Skip to content

L
linux
Commit df134490 authored by Brian Gerst's avatar Brian Gerst Committed by Linus Torvalds
Browse files
Options

[PATCH] remove boot98 

Remove the orphaned PC9800 boot code.
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 352a763c
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 726 deletions
arch/i386/boot98/compressed/Makefile deleted 100644 → 0
View file @ 352a763c
#
# linux/arch/i386/boot/compressed/Makefile
#
# create a compressed vmlinux image from the original vmlinux
#
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
EXTRA_AFLAGS := -traditional
LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup_32
$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
$(call if_changed,ld)
arch/i386/boot98/compressed/head.S deleted 100644 → 0
View file @ 352a763c
/*
* linux/boot/head.S
*
* Copyright (C) 1991, 1992, 1993 Linus Torvalds
*/
/*
* head.S contains the 32-bit startup code.
*
* NOTE!!! Startup happens at absolute address 0x00001000, which is also where
* the page directory will exist. The startup code will be overwritten by
* the page directory. [According to comments etc elsewhere on a compressed
* kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
*
* Page 0 is deliberately kept safe, since System Management Mode code in
* laptops may need to access the BIOS data stored there. This is also
* useful for future device drivers that either access the BIOS via VM86
* mode.
*/
/*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
.text
#include <linux/linkage.h>
#include <asm/segment.h>
.globl startup_32
startup_32:
cld
cli
movl $(__BOOT_DS),%eax
movl %eax,%ds
movl %eax,%es
movl %eax,%fs
movl %eax,%gs
lss stack_start,%esp
xorl %eax,%eax
1: incl %eax # check that A20 really IS enabled
movl %eax,0x000000 # loop forever if it isn't
cmpl %eax,0x100000
je 1b
/*
* Initialize eflags. Some BIOS's leave bits like NT set. This would
* confuse the debugger if this code is traced.
* XXX - best to initialize before switching to protected mode.
*/
pushl $0
popfl
/*
* Clear BSS
*/
xorl %eax,%eax
movl $_edata,%edi
movl $_end,%ecx
subl %edi,%ecx
cld
rep
stosb
/*
* Do the decompression, and jump to the new kernel..
*/
subl $16,%esp # place for structure on the stack
movl %esp,%eax
pushl %esi # real mode pointer as second arg
pushl %eax # address of structure as first arg
call decompress_kernel
orl %eax,%eax
jnz 3f
popl %esi # discard address
popl %esi # real mode pointer
xorl %ebx,%ebx
ljmp $(__BOOT_CS), $0x100000
/*
* We come here, if we were loaded high.
* We need to move the move-in-place routine down to 0x1000
* and then start it with the buffer addresses in registers,
* which we got from the stack.
*/
3:
movl $move_routine_start,%esi
movl $0x1000,%edi
movl $move_routine_end,%ecx
subl %esi,%ecx
addl $3,%ecx
shrl $2,%ecx
cld
rep
movsl
popl %esi # discard the address
popl %ebx # real mode pointer
popl %esi # low_buffer_start
popl %ecx # lcount
popl %edx # high_buffer_start
popl %eax # hcount
movl $0x100000,%edi
cli # make sure we don't get interrupted
ljmp $(__BOOT_CS), $0x1000 # and jump to the move routine
/*
* Routine (template) for moving the decompressed kernel in place,
* if we were high loaded. This _must_ PIC-code !
*/
move_routine_start:
movl %ecx,%ebp
shrl $2,%ecx
rep
movsl
movl %ebp,%ecx
andl $3,%ecx
rep
movsb
movl %edx,%esi
movl %eax,%ecx # NOTE: rep movsb won't move if %ecx == 0
addl $3,%ecx
shrl $2,%ecx
rep
movsl
movl %ebx,%esi # Restore setup pointer
xorl %ebx,%ebx
ljmp $(__BOOT_CS), $0x100000
move_routine_end:
arch/i386/boot98/compressed/misc.c deleted 100644 → 0
View file @ 352a763c
/*
* misc.c
*
* This is a collection of several routines from gzip-1.0.3
* adapted for Linux.
*
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
* puts by Nick Holloway 1993, better puts by Martin Mares 1995
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
#include <linux/linkage.h>
#include <linux/vmalloc.h>
#include <linux/tty.h>
#include <asm/io.h>
#ifdef STANDARD_MEMORY_BIOS_CALL
#undef STANDARD_MEMORY_BIOS_CALL
#endif
/*
* gzip declarations
*/
#define OF(args) args
#define STATIC static
#undef memset
#undef memcpy
/*
* Why do we do this? Don't ask me..
*
* Incomprehensible are the ways of bootloaders.
*/
static void* memset(void *, int, size_t);
static void* memcpy(void *, __const void *, size_t);
#define memzero(s, n) memset ((s), 0, (n))
typedef unsigned char uch;
typedef unsigned short ush;
typedef unsigned long ulg;
#define WSIZE 0x8000 /* Window size must be at least 32k, */
/* and a power of two */
static uch *inbuf; /* input buffer */
static uch window[WSIZE]; /* Sliding window buffer */
static unsigned insize = 0; /* valid bytes in inbuf */
static unsigned inptr = 0; /* index of next byte to be processed in inbuf */
static unsigned outcnt = 0; /* bytes in output buffer */
/* gzip flag byte */
#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
#define COMMENT 0x10 /* bit 4 set: file comment present */
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond,msg) {if(!(cond)) error(msg);}
# define Trace(x) fprintf x
# define Tracev(x) {if (verbose) fprintf x ;}
# define Tracevv(x) {if (verbose>1) fprintf x ;}
# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
#else
# define Assert(cond,msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
# define Tracec(c,x)
# define Tracecv(c,x)
#endif
static int fill_inbuf(void);
static void flush_window(void);
static void error(char *m);
static void gzip_mark(void **);
static void gzip_release(void **);
/*
* This is set up by the setup-routine at boot-time
*/
static unsigned char *real_mode; /* Pointer to real-mode data */
#define EXT_MEM_K (*(unsigned short *)(real_mode + 0x2))
#ifndef STANDARD_MEMORY_BIOS_CALL
#define ALT_MEM_K (*(unsigned long *)(real_mode + 0x1e0))
#endif
#define SCREEN_INFO (*(struct screen_info *)(real_mode+0))
extern char input_data[];
extern int input_len;
static long bytes_out = 0;
static uch *output_data;
static unsigned long output_ptr = 0;
static void *malloc(int size);
static void free(void *where);
static void puts(const char *);
extern int end;
static long free_mem_ptr = (long)&end;
static long free_mem_end_ptr;
#define INPLACE_MOVE_ROUTINE 0x1000
#define LOW_BUFFER_START 0x2000
#define LOW_BUFFER_MAX 0x90000
#define HEAP_SIZE 0x3000
static unsigned int low_buffer_end, low_buffer_size;
static int high_loaded =0;
static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/;
static char *vidmem = (char *)0xa0000;
static int lines, cols;
#ifdef CONFIG_X86_NUMAQ
static void * xquad_portio = NULL;
#endif
#include "../../../../lib/inflate.c"
static void *malloc(int size)
{
void *p;
if (size <0) error("Malloc error");
if (free_mem_ptr <= 0) error("Memory error");
free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
p = (void *)free_mem_ptr;
free_mem_ptr += size;
if (free_mem_ptr >= free_mem_end_ptr)
error("Out of memory");
return p;
}
static void free(void *where)
{ /* Don't care */
}
static void gzip_mark(void **ptr)
{
*ptr = (void *) free_mem_ptr;
}
static void gzip_release(void **ptr)
{
free_mem_ptr = (long) *ptr;
}
static void scroll(void)
{
int i;
memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 );
for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 )
vidmem[i] = ' ';
}
static void puts(const char *s)
{
int x,y,pos;
char c;
x = SCREEN_INFO.orig_x;
y = SCREEN_INFO.orig_y;
while ( ( c = *s++ ) != '\0' ) {
if ( c == '\n' ) {
x = 0;
if ( ++y >= lines ) {
scroll();
y--;
}
} else {
vidmem [ ( x + cols * y ) * 2 ] = c;
if ( ++x >= cols ) {
x = 0;
if ( ++y >= lines ) {
scroll();
y--;
}
}
}
}
SCREEN_INFO.orig_x = x;
SCREEN_INFO.orig_y = y;
pos = x + cols * y; /* Update cursor position */
while (!(inb_p(0x60) & 4));
outb_p(0x49, 0x62);
outb_p(pos & 0xff, 0x60);
outb_p((pos >> 8) & 0xff, 0x60);
}
static void* memset(void* s, int c, size_t n)
{
int i;
char *ss = (char*)s;
for (i=0;i<n;i++) ss[i] = c;
return s;
}
static void* memcpy(void* __dest, __const void* __src,
size_t __n)
{
int i;
char *d = (char *)__dest, *s = (char *)__src;
for (i=0;i<__n;i++) d[i] = s[i];
return __dest;
}
/* ===========================================================================
* Fill the input buffer. This is called only when the buffer is empty
* and at least one byte is really needed.
