Commit d8196ed2 authored by Mike Christie's avatar Mike Christie Committed by James Bottomley

[SCSI] iscsi class, iscsi_tcp, iser, qla4xxx: add netdevname sysfs attr

iSCSI must support software iscsi (iscsi_tcp, iser), hardware iscsi (qla4xxx),
and partial offload (broadcom). To be able to allow each stack or driver
or port (virtual or physical) to be able to log into the same target portal
we use the initiator tuple [[HWADDRESS | NETDEVNAME], INITIATOR_NAME] and
the target tuple [TARGETNAME, CONN_ADDRESS, CONN_PORT] to id a session.
This patch adds the netdev name, which is used by software iscsi when
it binds a session to a netdevice using the SO_BINDTODEVICE sock opt.
It cannot use HWADDRESS because if someone did vlans then the same netdevice
will have the same mac and the initiator,target id will not be unique.
Signed-off-by: default avatarMike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 22236961
......@@ -583,6 +583,7 @@ static struct iscsi_transport iscsi_iser_transport = {
ISCSI_USERNAME | ISCSI_PASSWORD |
ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN,
.host_param_mask = ISCSI_HOST_HWADDRESS |
ISCSI_HOST_NETDEV_NAME |
ISCSI_HOST_INITIATOR_NAME,
.host_template = &iscsi_iser_sht,
.conndata_size = sizeof(struct iscsi_conn),
......
......@@ -2303,7 +2303,8 @@ static struct iscsi_transport iscsi_tcp_transport = {
ISCSI_USERNAME | ISCSI_PASSWORD |
ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN,
.host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS |
ISCSI_HOST_INITIATOR_NAME,
ISCSI_HOST_INITIATOR_NAME |
ISCSI_HOST_NETDEV_NAME,
.host_template = &iscsi_sht,
.conndata_size = sizeof(struct iscsi_conn),
.max_conn = 1,
......
......@@ -1483,6 +1483,7 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session)
kfree(session->username);
kfree(session->username_in);
kfree(session->targetname);
kfree(session->netdev);
kfree(session->hwaddress);
kfree(session->initiatorname);
......@@ -2040,6 +2041,12 @@ int iscsi_host_get_param(struct Scsi_Host *shost, enum iscsi_host_param param,
int len;
switch (param) {
case ISCSI_HOST_PARAM_NETDEV_NAME:
if (!session->netdev)
len = sprintf(buf, "%s\n", "default");
else
len = sprintf(buf, "%s\n", session->netdev);
break;
case ISCSI_HOST_PARAM_HWADDRESS:
if (!session->hwaddress)
len = sprintf(buf, "%s\n", "default");
......@@ -2067,6 +2074,10 @@ int iscsi_host_set_param(struct Scsi_Host *shost, enum iscsi_host_param param,
struct iscsi_session *session = iscsi_hostdata(shost->hostdata);
switch (param) {
case ISCSI_HOST_PARAM_NETDEV_NAME:
if (!session->netdev)
session->netdev = kstrdup(buf, GFP_KERNEL);
break;
case ISCSI_HOST_PARAM_HWADDRESS:
if (!session->hwaddress)
session->hwaddress = kstrdup(buf, GFP_KERNEL);
......
......@@ -102,7 +102,8 @@ static struct scsi_host_template qla4xxx_driver_template = {
static struct iscsi_transport qla4xxx_iscsi_transport = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
.caps = CAP_FW_DB | CAP_SENDTARGETS_OFFLOAD,
.caps = CAP_FW_DB | CAP_SENDTARGETS_OFFLOAD |
CAP_DATA_PATH_OFFLOAD,
.param_mask = ISCSI_CONN_PORT | ISCSI_CONN_ADDRESS |
ISCSI_TARGET_NAME | ISCSI_TPGT,
.host_param_mask = ISCSI_HOST_HWADDRESS |
......
......@@ -32,7 +32,7 @@
#define ISCSI_SESSION_ATTRS 15
#define ISCSI_CONN_ATTRS 11
#define ISCSI_HOST_ATTRS 3
#define ISCSI_HOST_ATTRS 4
#define ISCSI_TRANSPORT_VERSION "2.0-724"
struct iscsi_internal {
......@@ -1261,8 +1261,9 @@ show_host_param_##param(struct class_device *cdev, char *buf) \
static ISCSI_CLASS_ATTR(host, field, S_IRUGO, show_host_param_##param, \
NULL);
iscsi_host_attr(ipaddress, ISCSI_HOST_PARAM_IPADDRESS);
iscsi_host_attr(netdev, ISCSI_HOST_PARAM_NETDEV_NAME);
iscsi_host_attr(hwaddress, ISCSI_HOST_PARAM_HWADDRESS);
iscsi_host_attr(ipaddress, ISCSI_HOST_PARAM_IPADDRESS);
iscsi_host_attr(initiatorname, ISCSI_HOST_PARAM_INITIATOR_NAME);
#define SETUP_PRIV_SESSION_RD_ATTR(field) \
......@@ -1399,6 +1400,7 @@ iscsi_register_transport(struct iscsi_transport *tt)
priv->t.host_size = sizeof(struct iscsi_host);
transport_container_register(&priv->t.host_attrs);
SETUP_HOST_RD_ATTR(netdev, ISCSI_HOST_NETDEV_NAME);
SETUP_HOST_RD_ATTR(ipaddress, ISCSI_HOST_IPADDRESS);
SETUP_HOST_RD_ATTR(hwaddress, ISCSI_HOST_HWADDRESS);
SETUP_HOST_RD_ATTR(initiatorname, ISCSI_HOST_INITIATOR_NAME);
......
......@@ -271,12 +271,14 @@ enum iscsi_param {
enum iscsi_host_param {
ISCSI_HOST_PARAM_HWADDRESS,
ISCSI_HOST_PARAM_INITIATOR_NAME,
ISCSI_HOST_PARAM_NETDEV_NAME,
ISCSI_HOST_PARAM_IPADDRESS,
ISCSI_HOST_PARAM_MAX,
};
#define ISCSI_HOST_HWADDRESS (1 << ISCSI_HOST_PARAM_HWADDRESS)
#define ISCSI_HOST_INITIATOR_NAME (1 << ISCSI_HOST_PARAM_INITIATOR_NAME)
#define ISCSI_HOST_NETDEV_NAME (1 << ISCSI_HOST_PARAM_NETDEV_NAME)
#define ISCSI_HOST_IPADDRESS (1 << ISCSI_HOST_PARAM_IPADDRESS)
#define iscsi_ptr(_handle) ((void*)(unsigned long)_handle)
......@@ -303,6 +305,7 @@ enum iscsi_host_param {
#define CAP_MARKERS 0x100
#define CAP_FW_DB 0x200
#define CAP_SENDTARGETS_OFFLOAD 0x400
#define CAP_DATA_PATH_OFFLOAD 0x800
/*
* These flags describes reason of stop_conn() call
......
......@@ -228,8 +228,9 @@ struct iscsi_session {
char *password_in;
char *targetname;
char *initiatorname;
/* hw address being used for iscsi connection */
/* hw address or netdev iscsi connection is bound to */
char *hwaddress;
char *netdev;
/* control data */
struct iscsi_transport *tt;
struct Scsi_Host *host;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment