Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

 - Cache invalidation fix for early CPU boot status update (incorrect
   cacheline)

 - of_put_node() missing in the spin_table code

 - EL1/El2 early init inconsistency when Virtualisation Host Extensions
   are present

 - RCU warning fix in the arm_pmu.c driver

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix EL1/EL2 early init inconsistencies with VHE
  drivers/perf: arm-pmu: fix RCU usage on pmu resume from low-power
  arm64: spin-table: add missing of_node_put()
  arm64: fix invalidation of wrong __early_cpu_boot_status cacheline

arch/arm64/kernel/head.S

@@ -588,6 +588,15 @@ set_hcr:
 	msr	vpidr_el2, x0
 	msr	vmpidr_el2, x1
 
+	/*
+	 * When VHE is not in use, early init of EL2 and EL1 needs to be
+	 * done here.
+	 * When VHE _is_ in use, EL1 will not be used in the host and
+	 * requires no configuration, and all non-hyp-specific EL2 setup
+	 * will be done via the _EL1 system register aliases in __cpu_setup.
+	 */
+	cbnz	x2, 1f
+
 	/* sctlr_el1 */
 	mov	x0, #0x0800			// Set/clear RES{1,0} bits
 CPU_BE(	movk	x0, #0x33d0, lsl #16	)	// Set EE and E0E on BE systems
@@ -597,6 +606,7 @@ CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
 	/* Coprocessor traps. */
 	mov	x0, #0x33ff
 	msr	cptr_el2, x0			// Disable copro. traps to EL2
+1:
 
 #ifdef CONFIG_COMPAT
 	msr	hstr_el2, xzr			// Disable CP15 traps to EL2
@@ -734,7 +744,8 @@ ENDPROC(__secondary_switched)
 
 	.macro	update_early_cpu_boot_status status, tmp1, tmp2
 	mov	\tmp2, #\status
-	str_l	\tmp2, __early_cpu_boot_status, \tmp1
+	adr_l	\tmp1, __early_cpu_boot_status
+	str	\tmp2, [\tmp1]
 	dmb	sy
 	dc	ivac, \tmp1			// Invalidate potentially stale cache line
 	.endm

arch/arm64/kernel/smp_spin_table.c

@@ -52,6 +52,7 @@ static void write_pen_release(u64 val)
 static int smp_spin_table_cpu_init(unsigned int cpu)
 {
 	struct device_node *dn;
+	int ret;
 
 	dn = of_get_cpu_node(cpu, NULL);
 	if (!dn)
@@ -60,15 +61,15 @@ static int smp_spin_table_cpu_init(unsigned int cpu)
 	/*
 	 * Determine the address from which the CPU is polling.
 	 */
-	if (of_property_read_u64(dn, "cpu-release-addr",
-				 &cpu_release_addr[cpu])) {
+	ret = of_property_read_u64(dn, "cpu-release-addr",
+				   &cpu_release_addr[cpu]);
+	if (ret)
 		pr_err("CPU %d: missing or invalid cpu-release-addr property\n",
 		       cpu);
 
-		return -1;
-	}
+	of_node_put(dn);
 
-	return 0;
+	return ret;
 }
 
 static int smp_spin_table_cpu_prepare(unsigned int cpu)

drivers/perf/arm_pmu.c

@@ -737,8 +737,19 @@ static void cpu_pm_pmu_setup(struct arm_pmu *armpmu, unsigned long cmd)
 			break;
 		case CPU_PM_EXIT:
 		case CPU_PM_ENTER_FAILED:
-			 /* Restore and enable the counter */
-			armpmu_start(event, PERF_EF_RELOAD);
+			 /*
+			  * Restore and enable the counter.
+			  * armpmu_start() indirectly calls
+			  *
+			  * perf_event_update_userpage()
+			  *
+			  * that requires RCU read locking to be functional,
+			  * wrap the call within RCU_NONIDLE to make the
+			  * RCU subsystem aware this cpu is not idle from
+			  * an RCU perspective for the armpmu_start() call
+			  * duration.
+			  */
+			RCU_NONIDLE(armpmu_start(event, PERF_EF_RELOAD));
 			break;
 		default:
 			break;