[SCSI] lpfc 8.3.2 : Addition of SLI4 Interface - Base Support

Adds new hardware and interface definitions.

Adds new interface routines - utilizing the reorganized layout of the
driver. Adds SLI-4 specific functions for attachment, initialization,
teardown, etc.
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/lpfc/lpfc.h

@@ -105,9 +105,11 @@ struct lpfc_dma_pool {
 };
 
 struct hbq_dmabuf {
+	struct lpfc_dmabuf hbuf;
 	struct lpfc_dmabuf dbuf;
 	uint32_t size;
 	uint32_t tag;
+	struct lpfc_rcqe rcqe;
 };
 
 /* Priority bit.  Set value to exceed low water mark in lpfc_mem. */
@@ -141,7 +143,10 @@ typedef struct lpfc_vpd {
 	} rev;
 	struct {
 #ifdef __BIG_ENDIAN_BITFIELD
-		uint32_t rsvd2  :24;  /* Reserved                             */
+		uint32_t rsvd3  :19;  /* Reserved                             */
+		uint32_t cdss	: 1;  /* Configure Data Security SLI          */
+		uint32_t rsvd2	: 3;  /* Reserved                             */
+		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
@@ -159,7 +164,10 @@ typedef struct lpfc_vpd {
 		uint32_t csah   : 1;  /* Configure Synchronous Abort Handling */
 		uint32_t ccrp   : 1;  /* Config Command Ring Polling          */
 		uint32_t cmv	: 1;  /* Configure Max VPIs                   */
-		uint32_t rsvd2  :24;  /* Reserved                             */
+		uint32_t cbg	: 1;  /* Configure BlockGuard                 */
+		uint32_t rsvd2	: 3;  /* Reserved                             */
+		uint32_t cdss	: 1;  /* Configure Data Security SLI          */
+		uint32_t rsvd3  :19;  /* Reserved                             */
 #endif
 	} sli3Feat;
 } lpfc_vpd_t;
@@ -280,6 +288,9 @@ struct lpfc_vport {
 	enum discovery_state port_state;
 
 	uint16_t vpi;
+	uint16_t vfi;
+	uint8_t vfi_state;
+#define LPFC_VFI_REGISTERED	0x1
 
 	uint32_t fc_flag;	/* FC flags */
 /* Several of these flags are HBA centric and should be moved to
@@ -392,6 +403,9 @@ struct lpfc_vport {
 #endif
 	uint8_t stat_data_enabled;
 	uint8_t stat_data_blocked;
+	struct list_head rcv_buffer_list;
+	uint32_t vport_flag;
+#define STATIC_VPORT	1
 };
 
 struct hbq_s {
@@ -494,6 +508,7 @@ struct lpfc_hba {
 #define LPFC_SLI3_CRP_ENABLED		0x08
 #define LPFC_SLI3_INB_ENABLED		0x10
 #define LPFC_SLI3_BG_ENABLED		0x20
+#define LPFC_SLI3_DSS_ENABLED		0x40
 	uint32_t iocb_cmd_size;
 	uint32_t iocb_rsp_size;
 
@@ -507,8 +522,13 @@ struct lpfc_hba {
 
 	uint32_t hba_flag;	/* hba generic flags */
 #define HBA_ERATT_HANDLED	0x1 /* This flag is set when eratt handled */
-
-#define DEFER_ERATT		0x4 /* Deferred error attention in progress */
+#define DEFER_ERATT		0x2 /* Deferred error attention in progress */
+#define HBA_FCOE_SUPPORT	0x4 /* HBA function supports FCOE */
+#define HBA_RECEIVE_BUFFER	0x8 /* Rcv buffer posted to worker thread */
+#define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
+#define FCP_XRI_ABORT_EVENT	0x20
+#define ELS_XRI_ABORT_EVENT	0x40
+#define ASYNC_EVENT		0x80
 	struct lpfc_dmabuf slim2p;
 
 	MAILBOX_t *mbox;
@@ -567,6 +587,9 @@ struct lpfc_hba {
 	uint32_t cfg_poll;
 	uint32_t cfg_poll_tmo;
 	uint32_t cfg_use_msi;
+	uint32_t cfg_fcp_imax;
+	uint32_t cfg_fcp_wq_count;
+	uint32_t cfg_fcp_eq_count;
 	uint32_t cfg_sg_seg_cnt;
 	uint32_t cfg_prot_sg_seg_cnt;
 	uint32_t cfg_sg_dma_buf_size;
@@ -576,6 +599,8 @@ struct lpfc_hba {
 	uint32_t cfg_enable_hba_reset;
 	uint32_t cfg_enable_hba_heartbeat;
 	uint32_t cfg_enable_bg;
+	uint32_t cfg_enable_fip;
+	uint32_t cfg_log_verbose;
 
 	lpfc_vpd_t vpd;		/* vital product data */
 
@@ -659,7 +684,8 @@ struct lpfc_hba {
 	/* pci_mem_pools */
 	struct pci_pool *lpfc_scsi_dma_buf_pool;
 	struct pci_pool *lpfc_mbuf_pool;
-	struct pci_pool *lpfc_hbq_pool;
+	struct pci_pool *lpfc_hrb_pool;	/* header receive buffer pool */
+	struct pci_pool *lpfc_drb_pool; /* data receive buffer pool */
 	struct lpfc_dma_pool lpfc_mbuf_safety_pool;
 
 	mempool_t *mbox_mem_pool;
@@ -675,6 +701,14 @@ struct lpfc_hba {
 	struct lpfc_vport *pport;	/* physical lpfc_vport pointer */
 	uint16_t max_vpi;		/* Maximum virtual nports */
 #define LPFC_MAX_VPI 0xFFFF		/* Max number of VPI supported */
+	uint16_t max_vports;            /*
+					 * For IOV HBAs max_vpi can change
+					 * after a reset. max_vports is max
+					 * number of vports present. This can
+					 * be greater than max_vpi.
+					 */
+	uint16_t vpi_base;
+	uint16_t vfi_base;
 	unsigned long *vpi_bmask;	/* vpi allocation table */
 
 	/* Data structure used by fabric iocb scheduler */
@@ -733,6 +767,11 @@ struct lpfc_hba {
 /* Maximum number of events that can be outstanding at any time*/
 #define LPFC_MAX_EVT_COUNT 512
 	atomic_t fast_event_count;
+	struct lpfc_fcf fcf;
+	uint8_t fc_map[3];
+	uint8_t valid_vlan;
+	uint16_t vlan_id;
+	struct list_head fcf_conn_rec_list;
 };
 
 static inline struct Scsi_Host *

drivers/scsi/lpfc/lpfc_attr.c

@@ -30,8 +30,10 @@
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -828,18 +830,37 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
 		return 0;
 	}
 
-	if (mrpi)
-		*mrpi = pmb->un.varRdConfig.max_rpi;
-	if (arpi)
-		*arpi = pmb->un.varRdConfig.avail_rpi;
-	if (mxri)
-		*mxri = pmb->un.varRdConfig.max_xri;
-	if (axri)
-		*axri = pmb->un.varRdConfig.avail_xri;
-	if (mvpi)
-		*mvpi = pmb->un.varRdConfig.max_vpi;
-	if (avpi)
-		*avpi = pmb->un.varRdConfig.avail_vpi;
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rd_config = &pmboxq->u.mqe.un.rd_config;
+		if (mrpi)
+			*mrpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+		if (arpi)
+			*arpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.rpi_used;
+		if (mxri)
+			*mxri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+		if (axri)
+			*axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.xri_used;
+		if (mvpi)
+			*mvpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+		if (avpi)
+			*avpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) -
+					phba->sli4_hba.max_cfg_param.vpi_used;
+	} else {
+		if (mrpi)
+			*mrpi = pmb->un.varRdConfig.max_rpi;
+		if (arpi)
+			*arpi = pmb->un.varRdConfig.avail_rpi;
+		if (mxri)
+			*mxri = pmb->un.varRdConfig.max_xri;
+		if (axri)
+			*axri = pmb->un.varRdConfig.avail_xri;
+		if (mvpi)
+			*mvpi = pmb->un.varRdConfig.max_vpi;
+		if (avpi)
+			*avpi = pmb->un.varRdConfig.avail_vpi;
+	}
 
 	mempool_free(pmboxq, phba->mbox_mem_pool);
 	return 1;
@@ -2844,14 +2865,38 @@ LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
 /*
 # lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that
 #		support this feature
-#       0  = MSI disabled
+#       0  = MSI disabled (default)
 #       1  = MSI enabled
-#       2  = MSI-X enabled (default)
-# Value range is [0,2]. Default value is 2.
+#       2  = MSI-X enabled
+# Value range is [0,2]. Default value is 0.
 */
-LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
+LPFC_ATTR_R(use_msi, 0, 0, 2, "Use Message Signaled Interrupts (1) or "
 	    "MSI-X (2), if possible");
 
+/*
+# lpfc_fcp_imax: Set the maximum number of fast-path FCP interrupts per second
+#
+# Value range is [636,651042]. Default value is 10000.
+*/
+LPFC_ATTR_R(fcp_imax, LPFC_FP_DEF_IMAX, LPFC_MIM_IMAX, LPFC_DMULT_CONST,
+	    "Set the maximum number of fast-path FCP interrupts per second");
+
+/*
+# lpfc_fcp_wq_count: Set the number of fast-path FCP work queues
+#
+# Value range is [1,31]. Default value is 4.
+*/
+LPFC_ATTR_R(fcp_wq_count, LPFC_FP_WQN_DEF, LPFC_FP_WQN_MIN, LPFC_FP_WQN_MAX,
+	    "Set the number of fast-path FCP work queues, if possible");
+
+/*
+# lpfc_fcp_eq_count: Set the number of fast-path FCP event queues
+#
+# Value range is [1,7]. Default value is 1.
+*/
+LPFC_ATTR_R(fcp_eq_count, LPFC_FP_EQN_DEF, LPFC_FP_EQN_MIN, LPFC_FP_EQN_MAX,
+	    "Set the number of fast-path FCP event queues, if possible");
+
 /*
 # lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
 #       0  = HBA resets disabled
@@ -2969,6 +3014,9 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_poll,
 	&dev_attr_lpfc_poll_tmo,
 	&dev_attr_lpfc_use_msi,
+	&dev_attr_lpfc_fcp_imax,
+	&dev_attr_lpfc_fcp_wq_count,
+	&dev_attr_lpfc_fcp_eq_count,
 	&dev_attr_lpfc_enable_bg,
 	&dev_attr_lpfc_soft_wwnn,
 	&dev_attr_lpfc_soft_wwpn,
@@ -4105,6 +4153,9 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
 	lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
 	lpfc_use_msi_init(phba, lpfc_use_msi);
+	lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
+	lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count);
+	lpfc_fcp_eq_count_init(phba, lpfc_fcp_eq_count);
 	lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
 	lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
 	lpfc_enable_bg_init(phba, lpfc_enable_bg);

drivers/scsi/lpfc/lpfc_crtn.h

@@ -35,17 +35,19 @@ int lpfc_config_msi(struct lpfc_hba *, LPFC_MBOXQ_t *);
 int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int);
 void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_reg_login(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
-		   LPFC_MBOXQ_t *, uint32_t);
+int lpfc_reg_rpi(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
+		 LPFC_MBOXQ_t *, uint32_t);
 void lpfc_unreg_login(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
 void lpfc_unreg_did(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
-void lpfc_reg_vpi(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
+void lpfc_reg_vpi(struct lpfc_vport *, LPFC_MBOXQ_t *);
 void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *);
 void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
+void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
 
 struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
 void lpfc_cleanup_rpis(struct lpfc_vport *, int);
 int lpfc_linkdown(struct lpfc_hba *);
+void lpfc_linkdown_port(struct lpfc_vport *);
 void lpfc_port_link_failure(struct lpfc_vport *);
 void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
 
@@ -54,6 +56,7 @@ void lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_enqueue_node(struct lpfc_vport *, struct lpfc_nodelist *);
 void lpfc_dequeue_node(struct lpfc_vport *, struct lpfc_nodelist *);
 struct lpfc_nodelist *lpfc_enable_node(struct lpfc_vport *,
@@ -149,15 +152,19 @@ int lpfc_online(struct lpfc_hba *);
 void lpfc_unblock_mgmt_io(struct lpfc_hba *);
 void lpfc_offline_prep(struct lpfc_hba *);
 void lpfc_offline(struct lpfc_hba *);
+void lpfc_reset_hba(struct lpfc_hba *);
 
 int lpfc_sli_setup(struct lpfc_hba *);
 int lpfc_sli_queue_setup(struct lpfc_hba *);
 
 void lpfc_handle_eratt(struct lpfc_hba *);
 void lpfc_handle_latt(struct lpfc_hba *);
-irqreturn_t lpfc_intr_handler(int, void *);
-irqreturn_t lpfc_sp_intr_handler(int, void *);
-irqreturn_t lpfc_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_intr_handler(int, void *);
+irqreturn_t lpfc_sli_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_fp_intr_handler(int, void *);
 
 void lpfc_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_config_ring(struct lpfc_hba *, int, LPFC_MBOXQ_t *);
@@ -165,16 +172,32 @@ void lpfc_config_port(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *);
+void __lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_cmd_check(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_dev_check(struct lpfc_hba *);
 int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
+void lpfc_init_vfi(struct lpfcMboxq *, struct lpfc_vport *);
+void lpfc_reg_vfi(struct lpfcMboxq *, struct lpfc_vport *, dma_addr_t);
+void lpfc_init_vpi(struct lpfcMboxq *, uint16_t);
+void lpfc_unreg_vfi(struct lpfcMboxq *, uint16_t);
+void lpfc_reg_fcfi(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_unreg_fcfi(struct lpfcMboxq *, uint16_t);
+void lpfc_resume_rpi(struct lpfcMboxq *, struct lpfc_nodelist *);
 
 void lpfc_config_hbq(struct lpfc_hba *, uint32_t, struct lpfc_hbq_init *,
 	uint32_t , LPFC_MBOXQ_t *);
 struct hbq_dmabuf *lpfc_els_hbq_alloc(struct lpfc_hba *);
 void lpfc_els_hbq_free(struct lpfc_hba *, struct hbq_dmabuf *);
+struct hbq_dmabuf *lpfc_sli4_rb_alloc(struct lpfc_hba *);
+void lpfc_sli4_rb_free(struct lpfc_hba *, struct hbq_dmabuf *);
+void lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *, struct fcf_record *,
+			uint16_t);
+void lpfc_unregister_unused_fcf(struct lpfc_hba *);
 
-int lpfc_mem_alloc(struct lpfc_hba *);
+int lpfc_mem_alloc(struct lpfc_hba *, int align);
 void lpfc_mem_free(struct lpfc_hba *);
+void lpfc_mem_free_all(struct lpfc_hba *);
 void lpfc_stop_vport_timers(struct lpfc_vport *);
 
 void lpfc_poll_timeout(unsigned long ptr);
@@ -198,12 +221,13 @@ int lpfc_sli_host_down(struct lpfc_vport *);
 int lpfc_sli_hba_down(struct lpfc_hba *);
 int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 int lpfc_sli_handle_mb_event(struct lpfc_hba *);
-int lpfc_sli_flush_mbox_queue(struct lpfc_hba *);
+void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *);
 int lpfc_sli_check_eratt(struct lpfc_hba *);
-int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
+void lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
 				    struct lpfc_sli_ring *, uint32_t);
+int lpfc_sli4_handle_received_buffer(struct lpfc_hba *);
 void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_sli_issue_iocb(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
 			struct lpfc_iocbq *, uint32_t);
 void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t);
 void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *);
@@ -237,7 +261,7 @@ struct lpfc_nodelist *lpfc_findnode_wwpn(struct lpfc_vport *,
 
 int lpfc_sli_issue_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 
-int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, uint32_t,
 			     struct lpfc_iocbq *, struct lpfc_iocbq *,
 			     uint32_t);
 void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *, struct lpfc_iocbq *,
@@ -254,6 +278,12 @@ void lpfc_in_buf_free(struct lpfc_hba *, struct lpfc_dmabuf *);
 const char* lpfc_info(struct Scsi_Host *);
 int lpfc_scan_finished(struct Scsi_Host *, unsigned long);
 
+int lpfc_init_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_sli_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_scsi_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_mbox_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_api_table_setup(struct lpfc_hba *, uint8_t);
+
 void lpfc_get_cfgparam(struct lpfc_hba *);
 void lpfc_get_vport_cfgparam(struct lpfc_vport *);
 int lpfc_alloc_sysfs_attr(struct lpfc_vport *);
@@ -314,8 +344,15 @@ lpfc_send_els_failure_event(struct lpfc_hba *, struct lpfc_iocbq *,
 				struct lpfc_iocbq *);
 struct lpfc_fast_path_event *lpfc_alloc_fast_evt(struct lpfc_hba *);
 void lpfc_free_fast_evt(struct lpfc_hba *, struct lpfc_fast_path_event *);
+void lpfc_create_static_vport(struct lpfc_hba *);
+void lpfc_stop_hba_timers(struct lpfc_hba *);
+void lpfc_stop_port(struct lpfc_hba *);
+void lpfc_parse_fcoe_conf(struct lpfc_hba *, uint8_t *, uint32_t);
+int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
+void lpfc_start_fdiscs(struct lpfc_hba *phba);
 
 #define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
 #define HBA_EVENT_RSCN                   5
 #define HBA_EVENT_LINK_UP                2
 #define HBA_EVENT_LINK_DOWN              3
+

drivers/scsi/lpfc/lpfc_ct.c

@@ -32,8 +32,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"

drivers/scsi/lpfc/lpfc_debugfs.c

@@ -33,8 +33,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"

drivers/scsi/lpfc/lpfc_els.c

@@ -28,8 +28,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -220,7 +222,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp,
 		icmd->un.elsreq64.myID = vport->fc_myDID;
 
 		/* For ELS_REQUEST64_CR, use the VPI by default */
-		icmd->ulpContext = vport->vpi;
+		icmd->ulpContext = vport->vpi + phba->vpi_base;
 		icmd->ulpCt_h = 0;
 		/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
 		if (elscmd == ELS_CMD_ECHO)

drivers/scsi/lpfc/lpfc_hbadisc.c

@@ -29,10 +29,12 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_scsi.h"
 #include "lpfc.h"
 #include "lpfc_logmsg.h"
@@ -491,6 +493,10 @@ lpfc_work_done(struct lpfc_hba *phba)
 	phba->work_ha = 0;
 	spin_unlock_irq(&phba->hbalock);
 
+	/* First, try to post the next mailbox command to SLI4 device */
+	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
+		lpfc_sli4_post_async_mbox(phba);
+
 	if (ha_copy & HA_ERATT)
 		/* Handle the error attention event */
 		lpfc_handle_eratt(phba);
@@ -501,9 +507,27 @@ lpfc_work_done(struct lpfc_hba *phba)
 	if (ha_copy & HA_LATT)
 		lpfc_handle_latt(phba);
 
+	/* Process SLI4 events */
+	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
+		if (phba->hba_flag & FCP_XRI_ABORT_EVENT)
+			lpfc_sli4_fcp_xri_abort_event_proc(phba);
+		if (phba->hba_flag & ELS_XRI_ABORT_EVENT)
+			lpfc_sli4_els_xri_abort_event_proc(phba);
+		if (phba->hba_flag & ASYNC_EVENT)
+			lpfc_sli4_async_event_proc(phba);
+		if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) {
+			spin_lock_irq(&phba->hbalock);
+			phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER;
+			spin_unlock_irq(&phba->hbalock);
+			lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
+		}
+		if (phba->hba_flag & HBA_RECEIVE_BUFFER)
+			lpfc_sli4_handle_received_buffer(phba);
+	}
+
 	vports = lpfc_create_vport_work_array(phba);
 	if (vports != NULL)
-		for(i = 0; i <= phba->max_vpi; i++) {
+		for (i = 0; i <= phba->max_vports; i++) {
 			/*
 			 * We could have no vports in array if unloading, so if
 			 * this happens then just use the pport
@@ -2556,7 +2580,8 @@ lpfc_issue_clear_la(struct lpfc_hba *phba, struct lpfc_vport *vport)
 	 * clear_la then don't send it.
 	 */
 	if ((phba->link_state >= LPFC_CLEAR_LA) ||
-	    (vport->port_type != LPFC_PHYSICAL_PORT))
+	    (vport->port_type != LPFC_PHYSICAL_PORT) ||
+		(phba->sli_rev == LPFC_SLI_REV4))
 		return;
 
 			/* Link up discovery */
@@ -2585,7 +2610,7 @@ lpfc_issue_reg_vpi(struct lpfc_hba *phba, struct lpfc_vport *vport)
 
 	regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (regvpimbox) {
-		lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, regvpimbox);
+		lpfc_reg_vpi(vport, regvpimbox);
 		regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi;
 		regvpimbox->vport = vport;
 		if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT)
@@ -2645,7 +2670,8 @@ lpfc_disc_start(struct lpfc_vport *vport)
 	 */
 	if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
 	    !(vport->fc_flag & FC_PT2PT) &&
-	    !(vport->fc_flag & FC_RSCN_MODE)) {
+	    !(vport->fc_flag & FC_RSCN_MODE) &&
+	    (phba->sli_rev < LPFC_SLI_REV4)) {
 		lpfc_issue_reg_vpi(phba, vport);
 		return;
 	}

drivers/scsi/lpfc/lpfc_hw.h

@@ -470,6 +470,35 @@ struct serv_parm {	/* Structure is in Big Endian format */
 	uint8_t vendorVersion[16];
 };
 
+/*
+ * Virtual Fabric Tagging Header
+ */
+struct fc_vft_header {
+	 uint32_t word0;
+#define fc_vft_hdr_r_ctl_SHIFT		24
+#define fc_vft_hdr_r_ctl_MASK		0xFF
+#define fc_vft_hdr_r_ctl_WORD		word0
+#define fc_vft_hdr_ver_SHIFT		22
+#define fc_vft_hdr_ver_MASK		0x3
+#define fc_vft_hdr_ver_WORD		word0
+#define fc_vft_hdr_type_SHIFT		18
+#define fc_vft_hdr_type_MASK		0xF
+#define fc_vft_hdr_type_WORD		word0
+#define fc_vft_hdr_e_SHIFT		16
+#define fc_vft_hdr_e_MASK		0x1
+#define fc_vft_hdr_e_WORD		word0
+#define fc_vft_hdr_priority_SHIFT	13
+#define fc_vft_hdr_priority_MASK	0x7
+#define fc_vft_hdr_priority_WORD	word0
+#define fc_vft_hdr_vf_id_SHIFT		1
+#define fc_vft_hdr_vf_id_MASK		0xFFF
+#define fc_vft_hdr_vf_id_WORD		word0
+	uint32_t word1;
+#define fc_vft_hdr_hopct_SHIFT		24
+#define fc_vft_hdr_hopct_MASK		0xFF
+#define fc_vft_hdr_hopct_WORD		word1
+};
+
 /*
  *  Extended Link Service LS_COMMAND codes (Payload Word 0)
  */
@@ -1152,6 +1181,9 @@ typedef struct {
 #define PCI_DEVICE_ID_HORNET        0xfe05
 #define PCI_DEVICE_ID_ZEPHYR_SCSP   0xfe11
 #define PCI_DEVICE_ID_ZEPHYR_DCSP   0xfe12
+#define PCI_VENDOR_ID_SERVERENGINE  0x19a2
+#define PCI_DEVICE_ID_TIGERSHARK    0x0704
+#define PCI_DEVICE_ID_TIGERSHARK_S  0x0705
 
 #define JEDEC_ID_ADDRESS            0x0080001c
 #define FIREFLY_JEDEC_ID            0x1ACC
@@ -1342,15 +1374,21 @@ typedef struct {		/* FireFly BIU registers */
 #define MBX_READ_LA64       0x95
 #define MBX_REG_VPI	    0x96
 #define MBX_UNREG_VPI	    0x97
-#define MBX_REG_VNPID	    0x96
-#define MBX_UNREG_VNPID	    0x97
 
 #define MBX_WRITE_WWN       0x98
 #define MBX_SET_DEBUG       0x99
 #define MBX_LOAD_EXP_ROM    0x9C
-
-#define MBX_MAX_CMDS        0x9D
+#define MBX_SLI4_CONFIG	    0x9B
+#define MBX_SLI4_REQ_FTRS   0x9D
+#define MBX_MAX_CMDS        0x9E
+#define MBX_RESUME_RPI      0x9E
 #define MBX_SLI2_CMD_MASK   0x80
+#define MBX_REG_VFI         0x9F
+#define MBX_REG_FCFI        0xA0
+#define MBX_UNREG_VFI       0xA1
+#define MBX_UNREG_FCFI	    0xA2
+#define MBX_INIT_VFI        0xA3
+#define MBX_INIT_VPI        0xA4
 
 /* IOCB Commands */
 
@@ -1440,6 +1478,16 @@ typedef struct {		/* FireFly BIU registers */
 #define CMD_IOCB_LOGENTRY_CN		0x94
 #define CMD_IOCB_LOGENTRY_ASYNC_CN	0x96
 
+/* Unhandled Data Security SLI Commands */
+#define DSSCMD_IWRITE64_CR 		0xD8
+#define DSSCMD_IWRITE64_CX		0xD9
+#define DSSCMD_IREAD64_CR		0xDA
+#define DSSCMD_IREAD64_CX		0xDB
+#define DSSCMD_INVALIDATE_DEK		0xDC
+#define DSSCMD_SET_KEK			0xDD
+#define DSSCMD_GET_KEK_ID		0xDE
+#define DSSCMD_GEN_XFER			0xDF
+
 #define CMD_MAX_IOCB_CMD        0xE6
 #define CMD_IOCB_MASK           0xff
 
@@ -1466,6 +1514,7 @@ typedef struct {		/* FireFly BIU registers */
 #define MBXERR_BAD_RCV_LENGTH       14
 #define MBXERR_DMA_ERROR            15
 #define MBXERR_ERROR                16
+#define MBXERR_LINK_DOWN            0x33
 #define MBX_NOT_FINISHED           255
 
 #define MBX_BUSY                   0xffffff /* Attempted cmd to busy Mailbox */
@@ -1504,32 +1553,6 @@ struct ulp_bde {
 #endif
 };
 
-struct ulp_bde64 {	/* SLI-2 */
-	union ULP_BDE_TUS {
-		uint32_t w;
-		struct {
-#ifdef __BIG_ENDIAN_BITFIELD
-			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
-						   VALUE !! */
-			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
-#else	/*  __LITTLE_ENDIAN_BITFIELD */
-			uint32_t bdeSize:24;	/* Size of buffer (in bytes) */
-			uint32_t bdeFlags:8;	/* BDE Flags 0 IS A SUPPORTED
-						   VALUE !! */
-#endif
-#define BUFF_TYPE_BDE_64    0x00	/* BDE (Host_resident) */
-#define BUFF_TYPE_BDE_IMMED 0x01	/* Immediate Data BDE */
-#define BUFF_TYPE_BDE_64P   0x02	/* BDE (Port-resident) */
-#define BUFF_TYPE_BDE_64I   0x08	/* Input BDE (Host-resident) */
-#define BUFF_TYPE_BDE_64IP  0x0A	/* Input BDE (Port-resident) */
-#define BUFF_TYPE_BLP_64    0x40	/* BLP (Host-resident) */
-#define BUFF_TYPE_BLP_64P   0x42	/* BLP (Port-resident) */
-		} f;
-	} tus;
-	uint32_t addrLow;
-	uint32_t addrHigh;
-};
-
 typedef struct ULP_BDL {	/* SLI-2 */
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t bdeFlags:8;	/* BDL Flags */
@@ -2287,7 +2310,7 @@ typedef struct {
 	uint32_t rsvd3;
 	uint32_t rsvd4;
 	uint32_t rsvd5;
-	uint16_t rsvd6;
+	uint16_t vfi;
 	uint16_t vpi;
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t rsvd1;
@@ -2297,7 +2320,7 @@ typedef struct {
 	uint32_t rsvd4;
 	uint32_t rsvd5;
 	uint16_t vpi;
-	uint16_t rsvd6;
+	uint16_t vfi;
 #endif
 } REG_VPI_VAR;
 
@@ -2457,7 +2480,7 @@ typedef struct {
 	uint32_t entry_index:16;
 #endif
 
-	uint32_t rsvd1;
+	uint32_t sli4_length;
 	uint32_t word_cnt;
 	uint32_t resp_offset;
 } DUMP_VAR;
@@ -2470,9 +2493,32 @@ typedef struct {
 #define  DMP_RSP_OFFSET          0x14   /* word 5 contains first word of rsp */
 #define  DMP_RSP_SIZE            0x6C   /* maximum of 27 words of rsp data */
 
+#define  DMP_REGION_VPORT	 0x16   /* VPort info region */
+#define  DMP_VPORT_REGION_SIZE	 0x200
+#define  DMP_MBOX_OFFSET_WORD	 0x5
+
+#define  DMP_REGION_FCOEPARAM	 0x17   /* fcoe param region */
+#define  DMP_FCOEPARAM_RGN_SIZE	 0x400
+
 #define  WAKE_UP_PARMS_REGION_ID    4
 #define  WAKE_UP_PARMS_WORD_SIZE   15
 
+struct vport_rec {
+	uint8_t wwpn[8];
+	uint8_t wwnn[8];
+};
+
+#define VPORT_INFO_SIG 0x32324752
+#define VPORT_INFO_REV_MASK 0xff
+#define VPORT_INFO_REV 0x1
+#define MAX_STATIC_VPORT_COUNT 16
+struct static_vport_info {
+	uint32_t 		signature;
+	uint32_t		rev;
+	struct vport_rec 	vport_list[MAX_STATIC_VPORT_COUNT];
+	uint32_t		resvd[66];
+};
+
 /* Option rom version structure */
 struct prog_id {
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -2697,7 +2743,9 @@ typedef struct {
 #endif
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd1     : 23;  /* Reserved                             */
+	uint32_t rsvd1     : 19;  /* Reserved                             */
+	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd2     :  3;  /* Reserved                             */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
 	uint32_t cmv       :  1;  /* Configure Max VPIs                   */
 	uint32_t ccrp      :  1;  /* Config Command Ring Polling          */
@@ -2717,10 +2765,14 @@ typedef struct {
 	uint32_t ccrp      :  1;  /* Config Command Ring Polling          */
 	uint32_t cmv	   :  1;  /* Configure Max VPIs                   */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
-	uint32_t rsvd1     : 23;  /* Reserved                             */
+	uint32_t rsvd2     :  3;  /* Reserved                             */
+	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd1     : 19;  /* Reserved                             */
 #endif
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd2     : 23;  /* Reserved                             */
+	uint32_t rsvd3     : 19;  /* Reserved                             */
+	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd4     :  3;  /* Reserved                             */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
 	uint32_t gmv	   :  1;  /* Grant Max VPIs                       */
 	uint32_t gcrp	   :  1;  /* Grant Command Ring Polling           */
@@ -2740,7 +2792,9 @@ typedef struct {
 	uint32_t gcrp	   :  1;  /* Grant Command Ring Polling           */
 	uint32_t gmv	   :  1;  /* Grant Max VPIs                       */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
-	uint32_t rsvd2     : 23;  /* Reserved                             */
+	uint32_t rsvd4     :  3;  /* Reserved                             */
+	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
+	uint32_t rsvd3     : 19;  /* Reserved                             */
 #endif
 
 #ifdef __BIG_ENDIAN_BITFIELD
@@ -2753,20 +2807,20 @@ typedef struct {
 
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t max_hbq   : 16;  /* Max HBQs Host expect to configure    */
-	uint32_t rsvd3     : 16;  /* Max HBQs Host expect to configure    */
+	uint32_t rsvd5     : 16;  /* Max HBQs Host expect to configure    */
 #else	/*  __LITTLE_ENDIAN */
-	uint32_t rsvd3     : 16;  /* Max HBQs Host expect to configure    */
+	uint32_t rsvd5     : 16;  /* Max HBQs Host expect to configure    */
 	uint32_t max_hbq   : 16;  /* Max HBQs Host expect to configure    */
 #endif
 
-	uint32_t rsvd4;           /* Reserved                             */
+	uint32_t rsvd6;           /* Reserved                             */
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd5      : 16;  /* Reserved                             */
+	uint32_t rsvd7      : 16;  /* Reserved                             */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
-	uint32_t rsvd5      : 16;  /* Reserved                             */
+	uint32_t rsvd7      : 16;  /* Reserved                             */
 #endif
 
 } CONFIG_PORT_VAR;
@@ -3666,3 +3720,5 @@ lpfc_error_lost_link(IOCB_t *iocbp)
 #define MENLO_TIMEOUT 30
 #define SETVAR_MLOMNT 0x103107
 #define SETVAR_MLORST 0x103007
+
+#define BPL_ALIGN_SZ 8 /* 8 byte alignment for bpl and mbufs */

drivers/scsi/lpfc/lpfc_mbox.c

@@ -28,8 +28,10 @@
 
 #include <scsi/scsi.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"

drivers/scsi/lpfc/lpfc_nportdisc.c

@@ -28,8 +28,10 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"

drivers/scsi/lpfc/lpfc_scsi.h

@@ -140,6 +140,8 @@ struct lpfc_scsi_buf {
 	struct fcp_rsp *fcp_rsp;
 	struct ulp_bde64 *fcp_bpl;
 
+	dma_addr_t dma_phys_bpl;
+
 	/* cur_iocbq has phys of the dma-able buffer.
 	 * Iotag is in here
 	 */

drivers/scsi/lpfc/lpfc_sli.h

@@ -29,13 +29,23 @@ typedef enum _lpfc_ctx_cmd {
 	LPFC_CTX_HOST
 } lpfc_ctx_cmd;
 
+/* This structure is used to carry the needed response IOCB states */
+struct lpfc_sli4_rspiocb_info {
+	uint8_t hw_status;
+	uint8_t bfield;
+#define LPFC_XB	0x1
+#define LPFC_PV	0x2
+	uint8_t priority;
+	uint8_t reserved;
+};
+
 /* This structure is used to handle IOCB requests / responses */
 struct lpfc_iocbq {
 	/* lpfc_iocbqs are used in double linked lists */
 	struct list_head list;
 	struct list_head clist;
 	uint16_t iotag;         /* pre-assigned IO tag */
-	uint16_t rsvd1;
+	uint16_t sli4_xritag;   /* pre-assigned XRI, (OXID) tag. */
 
 	IOCB_t iocb;		/* IOCB cmd */
 	uint8_t retry;		/* retry counter for IOCB cmd - if needed */
@@ -65,7 +75,7 @@ struct lpfc_iocbq {
 			   struct lpfc_iocbq *);
 	void (*iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
 			   struct lpfc_iocbq *);
-
+	struct lpfc_sli4_rspiocb_info sli4_info;
 };
 
 #define SLI_IOCB_RET_IOCB      1	/* Return IOCB if cmd ring full */
@@ -81,14 +91,18 @@ struct lpfc_iocbq {
 typedef struct lpfcMboxq {
 	/* MBOXQs are used in single linked lists */
 	struct list_head list;	/* ptr to next mailbox command */
-	MAILBOX_t mb;		/* Mailbox cmd */
-	struct lpfc_vport *vport;/* virutal port pointer */
+	union {
+		MAILBOX_t mb;		/* Mailbox cmd */
+		struct lpfc_mqe mqe;
+	} u;
+	struct lpfc_vport *vport;/* virtual port pointer */
 	void *context1;		/* caller context information */
 	void *context2;		/* caller context information */
 
 	void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *);
 	uint8_t mbox_flag;
-
+	struct lpfc_mcqe mcqe;
+	struct lpfc_mbx_nembed_sge_virt *sge_array;
 } LPFC_MBOXQ_t;
 
 #define MBX_POLL        1	/* poll mailbox till command done, then
@@ -234,6 +248,7 @@ struct lpfc_sli {
 #define LPFC_PROCESS_LA           0x400	/* Able to process link attention */
 #define LPFC_BLOCK_MGMT_IO        0x800	/* Don't allow mgmt mbx or iocb cmds */
 #define LPFC_MENLO_MAINT          0x1000 /* need for menl fw download */
+#define LPFC_SLI_ASYNC_MBX_BLK    0x2000 /* Async mailbox is blocked */
 
 	struct lpfc_sli_ring ring[LPFC_MAX_RING];
 	int fcp_ring;		/* ring used for FCP initiator commands */
@@ -261,6 +276,8 @@ struct lpfc_sli {
 
 #define LPFC_MBOX_TMO           30	/* Sec tmo for outstanding mbox
 					   command */
+#define LPFC_MBOX_SLI4_CONFIG_TMO 60	/* Sec tmo for outstanding mbox
+					   command */
 #define LPFC_MBOX_TMO_FLASH_CMD 300     /* Sec tmo for outstanding FLASH write
 					 * or erase cmds. This is especially
 					 * long because of the potential of

drivers/scsi/lpfc/lpfc_vport.c

@@ -32,8 +32,10 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
 #include "lpfc_hw.h"
 #include "lpfc_sli.h"
+#include "lpfc_sli4.h"
 #include "lpfc_nl.h"
 #include "lpfc_disc.h"
 #include "lpfc_scsi.h"
@@ -89,6 +91,8 @@ lpfc_alloc_vpi(struct lpfc_hba *phba)
 		vpi = 0;
 	else
 		set_bit(vpi, phba->vpi_bmask);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->sli4_hba.max_cfg_param.vpi_used++;
 	spin_unlock_irq(&phba->hbalock);
 	return vpi;
 }
@@ -96,8 +100,12 @@ lpfc_alloc_vpi(struct lpfc_hba *phba)
 static void
 lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
 {
+	if (vpi == 0)
+		return;
 	spin_lock_irq(&phba->hbalock);
 	clear_bit(vpi, phba->vpi_bmask);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		phba->sli4_hba.max_cfg_param.vpi_used--;
 	spin_unlock_irq(&phba->hbalock);
 }
 
@@ -308,6 +316,21 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
 		goto error_out;
 	}
 
+	/*
+	 * In SLI4, the vpi must be activated before it can be used
+	 * by the port.
+	 */
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		rc = lpfc_sli4_init_vpi(phba, vpi);
+		if (rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+					"1838 Failed to INIT_VPI on vpi %d "
+					"status %d\n", vpi, rc);
+			rc = VPORT_NORESOURCES;
+			lpfc_free_vpi(phba, vpi);
+			goto error_out;
+		}
+	}
 
 	/* Assign an unused board number */
 	if ((instance = lpfc_get_instance()) < 0) {