spi/xilinx: Convert remainding_bytes in remaining words

Simplify the code by using the unit used on most of the code logic.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi-xilinx.c

@@ -86,7 +86,7 @@ struct xilinx_spi {
 
 	u8 *rx_ptr;		/* pointer in the Tx buffer */
 	const u8 *tx_ptr;	/* pointer in the Rx buffer */
-	int remaining_bytes;	/* the number of bytes left to transfer */
+	int remaining_words;	/* the number of words left to transfer */
 	u8 bits_per_word;
 	int buffer_size;	/* buffer size in words */
 	u32 cs_inactive;	/* Level of the CS pins when inactive*/
@@ -231,7 +231,7 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
 
 static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi, int n_words)
 {
-	xspi->remaining_bytes -= n_words * xspi->bits_per_word / 8;
+	xspi->remaining_words -= n_words;
 
 	while (n_words--)
 		xilinx_spi_tx(xspi);
@@ -246,15 +246,14 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 
 	xspi->tx_ptr = t->tx_buf;
 	xspi->rx_ptr = t->rx_buf;
-	xspi->remaining_bytes = t->len;
+	xspi->remaining_words = (t->len * 8) / xspi->bits_per_word;
 	reinit_completion(&xspi->done);
 
-	while (xspi->remaining_bytes) {
+	while (xspi->remaining_words) {
 		u16 cr = 0;
 		int n_words;
 
-		n_words = (xspi->remaining_bytes * 8) / xspi->bits_per_word;
-		n_words = min(n_words, xspi->buffer_size);
+		n_words = min(xspi->remaining_words, xspi->buffer_size);
 
 		xilinx_spi_fill_tx_fifo(xspi, n_words);
 
@@ -286,7 +285,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
 			xilinx_spi_rx(xspi);
 	}
 
-	return t->len - xspi->remaining_bytes;
+	return t->len;
 }