Merge tag 'iio-for-3.17c' of...

Merge tag 'iio-for-3.17c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

3rd round of IIO new drivers, cleanups and functionality for the 3.17 cycle.

New drivers
* isl29125 digital color light sensor driver
* TAOS/AMS tcs3414 digital color sensor

Staging graduation
* ad7291 ADC driver.

New functionality
* st_sensors - device tree support and bindings
* mma8452 - device tree support

Cleanups
* Drop redundant variables in a number of drivers.
* Reorder a structure definition to ealy wiht a warning about static
  not being at the beginning in the hid-sensors driver.
* Switch a few more drivers away from using explicit sampling_frequency
  attribute to providing this through the core.
* Make hid_sensor_get_reporting_interval static as only used within a single
  file.
* Drop a redundant check for negative values in an unsigned variable from
  ad9832
* Drop some duplicate case labels in the event monitor example code.
* Use devm_ioremap_resource to simplify error handling.
* Use devm_kzalloc within the blackfin timer driver to simplify error
  handling and removal.
* A number of cleanups of the ad7291 from Hartmut Knaack in response
  to a patch moving it out of staging.
* Core support for the period info element about events.  It has been
  in the abi for a while, but not added until now to the newer handling
  of information related to events.
* Add HAS_IOMEM dependency to mxs_lradc to avoid build issues when testing
  enabled.

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -50,6 +50,7 @@ epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
 fsl,mag3110		MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
 fsl,mc13892		MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
 fsl,mma8450		MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
+fsl,mma8452		MMA8452Q: 3-axis 12-bit / 8-bit Digital Accelerometer
 fsl,mpr121		MPR121: Proximity Capacitive Touch Sensor Controller
 fsl,sgtl5000		SGTL5000: Ultra Low-Power Audio Codec
 gmt,g751		G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface

Documentation/devicetree/bindings/iio/st-sensors.txt

+STMicroelectronics MEMS sensors
+
+The STMicroelectronics sensor devices are pretty straight-forward I2C or
+SPI devices, all sharing the same device tree descriptions no matter what
+type of sensor it is.
+
+Required properties:
+- compatible: see the list of valid compatible strings below
+- reg: the I2C or SPI address the device will respond to
+
+Optional properties:
+- vdd-supply: an optional regulator that needs to be on to provide VDD
+  power to the sensor.
+- vddio-supply: an optional regulator that needs to be on to provide the
+  VDD IO power to the sensor.
+- st,drdy-int-pin: the pin on the package that will be used to signal
+  "data ready" (valid values: 1 or 2). This property is not configurable
+  on all sensors.
+
+Sensors may also have applicable pin control settings, those use the
+standard bindings from pinctrl/pinctrl-bindings.txt.
+
+Valid compatible strings:
+
+Accelerometers:
+- st,lsm303dlh-accel
+- st,lsm303dlhc-accel
+- st,lis3dh-accel
+- st,lsm330d-accel
+- st,lsm330dl-accel
+- st,lsm330dlc-accel
+- st,lis331dlh-accel
+- st,lsm303dl-accel
+- st,lsm303dlm-accel
+- st,lsm330-accel
+
+Gyroscopes:
+- st,l3g4200d-gyro
+- st,lsm330d-gyro
+- st,lsm330dl-gyro
+- st,lsm330dlc-gyro
+- st,l3gd20-gyro
+- st,l3g4is-gyro
+- st,lsm330-gyro
+
+Magnetometers:
+- st,lsm303dlhc-magn
+- st,lsm303dlm-magn
+- st,lis3mdl-magn
+
+Pressure sensors:
+- st,lps001wp-press
+- st,lps25h-press
+- st,lps331ap-press

drivers/iio/accel/mma8452.c

@@ -423,9 +423,15 @@ static const struct i2c_device_id mma8452_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, mma8452_id);
 
+static const struct of_device_id mma8452_dt_ids[] = {
+	{ .compatible = "fsl,mma8452" },
+	{ }
+};
+
 static struct i2c_driver mma8452_driver = {
 	.driver = {
 		.name	= "mma8452",
+		.of_match_table = of_match_ptr(mma8452_dt_ids),
 		.pm	= MMA8452_PM_OPS,
 	},
 	.probe = mma8452_probe,

drivers/iio/accel/st_accel_core.c

@@ -393,6 +393,9 @@ static int st_accel_read_raw(struct iio_dev *indio_dev,
 		*val = 0;
 		*val2 = adata->current_fullscale->gain;
 		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = adata->odr;
+		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
 	}
@@ -410,6 +413,13 @@ static int st_accel_write_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SCALE:
 		err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
 		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2)
+			return -EINVAL;
+		mutex_lock(&indio_dev->mlock);
+		err = st_sensors_set_odr(indio_dev, val);
+		mutex_unlock(&indio_dev->mlock);
+		return err;
 	default:
 		return -EINVAL;
 	}
@@ -417,14 +427,12 @@ static int st_accel_write_raw(struct iio_dev *indio_dev,
 	return err;
 }
 
-static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
 static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
 static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_accel_scale_available);
 
 static struct attribute *st_accel_attributes[] = {
 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 	&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
-	&iio_dev_attr_sampling_frequency.dev_attr.attr,
 	NULL,
 };
 

drivers/iio/accel/st_accel_i2c.c

@@ -18,6 +18,55 @@
 #include <linux/iio/common/st_sensors_i2c.h>
 #include "st_accel.h"
 
+#ifdef CONFIG_OF
+static const struct of_device_id st_accel_of_match[] = {
+	{
+		.compatible = "st,lsm303dlh-accel",
+		.data = LSM303DLH_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm303dlhc-accel",
+		.data = LSM303DLHC_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lis3dh-accel",
+		.data = LIS3DH_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330d-accel",
+		.data = LSM330D_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dl-accel",
+		.data = LSM330DL_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dlc-accel",
+		.data = LSM330DLC_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lis331dlh-accel",
+		.data = LIS331DLH_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm303dl-accel",
+		.data = LSM303DL_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm303dlm-accel",
+		.data = LSM303DLM_ACCEL_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330-accel",
+		.data = LSM330_ACCEL_DEV_NAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_accel_of_match);
+#else
+#define st_accel_of_match NULL
+#endif
+
 static int st_accel_i2c_probe(struct i2c_client *client,
 						const struct i2c_device_id *id)
 {
@@ -31,6 +80,7 @@ static int st_accel_i2c_probe(struct i2c_client *client,
 
 	adata = iio_priv(indio_dev);
 	adata->dev = &client->dev;
+	st_sensors_of_i2c_probe(client, st_accel_of_match);
 
 	st_sensors_i2c_configure(indio_dev, client, adata);
 
@@ -67,6 +117,7 @@ static struct i2c_driver st_accel_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = "st-accel-i2c",
+		.of_match_table = of_match_ptr(st_accel_of_match),
 	},
 	.probe = st_accel_i2c_probe,
 	.remove = st_accel_i2c_remove,

drivers/iio/adc/Kconfig

@@ -20,6 +20,16 @@ config AD7266
 	  Say yes here to build support for Analog Devices AD7265 and AD7266
 	  ADCs.
 
+config AD7291
+	tristate "Analog Devices AD7291 ADC driver"
+	depends on I2C
+	help
+	  Say yes here to build support for Analog Devices AD7291
+	  8 Channel ADC with temperature sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7291.
+
 config AD7298
 	tristate "Analog Devices AD7298 ADC driver"
 	depends on SPI

drivers/iio/adc/Makefile

@@ -5,6 +5,7 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD_SIGMA_DELTA) += ad_sigma_delta.o
 obj-$(CONFIG_AD7266) += ad7266.o
+obj-$(CONFIG_AD7291) += ad7291.o
 obj-$(CONFIG_AD7298) += ad7298.o
 obj-$(CONFIG_AD7923) += ad7923.o
 obj-$(CONFIG_AD7476) += ad7476.o

drivers/staging/iio/adc/ad7291.c → drivers/iio/adc/ad7291.c

@@ -6,22 +6,22 @@
  * Licensed under the GPL-2 or later.
  */
 
-#include <linux/interrupt.h>
 #include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
+#include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/regulator/consumer.h>
-#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/iio/events.h>
 
-#include "ad7291.h"
+#include <linux/platform_data/ad7291.h>
 
 /*
  * Simplified handling
@@ -31,7 +31,6 @@
  * is in the read mask.
  *
  * The noise-delayed bit as per datasheet suggestion is always enabled.
- *
  */
 
 /*
@@ -47,33 +46,38 @@
 #define AD7291_VOLTAGE_ALERT_STATUS	0x1F
 #define AD7291_T_ALERT_STATUS		0x20
 
+#define AD7291_BITS			12
 #define AD7291_VOLTAGE_LIMIT_COUNT	8
 
 
 /*
  * AD7291 command
  */
-#define AD7291_AUTOCYCLE		(1 << 0)
-#define AD7291_RESET			(1 << 1)
-#define AD7291_ALERT_CLEAR		(1 << 2)
-#define AD7291_ALERT_POLARITY		(1 << 3)
-#define AD7291_EXT_REF			(1 << 4)
-#define AD7291_NOISE_DELAY		(1 << 5)
-#define AD7291_T_SENSE_MASK		(1 << 7)
-#define AD7291_VOLTAGE_MASK		0xFF00
-#define AD7291_VOLTAGE_OFFSET		0x8
+#define AD7291_AUTOCYCLE		BIT(0)
+#define AD7291_RESET			BIT(1)
+#define AD7291_ALERT_CLEAR		BIT(2)
+#define AD7291_ALERT_POLARITY		BIT(3)
+#define AD7291_EXT_REF			BIT(4)
+#define AD7291_NOISE_DELAY		BIT(5)
+#define AD7291_T_SENSE_MASK		BIT(7)
+#define AD7291_VOLTAGE_MASK		GENMASK(15, 8)
+#define AD7291_VOLTAGE_OFFSET		8
 
 /*
  * AD7291 value masks
  */
-#define AD7291_CHANNEL_MASK		0xF000
-#define AD7291_BITS			12
-#define AD7291_VALUE_MASK		0xFFF
-#define AD7291_T_VALUE_SIGN		0x400
-#define AD7291_T_VALUE_FLOAT_OFFSET	2
-#define AD7291_T_VALUE_FLOAT_MASK	0x2
+#define AD7291_VALUE_MASK		GENMASK(11, 0)
+
+/*
+ * AD7291 alert register bits
+ */
+#define AD7291_T_LOW			BIT(0)
+#define AD7291_T_HIGH			BIT(1)
+#define AD7291_T_AVG_LOW		BIT(2)
+#define AD7291_T_AVG_HIGH		BIT(3)
+#define AD7291_V_LOW(x)			BIT((x) * 2)
+#define AD7291_V_HIGH(x)		BIT((x) * 2 + 1)
 
-#define AD7291_BITS			12
 
 struct ad7291_chip_info {
 	struct i2c_client	*client;
@@ -129,14 +133,14 @@ static irqreturn_t ad7291_event_handler(int irq, void *private)
 	ad7291_i2c_write(chip, AD7291_COMMAND, command);
 
 	/* For now treat t_sense and t_sense_average the same */
-	if ((t_status & (1 << 0)) || (t_status & (1 << 2)))
+	if ((t_status & AD7291_T_LOW) || (t_status & AD7291_T_AVG_LOW))
 		iio_push_event(indio_dev,
 			       IIO_UNMOD_EVENT_CODE(IIO_TEMP,
 						    0,
 						    IIO_EV_TYPE_THRESH,
 						    IIO_EV_DIR_FALLING),
 			       timestamp);
-	if ((t_status & (1 << 1)) || (t_status & (1 << 3)))
+	if ((t_status & AD7291_T_HIGH) || (t_status & AD7291_T_AVG_HIGH))
 		iio_push_event(indio_dev,
 			       IIO_UNMOD_EVENT_CODE(IIO_TEMP,
 						    0,
@@ -144,18 +148,18 @@ static irqreturn_t ad7291_event_handler(int irq, void *private)
 						    IIO_EV_DIR_RISING),
 			       timestamp);
 
-	for (i = 0; i < AD7291_VOLTAGE_LIMIT_COUNT*2; i += 2) {
-		if (v_status & (1 << i))
+	for (i = 0; i < AD7291_VOLTAGE_LIMIT_COUNT; i++) {
+		if (v_status & AD7291_V_LOW(i))
 			iio_push_event(indio_dev,
 				       IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE,
-							    i/2,
+							    i,
 							    IIO_EV_TYPE_THRESH,
 							    IIO_EV_DIR_FALLING),
 				       timestamp);
-		if (v_status & (1 << (i + 1)))
+		if (v_status & AD7291_V_HIGH(i))
 			iio_push_event(indio_dev,
 				       IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE,
-							    i/2,
+							    i,
 							    IIO_EV_TYPE_THRESH,
 							    IIO_EV_DIR_RISING),
 				       timestamp);
@@ -165,7 +169,8 @@ static irqreturn_t ad7291_event_handler(int irq, void *private)
 }
 
 static unsigned int ad7291_threshold_reg(const struct iio_chan_spec *chan,
-	enum iio_event_direction dir, enum iio_event_info info)
+					 enum iio_event_direction dir,
+					 enum iio_event_info info)
 {
 	unsigned int offset;
 
@@ -174,7 +179,7 @@ static unsigned int ad7291_threshold_reg(const struct iio_chan_spec *chan,
 		offset = chan->channel;
 		break;
 	case IIO_TEMP:
-		offset = 8;
+		offset = AD7291_VOLTAGE_OFFSET;
 		break;
 	default:
 	    return 0;
@@ -182,14 +187,14 @@ static unsigned int ad7291_threshold_reg(const struct iio_chan_spec *chan,
 
 	switch (info) {
 	case IIO_EV_INFO_VALUE:
-			if (dir == IIO_EV_DIR_FALLING)
-					return AD7291_DATA_HIGH(offset);
-			else
-					return AD7291_DATA_LOW(offset);
+		if (dir == IIO_EV_DIR_FALLING)
+			return AD7291_DATA_HIGH(offset);
+		else
+			return AD7291_DATA_LOW(offset);
 	case IIO_EV_INFO_HYSTERESIS:
-			return AD7291_HYST(offset);
+		return AD7291_HYST(offset);
 	default:
-			break;
+		break;
 	}
 	return 0;
 }
@@ -206,7 +211,7 @@ static int ad7291_read_event_value(struct iio_dev *indio_dev,
 	u16 uval;
 
 	ret = ad7291_i2c_read(chip, ad7291_threshold_reg(chan, dir, info),
-		&uval);
+			      &uval);
 	if (ret < 0)
 		return ret;
 
@@ -237,7 +242,7 @@ static int ad7291_write_event_value(struct iio_dev *indio_dev,
 	}
 
 	return ad7291_i2c_write(chip, ad7291_threshold_reg(chan, dir, info),
-		val);
+				val);
 }
 
 static int ad7291_read_event_config(struct iio_dev *indio_dev,
@@ -246,15 +251,14 @@ static int ad7291_read_event_config(struct iio_dev *indio_dev,
 				    enum iio_event_direction dir)
 {
 	struct ad7291_chip_info *chip = iio_priv(indio_dev);
-	/* To be enabled the channel must simply be on. If any are enabled
-	   we are in continuous sampling mode */
+	/*
+	 * To be enabled the channel must simply be on. If any are enabled
+	 * we are in continuous sampling mode
+	 */
 
 	switch (chan->type) {
 	case IIO_VOLTAGE:
-		if (chip->c_mask & (1 << (15 - chan->channel)))
-			return 1;
-		else
-			return 0;
+		return !!(chip->c_mask & BIT(15 - chan->channel));
 	case IIO_TEMP:
 		/* always on */
 		return 1;
@@ -336,7 +340,7 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
 			}
 			/* Enable this channel alone */
 			regval = chip->command & (~AD7291_VOLTAGE_MASK);
-			regval |= 1 << (15 - chan->channel);
+			regval |= BIT(15 - chan->channel);
 			ret = ad7291_i2c_write(chip, AD7291_COMMAND, regval);
 			if (ret < 0) {
 				mutex_unlock(&chip->state_lock);
@@ -344,7 +348,7 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
 			}
 			/* Read voltage */
 			ret = i2c_smbus_read_word_swapped(chip->client,
-						       AD7291_VOLTAGE);
+							  AD7291_VOLTAGE);
 			if (ret < 0) {
 				mutex_unlock(&chip->state_lock);
 				return ret;
@@ -355,7 +359,7 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
 		case IIO_TEMP:
 			/* Assumes tsense bit of command register always set */
 			ret = i2c_smbus_read_word_swapped(chip->client,
-						       AD7291_T_SENSE);
+							  AD7291_T_SENSE);
 			if (ret < 0)
 				return ret;
 			*val = sign_extend32(ret, 11);
@@ -365,7 +369,7 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
 		}
 	case IIO_CHAN_INFO_AVERAGE_RAW:
 		ret = i2c_smbus_read_word_swapped(chip->client,
-					       AD7291_T_AVERAGE);
+						  AD7291_T_AVERAGE);
 			if (ret < 0)
 				return ret;
 			*val = sign_extend32(ret, 11);
@@ -375,6 +379,7 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
 		case IIO_VOLTAGE:
 			if (chip->reg) {
 				int vref;
+
 				vref = regulator_get_voltage(chip->reg);
 				if (vref < 0)
 					return vref;
@@ -460,7 +465,7 @@ static const struct iio_info ad7291_info = {
 };
 
 static int ad7291_probe(struct i2c_client *client,
-		const struct i2c_device_id *id)
+			const struct i2c_device_id *id)
 {
 	struct ad7291_platform_data *pdata = client->dev.platform_data;
 	struct ad7291_chip_info *chip;

drivers/iio/adc/xilinx-xadc-events.c

@@ -31,17 +31,11 @@ static const struct iio_chan_spec *xadc_event_to_channel(
 static void xadc_handle_event(struct iio_dev *indio_dev, unsigned int event)
 {
 	const struct iio_chan_spec *chan;
-	unsigned int offset;
 
 	/* Temperature threshold error, we don't handle this yet */
 	if (event == 0)
 		return;
 
-	if (event < 4)
-		offset = event;
-	else
-		offset = event + 4;
-
 	chan = xadc_event_to_channel(indio_dev, event);
 
 	if (chan->type == IIO_TEMP) {

drivers/iio/common/hid-sensors/hid-sensor-attributes.c

@@ -26,12 +26,12 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
-struct {
+static struct {
 	u32 usage_id;
 	int unit; /* 0 for default others from HID sensor spec */
 	int scale_val0; /* scale, whole number */
 	int scale_val1; /* scale, fraction in micros */
-} static unit_conversion[] = {
+} unit_conversion[] = {
 	{HID_USAGE_SENSOR_ACCEL_3D, 0, 9, 806650},
 	{HID_USAGE_SENSOR_ACCEL_3D,
 		HID_USAGE_SENSOR_UNITS_METERS_PER_SEC_SQRD, 1, 0},
@@ -343,6 +343,7 @@ int hid_sensor_format_scale(u32 usage_id,
 }
 EXPORT_SYMBOL(hid_sensor_format_scale);
 
+static
 int hid_sensor_get_reporting_interval(struct hid_sensor_hub_device *hsdev,
 					u32 usage_id,
 					struct hid_sensor_common *st)

drivers/iio/common/st_sensors/st_sensors_core.c

@@ -14,8 +14,8 @@
 #include <linux/delay.h>
 #include <linux/iio/iio.h>
 #include <linux/regulator/consumer.h>
+#include <linux/of.h>
 #include <asm/unaligned.h>
-
 #include <linux/iio/common/st_sensors.h>
 
 
@@ -265,14 +265,47 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static struct st_sensors_platform_data *st_sensors_of_probe(struct device *dev,
+		struct st_sensors_platform_data *defdata)
+{
+	struct st_sensors_platform_data *pdata;
+	struct device_node *np = dev->of_node;
+	u32 val;
+
+	if (!np)
+		return NULL;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!of_property_read_u32(np, "st,drdy-int-pin", &val) && (val <= 2))
+		pdata->drdy_int_pin = (u8) val;
+	else
+		pdata->drdy_int_pin = defdata ? defdata->drdy_int_pin : 1;
+
+	return pdata;
+}
+#else
+static struct st_sensors_platform_data *st_sensors_of_probe(struct device *dev,
+		struct st_sensors_platform_data *defdata)
+{
+	return NULL;
+}
+#endif
+
 int st_sensors_init_sensor(struct iio_dev *indio_dev,
 					struct st_sensors_platform_data *pdata)
 {
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	struct st_sensors_platform_data *of_pdata;
 	int err = 0;
 
 	mutex_init(&sdata->tb.buf_lock);
 
+	/* If OF/DT pdata exists, it will take precedence of anything else */
+	of_pdata = st_sensors_of_probe(indio_dev->dev.parent, pdata);
+	if (of_pdata)
+		pdata = of_pdata;
+
 	if (pdata)
 		err = st_sensors_set_drdy_int_pin(indio_dev, pdata);
 
@@ -463,35 +496,6 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
 }
 EXPORT_SYMBOL(st_sensors_check_device_support);
 
-ssize_t st_sensors_sysfs_get_sampling_frequency(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct st_sensor_data *adata = iio_priv(dev_get_drvdata(dev));
-
-	return sprintf(buf, "%d\n", adata->odr);
-}
-EXPORT_SYMBOL(st_sensors_sysfs_get_sampling_frequency);
-
-ssize_t st_sensors_sysfs_set_sampling_frequency(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t size)
-{
-	int err;
-	unsigned int odr;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
-
-	err = kstrtoint(buf, 10, &odr);
-	if (err < 0)
-		goto conversion_error;
-
-	mutex_lock(&indio_dev->mlock);
-	err = st_sensors_set_odr(indio_dev, odr);
-	mutex_unlock(&indio_dev->mlock);
-
-conversion_error:
-	return err < 0 ? err : size;
-}
-EXPORT_SYMBOL(st_sensors_sysfs_set_sampling_frequency);
-
 ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {

drivers/iio/common/st_sensors/st_sensors_i2c.c

@@ -12,6 +12,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/iio/iio.h>
+#include <linux/of_device.h>
 
 #include <linux/iio/common/st_sensors_i2c.h>
 
@@ -76,6 +77,35 @@ void st_sensors_i2c_configure(struct iio_dev *indio_dev,
 }
 EXPORT_SYMBOL(st_sensors_i2c_configure);
 
+#ifdef CONFIG_OF
+/**
+ * st_sensors_of_i2c_probe() - device tree probe for ST I2C sensors
+ * @client: the I2C client device for the sensor
+ * @match: the OF match table for the device, containing compatible strings
+ *	but also a .data field with the corresponding internal kernel name
+ *	used by this sensor.
+ *
+ * In effect this function matches a compatible string to an internal kernel
+ * name for a certain sensor device, so that the rest of the autodetection can
+ * rely on that name from this point on. I2C client devices will be renamed
+ * to match the internal kernel convention.
+ */
+void st_sensors_of_i2c_probe(struct i2c_client *client,
+			     const struct of_device_id *match)
+{
+	const struct of_device_id *of_id;
+
+	of_id = of_match_device(match, &client->dev);
+	if (!of_id)
+		return;
+
+	/* The name from the OF match takes precedence if present */
+	strncpy(client->name, of_id->data, sizeof(client->name));
+	client->name[sizeof(client->name) - 1] = '\0';
+}
+EXPORT_SYMBOL(st_sensors_of_i2c_probe);
+#endif
+
 MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
 MODULE_DESCRIPTION("STMicroelectronics ST-sensors i2c driver");
 MODULE_LICENSE("GPL v2");

drivers/iio/dac/ad5504.c

@@ -125,7 +125,6 @@ static int ad5504_write_raw(struct iio_dev *indio_dev,
 			       long mask)
 {
 	struct ad5504_state *st = iio_priv(indio_dev);
-	int ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
@@ -134,10 +133,8 @@ static int ad5504_write_raw(struct iio_dev *indio_dev,
 
 		return ad5504_spi_write(st, chan->address, val);
 	default:
-		ret = -EINVAL;
+		return -EINVAL;
 	}
-
-	return -EINVAL;
 }
 
 static const char * const ad5504_powerdown_modes[] = {

drivers/iio/dac/ad5624r_spi.c

@@ -67,7 +67,6 @@ static int ad5624r_write_raw(struct iio_dev *indio_dev,
 			       long mask)
 {
 	struct ad5624r_state *st = iio_priv(indio_dev);
-	int ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
@@ -79,10 +78,8 @@ static int ad5624r_write_raw(struct iio_dev *indio_dev,
 				chan->address, val,
 				chan->scan_type.shift);
 	default:
-		ret = -EINVAL;
+		return -EINVAL;
 	}
-
-	return -EINVAL;
 }
 
 static const char * const ad5624r_powerdown_modes[] = {

drivers/iio/dac/ad5686.c

@@ -313,7 +313,7 @@ static int ad5686_probe(struct spi_device *spi)
 {
 	struct ad5686_state *st;
 	struct iio_dev *indio_dev;
-	int ret, regdone = 0, voltage_uv = 0;
+	int ret, voltage_uv = 0;
 
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (indio_dev == NULL)
@@ -355,7 +355,6 @@ static int ad5686_probe(struct spi_device *spi)
 	indio_dev->channels = st->chip_info->channel;
 	indio_dev->num_channels = AD5686_DAC_CHANNELS;
 
-	regdone = 1;
 	ret = ad5686_spi_write(st, AD5686_CMD_INTERNAL_REFER_SETUP, 0,
 				!!voltage_uv, 0);
 	if (ret)

drivers/iio/gyro/adis16260.c

@@ -101,65 +101,6 @@
 #define ADIS16260_SCAN_TEMP	3
 #define ADIS16260_SCAN_ANGL	4
 
-static ssize_t adis16260_read_frequency(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct adis *adis = iio_priv(indio_dev);
-	int ret, len = 0;
-	u16 t;
-	int sps;
-	ret = adis_read_reg_16(adis, ADIS16260_SMPL_PRD, &t);
-	if (ret)
-		return ret;
-
-	if (spi_get_device_id(adis->spi)->driver_data) /* If an adis16251 */
-		sps = (t & ADIS16260_SMPL_PRD_TIME_BASE) ? 8 : 256;
-	else
-		sps = (t & ADIS16260_SMPL_PRD_TIME_BASE) ? 66 : 2048;
-	sps /= (t & ADIS16260_SMPL_PRD_DIV_MASK) + 1;
-	len = sprintf(buf, "%d\n", sps);
-	return len;
-}
-
-static ssize_t adis16260_write_frequency(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct adis *adis = iio_priv(indio_dev);
-	unsigned int val;
-	int ret;
-	u8 t;
-
-	ret = kstrtouint(buf, 10, &val);
-	if (ret)
-		return ret;
-
-	mutex_lock(&indio_dev->mlock);
-	if (spi_get_device_id(adis->spi)->driver_data)
-		t = 256 / val;
-	else
-		t = 2048 / val;
-
-	if (t > ADIS16260_SMPL_PRD_DIV_MASK)
-		t = ADIS16260_SMPL_PRD_DIV_MASK;
-	else if (t > 0)
-		t--;
-
-	if (t >= 0x0A)
-		adis->spi->max_speed_hz = ADIS16260_SPI_SLOW;
-	else
-		adis->spi->max_speed_hz = ADIS16260_SPI_FAST;
-	ret = adis_write_reg_8(adis, ADIS16260_SMPL_PRD, t);
-
-	mutex_unlock(&indio_dev->mlock);
-
-	return ret ? ret : len;
-}
-
 /* Power down the device */
 static int adis16260_stop_device(struct iio_dev *indio_dev)
 {
@@ -174,18 +115,19 @@ static int adis16260_stop_device(struct iio_dev *indio_dev)
 	return ret;
 }
 
-static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
-		adis16260_read_frequency,
-		adis16260_write_frequency);
-
 static const struct iio_chan_spec adis16260_channels[] = {
 	ADIS_GYRO_CHAN(X, ADIS16260_GYRO_OUT, ADIS16260_SCAN_GYRO,
 		BIT(IIO_CHAN_INFO_CALIBBIAS) |
-		BIT(IIO_CHAN_INFO_CALIBSCALE), 14),
-	ADIS_INCLI_CHAN(X, ADIS16260_ANGL_OUT, ADIS16260_SCAN_ANGL, 0, 14),
-	ADIS_TEMP_CHAN(ADIS16260_TEMP_OUT, ADIS16260_SCAN_TEMP, 12),
-	ADIS_SUPPLY_CHAN(ADIS16260_SUPPLY_OUT, ADIS16260_SCAN_SUPPLY, 12),
-	ADIS_AUX_ADC_CHAN(ADIS16260_AUX_ADC, ADIS16260_SCAN_AUX_ADC, 12),
+		BIT(IIO_CHAN_INFO_CALIBSCALE),
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 14),
+	ADIS_INCLI_CHAN(X, ADIS16260_ANGL_OUT, ADIS16260_SCAN_ANGL, 0,
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 14),
+	ADIS_TEMP_CHAN(ADIS16260_TEMP_OUT, ADIS16260_SCAN_TEMP,
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
+	ADIS_SUPPLY_CHAN(ADIS16260_SUPPLY_OUT, ADIS16260_SCAN_SUPPLY,
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
+	ADIS_AUX_ADC_CHAN(ADIS16260_AUX_ADC, ADIS16260_SCAN_AUX_ADC,
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
 	IIO_CHAN_SOFT_TIMESTAMP(5),
 };
 
@@ -258,6 +200,20 @@ static int adis16260_read_raw(struct iio_dev *indio_dev,
 
 		*val = val16;
 		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = adis_read_reg_16(adis, ADIS16260_SMPL_PRD, &val16);
+		if (ret)
+			return ret;
+
+		if (spi_get_device_id(adis->spi)->driver_data)
+		/* If an adis16251 */
+			*val = (val16 & ADIS16260_SMPL_PRD_TIME_BASE) ?
+				8 : 256;
+		else
+			*val = (val16 & ADIS16260_SMPL_PRD_TIME_BASE) ?
+				66 : 2048;
+		*val /= (val16 & ADIS16260_SMPL_PRD_DIV_MASK) + 1;
+		return IIO_VAL_INT;
 	}
 	return -EINVAL;
 }
@@ -269,7 +225,9 @@ static int adis16260_write_raw(struct iio_dev *indio_dev,
 			       long mask)
 {
 	struct adis *adis = iio_priv(indio_dev);
+	int ret;
 	u8 addr;
+	u8 t;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_CALIBBIAS:
@@ -284,21 +242,31 @@ static int adis16260_write_raw(struct iio_dev *indio_dev,
 
 		addr = adis16260_addresses[chan->scan_index][1];
 		return adis_write_reg_16(adis, addr, val);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		mutex_lock(&indio_dev->mlock);
+		if (spi_get_device_id(adis->spi)->driver_data)
+			t = 256 / val;
+		else
+			t = 2048 / val;
+
+		if (t > ADIS16260_SMPL_PRD_DIV_MASK)
+			t = ADIS16260_SMPL_PRD_DIV_MASK;
+		else if (t > 0)
+			t--;
+
+		if (t >= 0x0A)
+			adis->spi->max_speed_hz = ADIS16260_SPI_SLOW;
+		else
+			adis->spi->max_speed_hz = ADIS16260_SPI_FAST;
+		ret = adis_write_reg_8(adis, ADIS16260_SMPL_PRD, t);
+
+		mutex_unlock(&indio_dev->mlock);
+		return ret;
 	}
 	return -EINVAL;
 }
 
-static struct attribute *adis16260_attributes[] = {
-	&iio_dev_attr_sampling_frequency.dev_attr.attr,
-	NULL
-};
-
-static const struct attribute_group adis16260_attribute_group = {
-	.attrs = adis16260_attributes,
-};
-
 static const struct iio_info adis16260_info = {
-	.attrs = &adis16260_attribute_group,
 	.read_raw = &adis16260_read_raw,
 	.write_raw = &adis16260_write_raw,
 	.update_scan_mode = adis_update_scan_mode,

drivers/iio/gyro/itg3200_core.c

@@ -90,6 +90,7 @@ static int itg3200_read_raw(struct iio_dev *indio_dev,
 {
 	int ret = 0;
 	u8 reg;
+	u8 regval;
 
 	switch (info) {
 	case IIO_CHAN_INFO_RAW:
@@ -107,65 +108,60 @@ static int itg3200_read_raw(struct iio_dev *indio_dev,
 		/* Only the temperature channel has an offset */
 		*val = 23000;
 		return IIO_VAL_INT;
-	default:
-		return -EINVAL;
-	}
-}
-
-static ssize_t itg3200_read_frequency(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	int ret, sps;
-	u8 val;
-
-	ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val);
-	if (ret)
-		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &regval);
+		if (ret)
+			return ret;
 
-	sps = (val & ITG3200_DLPF_CFG_MASK) ? 1000 : 8000;
+		*val = (regval & ITG3200_DLPF_CFG_MASK) ? 1000 : 8000;
 
-	ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_SAMPLE_RATE_DIV, &val);
-	if (ret)
-		return ret;
+		ret = itg3200_read_reg_8(indio_dev,
+					 ITG3200_REG_SAMPLE_RATE_DIV,
+					 &regval);
+		if (ret)
+			return ret;
 
-	sps /= val + 1;
+		*val /= regval + 1;
+		return IIO_VAL_INT;
 
-	return sprintf(buf, "%d\n", sps);
+	default:
+		return -EINVAL;
+	}
 }
 
-static ssize_t itg3200_write_frequency(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t len)
+static int itg3200_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val,
+			     int val2,
+			     long mask)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	unsigned val;
 	int ret;
 	u8 t;
 
-	ret = kstrtouint(buf, 10, &val);
-	if (ret)
-		return ret;
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val == 0 || val2 != 0)
+			return -EINVAL;
 
-	mutex_lock(&indio_dev->mlock);
+		mutex_lock(&indio_dev->mlock);
 
-	ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &t);
-	if (ret)
-		goto err_ret;
+		ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &t);
+		if (ret) {
+			mutex_unlock(&indio_dev->mlock);
+			return ret;
+		}
+		t = ((t & ITG3200_DLPF_CFG_MASK) ? 1000u : 8000u) / val - 1;
 
-	if (val == 0) {
-		ret = -EINVAL;
-		goto err_ret;
-	}
-	t = ((t & ITG3200_DLPF_CFG_MASK) ? 1000u : 8000u) / val - 1;
+		ret = itg3200_write_reg_8(indio_dev,
+					  ITG3200_REG_SAMPLE_RATE_DIV,
+					  t);
 
-	ret = itg3200_write_reg_8(indio_dev, ITG3200_REG_SAMPLE_RATE_DIV, t);
-
-err_ret:
-	mutex_unlock(&indio_dev->mlock);
+		mutex_unlock(&indio_dev->mlock);
+	return ret;
 
-	return ret ? ret : len;
+	default:
+		return -EINVAL;
+	}
 }
 
 /*
@@ -255,6 +251,7 @@ static int itg3200_initial_setup(struct iio_dev *indio_dev)
 	.channel2 = IIO_MOD_ ## _mod, \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 	.address = ITG3200_REG_GYRO_ ## _mod ## OUT_H, \
 	.scan_index = ITG3200_SCAN_GYRO_ ## _mod, \
 	.scan_type = ITG3200_ST, \
@@ -267,6 +264,7 @@ static const struct iio_chan_spec itg3200_channels[] = {
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
 		BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.address = ITG3200_REG_TEMP_OUT_H,
 		.scan_index = ITG3200_SCAN_TEMP,
 		.scan_type = ITG3200_ST,
@@ -277,22 +275,9 @@ static const struct iio_chan_spec itg3200_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(ITG3200_SCAN_ELEMENTS),
 };
 
-/* IIO device attributes */
-static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, itg3200_read_frequency,
-		itg3200_write_frequency);
-
-static struct attribute *itg3200_attributes[] = {
-	&iio_dev_attr_sampling_frequency.dev_attr.attr,
-	NULL
-};
-
-static const struct attribute_group itg3200_attribute_group = {
-	.attrs = itg3200_attributes,
-};
-
 static const struct iio_info itg3200_info = {
-	.attrs = &itg3200_attribute_group,
 	.read_raw = &itg3200_read_raw,
+	.write_raw = &itg3200_write_raw,
 	.driver_module = THIS_MODULE,
 };
 

drivers/iio/gyro/st_gyro_core.c

@@ -245,6 +245,9 @@ static int st_gyro_read_raw(struct iio_dev *indio_dev,
 		*val = 0;
 		*val2 = gdata->current_fullscale->gain;
 		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = gdata->odr;
+		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
 	}
@@ -262,6 +265,13 @@ static int st_gyro_write_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SCALE:
 		err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
 		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2)
+			return -EINVAL;
+		mutex_lock(&indio_dev->mlock);
+		err = st_sensors_set_odr(indio_dev, val);
+		mutex_unlock(&indio_dev->mlock);
+		return err;
 	default:
 		err = -EINVAL;
 	}
@@ -269,14 +279,12 @@ static int st_gyro_write_raw(struct iio_dev *indio_dev,
 	return err;
 }
 
-static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
 static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
 static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_anglvel_scale_available);
 
 static struct attribute *st_gyro_attributes[] = {
 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 	&iio_dev_attr_in_anglvel_scale_available.dev_attr.attr,
-	&iio_dev_attr_sampling_frequency.dev_attr.attr,
 	NULL,
 };
 

drivers/iio/gyro/st_gyro_i2c.c

@@ -18,6 +18,43 @@
 #include <linux/iio/common/st_sensors_i2c.h>
 #include "st_gyro.h"
 
+#ifdef CONFIG_OF
+static const struct of_device_id st_gyro_of_match[] = {
+	{
+		.compatible = "st,l3g4200d-gyro",
+		.data = L3G4200D_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330d-gyro",
+		.data = LSM330D_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dl-gyro",
+		.data = LSM330DL_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dlc-gyro",
+		.data = LSM330DLC_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,l3gd20-gyro",
+		.data = L3GD20_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,l3g4is-gyro",
+		.data = L3G4IS_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330-gyro",
+		.data = LSM330_GYRO_DEV_NAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_gyro_of_match);
+#else
+#define st_gyro_of_match NULL
+#endif
+
 static int st_gyro_i2c_probe(struct i2c_client *client,
 						const struct i2c_device_id *id)
 {
@@ -31,6 +68,7 @@ static int st_gyro_i2c_probe(struct i2c_client *client,
 
 	gdata = iio_priv(indio_dev);
 	gdata->dev = &client->dev;
+	st_sensors_of_i2c_probe(client, st_gyro_of_match);
 
 	st_sensors_i2c_configure(indio_dev, client, gdata);
 
@@ -65,6 +103,7 @@ static struct i2c_driver st_gyro_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = "st-gyro-i2c",
+		.of_match_table = of_match_ptr(st_gyro_of_match),
 	},
 	.probe = st_gyro_i2c_probe,
 	.remove = st_gyro_i2c_remove,

drivers/iio/imu/adis16400_buffer.c

@@ -18,7 +18,7 @@ int adis16400_update_scan_mode(struct iio_dev *indio_dev,
 {
 	struct adis16400_state *st = iio_priv(indio_dev);
 	struct adis *adis = &st->adis;
-	uint16_t *tx, *rx;
+	uint16_t *tx;
 
 	if (st->variant->flags & ADIS16400_NO_BURST)
 		return adis_update_scan_mode(indio_dev, scan_mask);
@@ -35,7 +35,6 @@ int adis16400_update_scan_mode(struct iio_dev *indio_dev,
 	if (!adis->buffer)
 		return -ENOMEM;
 
-	rx = adis->buffer;
 	tx = adis->buffer + indio_dev->scan_bytes;
 
 	tx[0] = ADIS_READ_REG(ADIS16400_GLOB_CMD);

drivers/iio/imu/adis16400_core.c

@@ -214,21 +214,6 @@ static int adis16400_set_freq(struct adis16400_state *st, unsigned int freq)
 	return adis_write_reg_8(&st->adis, ADIS16400_SMPL_PRD, val);
 }
 
-static ssize_t adis16400_read_frequency(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct adis16400_state *st = iio_priv(indio_dev);
-	int ret;
-
-	ret = st->variant->get_freq(st);
-	if (ret < 0)
-		return ret;
-
-	return sprintf(buf, "%d.%.3d\n", ret / 1000, ret % 1000);
-}
-
 static const unsigned adis16400_3db_divisors[] = {
 	[0] = 2, /* Special case */
 	[1] = 6,
@@ -260,30 +245,6 @@ static int adis16400_set_filter(struct iio_dev *indio_dev, int sps, int val)
 	return ret;
 }
 
-static ssize_t adis16400_write_frequency(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct adis16400_state *st = iio_priv(indio_dev);
-	int i, f, val;
-	int ret;
-
-	ret = iio_str_to_fixpoint(buf, 100, &i, &f);
-	if (ret)
-		return ret;
-
-	val = i * 1000 + f;
-
-	if (val <= 0)
-		return -EINVAL;
-
-	mutex_lock(&indio_dev->mlock);
-	st->variant->set_freq(st, val);
-	mutex_unlock(&indio_dev->mlock);
-
-	return len;
-}
-
 /* Power down the device */
 static int adis16400_stop_device(struct iio_dev *indio_dev)
 {
@@ -350,10 +311,6 @@ static int adis16400_initial_setup(struct iio_dev *indio_dev)
 	return ret;
 }
 
-static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
-			      adis16400_read_frequency,
-			      adis16400_write_frequency);
-
 static const uint8_t adis16400_addresses[] = {
 	[ADIS16400_SCAN_GYRO_X] = ADIS16400_XGYRO_OFF,
 	[ADIS16400_SCAN_GYRO_Y] = ADIS16400_YGYRO_OFF,
@@ -394,6 +351,16 @@ static int adis16400_write_raw(struct iio_dev *indio_dev,
 			val * 1000 + val2 / 1000);
 		mutex_unlock(&indio_dev->mlock);
 		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		sps = val * 1000 + val2 / 1000;
+
+		if (sps <= 0)
+			return -EINVAL;
+
+		mutex_lock(&indio_dev->mlock);
+		ret = st->variant->set_freq(st, sps);
+		mutex_unlock(&indio_dev->mlock);
+		return ret;
 	default:
 		return -EINVAL;
 	}
@@ -474,6 +441,13 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 		if (ret < 0)
 			return ret;
 		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = st->variant->get_freq(st);
+		if (ret < 0)
+			return ret;
+		*val = ret / 1000;
+		*val2 = (ret % 1000) * 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
 	default:
 		return -EINVAL;
 	}
@@ -486,6 +460,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 	.extend_name = name, \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
 		BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 	.address = (addr), \
 	.scan_index = (si), \
 	.scan_type = { \
@@ -511,6 +486,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 		BIT(IIO_CHAN_INFO_CALIBBIAS),		  \
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
 		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 	.address = addr, \
 	.scan_index = ADIS16400_SCAN_GYRO_ ## mod, \
 	.scan_type = { \
@@ -530,6 +506,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 		BIT(IIO_CHAN_INFO_CALIBBIAS), \
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
 		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 	.address = (addr), \
 	.scan_index = ADIS16400_SCAN_ACC_ ## mod, \
 	.scan_type = { \
@@ -548,6 +525,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
 		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 	.address = (addr), \
 	.scan_index = ADIS16400_SCAN_MAGN_ ## mod, \
 	.scan_type = { \
@@ -573,6 +551,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 		BIT(IIO_CHAN_INFO_SCALE), \
 	.info_mask_shared_by_type = \
 		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 	.address = (addr), \
 	.scan_index = ADIS16350_SCAN_TEMP_ ## mod, \
 	.scan_type = { \
@@ -591,6 +570,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
 		BIT(IIO_CHAN_INFO_OFFSET) | \
 		BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 	.address = (addr), \
 	.scan_index = ADIS16350_SCAN_TEMP_X, \
 	.scan_type = { \
@@ -608,6 +588,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 	.channel2 = IIO_MOD_ ## mod, \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 	.address = (addr), \
 	.scan_index = ADIS16300_SCAN_INCLI_ ## mod, \
 	.scan_type = { \
@@ -649,6 +630,7 @@ static const struct iio_chan_spec adis16448_channels[] = {
 		.type = IIO_PRESSURE,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.address = ADIS16448_BARO_OUT,
 		.scan_index = ADIS16400_SCAN_BARO,
 		.scan_type = {
@@ -704,15 +686,6 @@ static const struct iio_chan_spec adis16334_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
 };
 
-static struct attribute *adis16400_attributes[] = {
-	&iio_dev_attr_sampling_frequency.dev_attr.attr,
-	NULL
-};
-
-static const struct attribute_group adis16400_attribute_group = {
-	.attrs = adis16400_attributes,
-};
-
 static struct adis16400_chip_info adis16400_chips[] = {
 	[ADIS16300] = {
 		.channels = adis16300_channels,
@@ -813,7 +786,6 @@ static const struct iio_info adis16400_info = {
 	.driver_module = THIS_MODULE,
 	.read_raw = &adis16400_read_raw,
 	.write_raw = &adis16400_write_raw,
-	.attrs = &adis16400_attribute_group,
 	.update_scan_mode = adis16400_update_scan_mode,
 	.debugfs_reg_access = adis_debugfs_reg_access,
 };

drivers/iio/imu/adis16480.c

@@ -257,11 +257,16 @@ static int adis16480_debugfs_init(struct iio_dev *indio_dev)
 
 #endif
 
-static int adis16480_set_freq(struct adis16480 *st, unsigned int freq)
+static int adis16480_set_freq(struct iio_dev *indio_dev, int val, int val2)
 {
+	struct adis16480 *st = iio_priv(indio_dev);
 	unsigned int t;
 
-	t = 2460000 / freq;
+	t =  val * 1000 + val2 / 1000;
+	if (t <= 0)
+		return -EINVAL;
+
+	t = 2460000 / t;
 	if (t > 2048)
 		t = 2048;
 
@@ -271,65 +276,24 @@ static int adis16480_set_freq(struct adis16480 *st, unsigned int freq)
 	return adis_write_reg_16(&st->adis, ADIS16480_REG_DEC_RATE, t);
 }
 
-static int adis16480_get_freq(struct adis16480 *st, unsigned int *freq)
+static int adis16480_get_freq(struct iio_dev *indio_dev, int *val, int *val2)
 {
+	struct adis16480 *st = iio_priv(indio_dev);
 	uint16_t t;
 	int ret;
+	unsigned freq;
 
 	ret = adis_read_reg_16(&st->adis, ADIS16480_REG_DEC_RATE, &t);
 	if (ret < 0)
 		return ret;
 
-	*freq = 2460000 / (t + 1);
+	freq = 2460000 / (t + 1);
+	*val = freq / 1000;
+	*val2 = (freq % 1000) * 1000;
 
-	return 0;
+	return IIO_VAL_INT_PLUS_MICRO;
 }
 
-static ssize_t adis16480_read_frequency(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct adis16480 *st = iio_priv(indio_dev);
-	unsigned int freq;
-	int ret;
-
-	ret = adis16480_get_freq(st, &freq);
-	if (ret < 0)
-		return ret;
-
-	return sprintf(buf, "%d.%.3d\n", freq / 1000, freq % 1000);
-}
-
-static ssize_t adis16480_write_frequency(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t len)
-{
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct adis16480 *st = iio_priv(indio_dev);
-	int freq_int, freq_fract;
-	long val;
-	int ret;
-
-	ret = iio_str_to_fixpoint(buf, 100, &freq_int, &freq_fract);
-	if (ret)
-		return ret;
-
-	val = freq_int * 1000 + freq_fract;
-
-	if (val <= 0)
-		return -EINVAL;
-
-	ret = adis16480_set_freq(st, val);
-
-	return ret ? ret : len;
-}
-
-static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
-			      adis16480_read_frequency,
-			      adis16480_write_frequency);
-
 enum {
 	ADIS16480_SCAN_GYRO_X,
 	ADIS16480_SCAN_GYRO_Y,
@@ -571,6 +535,8 @@ static int adis16480_read_raw(struct iio_dev *indio_dev,
 		return adis16480_get_calibscale(indio_dev, chan, val);
 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
 		return adis16480_get_filter_freq(indio_dev, chan, val);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return adis16480_get_freq(indio_dev, val, val2);
 	default:
 		return -EINVAL;
 	}
@@ -586,6 +552,9 @@ static int adis16480_write_raw(struct iio_dev *indio_dev,
 		return adis16480_set_calibscale(indio_dev, chan, val);
 	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
 		return adis16480_set_filter_freq(indio_dev, chan, val);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return adis16480_set_freq(indio_dev, val, val2);
+
 	default:
 		return -EINVAL;
 	}
@@ -600,6 +569,7 @@ static int adis16480_write_raw(struct iio_dev *indio_dev,
 			BIT(IIO_CHAN_INFO_CALIBBIAS) | \
 			_info_sep, \
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 		.address = (_address), \
 		.scan_index = (_si), \
 		.scan_type = { \
@@ -638,6 +608,7 @@ static int adis16480_write_raw(struct iio_dev *indio_dev,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
 			BIT(IIO_CHAN_INFO_CALIBBIAS) | \
 			BIT(IIO_CHAN_INFO_SCALE), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 		.address = ADIS16480_REG_BAROM_OUT, \
 		.scan_index = ADIS16480_SCAN_BARO, \
 		.scan_type = { \
@@ -655,6 +626,7 @@ static int adis16480_write_raw(struct iio_dev *indio_dev,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
 			BIT(IIO_CHAN_INFO_SCALE) | \
 			BIT(IIO_CHAN_INFO_OFFSET), \
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 		.address = ADIS16480_REG_TEMP_OUT, \
 		.scan_index = ADIS16480_SCAN_TEMP, \
 		.scan_type = { \
@@ -717,17 +689,7 @@ static const struct adis16480_chip_info adis16480_chip_info[] = {
 	},
 };
 
-static struct attribute *adis16480_attributes[] = {
-	&iio_dev_attr_sampling_frequency.dev_attr.attr,
-	NULL
-};
-
-static const struct attribute_group adis16480_attribute_group = {
-	.attrs = adis16480_attributes,
-};
-
 static const struct iio_info adis16480_info = {
-	.attrs = &adis16480_attribute_group,
 	.read_raw = &adis16480_read_raw,
 	.write_raw = &adis16480_write_raw,
 	.update_scan_mode = adis_update_scan_mode,

drivers/iio/industrialio-event.c

@@ -209,6 +209,7 @@ static const char * const iio_ev_info_text[] = {
 	[IIO_EV_INFO_ENABLE] = "en",
 	[IIO_EV_INFO_VALUE] = "value",
 	[IIO_EV_INFO_HYSTERESIS] = "hysteresis",
+	[IIO_EV_INFO_PERIOD] = "period",
 };
 
 static enum iio_event_direction iio_ev_attr_dir(struct iio_dev_attr *attr)

drivers/iio/light/Kconfig

@@ -62,6 +62,18 @@ config GP2AP020A00F
 	  To compile this driver as a module, choose M here: the
 	  module will be called gp2ap020a00f.
 
+config ISL29125
+	tristate "Intersil ISL29125 digital color light sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here if you want to build a driver for the Intersil ISL29125
+	  RGB light sensor for I2C.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called isl29125.
+
 config HID_SENSOR_ALS
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
@@ -116,6 +128,18 @@ config LTR501
 	 This driver can also be built as a module.  If so, the module
          will be called ltr501.
 
+config TCS3414
+	tristate "TAOS TCS3414 digital color sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	 If you say yes here you get support for the TAOS TCS3414
+	 family of digital color sensors.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called tcs3414.
+
 config TCS3472
 	tristate "TAOS TCS3472 color light-to-digital converter"
 	depends on I2C

drivers/iio/light/Makefile

@@ -10,9 +10,11 @@ obj-$(CONFIG_CM36651)		+= cm36651.o
 obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
 obj-$(CONFIG_HID_SENSOR_PROX)	+= hid-sensor-prox.o
+obj-$(CONFIG_ISL29125)		+= isl29125.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
 obj-$(CONFIG_LTR501)		+= ltr501.o
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
+obj-$(CONFIG_TCS3414)		+= tcs3414.o
 obj-$(CONFIG_TCS3472)		+= tcs3472.o
 obj-$(CONFIG_TSL4531)		+= tsl4531.o
 obj-$(CONFIG_VCNL4000)		+= vcnl4000.o

drivers/iio/light/isl29125.c

+/*
+ * isl29125.c - Support for Intersil ISL29125 RGB light sensor
+ *
+ * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * RGB light sensor with 16-bit channels for red, green, blue);
+ * 7-bit I2C slave address 0x44
+ *
+ * TODO: interrupt support, IR compensation, thresholds, 12bit
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define ISL29125_DRV_NAME "isl29125"
+
+#define ISL29125_DEVICE_ID 0x00
+#define ISL29125_CONF1 0x01
+#define ISL29125_CONF2 0x02
+#define ISL29125_CONF3 0x03
+#define ISL29125_STATUS 0x08
+#define ISL29125_GREEN_DATA 0x09
+#define ISL29125_RED_DATA 0x0b
+#define ISL29125_BLUE_DATA 0x0d
+
+#define ISL29125_ID 0x7d
+
+#define ISL29125_MODE_MASK GENMASK(2, 0)
+#define ISL29125_MODE_PD 0x0
+#define ISL29125_MODE_G 0x1
+#define ISL29125_MODE_R 0x2
+#define ISL29125_MODE_B 0x3
+#define ISL29125_MODE_RGB 0x5
+
+#define ISL29125_MODE_RANGE BIT(3)
+
+#define ISL29125_STATUS_CONV BIT(1)
+
+struct isl29125_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 conf1;
+	u16 buffer[8]; /* 3x 16-bit, padding, 8 bytes timestamp */
+};
+
+#define ISL29125_CHANNEL(_color, _si) { \
+	.type = IIO_INTENSITY, \
+	.modified = 1, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.channel2 = IIO_MOD_LIGHT_##_color, \
+	.scan_index = _si, \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = 16, \
+		.storagebits = 16, \
+		.endianness = IIO_CPU, \
+	}, \
+}
+
+static const struct iio_chan_spec isl29125_channels[] = {
+	ISL29125_CHANNEL(GREEN, 0),
+	ISL29125_CHANNEL(RED, 1),
+	ISL29125_CHANNEL(BLUE, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const struct {
+	u8 mode, data;
+} isl29125_regs[] = {
+	{ISL29125_MODE_G, ISL29125_GREEN_DATA},
+	{ISL29125_MODE_R, ISL29125_RED_DATA},
+	{ISL29125_MODE_B, ISL29125_BLUE_DATA},
+};
+
+static int isl29125_read_data(struct isl29125_data *data, int si)
+{
+	int tries = 5;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+		data->conf1 | isl29125_regs[si].mode);
+	if (ret < 0)
+		return ret;
+
+	msleep(101);
+
+	while (tries--) {
+		ret = i2c_smbus_read_byte_data(data->client, ISL29125_STATUS);
+		if (ret < 0)
+			goto fail;
+		if (ret & ISL29125_STATUS_CONV)
+			break;
+		msleep(20);
+	}
+
+	if (tries < 0) {
+		dev_err(&data->client->dev, "data not ready\n");
+		ret = -EIO;
+		goto fail;
+	}
+
+	ret = i2c_smbus_read_word_data(data->client, isl29125_regs[si].data);
+
+fail:
+	i2c_smbus_write_byte_data(data->client, ISL29125_CONF1, data->conf1);
+	return ret;
+}
+
+static int isl29125_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct isl29125_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (iio_buffer_enabled(indio_dev))
+			return -EBUSY;
+		mutex_lock(&data->lock);
+		ret = isl29125_read_data(data, chan->scan_index);
+		mutex_unlock(&data->lock);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		if (data->conf1 & ISL29125_MODE_RANGE)
+			*val2 = 152590; /* 10k lux full range */
+		else
+			*val2 = 5722; /* 375 lux full range */
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+	return -EINVAL;
+}
+
+static int isl29125_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
+{
+	struct isl29125_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		if (val != 0)
+			return -EINVAL;
+		if (val2 == 152590)
+			data->conf1 |= ISL29125_MODE_RANGE;
+		else if (val2 == 5722)
+			data->conf1 &= ~ISL29125_MODE_RANGE;
+		else
+			return -EINVAL;
+		return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+			data->conf1);
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t isl29125_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct isl29125_data *data = iio_priv(indio_dev);
+	int i, j = 0;
+
+	for_each_set_bit(i, indio_dev->active_scan_mask,
+		indio_dev->masklength) {
+		int ret = i2c_smbus_read_word_data(data->client,
+			isl29125_regs[i].data);
+		if (ret < 0)
+			goto done;
+
+		data->buffer[j++] = ret;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+		iio_get_time_ns());
+
+done:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_info isl29125_info = {
+	.read_raw = isl29125_read_raw,
+	.write_raw = isl29125_write_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static int isl29125_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct isl29125_data *data = iio_priv(indio_dev);
+
+	data->conf1 |= ISL29125_MODE_RGB;
+	return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+		data->conf1);
+}
+
+static int isl29125_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct isl29125_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = iio_triggered_buffer_predisable(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	data->conf1 &= ~ISL29125_MODE_MASK;
+	data->conf1 |= ISL29125_MODE_PD;
+	return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+		data->conf1);
+}
+
+static const struct iio_buffer_setup_ops isl29125_buffer_setup_ops = {
+	.preenable = isl29125_buffer_preenable,
+	.postenable = &iio_triggered_buffer_postenable,
+	.predisable = isl29125_buffer_predisable,
+};
+
+static int isl29125_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct isl29125_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &isl29125_info;
+	indio_dev->name = ISL29125_DRV_NAME;
+	indio_dev->channels = isl29125_channels;
+	indio_dev->num_channels = ARRAY_SIZE(isl29125_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = i2c_smbus_read_byte_data(data->client, ISL29125_DEVICE_ID);
+	if (ret < 0)
+		return ret;
+	if (ret != ISL29125_ID)
+		return -ENODEV;
+
+	data->conf1 = ISL29125_MODE_PD | ISL29125_MODE_RANGE;
+	ret = i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+		data->conf1);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(data->client, ISL29125_STATUS, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+		isl29125_trigger_handler, &isl29125_buffer_setup_ops);
+	if (ret < 0)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto buffer_cleanup;
+
+	return 0;
+
+buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+	return ret;
+}
+
+static int isl29125_powerdown(struct isl29125_data *data)
+{
+	return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+		(data->conf1 & ~ISL29125_MODE_MASK) | ISL29125_MODE_PD);
+}
+
+static int isl29125_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	isl29125_powerdown(iio_priv(indio_dev));
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int isl29125_suspend(struct device *dev)
+{
+	struct isl29125_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
+	return isl29125_powerdown(data);
+}
+
+static int isl29125_resume(struct device *dev)
+{
+	struct isl29125_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
+	return i2c_smbus_write_byte_data(data->client, ISL29125_CONF1,
+		data->conf1);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(isl29125_pm_ops, isl29125_suspend, isl29125_resume);
+
+static const struct i2c_device_id isl29125_id[] = {
+	{ "isl29125", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, isl29125_id);
+
+static struct i2c_driver isl29125_driver = {
+	.driver = {
+		.name	= ISL29125_DRV_NAME,
+		.pm	= &isl29125_pm_ops,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= isl29125_probe,
+	.remove		= isl29125_remove,
+	.id_table	= isl29125_id,
+};
+module_i2c_driver(isl29125_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("ISL29125 RGB light sensor driver");
+MODULE_LICENSE("GPL");

drivers/iio/magnetometer/st_magn_core.c

@@ -299,6 +299,9 @@ static int st_magn_read_raw(struct iio_dev *indio_dev,
 		else
 			*val2 = mdata->current_fullscale->gain;
 		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = mdata->odr;
+		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
 	}
@@ -316,6 +319,13 @@ static int st_magn_write_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SCALE:
 		err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
 		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2)
+			return -EINVAL;
+		mutex_lock(&indio_dev->mlock);
+		err = st_sensors_set_odr(indio_dev, val);
+		mutex_unlock(&indio_dev->mlock);
+		return err;
 	default:
 		err = -EINVAL;
 	}
@@ -323,14 +333,12 @@ static int st_magn_write_raw(struct iio_dev *indio_dev,
 	return err;
 }
 
-static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
 static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
 static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_magn_scale_available);
 
 static struct attribute *st_magn_attributes[] = {
 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 	&iio_dev_attr_in_magn_scale_available.dev_attr.attr,
-	&iio_dev_attr_sampling_frequency.dev_attr.attr,
 	NULL,
 };
 

drivers/iio/magnetometer/st_magn_i2c.c

@@ -18,6 +18,27 @@
 #include <linux/iio/common/st_sensors_i2c.h>
 #include "st_magn.h"
 
+#ifdef CONFIG_OF
+static const struct of_device_id st_magn_of_match[] = {
+	{
+		.compatible = "st,lsm303dlhc-magn",
+		.data = LSM303DLHC_MAGN_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm303dlm-magn",
+		.data = LSM303DLM_MAGN_DEV_NAME,
+	},
+	{
+		.compatible = "st,lis3mdl-magn",
+		.data = LIS3MDL_MAGN_DEV_NAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_magn_of_match);
+#else
+#define st_magn_of_match NULL
+#endif
+
 static int st_magn_i2c_probe(struct i2c_client *client,
 						const struct i2c_device_id *id)
 {
@@ -31,6 +52,7 @@ static int st_magn_i2c_probe(struct i2c_client *client,
 
 	mdata = iio_priv(indio_dev);
 	mdata->dev = &client->dev;
+	st_sensors_of_i2c_probe(client, st_magn_of_match);
 
 	st_sensors_i2c_configure(indio_dev, client, mdata);
 
@@ -61,6 +83,7 @@ static struct i2c_driver st_magn_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = "st-magn-i2c",
+		.of_match_table = of_match_ptr(st_magn_of_match),
 	},
 	.probe = st_magn_i2c_probe,
 	.remove = st_magn_i2c_remove,

drivers/iio/pressure/st_pressure_core.c

@@ -307,6 +307,27 @@ static const struct st_sensors st_press_sensors[] = {
 	},
 };
 
+static int st_press_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *ch,
+			      int val,
+			      int val2,
+			      long mask)
+{
+	int err;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2)
+			return -EINVAL;
+		mutex_lock(&indio_dev->mlock);
+		err = st_sensors_set_odr(indio_dev, val);
+		mutex_unlock(&indio_dev->mlock);
+		return err;
+	default:
+		return -EINVAL;
+	}
+}
+
 static int st_press_read_raw(struct iio_dev *indio_dev,
 			struct iio_chan_spec const *ch, int *val,
 							int *val2, long mask)
@@ -349,6 +370,9 @@ static int st_press_read_raw(struct iio_dev *indio_dev,
 		}
 
 		return IIO_VAL_FRACTIONAL;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = pdata->odr;
+		return IIO_VAL_INT;
 	default:
 		return -EINVAL;
 	}
@@ -357,12 +381,10 @@ static int st_press_read_raw(struct iio_dev *indio_dev,
 	return err;
 }
 
-static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
 static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
 
 static struct attribute *st_press_attributes[] = {
 	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
-	&iio_dev_attr_sampling_frequency.dev_attr.attr,
 	NULL,
 };
 
@@ -374,6 +396,7 @@ static const struct iio_info press_info = {
 	.driver_module = THIS_MODULE,
 	.attrs = &st_press_attribute_group,
 	.read_raw = &st_press_read_raw,
+	.write_raw = &st_press_write_raw,
 };
 
 #ifdef CONFIG_IIO_TRIGGER

drivers/iio/pressure/st_pressure_i2c.c

@@ -18,6 +18,27 @@
 #include <linux/iio/common/st_sensors_i2c.h>
 #include "st_pressure.h"
 
+#ifdef CONFIG_OF
+static const struct of_device_id st_press_of_match[] = {
+	{
+		.compatible = "st,lps001wp-press",
+		.data = LPS001WP_PRESS_DEV_NAME,
+	},
+	{
+		.compatible = "st,lps25h-press",
+		.data = LPS25H_PRESS_DEV_NAME,
+	},
+	{
+		.compatible = "st,lps331ap-press",
+		.data = LPS331AP_PRESS_DEV_NAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_press_of_match);
+#else
+#define st_press_of_match NULL
+#endif
+
 static int st_press_i2c_probe(struct i2c_client *client,
 						const struct i2c_device_id *id)
 {
@@ -31,6 +52,7 @@ static int st_press_i2c_probe(struct i2c_client *client,
 
 	pdata = iio_priv(indio_dev);
 	pdata->dev = &client->dev;
+	st_sensors_of_i2c_probe(client, st_press_of_match);
 
 	st_sensors_i2c_configure(indio_dev, client, pdata);
 
@@ -60,6 +82,7 @@ static struct i2c_driver st_press_driver = {
 	.driver = {
 		.owner = THIS_MODULE,
 		.name = "st-press-i2c",
+		.of_match_table = of_match_ptr(st_press_of_match),
 	},
 	.probe = st_press_i2c_probe,
 	.remove = st_press_i2c_remove,

drivers/staging/iio/Documentation/iio_event_monitor.c

@@ -122,8 +122,6 @@ static bool event_is_known(struct iio_event_data *event)
 	case IIO_MOD_LIGHT_IR:
 	case IIO_MOD_ROOT_SUM_SQUARED_X_Y:
 	case IIO_MOD_SUM_SQUARED_X_Y_Z:
-	case IIO_MOD_LIGHT_BOTH:
-	case IIO_MOD_LIGHT_IR:
 	case IIO_MOD_LIGHT_CLEAR:
 	case IIO_MOD_LIGHT_RED:
 	case IIO_MOD_LIGHT_GREEN:

drivers/staging/iio/accel/adis16201_core.c

@@ -131,17 +131,17 @@ static int adis16201_write_raw(struct iio_dev *indio_dev,
 }
 
 static const struct iio_chan_spec adis16201_channels[] = {
-	ADIS_SUPPLY_CHAN(ADIS16201_SUPPLY_OUT, ADIS16201_SCAN_SUPPLY, 12),
-	ADIS_TEMP_CHAN(ADIS16201_TEMP_OUT, ADIS16201_SCAN_TEMP, 12),
+  ADIS_SUPPLY_CHAN(ADIS16201_SUPPLY_OUT, ADIS16201_SCAN_SUPPLY, 0, 12),
+  ADIS_TEMP_CHAN(ADIS16201_TEMP_OUT, ADIS16201_SCAN_TEMP, 0, 12),
 	ADIS_ACCEL_CHAN(X, ADIS16201_XACCL_OUT, ADIS16201_SCAN_ACC_X,
-		BIT(IIO_CHAN_INFO_CALIBBIAS), 14),
+		BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
 	ADIS_ACCEL_CHAN(Y, ADIS16201_YACCL_OUT, ADIS16201_SCAN_ACC_Y,
-		BIT(IIO_CHAN_INFO_CALIBBIAS), 14),
-	ADIS_AUX_ADC_CHAN(ADIS16201_AUX_ADC, ADIS16201_SCAN_AUX_ADC, 12),
+		BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
+	ADIS_AUX_ADC_CHAN(ADIS16201_AUX_ADC, ADIS16201_SCAN_AUX_ADC, 0, 12),
 	ADIS_INCLI_CHAN(X, ADIS16201_XINCL_OUT, ADIS16201_SCAN_INCLI_X,
-		BIT(IIO_CHAN_INFO_CALIBBIAS), 14),
+		BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
 	ADIS_INCLI_CHAN(X, ADIS16201_YINCL_OUT, ADIS16201_SCAN_INCLI_Y,
-		BIT(IIO_CHAN_INFO_CALIBBIAS), 14),
+		BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
 	IIO_CHAN_SOFT_TIMESTAMP(7)
 };
 

drivers/staging/iio/accel/adis16203_core.c

@@ -99,13 +99,14 @@ static int adis16203_read_raw(struct iio_dev *indio_dev,
 }
 
 static const struct iio_chan_spec adis16203_channels[] = {
-	ADIS_SUPPLY_CHAN(ADIS16203_SUPPLY_OUT, ADIS16203_SCAN_SUPPLY, 12),
-	ADIS_AUX_ADC_CHAN(ADIS16203_AUX_ADC, ADIS16203_SCAN_AUX_ADC, 12),
+	ADIS_SUPPLY_CHAN(ADIS16203_SUPPLY_OUT, ADIS16203_SCAN_SUPPLY, 0, 12),
+	ADIS_AUX_ADC_CHAN(ADIS16203_AUX_ADC, ADIS16203_SCAN_AUX_ADC, 0, 12),
 	ADIS_INCLI_CHAN(X, ADIS16203_XINCL_OUT, ADIS16203_SCAN_INCLI_X,
-		BIT(IIO_CHAN_INFO_CALIBBIAS), 14),
+		BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
 	/* Fixme: Not what it appears to be - see data sheet */
-	ADIS_INCLI_CHAN(Y, ADIS16203_YINCL_OUT, ADIS16203_SCAN_INCLI_Y, 0, 14),
-	ADIS_TEMP_CHAN(ADIS16203_TEMP_OUT, ADIS16203_SCAN_TEMP, 12),
+	ADIS_INCLI_CHAN(Y, ADIS16203_YINCL_OUT, ADIS16203_SCAN_INCLI_Y,
+		0, 0, 14),
+	ADIS_TEMP_CHAN(ADIS16203_TEMP_OUT, ADIS16203_SCAN_TEMP, 0, 12),
 	IIO_CHAN_SOFT_TIMESTAMP(5),
 };
 

drivers/staging/iio/accel/adis16204_core.c

@@ -136,15 +136,15 @@ static int adis16204_write_raw(struct iio_dev *indio_dev,
 }
 
 static const struct iio_chan_spec adis16204_channels[] = {
-	ADIS_SUPPLY_CHAN(ADIS16204_SUPPLY_OUT, ADIS16204_SCAN_SUPPLY, 12),
-	ADIS_AUX_ADC_CHAN(ADIS16204_AUX_ADC, ADIS16204_SCAN_AUX_ADC, 12),
-	ADIS_TEMP_CHAN(ADIS16204_TEMP_OUT, ADIS16204_SCAN_TEMP, 12),
+	ADIS_SUPPLY_CHAN(ADIS16204_SUPPLY_OUT, ADIS16204_SCAN_SUPPLY, 0, 12),
+	ADIS_AUX_ADC_CHAN(ADIS16204_AUX_ADC, ADIS16204_SCAN_AUX_ADC, 0, 12),
+	ADIS_TEMP_CHAN(ADIS16204_TEMP_OUT, ADIS16204_SCAN_TEMP, 0, 12),
 	ADIS_ACCEL_CHAN(X, ADIS16204_XACCL_OUT, ADIS16204_SCAN_ACC_X,
-		BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK), 14),
+		BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK), 0, 14),
 	ADIS_ACCEL_CHAN(Y, ADIS16204_YACCL_OUT, ADIS16204_SCAN_ACC_Y,
-		BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK), 14),
+		BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK), 0, 14),
 	ADIS_ACCEL_CHAN(ROOT_SUM_SQUARED_X_Y, ADIS16204_XY_RSS_OUT,
-		ADIS16204_SCAN_ACC_XY, BIT(IIO_CHAN_INFO_PEAK), 14),
+		ADIS16204_SCAN_ACC_XY, BIT(IIO_CHAN_INFO_PEAK), 0, 14),
 	IIO_CHAN_SOFT_TIMESTAMP(5),
 };
 

drivers/staging/iio/accel/adis16209_core.c

@@ -130,16 +130,18 @@ static int adis16209_read_raw(struct iio_dev *indio_dev,
 }
 
 static const struct iio_chan_spec adis16209_channels[] = {
-	ADIS_SUPPLY_CHAN(ADIS16209_SUPPLY_OUT, ADIS16209_SCAN_SUPPLY, 14),
-	ADIS_TEMP_CHAN(ADIS16209_TEMP_OUT, ADIS16209_SCAN_TEMP, 12),
+	ADIS_SUPPLY_CHAN(ADIS16209_SUPPLY_OUT, ADIS16209_SCAN_SUPPLY, 0, 14),
+	ADIS_TEMP_CHAN(ADIS16209_TEMP_OUT, ADIS16209_SCAN_TEMP, 0, 12),
 	ADIS_ACCEL_CHAN(X, ADIS16209_XACCL_OUT, ADIS16209_SCAN_ACC_X,
-		BIT(IIO_CHAN_INFO_CALIBBIAS), 14),
+		BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
 	ADIS_ACCEL_CHAN(Y, ADIS16209_YACCL_OUT, ADIS16209_SCAN_ACC_Y,
-		BIT(IIO_CHAN_INFO_CALIBBIAS), 14),
-	ADIS_AUX_ADC_CHAN(ADIS16209_AUX_ADC, ADIS16209_SCAN_AUX_ADC, 12),
-	ADIS_INCLI_CHAN(X, ADIS16209_XINCL_OUT, ADIS16209_SCAN_INCLI_X, 0, 14),
-	ADIS_INCLI_CHAN(Y, ADIS16209_YINCL_OUT, ADIS16209_SCAN_INCLI_Y, 0, 14),
-	ADIS_ROT_CHAN(X, ADIS16209_ROT_OUT, ADIS16209_SCAN_ROT, 0, 14),
+		BIT(IIO_CHAN_INFO_CALIBBIAS), 0, 14),
+	ADIS_AUX_ADC_CHAN(ADIS16209_AUX_ADC, ADIS16209_SCAN_AUX_ADC, 0, 12),
+	ADIS_INCLI_CHAN(X, ADIS16209_XINCL_OUT, ADIS16209_SCAN_INCLI_X,
+		0, 0, 14),
+	ADIS_INCLI_CHAN(Y, ADIS16209_YINCL_OUT, ADIS16209_SCAN_INCLI_Y,
+		0, 0, 14),
+	ADIS_ROT_CHAN(X, ADIS16209_ROT_OUT, ADIS16209_SCAN_ROT, 0, 0, 14),
 	IIO_CHAN_SOFT_TIMESTAMP(8)
 };
 

drivers/staging/iio/accel/adis16240_core.c

@@ -173,15 +173,15 @@ static int adis16240_write_raw(struct iio_dev *indio_dev,
 }
 
 static const struct iio_chan_spec adis16240_channels[] = {
-	ADIS_SUPPLY_CHAN(ADIS16240_SUPPLY_OUT, ADIS16240_SCAN_SUPPLY, 10),
-	ADIS_AUX_ADC_CHAN(ADIS16240_AUX_ADC, ADIS16240_SCAN_AUX_ADC, 10),
+	ADIS_SUPPLY_CHAN(ADIS16240_SUPPLY_OUT, ADIS16240_SCAN_SUPPLY, 0, 10),
+	ADIS_AUX_ADC_CHAN(ADIS16240_AUX_ADC, ADIS16240_SCAN_AUX_ADC, 0, 10),
 	ADIS_ACCEL_CHAN(X, ADIS16240_XACCL_OUT, ADIS16240_SCAN_ACC_X,
-		BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK), 10),
+		BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK), 0, 10),
 	ADIS_ACCEL_CHAN(Y, ADIS16240_YACCL_OUT, ADIS16240_SCAN_ACC_Y,
-		BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK), 10),
+		BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK), 0, 10),
 	ADIS_ACCEL_CHAN(Z, ADIS16240_ZACCL_OUT, ADIS16240_SCAN_ACC_Z,
-		BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK), 10),
-	ADIS_TEMP_CHAN(ADIS16240_TEMP_OUT, ADIS16240_SCAN_TEMP, 10),
+		BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK), 0, 10),
+	ADIS_TEMP_CHAN(ADIS16240_TEMP_OUT, ADIS16240_SCAN_TEMP, 0, 10),
 	IIO_CHAN_SOFT_TIMESTAMP(6)
 };
 

drivers/staging/iio/adc/Kconfig

@@ -3,13 +3,6 @@
 #
 menu "Analog to digital converters"
 
-config AD7291
-	tristate "Analog Devices AD7291 ADC driver"
-	depends on I2C
-	help
-	  Say yes here to build support for Analog Devices AD7291
-	  8 Channel ADC with temperature sensor.
-
 config AD7606
 	tristate "Analog Devices AD7606 ADC driver"
 	depends on GPIOLIB
@@ -94,7 +87,7 @@ config LPC32XX_ADC
 
 config MXS_LRADC
 	tristate "Freescale i.MX23/i.MX28 LRADC"
-	depends on ARCH_MXS || COMPILE_TEST
+	depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM
 	depends on INPUT
 	select STMP_DEVICE
 	select IIO_BUFFER

drivers/staging/iio/adc/Makefile

@@ -8,7 +8,6 @@ ad7606-$(CONFIG_AD7606_IFACE_PARALLEL) += ad7606_par.o
 ad7606-$(CONFIG_AD7606_IFACE_SPI) += ad7606_spi.o
 obj-$(CONFIG_AD7606) += ad7606.o
 
-obj-$(CONFIG_AD7291) += ad7291.o
 obj-$(CONFIG_AD7780) += ad7780.o
 obj-$(CONFIG_AD7816) += ad7816.o
 obj-$(CONFIG_AD7192) += ad7192.o

drivers/staging/iio/adc/ad7606_par.c

@@ -53,7 +53,7 @@ static int ad7606_par_probe(struct platform_device *pdev)
 	struct iio_dev *indio_dev;
 	void __iomem *addr;
 	resource_size_t remap_size;
-	int ret, irq;
+	int irq;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -62,56 +62,31 @@ static int ad7606_par_probe(struct platform_device *pdev)
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
+	addr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(addr))
+		return PTR_ERR(addr);
 
 	remap_size = resource_size(res);
 
-	/* Request the regions */
-	if (!request_mem_region(res->start, remap_size, "iio-ad7606")) {
-		ret = -EBUSY;
-		goto out1;
-	}
-	addr = ioremap(res->start, remap_size);
-	if (!addr) {
-		ret = -ENOMEM;
-		goto out1;
-	}
-
 	indio_dev = ad7606_probe(&pdev->dev, irq, addr,
 			  platform_get_device_id(pdev)->driver_data,
 			  remap_size > 1 ? &ad7606_par16_bops :
 			  &ad7606_par8_bops);
 
-	if (IS_ERR(indio_dev))  {
-		ret = PTR_ERR(indio_dev);
-		goto out2;
-	}
+	if (IS_ERR(indio_dev))
+		return PTR_ERR(indio_dev);
 
 	platform_set_drvdata(pdev, indio_dev);
 
 	return 0;
-
-out2:
-	iounmap(addr);
-out1:
-	release_mem_region(res->start, remap_size);
-
-	return ret;
 }
 
 static int ad7606_par_remove(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
-	struct resource *res;
-	struct ad7606_state *st = iio_priv(indio_dev);
 
 	ad7606_remove(indio_dev, platform_get_irq(pdev, 0));
 
-	iounmap(st->base_address);
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, resource_size(res));
-
 	return 0;
 }
 

drivers/staging/iio/frequency/ad9832.c

@@ -120,7 +120,7 @@ static ssize_t ad9832_write(struct device *dev, struct device_attribute *attr,
 		ret = spi_sync(st->spi, &st->msg);
 		break;
 	case AD9832_PHASE_SYM:
-		if (val < 0 || val > 3) {
+		if (val > 3) {
 			ret = -EINVAL;
 			break;
 		}

drivers/staging/iio/trigger/iio-trig-bfin-timer.c

@@ -182,45 +182,40 @@ static int iio_bfin_tmr_trigger_probe(struct platform_device *pdev)
 	unsigned int config;
 	int ret;
 
-	st = kzalloc(sizeof(*st), GFP_KERNEL);
-	if (st == NULL) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	st = devm_kzalloc(&pdev->dev, sizeof(*st), GFP_KERNEL);
+	if (st == NULL)
+		return -ENOMEM;
 
 	st->irq = platform_get_irq(pdev, 0);
 	if (!st->irq) {
 		dev_err(&pdev->dev, "No IRQs specified");
-		ret = -ENODEV;
-		goto out1;
+		return -ENODEV;
 	}
 
 	ret = iio_bfin_tmr_get_number(st->irq);
 	if (ret < 0)
-		goto out1;
+		return ret;
 
 	st->timer_num = ret;
 	st->t = &iio_bfin_timer_code[st->timer_num];
 
 	st->trig = iio_trigger_alloc("bfintmr%d", st->timer_num);
-	if (!st->trig) {
-		ret = -ENOMEM;
-		goto out1;
-	}
+	if (!st->trig)
+		return -ENOMEM;
 
 	st->trig->ops = &iio_bfin_tmr_trigger_ops;
 	st->trig->dev.groups = iio_bfin_tmr_trigger_attr_groups;
 	iio_trigger_set_drvdata(st->trig, st);
 	ret = iio_trigger_register(st->trig);
 	if (ret)
-		goto out2;
+		goto out;
 
 	ret = request_irq(st->irq, iio_bfin_tmr_trigger_isr,
 			  0, st->trig->name, st);
 	if (ret) {
 		dev_err(&pdev->dev,
 			"request IRQ-%d failed", st->irq);
-		goto out4;
+		goto out1;
 	}
 
 	config = PWM_OUT | PERIOD_CNT | IRQ_ENA;
@@ -260,13 +255,10 @@ static int iio_bfin_tmr_trigger_probe(struct platform_device *pdev)
 	return 0;
 out_free_irq:
 	free_irq(st->irq, st);
-out4:
-	iio_trigger_unregister(st->trig);
-out2:
-	iio_trigger_put(st->trig);
 out1:
-	kfree(st);
+	iio_trigger_unregister(st->trig);
 out:
+	iio_trigger_put(st->trig);
 	return ret;
 }
 
@@ -280,7 +272,6 @@ static int iio_bfin_tmr_trigger_remove(struct platform_device *pdev)
 	free_irq(st->irq, st);
 	iio_trigger_unregister(st->trig);
 	iio_trigger_put(st->trig);
-	kfree(st);
 
 	return 0;
 }

include/linux/iio/common/st_sensors.h

@@ -47,6 +47,7 @@
 	.type = device_type, \
 	.modified = mod, \
 	.info_mask_separate = mask, \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 	.scan_index = index, \
 	.channel2 = ch2, \
 	.address = addr, \
@@ -59,11 +60,6 @@
 	}, \
 }
 
-#define ST_SENSOR_DEV_ATTR_SAMP_FREQ() \
-		IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, \
-			st_sensors_sysfs_get_sampling_frequency, \
-			st_sensors_sysfs_set_sampling_frequency)
-
 #define ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL() \
 		IIO_DEV_ATTR_SAMP_FREQ_AVAIL( \
 			st_sensors_sysfs_sampling_frequency_avail)
@@ -285,12 +281,6 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
 int st_sensors_check_device_support(struct iio_dev *indio_dev,
 			int num_sensors_list, const struct st_sensors *sensors);
 
-ssize_t st_sensors_sysfs_get_sampling_frequency(struct device *dev,
-				struct device_attribute *attr, char *buf);
-
-ssize_t st_sensors_sysfs_set_sampling_frequency(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t size);
-
 ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
 				struct device_attribute *attr, char *buf);
 

include/linux/iio/common/st_sensors_i2c.h

@@ -13,8 +13,19 @@
 
 #include <linux/i2c.h>
 #include <linux/iio/common/st_sensors.h>
+#include <linux/of.h>
 
 void st_sensors_i2c_configure(struct iio_dev *indio_dev,
 		struct i2c_client *client, struct st_sensor_data *sdata);
 
+#ifdef CONFIG_OF
+void st_sensors_of_i2c_probe(struct i2c_client *client,
+			     const struct of_device_id *match);
+#else
+static inline void st_sensors_of_i2c_probe(struct i2c_client *client,
+					   const struct of_device_id *match)
+{
+}
+#endif
+
 #endif /* ST_SENSORS_I2C_H */

include/linux/iio/imu/adis.h

@@ -157,13 +157,14 @@ int adis_single_conversion(struct iio_dev *indio_dev,
 	const struct iio_chan_spec *chan, unsigned int error_mask,
 	int *val);
 
-#define ADIS_VOLTAGE_CHAN(addr, si, chan, name, bits) { \
+#define ADIS_VOLTAGE_CHAN(addr, si, chan, name, info_all, bits) { \
 	.type = IIO_VOLTAGE, \
 	.indexed = 1, \
 	.channel = (chan), \
 	.extend_name = name, \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
 		BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = info_all, \
 	.address = (addr), \
 	.scan_index = (si), \
 	.scan_type = { \
@@ -174,19 +175,20 @@ int adis_single_conversion(struct iio_dev *indio_dev,
 	}, \
 }
 
-#define ADIS_SUPPLY_CHAN(addr, si, bits) \
-	ADIS_VOLTAGE_CHAN(addr, si, 0, "supply", bits)
+#define ADIS_SUPPLY_CHAN(addr, si, info_all, bits) \
+	ADIS_VOLTAGE_CHAN(addr, si, 0, "supply", info_all, bits)
 
-#define ADIS_AUX_ADC_CHAN(addr, si, bits) \
-	ADIS_VOLTAGE_CHAN(addr, si, 1, NULL, bits)
+#define ADIS_AUX_ADC_CHAN(addr, si, info_all, bits) \
+	ADIS_VOLTAGE_CHAN(addr, si, 1, NULL, info_all, bits)
 
-#define ADIS_TEMP_CHAN(addr, si, bits) { \
+#define ADIS_TEMP_CHAN(addr, si, info_all, bits) { \
 	.type = IIO_TEMP, \
 	.indexed = 1, \
 	.channel = 0, \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
 		BIT(IIO_CHAN_INFO_SCALE) | \
 		BIT(IIO_CHAN_INFO_OFFSET), \
+	.info_mask_shared_by_all = info_all, \
 	.address = (addr), \
 	.scan_index = (si), \
 	.scan_type = { \
@@ -197,13 +199,14 @@ int adis_single_conversion(struct iio_dev *indio_dev,
 	}, \
 }
 
-#define ADIS_MOD_CHAN(_type, mod, addr, si, info_sep, bits) { \
+#define ADIS_MOD_CHAN(_type, mod, addr, si, info_sep, info_all, bits) { \
 	.type = (_type), \
 	.modified = 1, \
 	.channel2 = IIO_MOD_ ## mod, \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
 		 info_sep, \
 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = info_all, \
 	.address = (addr), \
 	.scan_index = (si), \
 	.scan_type = { \
@@ -214,17 +217,17 @@ int adis_single_conversion(struct iio_dev *indio_dev,
 	}, \
 }
 
-#define ADIS_ACCEL_CHAN(mod, addr, si, info_sep, bits) \
-	ADIS_MOD_CHAN(IIO_ACCEL, mod, addr, si, info_sep, bits)
+#define ADIS_ACCEL_CHAN(mod, addr, si, info_sep, info_all, bits) \
+	ADIS_MOD_CHAN(IIO_ACCEL, mod, addr, si, info_sep, info_all, bits)
 
-#define ADIS_GYRO_CHAN(mod, addr, si, info_sep, bits) \
-	ADIS_MOD_CHAN(IIO_ANGL_VEL, mod, addr, si, info_sep, bits)
+#define ADIS_GYRO_CHAN(mod, addr, si, info_sep, info_all, bits)		\
+	ADIS_MOD_CHAN(IIO_ANGL_VEL, mod, addr, si, info_sep, info_all, bits)
 
-#define ADIS_INCLI_CHAN(mod, addr, si, info_sep, bits) \
-	ADIS_MOD_CHAN(IIO_INCLI, mod, addr, si, info_sep, bits)
+#define ADIS_INCLI_CHAN(mod, addr, si, info_sep, info_all, bits) \
+	ADIS_MOD_CHAN(IIO_INCLI, mod, addr, si, info_sep, info_all, bits)
 
-#define ADIS_ROT_CHAN(mod, addr, si, info_sep, bits) \
-	ADIS_MOD_CHAN(IIO_ROT, mod, addr, si, info_sep, bits)
+#define ADIS_ROT_CHAN(mod, addr, si, info_sep, info_all, bits) \
+	ADIS_MOD_CHAN(IIO_ROT, mod, addr, si, info_sep, info_all, bits)
 
 #ifdef CONFIG_IIO_ADIS_LIB_BUFFER
 

include/linux/iio/types.h

@@ -70,6 +70,7 @@ enum iio_event_info {
 	IIO_EV_INFO_ENABLE,
 	IIO_EV_INFO_VALUE,
 	IIO_EV_INFO_HYSTERESIS,
+	IIO_EV_INFO_PERIOD,
 };
 
 enum iio_event_direction {