Merge branch 'next/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (35 commits)
  ARM: msm: platsmp: determine number of CPU cores at boot time
  ARM: Tegra: Seaboard: Fix I2C bus numbering for ADT7461
  ARM: Tegra: Trimslice: Tri-state DAP3 pinmux
  ARM: orion5x: fixup 5181 MPP mask check
  ARM: mxs-dma: include <linux/dmaengine.h>
  ARM: i.MX53: consistently use MX53_UART_PAD_CTRL for uart txd/rxd/rts/cts
  ARM: i.MX53: UARTn_CTS pin should not change RTS input select
  ARM: i.MX53: UARTn_TXD pin should not change RXD input select
  ARM: mx25: Fix typo on CAN1_RX pad setting
  iomux-mx53: add missing 'IOMUX_CONFIG_SION' for some I2C pad definitions
  ARM: NUC93X: add UL suffix to VMALLOC_END to ensure it is properly typed
  ARM: LPC32XXX: add UL suffix to VMALLOC_END to ensure it is properly typed
  ARM: CNS3XXX: add UL suffix to VMALLOC_END to ensure it is properly typed
  ARM: i.MX53: Fix IOMUX type o's
  ARM i.MX dma: Fix burstsize settings
  mach-mx5: fix the I2C clock parents
  ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0
  ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.h
  ARM: mx53: Fix some interrupts marked as reserved.
  MXC: iomux-v3: correct NO_PAD_CTRL definition
  ...

Fix up trivial conflict in arch/arm/mach-imx/mach-mx31_3ds.c

arch/arm/configs/mx51_defconfig

@@ -106,6 +106,7 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_SDHCI=m
@@ -145,7 +146,7 @@ CONFIG_ROOT_NFS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y

arch/arm/configs/mxs_defconfig

@@ -89,7 +89,7 @@ CONFIG_DISPLAY_SUPPORT=m
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_MXS=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=m
 CONFIG_DMADEVICES=y
 CONFIG_MXS_DMA=y

arch/arm/mach-cns3xxx/include/mach/vmalloc.h

@@ -8,4 +8,4 @@
  * published by the Free Software Foundation.
  */
 
-#define VMALLOC_END		0xd8000000
+#define VMALLOC_END		0xd8000000UL

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -42,10 +42,11 @@
 
 #include "devices-imx27.h"
 
-#define SD1_EN_GPIO (GPIO_PORTB + 25)
-#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23)
-#define SPI2_SS0 (GPIO_PORTD + 21)
-#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTC + 28)
+#define SD1_EN_GPIO		IMX_GPIO_NR(2, 25)
+#define OTG_PHY_RESET_GPIO	IMX_GPIO_NR(2, 23)
+#define SPI2_SS0		IMX_GPIO_NR(4, 21)
+#define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(3, 28))
+#define PMIC_INT		IMX_GPIO_NR(3, 14)
 
 static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
@@ -98,9 +99,12 @@ static const int mx27pdk_pins[] __initconst = {
 	PD22_PF_CSPI2_SCLK,
 	PD23_PF_CSPI2_MISO,
 	PD24_PF_CSPI2_MOSI,
+	SPI2_SS0 | GPIO_GPIO | GPIO_OUT,
 	/* I2C1 */
 	PD17_PF_I2C_DATA,
 	PD18_PF_I2C_CLK,
+	/* PMIC INT */
+	PMIC_INT | GPIO_GPIO | GPIO_IN,
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -193,6 +197,13 @@ static int __init mx27_3ds_otg_mode(char *options)
 __setup("otg_mode=", mx27_3ds_otg_mode);
 
 /* Regulators */
+static struct regulator_init_data gpo_init = {
+	.constraints = {
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
 static struct regulator_consumer_supply vmmc1_consumers[] = {
 	REGULATOR_SUPPLY("lcd_2v8", NULL),
 };
@@ -201,7 +212,9 @@ static struct regulator_init_data vmmc1_init = {
 	.constraints = {
 		.min_uV	= 2800000,
 		.max_uV = 2800000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.apply_uV = 1,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
 	.consumer_supplies = vmmc1_consumers,
@@ -228,6 +241,12 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
 	}, {
 		.id = MC13783_REG_VGEN,
 		.init_data = &vgen_init,
+	}, {
+		.id = MC13783_REG_GPO1, /* Turn on 1.8V */
+		.init_data = &gpo_init,
+	}, {
+		.id = MC13783_REG_GPO3, /* Turn on 3.3V */
+		.init_data = &gpo_init,
 	},
 };
 

arch/arm/mach-imx/mach-mx31_3ds.c

@@ -54,11 +54,8 @@ static int mx31_3ds_pins[] = {
 	MX31_PIN_RXD1__RXD1,
 	IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
 	/*SPI0*/
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */
+	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1),
 	/* SPI 1 */
 	MX31_PIN_CSPI2_SCLK__SCLK,
 	MX31_PIN_CSPI2_MOSI__MOSI,
@@ -692,6 +689,9 @@ static void __init mx31_3ds_init(void)
 
 	imx31_soc_init();
 
