Commit d4cc5f0c authored by Roy Spliet's avatar Roy Spliet Committed by Ben Skeggs

drm/nouveau/fb/ramnv50: Make 0x100da0 per-partition

Like on GT215
Signed-off-by: default avatarRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
parent 7164f4c5
......@@ -42,7 +42,7 @@ struct nv50_ramseq {
struct hwsq_reg r_0x1002d0;
struct hwsq_reg r_0x1002d4;
struct hwsq_reg r_0x1002dc;
struct hwsq_reg r_0x100da0[8];
struct hwsq_reg r_0x100da0;
struct hwsq_reg r_0x100e20;
struct hwsq_reg r_0x100e24;
struct hwsq_reg r_0x611200;
......@@ -70,6 +70,7 @@ nv50_ram_calc(struct nvkm_fb *pfb, u32 freq)
u8 size;
} ramcfg, timing;
u8 ver, hdr, cnt, len, strap;
u32 r100da0;
int N1, M1, N2, M2, P;
int ret, i;
......@@ -109,6 +110,13 @@ nv50_ram_calc(struct nvkm_fb *pfb, u32 freq)
timing.data = 0;
}
/* XXX: 750MHz seems rather arbitrary */
if (freq <= 750000) {
r100da0 = 0x00000010;
} else {
r100da0 = 0x00000000;
}
ret = ram_init(hwsq, nv_subdev(pfb));
if (ret)
return ret;
......@@ -144,10 +152,9 @@ nv50_ram_calc(struct nvkm_fb *pfb, u32 freq)
ram_mask(hwsq, 0x00400c, 0x0000ffff, (N1 << 8) | M1);
ram_mask(hwsq, 0x004008, 0x81ff0000, 0x80000000 | (mpll.bias_p << 19) |
(P << 22) | (P << 16));
#if QFX5800NVA0
for (i = 0; i < 8; i++)
ram_mask(hwsq, 0x100da0[i], 0x00000000, 0x00000000); /*XXX*/
#endif
if (nv_device(pfb)->chipset == 0xa0)
ram_wr32(hwsq, 0x100da0, r100da0); /*XXX: here?*/
ram_nsec(hwsq, 96000); /*XXX*/
ram_mask(hwsq, 0x004008, 0x00002200, 0x00002000);
......@@ -430,8 +437,7 @@ nv50_ram_ctor(struct nvkm_object *parent, struct nvkm_object *engine,
ram->hwsq.r_0x1002d0 = hwsq_reg(0x1002d0);
ram->hwsq.r_0x1002d4 = hwsq_reg(0x1002d4);
ram->hwsq.r_0x1002dc = hwsq_reg(0x1002dc);
for (i = 0; i < 8; i++)
ram->hwsq.r_0x100da0[i] = hwsq_reg(0x100da0 + (i * 0x04));
ram->hwsq.r_0x100da0 = hwsq_stride(0x100da0, 4, ram->base.part_mask);
ram->hwsq.r_0x100e20 = hwsq_reg(0x100e20);
ram->hwsq.r_0x100e24 = hwsq_reg(0x100e24);
ram->hwsq.r_0x611200 = hwsq_reg(0x611200);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment