Commit d89c6c0c authored by Takashi Iwai's avatar Takashi Iwai

ALSA: hda - Add TLV_DB_SCALE_MUTE bit for relevant controls

The DACs on Sigmatel/IDT codecs do mute at the lowest volume level,
and in the earlier drivers, we passed TLV_DB_SCALE_MUTE bit for each
volume control element like Speaker and Headphone as well as Master.
Along with the translation to the generic parser, however, the TLV bit
was lost for the slave controls (e.g. Speaker) but set only to
Master.  In theory this should have sufficed, but apps, particularly
PA, do care the slave volume bits, so we seem to see a regression in
the volume controls.

This patch adds a flag to hda_gen_spec to specify the DAC mute
feature, and adds the TLV bit properly for all relevant volume
controls.  Also, the TLV bit for vmaster is set in hda_generic.c, so
that we can get rid of all tricks from the codec driver side.

As the similar hack is applied to Conexant 5051 stuff, we can get rid
of it as well.

BugLink: https://bugs.launchpad.net/bugs/1357928Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent aec856d0
......@@ -31,6 +31,7 @@
#include <linux/module.h>
#include <sound/core.h>
#include <sound/jack.h>
#include <sound/tlv.h>
#include "hda_codec.h"
#include "hda_local.h"
#include "hda_auto_parser.h"
......@@ -1105,6 +1106,7 @@ enum {
*/
static int assign_out_path_ctls(struct hda_codec *codec, struct nid_path *path)
{
struct hda_gen_spec *spec = codec->spec;
hda_nid_t nid;
unsigned int val;
int badness = 0;
......@@ -1119,6 +1121,8 @@ static int assign_out_path_ctls(struct hda_codec *codec, struct nid_path *path)
nid = look_for_out_vol_nid(codec, path);
if (nid) {
val = HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT);
if (spec->dac_min_mute)
val |= HDA_AMP_VAL_MIN_MUTE;
if (is_ctl_used(codec, val, NID_PATH_VOL_CTL))
badness += BAD_SHARED_VOL;
else
......@@ -1880,9 +1884,12 @@ static int parse_output_paths(struct hda_codec *codec)
path = snd_hda_get_path_from_idx(codec, spec->out_paths[0]);
if (path)
spec->vmaster_nid = look_for_out_vol_nid(codec, path);
if (spec->vmaster_nid)
if (spec->vmaster_nid) {
snd_hda_set_vmaster_tlv(codec, spec->vmaster_nid,
HDA_OUTPUT, spec->vmaster_tlv);
if (spec->dac_min_mute)
spec->vmaster_tlv[3] |= TLV_DB_SCALE_MUTE;
}
}
/* set initial pinctl targets */
......
......@@ -231,6 +231,7 @@ struct hda_gen_spec {
unsigned int add_stereo_mix_input:1; /* add aamix as a capture src */
unsigned int add_jack_modes:1; /* add i/o jack mode enum ctls */
unsigned int power_down_unused:1; /* power down unused widgets */
unsigned int dac_min_mute:1; /* minimal = mute for DACs */
/* other internal flags */
unsigned int no_analog:1; /* digital I/O only */
......
......@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <sound/core.h>
#include <sound/jack.h>
#include <sound/tlv.h>
#include "hda_codec.h"
#include "hda_local.h"
......@@ -779,6 +778,7 @@ static const struct hda_model_fixup cxt5066_fixup_models[] = {
*/
static void add_cx5051_fake_mutes(struct hda_codec *codec)
{
struct conexant_spec *spec = codec->spec;
static hda_nid_t out_nids[] = {
0x10, 0x11, 0
};
......@@ -788,6 +788,7 @@ static void add_cx5051_fake_mutes(struct hda_codec *codec)
snd_hda_override_amp_caps(codec, *p, HDA_OUTPUT,
AC_AMPCAP_MIN_MUTE |
query_amp_caps(codec, *p, HDA_OUTPUT));
spec->gen.dac_min_mute = true;
}
static int patch_conexant_auto(struct hda_codec *codec)
......@@ -860,11 +861,6 @@ static int patch_conexant_auto(struct hda_codec *codec)
if (err < 0)
goto error;
if (codec->vendor_id == 0x14f15051) {
/* minimum value is actually mute */
spec->gen.vmaster_tlv[3] |= TLV_DB_SCALE_MUTE;
}
codec->patch_ops = cx_auto_patch_ops;
/* Some laptops with Conexant chips show stalls in S3 resume,
......
......@@ -32,7 +32,6 @@
#include <linux/module.h>
#include <sound/core.h>
#include <sound/jack.h>
#include <sound/tlv.h>
#include "hda_codec.h"
#include "hda_local.h"
#include "hda_auto_parser.h"
......@@ -4227,9 +4226,6 @@ static int stac_parse_auto_config(struct hda_codec *codec)
if (err < 0)
return err;
/* minimum value is actually mute */
spec->gen.vmaster_tlv[3] |= TLV_DB_SCALE_MUTE;
/* setup analog beep controls */
if (spec->anabeep_nid > 0) {
err = stac_auto_create_beep_ctls(codec,
......@@ -4413,6 +4409,7 @@ static int alloc_stac_spec(struct hda_codec *codec)
snd_hda_gen_spec_init(&spec->gen);
codec->spec = spec;
codec->no_trigger_sense = 1; /* seems common with STAC/IDT codecs */
spec->gen.dac_min_mute = true;
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment