @@
#include <linux/reset.h>
#include <linux/soc/qcom/mdt_loader.h>
#include "qcom_common.h"
#include "qcom_pil_info.h"
#include "qcom_q6v5.h"
#define WCSS_CRASH_REASON 421
......@@ -424,10 +425,17 @@ static void *q6v5_wcss_da_to_va(struct rproc *rproc, u64 da, size_t len)
static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
{
struct q6v5_wcss *wcss = rproc->priv;
int ret;
ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
0, wcss->mem_region, wcss->mem_phys,
wcss->mem_size, &wcss->mem_reloc);
if (ret)
return ret;
qcom_pil_info_store("wcnss", wcss->mem_phys, wcss->mem_size);
return qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
0, wcss->mem_region, wcss->mem_phys,
wcss->mem_size, &wcss->mem_reloc);
return ret;
}
static const struct rproc_ops q6v5_wcss_ops = {
......
......@@ -27,6 +27,7 @@
#include "qcom_common.h"
#include "remoteproc_internal.h"
#include "qcom_pil_info.h"
#include "qcom_wcnss.h"
#define WCNSS_CRASH_REASON_SMEM 422
......@@ -145,10 +146,17 @@ void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss,
static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
{
struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
int ret;
ret = qcom_mdt_load(wcnss->dev, fw, rproc->firmware, WCNSS_PAS_ID,
wcnss->mem_region, wcnss->mem_phys,
wcnss->mem_size, &wcnss->mem_reloc);
if (ret)
return ret;
qcom_pil_info_store("wcnss", wcnss->mem_phys, wcnss->mem_size);
return qcom_mdt_load(wcnss->dev, fw, rproc->firmware, WCNSS_PAS_ID,
wcnss->mem_region, wcnss->mem_phys,
wcnss->mem_size, &wcnss->mem_reloc);
return 0;
}
static void wcnss_indicate_nv_download(struct qcom_wcnss *wcnss)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment