Merge tag 'extcon-next-for-3.12' of...

Merge tag 'extcon-next-for-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for 3.12

This patchset add new file for OF helper API and modify small fix of extcon-palmas
driver. Also, extcon core dirver use power_efficient_wq instead of system_wq.

Detailed description for patchset:
1. Add new file for OF helper API
- Add OF(OpenFirmware) Helper API which is of_extcon_get_extcon_device().
  This helper API get the extcon device name on extcon consumer device.
- Add usase case about OF helper API of extcon in dwc3-omap.c. dwc3-omap driver
  use extcon subsystem to detect the state of USB/USB-Host cable so dwc3-omap
  call of_extcon_get_extcon_device() to need extcon device name.

2. Modify extcon-palmas.c driver
- Provide option to select whether interrupt is used or not
- Support suspend/resume for palmas driver
- Update palmas interrupt register to detect ID pin
- Code clean to remove unused data
- Rename filename for device tree binding (extcon-twl.txt -> extcon-palmas.txt)

3. Use power_effcient_wq on extcon core driver/extcon-arizona instead of system_wq
- extcon core driver(extcon-gpio.c/extcon-adc-jack.c) use power_effcient_wq
instead of system_wq.

Documentation/devicetree/bindings/extcon/extcon-twl.txt → Documentation/devicetree/bindings/extcon/extcon-palmas.txt

-EXTCON FOR TWL CHIPS
+EXTCON FOR PALMAS/TWL CHIPS
 
 PALMAS USB COMPARATOR
 Required Properties:
  - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb"
- - vbus-supply : phandle to the regulator device tree node.
 
 Optional Properties:
  - ti,wakeup : To enable the wakeup comparator in probe
+ - ti,enable-id-detection: Perform ID detection.
+ - ti,enable-vbus-detection: Perform VBUS detection.
 
 palmas-usb {
        compatible = "ti,twl6035-usb", "ti,palmas-usb";
-       vbus-supply = <&smps10_reg>;
        ti,wakeup;
 };

Documentation/devicetree/bindings/usb/omap-usb.txt

@@ -53,6 +53,11 @@ OMAP DWC3 GLUE
    It should be set to "1" for HW mode and "2" for SW mode.
  - ranges: the child address space are mapped 1:1 onto the parent address space
 
+Optional Properties:
+ - extcon : phandle for the extcon device omap dwc3 uses to detect
+   connect/disconnect events.
+ - vbus-supply : phandle to the regulator device tree node if needed.
+
 Sub-nodes:
 The dwc3 core should be added as subnode to omap dwc3 glue.
 - dwc3 :

drivers/extcon/Kconfig

@@ -14,6 +14,10 @@ if EXTCON
 
 comment "Extcon Device Drivers"
 
+config OF_EXTCON
+	def_tristate y
+	depends on OF
+
 config EXTCON_GPIO
 	tristate "GPIO extcon support"
 	depends on GPIOLIB

drivers/extcon/Makefile

@@ -2,6 +2,8 @@
 # Makefile for external connector class (extcon) devices
 #
 
+obj-$(CONFIG_OF_EXTCON)		+= of_extcon.o
+
 obj-$(CONFIG_EXTCON)		+= extcon-class.o
 obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o
 obj-$(CONFIG_EXTCON_ADC_JACK)	+= extcon-adc-jack.o

drivers/extcon/extcon-adc-jack.c

@@ -87,7 +87,8 @@ static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
 {
 	struct adc_jack_data *data = _data;
 
-	schedule_delayed_work(&data->handler, data->handling_delay);
+	queue_delayed_work(system_power_efficient_wq,
+			   &data->handler, data->handling_delay);
 	return IRQ_HANDLED;
 }
 

drivers/extcon/extcon-arizona.c

@@ -890,8 +890,9 @@ static void arizona_micd_detect(struct work_struct *work)
 
 handled:
 	if (info->detecting)
-		schedule_delayed_work(&info->micd_timeout_work,
-				      msecs_to_jiffies(info->micd_timeout));
+		queue_delayed_work(system_power_efficient_wq,
+				   &info->micd_timeout_work,
+				   msecs_to_jiffies(info->micd_timeout));
 
 	pm_runtime_mark_last_busy(info->dev);
 	mutex_unlock(&info->lock);
@@ -912,8 +913,9 @@ static irqreturn_t arizona_micdet(int irq, void *data)
 	mutex_unlock(&info->lock);
 
 	if (debounce)
-		schedule_delayed_work(&info->micd_detect_work,
-				      msecs_to_jiffies(debounce));
+		queue_delayed_work(system_power_efficient_wq,
+				   &info->micd_detect_work,
+				   msecs_to_jiffies(debounce));
 	else
 		arizona_micd_detect(&info->micd_detect_work.work);
 
@@ -967,12 +969,14 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 	if (val == info->last_jackdet) {
 		dev_dbg(arizona->dev, "Suppressing duplicate JACKDET\n");
 		if (cancelled_hp)
-			schedule_delayed_work(&info->hpdet_work,
-					      msecs_to_jiffies(HPDET_DEBOUNCE));
+			queue_delayed_work(system_power_efficient_wq,
+					   &info->hpdet_work,
+					   msecs_to_jiffies(HPDET_DEBOUNCE));
 
 		if (cancelled_mic)
-			schedule_delayed_work(&info->micd_timeout_work,
-					      msecs_to_jiffies(info->micd_timeout));
+			queue_delayed_work(system_power_efficient_wq,
+					   &info->micd_timeout_work,
+					   msecs_to_jiffies(info->micd_timeout));
 
 		goto out;
 	}
@@ -994,8 +998,9 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 
 			arizona_start_mic(info);
 		} else {
-			schedule_delayed_work(&info->hpdet_work,
-					      msecs_to_jiffies(HPDET_DEBOUNCE));
+			queue_delayed_work(system_power_efficient_wq,
+					   &info->hpdet_work,
+					   msecs_to_jiffies(HPDET_DEBOUNCE));
 		}
 
 		regmap_update_bits(arizona->regmap,

drivers/extcon/extcon-class.c

@@ -602,7 +602,8 @@ int extcon_dev_register(struct extcon_dev *edev, struct device *dev)
 	edev->dev->class = extcon_class;
 	edev->dev->release = extcon_dev_release;
 
-	dev_set_name(edev->dev, "%s", edev->name ? edev->name : dev_name(dev));
+	edev->name = edev->name ? edev->name : dev_name(dev);
+	dev_set_name(edev->dev, "%s", edev->name);
 
 	if (edev->max_supported) {
 		char buf[10];

drivers/extcon/extcon-gpio.c

@@ -56,7 +56,7 @@ static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
 {
 	struct gpio_extcon_data *extcon_data = dev_id;
 
-	schedule_delayed_work(&extcon_data->work,
+	queue_delayed_work(system_power_efficient_wq, &extcon_data->work,
 			      extcon_data->debounce_jiffies);
 	return IRQ_HANDLED;
 }

drivers/extcon/extcon-palmas.c

@@ -57,6 +57,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 		if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
 			extcon_set_cable_state(&palmas_usb->edev, "USB", true);
+			dev_info(palmas_usb->dev, "USB cable is attached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
 				"Spurious connect event detected\n");
@@ -65,6 +66,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 		if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
 			extcon_set_cable_state(&palmas_usb->edev, "USB", false);
+			dev_info(palmas_usb->dev, "USB cable is detached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
 				"Spurious disconnect event detected\n");
@@ -83,29 +85,24 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 		PALMAS_USB_ID_INT_LATCH_SET, &set);
 
 	if (set & PALMAS_USB_ID_INT_SRC_ID_GND) {
-		palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
-			PALMAS_USB_ID_INT_EN_HI_SET,
-			PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT);
-		palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
-			PALMAS_USB_ID_INT_EN_HI_CLR,
-			PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
 		palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
 			PALMAS_USB_ID_INT_LATCH_CLR,
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
 		extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", true);
+		dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
 	} else if (set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) {
-		palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
-			PALMAS_USB_ID_INT_EN_HI_SET,
-			PALMAS_USB_ID_INT_EN_HI_SET_ID_GND);
-		palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
-			PALMAS_USB_ID_INT_EN_HI_CLR,
-			PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
 		palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
 			PALMAS_USB_ID_INT_LATCH_CLR,
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
 		extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", false);
+		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
+	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
+				(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
+		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
+		extcon_set_cable_state(&palmas_usb->edev, "USB-HOST", false);
+		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	}
 
 	return IRQ_HANDLED;
@@ -122,13 +119,17 @@ static void palmas_enable_irq(struct palmas_usb *palmas_usb)
 
 	palmas_write(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
 		PALMAS_USB_ID_INT_EN_HI_SET,
-		PALMAS_USB_ID_INT_EN_HI_SET_ID_GND);
+		PALMAS_USB_ID_INT_EN_HI_SET_ID_GND |
+		PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT);
 
-	palmas_vbus_irq_handler(palmas_usb->vbus_irq, palmas_usb);
+	if (palmas_usb->enable_vbus_detection)
+		palmas_vbus_irq_handler(palmas_usb->vbus_irq, palmas_usb);
 
 	/* cold plug for host mode needs this delay */
-	msleep(30);
-	palmas_id_irq_handler(palmas_usb->id_irq, palmas_usb);
+	if (palmas_usb->enable_id_detection) {
+		msleep(30);
+		palmas_id_irq_handler(palmas_usb->id_irq, palmas_usb);
+	}
 }
 
 static int palmas_usb_probe(struct platform_device *pdev)
@@ -139,21 +140,25 @@ static int palmas_usb_probe(struct platform_device *pdev)
 	struct palmas_usb *palmas_usb;
 	int status;
 
-	if (node && !pdata) {
-		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-
-		if (!pdata)
-			return -ENOMEM;
-
-		pdata->wakeup = of_property_read_bool(node, "ti,wakeup");
-	} else if (!pdata) {
-		return -EINVAL;
-	}
-
 	palmas_usb = devm_kzalloc(&pdev->dev, sizeof(*palmas_usb), GFP_KERNEL);
 	if (!palmas_usb)
 		return -ENOMEM;
 
+	if (node && !pdata) {
+		palmas_usb->wakeup = of_property_read_bool(node, "ti,wakeup");
+		palmas_usb->enable_id_detection = of_property_read_bool(node,
+						"ti,enable-id-detection");
+		palmas_usb->enable_vbus_detection = of_property_read_bool(node,
+						"ti,enable-vbus-detection");
+	} else {
+		palmas_usb->wakeup = true;
+		palmas_usb->enable_id_detection = true;
+		palmas_usb->enable_vbus_detection = true;
+
+		if (pdata)
+			palmas_usb->wakeup = pdata->wakeup;
+	}
+
 	palmas->usb = palmas_usb;
 	palmas_usb->palmas = palmas;
 
@@ -168,11 +173,10 @@ static int palmas_usb_probe(struct platform_device *pdev)
 	palmas_usb->vbus_irq = regmap_irq_get_virq(palmas->irq_data,
 						PALMAS_VBUS_IRQ);
 
-	palmas_usb_wakeup(palmas, pdata->wakeup);
+	palmas_usb_wakeup(palmas, palmas_usb->wakeup);
 
 	platform_set_drvdata(pdev, palmas_usb);
 
-	palmas_usb->edev.name = "palmas-usb";
 	palmas_usb->edev.supported_cable = palmas_extcon_cable;
 	palmas_usb->edev.mutually_exclusive = mutually_exclusive;
 
@@ -182,28 +186,36 @@ static int palmas_usb_probe(struct platform_device *pdev)
 		return status;
 	}
 
-	status = devm_request_threaded_irq(palmas_usb->dev, palmas_usb->id_irq,
-			NULL, palmas_id_irq_handler,
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"palmas_usb_id", palmas_usb);
-	if (status < 0) {
-		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+	if (palmas_usb->enable_id_detection) {
+		status = devm_request_threaded_irq(palmas_usb->dev,
+				palmas_usb->id_irq,
+				NULL, palmas_id_irq_handler,
+				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
+				IRQF_ONESHOT | IRQF_EARLY_RESUME,
+				"palmas_usb_id", palmas_usb);
+		if (status < 0) {
+			dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
 					palmas_usb->id_irq, status);
-		goto fail_extcon;
+			goto fail_extcon;
+		}
 	}
 
-	status = devm_request_threaded_irq(palmas_usb->dev,
-			palmas_usb->vbus_irq, NULL, palmas_vbus_irq_handler,
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"palmas_usb_vbus", palmas_usb);
-	if (status < 0) {
-		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+	if (palmas_usb->enable_vbus_detection) {
+		status = devm_request_threaded_irq(palmas_usb->dev,
+				palmas_usb->vbus_irq, NULL,
+				palmas_vbus_irq_handler,
+				IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
+				IRQF_ONESHOT | IRQF_EARLY_RESUME,
+				"palmas_usb_vbus", palmas_usb);
+		if (status < 0) {
+			dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
 					palmas_usb->vbus_irq, status);
-		goto fail_extcon;
+			goto fail_extcon;
+		}
 	}
 
 	palmas_enable_irq(palmas_usb);
-
+	device_set_wakeup_capable(&pdev->dev, true);
 	return 0;
 
 fail_extcon:
@@ -221,6 +233,39 @@ static int palmas_usb_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int palmas_usb_suspend(struct device *dev)
+{
+	struct palmas_usb *palmas_usb = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev)) {
+		if (palmas_usb->enable_vbus_detection)
+			enable_irq_wake(palmas_usb->vbus_irq);
+		if (palmas_usb->enable_id_detection)
+			enable_irq_wake(palmas_usb->id_irq);
+	}
+	return 0;
+}
+
+static int palmas_usb_resume(struct device *dev)
+{
+	struct palmas_usb *palmas_usb = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev)) {
+		if (palmas_usb->enable_vbus_detection)
+			disable_irq_wake(palmas_usb->vbus_irq);
+		if (palmas_usb->enable_id_detection)
+			disable_irq_wake(palmas_usb->id_irq);
+	}
+	return 0;
+};
+#endif
+
+static const struct dev_pm_ops palmas_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(palmas_usb_suspend,
+				palmas_usb_resume)
+};
+
 static struct of_device_id of_palmas_match_tbl[] = {
 	{ .compatible = "ti,palmas-usb", },
 	{ .compatible = "ti,twl6035-usb", },
@@ -234,6 +279,7 @@ static struct platform_driver palmas_usb_driver = {
 		.name = "palmas-usb",
 		.of_match_table = of_palmas_match_tbl,
 		.owner = THIS_MODULE,
+		.pm = &palmas_pm_ops,
 	},
 };
 

drivers/extcon/of_extcon.c

+/*
+ * OF helpers for External connector (extcon) framework
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ * Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/extcon/of_extcon.h>
+
+/*
+ * of_extcon_get_extcon_dev - Get the name of extcon device from devicetree
+ * @dev - instance to the given device
+ * @index - index into list of extcon_dev
+ *
+ * return the instance of extcon device
+ */
+struct extcon_dev *of_extcon_get_extcon_dev(struct device *dev, int index)
+{
+	struct device_node *node;
+	struct extcon_dev *edev;
+	struct platform_device *extcon_parent_dev;
+
+	if (!dev->of_node) {
+		dev_dbg(dev, "device does not have a device node entry\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	node = of_parse_phandle(dev->of_node, "extcon", index);
+	if (!node) {
+		dev_dbg(dev, "failed to get phandle in %s node\n",
+			dev->of_node->full_name);
+		return ERR_PTR(-ENODEV);
+	}
+
+	extcon_parent_dev = of_find_device_by_node(node);
+	if (!extcon_parent_dev) {
+		dev_dbg(dev, "unable to find device by node\n");
+		return ERR_PTR(-EPROBE_DEFER);
+	}
+
+	edev = extcon_get_extcon_dev(dev_name(&extcon_parent_dev->dev));
+	if (!edev) {
+		dev_dbg(dev, "unable to get extcon device : %s\n",
+				dev_name(&extcon_parent_dev->dev));
+		return ERR_PTR(-ENODEV);
+	}
+
+	return edev;
+}
+EXPORT_SYMBOL_GPL(of_extcon_get_extcon_dev);

drivers/usb/dwc3/Kconfig

 config USB_DWC3
 	tristate "DesignWare USB3 DRD Core Support"
 	depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
+	depends on EXTCON
 	select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
 	help
 	  Say Y or M here if your system has a Dual Role SuperSpeed

drivers/usb/dwc3/dwc3-omap.c

@@ -43,13 +43,15 @@
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dwc3-omap.h>
-#include <linux/usb/dwc3-omap.h>
 #include <linux/pm_runtime.h>
 #include <linux/dma-mapping.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/extcon.h>
+#include <linux/extcon/of_extcon.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/usb/otg.h>
 
@@ -155,9 +157,21 @@ struct dwc3_omap {
 	u32			revision;
 
 	u32			dma_status:1;
+
+	struct extcon_specific_cable_nb extcon_vbus_dev;
+	struct extcon_specific_cable_nb extcon_id_dev;
+	struct notifier_block	vbus_nb;
+	struct notifier_block	id_nb;
+
+	struct regulator	*vbus_reg;
 };
 
-static struct dwc3_omap		*_omap;
+enum omap_dwc3_vbus_id_status {
+	OMAP_DWC3_ID_FLOAT,
+	OMAP_DWC3_ID_GROUND,
+	OMAP_DWC3_VBUS_OFF,
+	OMAP_DWC3_VBUS_VALID,
+};
 
 static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset)
 {
@@ -221,18 +235,24 @@ static void dwc3_omap_write_irq0_set(struct dwc3_omap *omap, u32 value)
 						omap->irq0_offset, value);
 }
 
-int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
+static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
+	enum omap_dwc3_vbus_id_status status)
 {
-	u32			val;
-	struct dwc3_omap	*omap = _omap;
-
-	if (!omap)
-		return -EPROBE_DEFER;
+	int	ret;
+	u32	val;
 
 	switch (status) {
 	case OMAP_DWC3_ID_GROUND:
 		dev_dbg(omap->dev, "ID GND\n");
 
+		if (omap->vbus_reg) {
+			ret = regulator_enable(omap->vbus_reg);
+			if (ret) {
+				dev_dbg(omap->dev, "regulator enable failed\n");
+				return;
+			}
+		}
+
 		val = dwc3_omap_read_utmi_status(omap);
 		val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG
 				| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
@@ -255,6 +275,9 @@ int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
 		break;
 
 	case OMAP_DWC3_ID_FLOAT:
+		if (omap->vbus_reg)
+			regulator_disable(omap->vbus_reg);
+
 	case OMAP_DWC3_VBUS_OFF:
 		dev_dbg(omap->dev, "VBUS Disconnect\n");
 
@@ -268,12 +291,9 @@ int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
 		break;
 
 	default:
-		dev_dbg(omap->dev, "ID float\n");
+		dev_dbg(omap->dev, "invalid state\n");
 	}
-
-	return 0;
 }
-EXPORT_SYMBOL_GPL(dwc3_omap_mailbox);
 
 static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 {
@@ -366,6 +386,32 @@ static void dwc3_omap_disable_irqs(struct dwc3_omap *omap)
 
 static u64 dwc3_omap_dma_mask = DMA_BIT_MASK(32);
 
+static int dwc3_omap_id_notifier(struct notifier_block *nb,
+	unsigned long event, void *ptr)
+{
+	struct dwc3_omap *omap = container_of(nb, struct dwc3_omap, id_nb);
+
+	if (event)
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
+	else
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT);
+
+	return NOTIFY_DONE;
+}
+
+static int dwc3_omap_vbus_notifier(struct notifier_block *nb,
+	unsigned long event, void *ptr)
+{
+	struct dwc3_omap *omap = container_of(nb, struct dwc3_omap, vbus_nb);
+
+	if (event)
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
+	else
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF);
+
+	return NOTIFY_DONE;
+}
+
 static int dwc3_omap_probe(struct platform_device *pdev)
 {
 	struct device_node	*node = pdev->dev.of_node;
@@ -373,6 +419,8 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	struct dwc3_omap	*omap;
 	struct resource		*res;
 	struct device		*dev = &pdev->dev;
+	struct extcon_dev	*edev;
+	struct regulator	*vbus_reg = NULL;
 
 	int			ret = -ENOMEM;
 	int			irq;
@@ -415,19 +463,22 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	if (of_property_read_bool(node, "vbus-supply")) {
+		vbus_reg = devm_regulator_get(dev, "vbus");
+		if (IS_ERR(vbus_reg)) {
+			dev_err(dev, "vbus init failed\n");
+			return PTR_ERR(vbus_reg);
+		}
+	}
+
 	spin_lock_init(&omap->lock);
 
 	omap->dev	= dev;
 	omap->irq	= irq;
 	omap->base	= base;
+	omap->vbus_reg	= vbus_reg;
 	dev->dma_mask	= &dwc3_omap_dma_mask;
 
-	/*
-	 * REVISIT if we ever have two instances of the wrapper, we will be
-	 * in big trouble
-	 */
-	_omap	= omap;
-
 	pm_runtime_enable(dev);
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
@@ -502,14 +553,46 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 
 	dwc3_omap_enable_irqs(omap);
 
+	if (of_property_read_bool(node, "extcon")) {
+		edev = of_extcon_get_extcon_dev(dev, 0);
+		if (IS_ERR(edev)) {
+			dev_vdbg(dev, "couldn't get extcon device\n");
+			ret = PTR_ERR(edev);
+			goto err2;
+		}
+
+		omap->vbus_nb.notifier_call = dwc3_omap_vbus_notifier;
+		ret = extcon_register_interest(&omap->extcon_vbus_dev,
+			edev->name, "USB", &omap->vbus_nb);
+		if (ret < 0)
+			dev_vdbg(dev, "failed to register notifier for USB\n");
+		omap->id_nb.notifier_call = dwc3_omap_id_notifier;
+		ret = extcon_register_interest(&omap->extcon_id_dev, edev->name,
+					 "USB-HOST", &omap->id_nb);
+		if (ret < 0)
+			dev_vdbg(dev,
+				"failed to register notifier for USB-HOST\n");
+
+		if (extcon_get_cable_state(edev, "USB") == true)
+			dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
+		if (extcon_get_cable_state(edev, "USB-HOST") == true)
+			dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
+	}
+
 	ret = of_platform_populate(node, NULL, NULL, dev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to create dwc3 core\n");
-		goto err2;
+		goto err3;
 	}
 
 	return 0;
 
+err3:
+	if (omap->extcon_vbus_dev.edev)
+		extcon_unregister_interest(&omap->extcon_vbus_dev);
+	if (omap->extcon_id_dev.edev)
+		extcon_unregister_interest(&omap->extcon_id_dev);
+
 err2:
 	dwc3_omap_disable_irqs(omap);
 
@@ -526,6 +609,10 @@ static int dwc3_omap_remove(struct platform_device *pdev)
 {
 	struct dwc3_omap	*omap = platform_get_drvdata(pdev);
 
+	if (omap->extcon_vbus_dev.edev)
+		extcon_unregister_interest(&omap->extcon_vbus_dev);
+	if (omap->extcon_id_dev.edev)
+		extcon_unregister_interest(&omap->extcon_id_dev);
 	dwc3_omap_disable_irqs(omap);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);

include/linux/extcon/of_extcon.h

+/*
+ * OF helpers for External connector (extcon) framework
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ * Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * Copyright (C) 2013 Samsung Electronics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_OF_EXTCON_H
+#define __LINUX_OF_EXTCON_H
+
+#include <linux/err.h>
+
+#if IS_ENABLED(CONFIG_OF_EXTCON)
+extern struct extcon_dev
+	*of_extcon_get_extcon_dev(struct device *dev, int index);
+#else
+static inline struct extcon_dev
+	*of_extcon_get_extcon_dev(struct device *dev, int index)
+{
+	return ERR_PTR(-ENOSYS);
+}
+#endif /* CONFIG_OF_EXTCON */
+#endif /* __LINUX_OF_EXTCON_H */

include/linux/mfd/palmas.h

@@ -371,17 +371,15 @@ struct palmas_usb {
 
 	struct extcon_dev edev;
 
-	/* used to set vbus, in atomic path */
-	struct work_struct set_vbus_work;
-
 	int id_otg_irq;
 	int id_irq;
 	int vbus_otg_irq;
 	int vbus_irq;
 
-	int vbus_enable;
-
 	enum palmas_usb_state linkstat;
+	int wakeup;
+	bool enable_vbus_detection;
+	bool enable_id_detection;
 };
 
 #define comparator_to_palmas(x) container_of((x), struct palmas_usb, comparator)

include/linux/usb/dwc3-omap.h

-/*
- * Copyright (C) 2013 by Texas Instruments
- *
- * The Inventra Controller Driver for Linux is free software; you
- * can redistribute it and/or modify it under the terms of the GNU
- * General Public License version 2 as published by the Free Software
- * Foundation.
- */
-
-#ifndef __DWC3_OMAP_H__
-#define __DWC3_OMAP_H__
-
-enum omap_dwc3_vbus_id_status {
-	OMAP_DWC3_UNKNOWN = 0,
-	OMAP_DWC3_ID_GROUND,
-	OMAP_DWC3_ID_FLOAT,
-	OMAP_DWC3_VBUS_VALID,
-	OMAP_DWC3_VBUS_OFF,
-};
-
-#if (defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_DWC3_MODULE))
-extern int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status);
-#else
-static inline int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
-{
-	return -ENODEV;
-}
-#endif
-
-#endif	/* __DWC3_OMAP_H__ */