Commit d8c07e7a authored by Wey-Yi Guy's avatar Wey-Yi Guy Committed by John W. Linville

iwlwifi: Chain Noise Calibration for 6000 series

Adding support of Chain Noise Calibration for 6000 series NICs.
Signed-off-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: default avatarReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 2b396a12
......@@ -165,6 +165,7 @@ struct iwl_cfg iwl1000_bgn_cfg = {
.shadow_ram_support = false,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl1000_bg_cfg = {
......@@ -185,5 +186,6 @@ struct iwl_cfg iwl1000_bg_cfg = {
.shadow_ram_support = false,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
......@@ -495,14 +495,15 @@ static void iwl4965_chain_noise_reset(struct iwl_priv *priv)
static void iwl4965_gain_computation(struct iwl_priv *priv,
u32 *average_noise,
u16 min_average_noise_antenna_i,
u32 min_average_noise)
u32 min_average_noise,
u8 default_chain)
{
int i, ret;
struct iwl_chain_noise_data *data = &priv->chain_noise_data;
data->delta_gain_code[min_average_noise_antenna_i] = 0;
for (i = 0; i < NUM_RX_CHAINS; i++) {
for (i = default_chain; i < NUM_RX_CHAINS; i++) {
s32 delta_g = 0;
if (!(data->disconn_array[i]) &&
......@@ -2356,6 +2357,7 @@ struct iwl_cfg iwl4965_agn_cfg = {
.ht_greenfield_support = false,
.broken_powersave = true,
.led_compensation = 61,
.chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS,
};
/* Module firmware */
......
......@@ -301,14 +301,17 @@ u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv)
static void iwl5000_gain_computation(struct iwl_priv *priv,
u32 average_noise[NUM_RX_CHAINS],
u16 min_average_noise_antenna_i,
u32 min_average_noise)
u32 min_average_noise,
u8 default_chain)
{
int i;
s32 delta_g;
struct iwl_chain_noise_data *data = &priv->chain_noise_data;
/* Find Gain Code for the antennas B and C */
for (i = 1; i < NUM_RX_CHAINS; i++) {
/*
* Find Gain Code for the chains based on "default chain"
*/
for (i = default_chain + 1; i < NUM_RX_CHAINS; i++) {
if ((data->disconn_array[i])) {
data->delta_gain_code[i] = 0;
continue;
......@@ -1676,6 +1679,7 @@ struct iwl_cfg iwl5300_agn_cfg = {
.need_pll_cfg = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl5100_bg_cfg = {
......@@ -1694,6 +1698,7 @@ struct iwl_cfg iwl5100_bg_cfg = {
.need_pll_cfg = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl5100_abg_cfg = {
......@@ -1712,6 +1717,7 @@ struct iwl_cfg iwl5100_abg_cfg = {
.need_pll_cfg = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl5100_agn_cfg = {
......@@ -1730,6 +1736,7 @@ struct iwl_cfg iwl5100_agn_cfg = {
.need_pll_cfg = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl5350_agn_cfg = {
......@@ -1748,6 +1755,7 @@ struct iwl_cfg iwl5350_agn_cfg = {
.need_pll_cfg = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl5150_agn_cfg = {
......@@ -1766,6 +1774,7 @@ struct iwl_cfg iwl5150_agn_cfg = {
.need_pll_cfg = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
......
......@@ -222,18 +222,11 @@ static struct iwl_lib_ops iwl6000_lib = {
},
};
static struct iwl_hcmd_utils_ops iwl6000_hcmd_utils = {
.get_hcmd_size = iwl5000_get_hcmd_size,
.build_addsta_hcmd = iwl5000_build_addsta_hcmd,
.rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag,
.calc_rssi = iwl5000_calc_rssi,
};
static struct iwl_ops iwl6000_ops = {
.ucode = &iwl5000_ucode,
.lib = &iwl6000_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl6000_hcmd_utils,
.utils = &iwl5000_hcmd_utils,
};
......@@ -260,6 +253,7 @@ struct iwl_cfg iwl6000h_2agn_cfg = {
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl6000h_2abg_cfg = {
......@@ -281,6 +275,7 @@ struct iwl_cfg iwl6000h_2abg_cfg = {
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl6000h_2bg_cfg = {
......@@ -302,6 +297,7 @@ struct iwl_cfg iwl6000h_2bg_cfg = {
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
/*
......@@ -327,6 +323,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = {
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
......@@ -348,6 +345,7 @@ struct iwl_cfg iwl6000i_2abg_cfg = {
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl6000i_2bg_cfg = {
......@@ -369,6 +367,7 @@ struct iwl_cfg iwl6000i_2bg_cfg = {
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl6050_2agn_cfg = {
......@@ -391,6 +390,7 @@ struct iwl_cfg iwl6050_2agn_cfg = {
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl6050_2abg_cfg = {
......@@ -412,6 +412,7 @@ struct iwl_cfg iwl6050_2abg_cfg = {
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl6000_3agn_cfg = {
......@@ -434,6 +435,7 @@ struct iwl_cfg iwl6000_3agn_cfg = {
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
struct iwl_cfg iwl6050_3agn_cfg = {
......@@ -456,6 +458,7 @@ struct iwl_cfg iwl6050_3agn_cfg = {
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
......
......@@ -643,6 +643,15 @@ void iwl_sensitivity_calibration(struct iwl_priv *priv,
}
EXPORT_SYMBOL(iwl_sensitivity_calibration);
static inline u8 find_first_chain(u8 mask)
{
if (mask & ANT_A)
return CHAIN_A;
if (mask & ANT_B)
return CHAIN_B;
return CHAIN_C;
}
/*
* Accumulate 20 beacons of signal and noise statistics for each of
* 3 receivers/antennas/rx-chains, then figure out:
......@@ -675,14 +684,17 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv,
u8 num_tx_chains;
unsigned long flags;
struct statistics_rx_non_phy *rx_info = &(stat_resp->rx.general);
u8 first_chain;
if (priv->disable_chain_noise_cal)
return;
data = &(priv->chain_noise_data);
/* Accumulate just the first 20 beacons after the first association,
* then we're done forever. */
/*
* Accumulate just the first "chain_noise_num_beacons" after
* the first association, then we're done forever.
*/
if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) {
if (data->state == IWL_CHAIN_NOISE_ALIVE)
IWL_DEBUG_CALIB(priv, "Wait for noise calib reset\n");
......@@ -710,7 +722,10 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv,
return;
}
/* Accumulate beacon statistics values across 20 beacons */
/*
* Accumulate beacon statistics values across
* "chain_noise_num_beacons"
*/
chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) &
IN_BAND_FILTER;
chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) &
......@@ -741,16 +756,19 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv,
IWL_DEBUG_CALIB(priv, "chain_noise: a %d b %d c %d\n",
chain_noise_a, chain_noise_b, chain_noise_c);
/* If this is the 20th beacon, determine:
/* If this is the "chain_noise_num_beacons", determine:
* 1) Disconnected antennas (using signal strengths)
* 2) Differential gain (using silence noise) to balance receivers */
if (data->beacon_count != CAL_NUM_OF_BEACONS)
if (data->beacon_count != priv->cfg->chain_noise_num_beacons)
return;
/* Analyze signal for disconnected antenna */
average_sig[0] = (data->chain_signal_a) / CAL_NUM_OF_BEACONS;
average_sig[1] = (data->chain_signal_b) / CAL_NUM_OF_BEACONS;
average_sig[2] = (data->chain_signal_c) / CAL_NUM_OF_BEACONS;
average_sig[0] =
(data->chain_signal_a) / priv->cfg->chain_noise_num_beacons;
average_sig[1] =
(data->chain_signal_b) / priv->cfg->chain_noise_num_beacons;
average_sig[2] =
(data->chain_signal_c) / priv->cfg->chain_noise_num_beacons;
if (average_sig[0] >= average_sig[1]) {
max_average_sig = average_sig[0];
......@@ -803,13 +821,17 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv,
/* there is a Tx antenna connected */
break;
if (num_tx_chains == priv->hw_params.tx_chains_num &&
data->disconn_array[i]) {
/* This is the last TX antenna and is also
* disconnected connect it anyway */
data->disconn_array[i] = 0;
active_chains |= ant_msk;
IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected W/A - "
"declare %d as connected\n", i);
data->disconn_array[i]) {
/*
* If all chains are disconnected
* connect the first valid tx chain
*/
first_chain =
find_first_chain(priv->cfg->valid_tx_ant);
data->disconn_array[first_chain] = 0;
active_chains |= BIT(first_chain);
IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected W/A - declare %d as connected\n",
first_chain);
break;
}
}
......@@ -820,9 +842,12 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv,
active_chains);
/* Analyze noise for rx balance */
average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS);
average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS);
average_noise[2] = ((data->chain_noise_c)/CAL_NUM_OF_BEACONS);
average_noise[0] =
((data->chain_noise_a) / priv->cfg->chain_noise_num_beacons);
average_noise[1] =
((data->chain_noise_b) / priv->cfg->chain_noise_num_beacons);
average_noise[2] =
((data->chain_noise_c) / priv->cfg->chain_noise_num_beacons);
for (i = 0; i < NUM_RX_CHAINS; i++) {
if (!(data->disconn_array[i]) &&
......@@ -843,7 +868,8 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv,
if (priv->cfg->ops->utils->gain_computation)
priv->cfg->ops->utils->gain_computation(priv, average_noise,
min_average_noise_antenna_i, min_average_noise);
min_average_noise_antenna_i, min_average_noise,
find_first_chain(priv->cfg->valid_rx_ant));
/* Some power changes may have been made during the calibration.
* Update and commit the RXON
......
......@@ -98,7 +98,8 @@ struct iwl_hcmd_utils_ops {
void (*gain_computation)(struct iwl_priv *priv,
u32 *average_noise,
u16 min_average_noise_antennat_i,
u32 min_average_noise);
u32 min_average_noise,
u8 default_chain);
void (*chain_noise_reset)(struct iwl_priv *priv);
void (*rts_tx_cmd_flag)(struct ieee80211_tx_info *info,
__le32 *tx_flags);
......@@ -218,6 +219,7 @@ struct iwl_mod_params {
* to the deviation to achieve the desired led frequency.
* The detail algorithm is described in iwl-led.c
* @use_rts_for_ht: use rts/cts protection for HT traffic
* @chain_noise_num_beacons: number of beacons used to compute chain noise
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
......@@ -262,6 +264,7 @@ struct iwl_cfg {
u16 led_compensation;
const bool broken_powersave;
bool use_rts_for_ht;
int chain_noise_num_beacons;
};
/***************************
......
......@@ -743,7 +743,8 @@ struct iwl_dma_ptr {
/* Sensitivity and chain noise calibration */
#define INITIALIZATION_VALUE 0xFFFF
#define CAL_NUM_OF_BEACONS 20
#define IWL4965_CAL_NUM_BEACONS 20
#define IWL_CAL_NUM_BEACONS 16
#define MAXIMUM_ALLOWED_PATHLOSS 15
#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment