Commit dd9d4e74 authored by Ray Jui's avatar Ray Jui Committed by Bjorn Helgaas

PCI: iproc: Add inbound DMA mapping support

Add support for inbound DMA mapping.  The range of the inbound mapping is
configured by the optional device tree property 'dma-ranges'.

While inbound mapping is done automatically in the ASIC on most iProc-based
SoCs, newer ASICs (e.g., Stingray) require inbound mapping to be configured
explicitly in software.

[bhelgaas: fold in fixes to avoid 32-bit division in iproc_pcie_ib_write()
and uninitialized return value in iproc_pcie_setup_ib() from Arnd Bergmann
<arnd@arndb.de>]
Signed-off-by: default avatarOza Oza <oza.oza@broadcom.com>
Signed-off-by: default avatarRay Jui <ray.jui@broadcom.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: default avatarScott Branden <scott.branden@broadcom.com>
parent 3589c66c
......@@ -81,6 +81,15 @@
#define OARR_VALID BIT(OARR_VALID_SHIFT)
#define OARR_SIZE_CFG_SHIFT 1
/*
* Maximum number of inbound mapping region sizes that can be supported by an
* IARR
*/
#define MAX_NUM_IB_REGION_SIZES 9
#define IMAP_VALID_SHIFT 0
#define IMAP_VALID BIT(IMAP_VALID_SHIFT)
#define PCI_EXP_CAP 0xac
#define IPROC_PCIE_REG_INVALID 0xffff
......@@ -109,6 +118,44 @@ static const struct iproc_pcie_ob_map paxb_ob_map[] = {
},
};
/**
* iProc PCIe inbound mapping type
*/
enum iproc_pcie_ib_map_type {
/* for DDR memory */
IPROC_PCIE_IB_MAP_MEM = 0,
/* for device I/O memory */
IPROC_PCIE_IB_MAP_IO,
/* invalid or unused */
IPROC_PCIE_IB_MAP_INVALID
};
/**
* iProc PCIe inbound mapping controller specific parameters
*
* @type: inbound mapping region type
* @size_unit: inbound mapping region size unit, could be SZ_1K, SZ_1M, or
* SZ_1G
* @region_sizes: list of supported inbound mapping region sizes in KB, MB, or
* GB, depedning on the size unit
* @nr_sizes: number of supported inbound mapping region sizes
* @nr_windows: number of supported inbound mapping windows for the region
* @imap_addr_offset: register offset between the upper and lower 32-bit
* IMAP address registers
* @imap_window_offset: register offset between each IMAP window
*/
struct iproc_pcie_ib_map {
enum iproc_pcie_ib_map_type type;
unsigned int size_unit;
resource_size_t region_sizes[MAX_NUM_IB_REGION_SIZES];
unsigned int nr_sizes;
unsigned int nr_windows;
u16 imap_addr_offset;
u16 imap_window_offset;
};
/*
* iProc PCIe host registers
*/
......@@ -162,6 +209,18 @@ enum iproc_pcie_reg {
IPROC_PCIE_OARR3,
IPROC_PCIE_OMAP3,
/* inbound address mapping */
IPROC_PCIE_IARR0,
IPROC_PCIE_IMAP0,
IPROC_PCIE_IARR1,
IPROC_PCIE_IMAP1,
IPROC_PCIE_IARR2,
IPROC_PCIE_IMAP2,
IPROC_PCIE_IARR3,
IPROC_PCIE_IMAP3,
IPROC_PCIE_IARR4,
IPROC_PCIE_IMAP4,
/* link status */
IPROC_PCIE_LINK_STATUS,
......@@ -653,6 +712,180 @@ static int iproc_pcie_map_ranges(struct iproc_pcie *pcie,
return 0;
}
static inline bool iproc_pcie_ib_is_in_use(struct iproc_pcie *pcie,
int region_idx)
{
const struct iproc_pcie_ib_map *ib_map = &pcie->ib_map[region_idx];
u32 val;
val = iproc_pcie_read_reg(pcie, MAP_REG(IPROC_PCIE_IARR0, region_idx));
return !!(val & (BIT(ib_map->nr_sizes) - 1));
}
static inline bool iproc_pcie_ib_check_type(const struct iproc_pcie_ib_map *ib_map,
enum iproc_pcie_ib_map_type type)
{
return !!(ib_map->type == type);
}
static int iproc_pcie_ib_write(struct iproc_pcie *pcie, int region_idx,
int size_idx, int nr_windows, u64 axi_addr,
u64 pci_addr, resource_size_t size)
{
struct device *dev = pcie->dev;
const struct iproc_pcie_ib_map *ib_map = &pcie->ib_map[region_idx];
u16 iarr_offset, imap_offset;
u32 val;
int window_idx;
iarr_offset = iproc_pcie_reg_offset(pcie,
MAP_REG(IPROC_PCIE_IARR0, region_idx));
imap_offset = iproc_pcie_reg_offset(pcie,
MAP_REG(IPROC_PCIE_IMAP0, region_idx));
if (iproc_pcie_reg_is_invalid(iarr_offset) ||
iproc_pcie_reg_is_invalid(imap_offset))
return -EINVAL;
dev_info(dev, "ib region [%d]: offset 0x%x axi %pap pci %pap\n",
region_idx, iarr_offset, &axi_addr, &pci_addr);
/*
* Program the IARR registers. The upper 32-bit IARR register is
* always right after the lower 32-bit IARR register.
*/
writel(lower_32_bits(pci_addr) | BIT(size_idx),
pcie->base + iarr_offset);
writel(upper_32_bits(pci_addr), pcie->base + iarr_offset + 4);
dev_info(dev, "iarr lo 0x%x iarr hi 0x%x\n",
readl(pcie->base + iarr_offset),
readl(pcie->base + iarr_offset + 4));
/*
* Now program the IMAP registers. Each IARR region may have one or
* more IMAP windows.
*/
size >>= ilog2(nr_windows);
for (window_idx = 0; window_idx < nr_windows; window_idx++) {
val = readl(pcie->base + imap_offset);
val |= lower_32_bits(axi_addr) | IMAP_VALID;
writel(val, pcie->base + imap_offset);
writel(upper_32_bits(axi_addr),
pcie->base + imap_offset + ib_map->imap_addr_offset);
dev_info(dev, "imap window [%d] lo 0x%x hi 0x%x\n",
window_idx, readl(pcie->base + imap_offset),
readl(pcie->base + imap_offset +
ib_map->imap_addr_offset));
imap_offset += ib_map->imap_window_offset;
axi_addr += size;
}
return 0;
}
static int iproc_pcie_setup_ib(struct iproc_pcie *pcie,
struct of_pci_range *range,
enum iproc_pcie_ib_map_type type)
{
struct device *dev = pcie->dev;
struct iproc_pcie_ib *ib = &pcie->ib;
int ret;
unsigned int region_idx, size_idx;
u64 axi_addr = range->cpu_addr, pci_addr = range->pci_addr;
resource_size_t size = range->size;
/* iterate through all IARR mapping regions */
for (region_idx = 0; region_idx < ib->nr_regions; region_idx++) {
const struct iproc_pcie_ib_map *ib_map =
&pcie->ib_map[region_idx];
/*
* If current inbound region is already in use or not a
* compatible type, move on to the next.
*/
if (iproc_pcie_ib_is_in_use(pcie, region_idx) ||
!iproc_pcie_ib_check_type(ib_map, type))
continue;
/* iterate through all supported region sizes to find a match */
for (size_idx = 0; size_idx < ib_map->nr_sizes; size_idx++) {
resource_size_t region_size =
ib_map->region_sizes[size_idx] * ib_map->size_unit;
if (size != region_size)
continue;
if (!IS_ALIGNED(axi_addr, region_size) ||
!IS_ALIGNED(pci_addr, region_size)) {
dev_err(dev,
"axi %pap or pci %pap not aligned\n",
&axi_addr, &pci_addr);
return -EINVAL;
}
/* Match found! Program IARR and all IMAP windows. */
ret = iproc_pcie_ib_write(pcie, region_idx, size_idx,
ib_map->nr_windows, axi_addr,
pci_addr, size);
if (ret)
goto err_ib;
else
return 0;
}
}
ret = -EINVAL;
err_ib:
dev_err(dev, "unable to configure inbound mapping\n");
dev_err(dev, "axi %pap, pci %pap, res size %pap\n",
&axi_addr, &pci_addr, &size);
return ret;
}
static int pci_dma_range_parser_init(struct of_pci_range_parser *parser,
struct device_node *node)
{
const int na = 3, ns = 2;
int rlen;
parser->node = node;
parser->pna = of_n_addr_cells(node);
parser->np = parser->pna + na + ns;
parser->range = of_get_property(node, "dma-ranges", &rlen);
if (!parser->range)
return -ENOENT;
parser->end = parser->range + rlen / sizeof(__be32);
return 0;
}
static int iproc_pcie_map_dma_ranges(struct iproc_pcie *pcie)
{
struct of_pci_range range;
struct of_pci_range_parser parser;
int ret;
/* Get the dma-ranges from DT */
ret = pci_dma_range_parser_init(&parser, pcie->dev->of_node);
if (ret)
return ret;
for_each_of_pci_range(&parser, &range) {
/* Each range entry corresponds to an inbound mapping region */
ret = iproc_pcie_setup_ib(pcie, &range, IPROC_PCIE_IB_MAP_MEM);
if (ret)
return ret;
}
return 0;
}
static int iproce_pcie_get_msi(struct iproc_pcie *pcie,
struct device_node *msi_node,
u64 *msi_addr)
......@@ -880,6 +1113,10 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
}
}
ret = iproc_pcie_map_dma_ranges(pcie);
if (ret && ret != -ENOENT)
goto err_power_off_phy;
#ifdef CONFIG_ARM
pcie->sysdata.private_data = pcie;
sysdata = &pcie->sysdata;
......
......@@ -41,7 +41,16 @@ struct iproc_pcie_ob {
unsigned int nr_windows;
};
/**
* iProc PCIe inbound mapping
* @nr_regions: total number of supported inbound mapping regions
*/
struct iproc_pcie_ib {
unsigned int nr_regions;
};
struct iproc_pcie_ob_map;
struct iproc_pcie_ib_map;
struct iproc_msi;
/**
......@@ -64,6 +73,9 @@ struct iproc_msi;
* @ob: outbound mapping related parameters
* @ob_map: outbound mapping related parameters specific to the controller
*
* @ib: inbound mapping related parameters
* @ib_map: outbound mapping region related parameters
*
* @need_msi_steer: indicates additional configuration of the iProc PCIe
* controller is required to steer MSI writes to external interrupt controller
* @msi: MSI data
......@@ -87,6 +99,9 @@ struct iproc_pcie {
struct iproc_pcie_ob ob;
const struct iproc_pcie_ob_map *ob_map;
struct iproc_pcie_ib ib;
const struct iproc_pcie_ib_map *ib_map;
bool need_msi_steer;
struct iproc_msi *msi;
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment