Commit d838ff33 authored by Emilio López's avatar Emilio López

clk: sunxi: add gating support to PLL1

This commit adds gating support to PLL1 on the clock driver. This makes
the PLL1 implementation fully compatible with PLL4 as well.
Signed-off-by: default avatarEmilio López <emilio@elopez.com.ar>
Acked-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: default avatarMike Turquette <mturquette@linaro.org>
parent edaf3fb5
......@@ -7,7 +7,7 @@ This binding uses the common clock binding[1].
Required properties:
- compatible : shall be one of the following:
"allwinner,sun4i-osc-clk" - for a gatable oscillator
"allwinner,sun4i-pll1-clk" - for the main PLL clock
"allwinner,sun4i-pll1-clk" - for the main PLL clock and PLL4
"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
"allwinner,sun4i-axi-clk" - for the AXI clock
......
......@@ -301,11 +301,13 @@ static struct clk_factors_config sun4i_apb1_config = {
};
static const struct factors_data sun4i_pll1_data __initconst = {
.enable = 31,
.table = &sun4i_pll1_config,
.getter = sun4i_get_pll1_factors,
};
static const struct factors_data sun6i_a31_pll1_data __initconst = {
.enable = 31,
.table = &sun6i_a31_pll1_config,
.getter = sun6i_a31_get_pll1_factors,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment