drm/amd/display: move edp fast boot optimization flag to stream

[Why]
During S4/S3 stress test it is possible to resume from S4 without
calling mode set on eDP, meaning high level optimization flag is not
reset. If this is followed by an S3 resume call, driver will see
optimization flag is set and consume it and think backend is powered
on when in fact it is not.

This results in PHY being off in sequence where
S4->Resume->S3->Resume->ApplyOpt->black screen.

[How]
Move optimization flag to stream instead of a DC flag.
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/core/dc_link.c

@@ -2497,8 +2497,8 @@ void core_link_enable_stream(
 
 	/* eDP lit up by bios already, no need to enable again. */
 	if (pipe_ctx->stream->signal == SIGNAL_TYPE_EDP &&
-		core_dc->apply_edp_fast_boot_optimization) {
-		core_dc->apply_edp_fast_boot_optimization = false;
+			pipe_ctx->stream->apply_edp_fast_boot_optimization) {
+		pipe_ctx->stream->apply_edp_fast_boot_optimization = false;
 		pipe_ctx->stream->dpms_off = false;
 		return;
 	}

drivers/gpu/drm/amd/display/dc/dc.h

@@ -311,8 +311,6 @@ struct dc {
 
 	bool optimized_required;
 
-	bool apply_edp_fast_boot_optimization;
-
 	/* FBC compressor */
 	struct compressor *fbc_compressor;
 

drivers/gpu/drm/amd/display/dc/dc_stream.h

@@ -102,6 +102,7 @@ struct dc_stream_state {
 	int phy_pix_clk;
 	enum signal_type signal;
 	bool dpms_off;
+	bool apply_edp_fast_boot_optimization;
 
 	struct dc_stream_status status;
 

drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c

@@ -1557,32 +1557,40 @@ static struct dc_link *get_link_for_edp_not_in_use(
  */
 void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context)
 {
+	int i;
 	struct dc_link *edp_link_to_turnoff = NULL;
 	struct dc_link *edp_link = get_link_for_edp(dc);
-	bool can_eDP_fast_boot_optimize = false;
+	bool can_edp_fast_boot_optimize = false;
+	bool apply_edp_fast_boot_optimization = false;
 
 	if (edp_link) {
 		/* this seems to cause blank screens on DCE8 */
 		if ((dc->ctx->dce_version == DCE_VERSION_8_0) ||
 		    (dc->ctx->dce_version == DCE_VERSION_8_1) ||
 		    (dc->ctx->dce_version == DCE_VERSION_8_3))
-			can_eDP_fast_boot_optimize = false;
+			can_edp_fast_boot_optimize = false;
 		else
-			can_eDP_fast_boot_optimize =
+			can_edp_fast_boot_optimize =
 				edp_link->link_enc->funcs->is_dig_enabled(edp_link->link_enc);
 	}
 
-	if (can_eDP_fast_boot_optimize) {
+	if (can_edp_fast_boot_optimize)
 		edp_link_to_turnoff = get_link_for_edp_not_in_use(dc, context);
 
-		/* if OS doesn't light up eDP and eDP link is available, we want to disable
-		 * If resume from S4/S5, should optimization.
-		 */
-		if (!edp_link_to_turnoff)
-			dc->apply_edp_fast_boot_optimization = true;
+	/* if OS doesn't light up eDP and eDP link is available, we want to disable
+	 * If resume from S4/S5, should optimization.
+	 */
+	if (can_edp_fast_boot_optimize && !edp_link_to_turnoff) {
+		/* Find eDP stream and set optimization flag */
+		for (i = 0; i < context->stream_count; i++) {
+			if (context->streams[i]->signal == SIGNAL_TYPE_EDP) {
+				context->streams[i]->apply_edp_fast_boot_optimization = true;
+				apply_edp_fast_boot_optimization = true;
+			}
+		}
 	}
 
-	if (!dc->apply_edp_fast_boot_optimization) {
+	if (!apply_edp_fast_boot_optimization) {
 		if (edp_link_to_turnoff) {
 			/*turn off backlight before DP_blank and encoder powered down*/
 			dc->hwss.edp_backlight_control(edp_link_to_turnoff, false);