+	/* Configure SPI1 IOMUX */
+	mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true);
+
 	mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
 				      "mx31_3ds");
 

arch/arm/mach-lpc32xx/include/mach/vmalloc.h

@@ -19,6 +19,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	0xF0000000
+#define VMALLOC_END	0xF0000000UL
 
 #endif

arch/arm/mach-msm/platsmp.c

@@ -18,6 +18,7 @@
 
 #include <asm/hardware/gic.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 #include <asm/mach-types.h>
 
 #include <mach/msm_iomap.h>
@@ -40,6 +41,12 @@ volatile int pen_release = -1;
 
 static DEFINE_SPINLOCK(boot_lock);
 
+static inline int get_core_count(void)
+{
+	/* 1 + the PART[1:0] field of MIDR */
+	return ((read_cpuid_id() >> 4) & 3) + 1;
+}
+
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	/* Configure edge-triggered PPIs */
@@ -147,9 +154,9 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i;
+	unsigned int i, ncores = get_core_count();
 
-	for (i = 0; i < NR_CPUS; i++)
+	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
 
         set_smp_cross_call(gic_raise_softirq);

arch/arm/mach-mx5/clock-mx51-mx53.c

@@ -1274,9 +1274,9 @@ DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
 
 /* I2C */
 DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
+	NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
 	NULL, NULL, &ipg_clk, NULL);
 

arch/arm/mach-mxs/devices/platform-mxsfb.c

@@ -5,6 +5,7 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
+#include <linux/dma-mapping.h>
 #include <asm/sizes.h>
 #include <mach/mx23.h>
 #include <mach/mx28.h>

arch/arm/mach-mxs/include/mach/dma.h

@@ -9,6 +9,8 @@
 #ifndef __MACH_MXS_DMA_H__
 #define __MACH_MXS_DMA_H__
 
+#include <linux/dmaengine.h>
+
 struct mxs_dma_data {
 	int chan_irq;
 };

arch/arm/mach-mxs/mach-tx28.c

@@ -101,14 +101,6 @@ static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
 		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
 	MX28_PAD_SSP0_DATA3__SSP0_D3 |
 		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA4__SSP0_D4 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA5__SSP0_D5 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA6__SSP0_D6 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-	MX28_PAD_SSP0_DATA7__SSP0_D7 |
-		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
 	MX28_PAD_SSP0_CMD__SSP0_CMD |
 		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
 	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |

arch/arm/mach-nuc93x/include/mach/vmalloc.h

@@ -18,6 +18,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xE0000000)
+#define VMALLOC_END	  0xE0000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-orion5x/mpp.c

@@ -24,7 +24,7 @@ static unsigned int __init orion5x_variant(void)
 
 	orion5x_pcie_id(&dev, &rev);
 
-	if (dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0)
+	if (dev == MV88F5181_DEV_ID)
 		return MPP_F5181_MASK;
 
 	if (dev == MV88F5182_DEV_ID)

arch/arm/mach-tegra/board-seaboard.c

@@ -159,7 +159,7 @@ static void __init seaboard_i2c_init(void)
 
 	i2c_register_board_info(0, &isl29018_device, 1);
 
-	i2c_register_board_info(4, &adt7461_device, 1);
+	i2c_register_board_info(3, &adt7461_device, 1);
 
 	tegra_i2c_device1.dev.platform_data = &seaboard_i2c1_platform_data;
 	tegra_i2c_device2.dev.platform_data = &seaboard_i2c2_platform_data;

arch/arm/mach-tegra/board-trimslice-pinmux.c

@@ -35,7 +35,7 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = {
 	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN,   TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_NORMAL},
+	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_I2C2,          TEGRA_PUPD_PULL_UP,     TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_DTA,   TEGRA_MUX_VI,            TEGRA_PUPD_NORMAL,      TEGRA_TRI_TRISTATE},

arch/arm/plat-mxc/devices/platform-imx-dma.c

@@ -33,22 +33,22 @@ struct imx_imx_sdma_data {
 
 #ifdef CONFIG_SOC_IMX25
 struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
-	imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0);
+	imx_imx_sdma_data_entry_single(MX25, 2, "imx25", 1);
 #endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX31
 struct imx_imx_sdma_data imx31_imx_sdma_data __initdata =
-	imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0);
+	imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 1);
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
 #ifdef CONFIG_SOC_IMX35
 struct imx_imx_sdma_data imx35_imx_sdma_data __initdata =
-	imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0);
+	imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 1);
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
 #ifdef CONFIG_SOC_IMX51
 struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
-	imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0);
+	imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 1);
 #endif /* ifdef CONFIG_SOC_IMX51 */
 
 static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
@@ -57,7 +57,7 @@ static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
 	struct resource res[] = {
 		{
 			.start = data->iobase,
-			.end = data->iobase + SZ_4K - 1,
+			.end = data->iobase + SZ_16K - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
 			.start = data->irq,
@@ -77,7 +77,7 @@ static struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
 }
 
 #ifdef CONFIG_ARCH_MX25
-static struct sdma_script_start_addrs addr_imx25_to1 = {
+static struct sdma_script_start_addrs addr_imx25 = {
 	.ap_2_ap_addr = 729,
 	.uart_2_mcu_addr = 904,
 	.per_2_app_addr = 1255,
@@ -165,7 +165,7 @@ static int __init imxXX_add_imx_dma(void)
 
 #if defined(CONFIG_SOC_IMX25)
 	if (cpu_is_mx25()) {
-		imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25_to1;
+		imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25;
 		ret = imx_add_imx_sdma(&imx25_imx_sdma_data);
 	} else
 #endif

arch/arm/plat-mxc/devices/platform-imx-ssi.c

@@ -69,7 +69,7 @@ const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX51
 const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
 #define imx51_imx_ssi_data_entry(_id, _hwid)				\
-	imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K)
+	imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_16K)
 	imx51_imx_ssi_data_entry(0, 1),
 	imx51_imx_ssi_data_entry(1, 2),
 	imx51_imx_ssi_data_entry(2, 3),

arch/arm/plat-mxc/include/mach/iomux-mx25.h

@@ -457,7 +457,7 @@
 #define MX25_PAD_GPIO_A__USBOTG_PWR	IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
 
 #define MX25_PAD_GPIO_B__GPIO_B		IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_GPIO_B__CAN1_RX	IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K)
+#define MX25_PAD_GPIO_B__CAN1_RX	IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP)
 #define MX25_PAD_GPIO_B__USBOTG_OC	IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
 
 #define MX25_PAD_GPIO_C__GPIO_C		IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)

arch/arm/plat-mxc/include/mach/iomux-v1.h

@@ -98,7 +98,6 @@
 extern int mxc_gpio_mode(int gpio_mode);
 extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 		const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
 
 extern int __init imx_iomuxv1_init(void __iomem *base, int numports);
 

arch/arm/plat-mxc/include/mach/iomux-v3.h

@@ -66,7 +66,6 @@ typedef u64 iomux_v3_cfg_t;
 #define MUX_MODE_MASK		((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
 #define MUX_PAD_CTRL_SHIFT	41
 #define MUX_PAD_CTRL_MASK	((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
-#define NO_PAD_CTRL		((iomux_v3_cfg_t)1 << (MUX_PAD_CTRL_SHIFT + 16))
 #define MUX_SEL_INPUT_SHIFT	58
 #define MUX_SEL_INPUT_MASK	((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
 
@@ -85,6 +84,7 @@ typedef u64 iomux_v3_cfg_t;
  * Use to set PAD control
  */
 
+#define NO_PAD_CTRL			(1 << 16)
 #define PAD_CTL_DVS			(1 << 13)
 #define PAD_CTL_HYS			(1 << 8)
 

arch/arm/plat-mxc/include/mach/mx53.h

@@ -145,14 +145,14 @@
 /*
  * Memory regions and CS
  */
-#define MX53_CSD0_BASE_ADDR		0x90000000
-#define MX53_CSD1_BASE_ADDR		0xA0000000
-#define MX53_CS0_BASE_ADDR		0xB0000000
-#define MX53_CS1_BASE_ADDR		0xB8000000
-#define MX53_CS2_BASE_ADDR		0xC0000000
-#define MX53_CS3_BASE_ADDR		0xC8000000
-#define MX53_CS4_BASE_ADDR		0xCC000000
-#define MX53_CS5_BASE_ADDR		0xCE000000
+#define MX53_CSD0_BASE_ADDR		0x70000000
+#define MX53_CSD1_BASE_ADDR		0xB0000000
+#define MX53_CS0_BASE_ADDR		0xF0000000
+#define MX53_CS1_32MB_BASE_ADDR	0xF2000000
+#define MX53_CS1_64MB_BASE_ADDR		0xF4000000
+#define MX53_CS2_64MB_BASE_ADDR		0xF4000000
+#define MX53_CS2_96MB_BASE_ADDR		0xF6000000
+#define MX53_CS3_BASE_ADDR		0xF6000000
 
 #define MX53_IO_P2V(x)			IMX_IO_P2V(x)
 #define MX53_IO_ADDRESS(x)		IOMEM(MX53_IO_P2V(x))
@@ -233,7 +233,7 @@
 #define MX53_INT_ESDHC2	2
 #define MX53_INT_ESDHC3	3
 #define MX53_INT_ESDHC4	4
-#define MX53_INT_RESV5	5
+#define MX53_INT_DAP	5
 #define MX53_INT_SDMA	6
 #define MX53_INT_IOMUX	7
 #define MX53_INT_NFC	8
@@ -262,8 +262,8 @@
 #define MX53_INT_UART1	31
 #define MX53_INT_UART2	32
 #define MX53_INT_UART3	33
-#define MX53_INT_RESV34	34
-#define MX53_INT_RESV35	35
+#define MX53_INT_RTC	34
+#define MX53_INT_PTP	35
 #define MX53_INT_ECSPI1	36
 #define MX53_INT_ECSPI2	37
 #define MX53_INT_CSPI	38
@@ -293,8 +293,8 @@
 #define MX53_INT_I2C1	62
 #define MX53_INT_I2C2	63
 #define MX53_INT_I2C3	64
-#define MX53_INT_RESV65	65
-#define MX53_INT_RESV66	66
+#define MX53_INT_MLB	65
+#define MX53_INT_ASRC	66
 #define MX53_INT_SPDIF	67
 #define MX53_INT_SIM_DAT	68
 #define MX53_INT_IIM	69

arch/arm/plat-mxc/iomux-v1.c

@@ -157,7 +157,7 @@ EXPORT_SYMBOL(mxc_gpio_mode);
 static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
 {
 	size_t i;
-	int ret;
+	int ret = 0;
 
 	for (i = 0; i < count; ++i) {
 		ret = mxc_gpio_mode(list[i]);
@@ -172,45 +172,13 @@ static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
 int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 		const char *label)
 {
-	size_t i;
 	int ret;
 
-	for (i = 0; i < count; ++i) {
-		unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-		ret = gpio_request(gpio, label);
-		if (ret)
-			goto err_gpio_request;
-	}
-
 	ret = imx_iomuxv1_setup_multiple(pin_list, count);
-	if (ret)
-		goto err_setup;
-
-	return 0;
-
-err_setup:
-	BUG_ON(i != count);
-
-err_gpio_request:
-	mxc_gpio_release_multiple_pins(pin_list, i);
-
 	return ret;
 }
 EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
 
-void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
-{
-	size_t i;
-
-	for (i = 0; i < count; ++i) {
-		unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-		gpio_free(gpio);
-	}
-}
-EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
-
 int __init imx_iomuxv1_init(void __iomem *base, int numports)
 {
 	imx_iomuxv1_baseaddr = base;

drivers/dma/imx-dma.c

@@ -135,7 +135,8 @@ static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 		if (ret)
 			return ret;
 
-		imx_dma_config_burstlen(imxdmac->imxdma_channel, imxdmac->watermark_level);
+		imx_dma_config_burstlen(imxdmac->imxdma_channel,
+				imxdmac->watermark_level * imxdmac->word_size);
 
 		return 0;
 	default:

drivers/mmc/host/mxcmmc.c

@@ -715,13 +715,13 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	int burstlen, ret;
 
 	/*
-	 * use burstlen of 64 in 4 bit mode (--> reg value  0)
-	 * use burstlen of 16 in 1 bit mode (--> reg value 16)
+	 * use burstlen of 64 (16 words) in 4 bit mode (--> reg value  0)
+	 * use burstlen of 16 (4 words) in 1 bit mode (--> reg value 16)
 	 */
 	if (ios->bus_width == MMC_BUS_WIDTH_4)
-		burstlen = 64;
-	else
 		burstlen = 16;
+	else
+		burstlen = 4;
 
 	if (mxcmci_use_dma(host) && burstlen != host->burstlen) {
 		host->burstlen = burstlen;

sound/soc/imx/imx-pcm-dma-mx2.c

@@ -110,12 +110,12 @@ static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
 		slave_config.direction = DMA_TO_DEVICE;
 		slave_config.dst_addr = dma_params->dma_addr;
 		slave_config.dst_addr_width = buswidth;
-		slave_config.dst_maxburst = dma_params->burstsize * buswidth;
+		slave_config.dst_maxburst = dma_params->burstsize;
 	} else {
 		slave_config.direction = DMA_FROM_DEVICE;
 		slave_config.src_addr = dma_params->dma_addr;
 		slave_config.src_addr_width = buswidth;
-		slave_config.src_maxburst = dma_params->burstsize * buswidth;
+		slave_config.src_maxburst = dma_params->burstsize;
 	}
 
 	ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);