*/
static int fill_inbuf(void)
{
if (insize != 0) {
error("ran out of input data");
}
inbuf = input_data;
insize = input_len;
inptr = 1;
return inbuf[0];
}
/* ===========================================================================
* Write the output window window[0..outcnt-1] and update crc and bytes_out.
* (Used for the decompressed data only.)
*/
static void flush_window_low(void)
{
ulg c = crc; /* temporary variable */
unsigned n;
uch *in, *out, ch;
in = window;
out = &output_data[output_ptr];
for (n = 0; n < outcnt; n++) {
ch = *out++ = *in++;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
output_ptr += (ulg)outcnt;
outcnt = 0;
}
static void flush_window_high(void)
{
ulg c = crc; /* temporary variable */
unsigned n;
uch *in, ch;
in = window;
for (n = 0; n < outcnt; n++) {
ch = *output_data++ = *in++;
if ((ulg)output_data == low_buffer_end) output_data=high_buffer_start;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
outcnt = 0;
}
static void flush_window(void)
{
if (high_loaded) flush_window_high();
else flush_window_low();
}
static void error(char *x)
{
puts("\n\n");
puts(x);
puts("\n\n -- System halted");
while(1); /* Halt */
}
#define STACK_SIZE (4096)
long user_stack [STACK_SIZE];
struct {
long * a;
short b;
} stack_start = { & user_stack [STACK_SIZE] , __BOOT_DS };
static void setup_normal_output_buffer(void)
{
#ifdef STANDARD_MEMORY_BIOS_CALL
if (EXT_MEM_K < 1024) error("Less than 2MB of memory");
#else
if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024) error("Less than 2MB of memory");
#endif
output_data = (char *)0x100000; /* Points to 1M */
free_mem_end_ptr = (long)real_mode;
}
struct moveparams {
uch *low_buffer_start; int lcount;
uch *high_buffer_start; int hcount;
};
static void setup_output_buffer_if_we_run_high(struct moveparams *mv)
{
high_buffer_start = (uch *)(((ulg)&end) + HEAP_SIZE);
#ifdef STANDARD_MEMORY_BIOS_CALL
if (EXT_MEM_K < (3*1024)) error("Less than 4MB of memory");
#else
if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < (3*1024)) error("Less than 4MB of memory");
#endif
mv->low_buffer_start = output_data = (char *)LOW_BUFFER_START;
low_buffer_end = ((unsigned int)real_mode > LOW_BUFFER_MAX
? LOW_BUFFER_MAX : (unsigned int)real_mode) & ~0xfff;
low_buffer_size = low_buffer_end - LOW_BUFFER_START;
high_loaded = 1;
free_mem_end_ptr = (long)high_buffer_start;
if ( (0x100000 + low_buffer_size) > ((ulg)high_buffer_start)) {
high_buffer_start = (uch *)(0x100000 + low_buffer_size);
mv->hcount = 0; /* say: we need not to move high_buffer */
}
else mv->hcount = -1;
mv->high_buffer_start = high_buffer_start;
}
static void close_output_buffer_if_we_run_high(struct moveparams *mv)
{
if (bytes_out > low_buffer_size) {
mv->lcount = low_buffer_size;
if (mv->hcount)
mv->hcount = bytes_out - low_buffer_size;
} else {
mv->lcount = bytes_out;
mv->hcount = 0;
}
}
asmlinkage int decompress_kernel(struct moveparams *mv, void *rmode)
{
real_mode = rmode;
vidmem = (char *)(((unsigned int)SCREEN_INFO.orig_video_page) << 4);
lines = SCREEN_INFO.orig_video_lines;
cols = SCREEN_INFO.orig_video_cols;
if (free_mem_ptr < 0x100000) setup_normal_output_buffer();
else setup_output_buffer_if_we_run_high(mv);
makecrc();
puts("Uncompressing Linux... ");
gunzip();
puts("Ok, booting the kernel.\n");
if (high_loaded) close_output_buffer_if_we_run_high(mv);
return high_loaded;
}
/* We don't actually check for stack overflows this early. */
__asm__(".globl mcount ; mcount: ret\n");
arch/i386/boot98/compressed/vmlinux.scr deleted 100644 → 0
View file @ 352a763c
SECTIONS
{
.data : {
input_len = .;
LONG(input_data_end - input_data) input_data = .;
*(.data)
input_data_end = .;
}
}
arch/i386/boot98/tools/build.c deleted 100644 → 0
View file @ 352a763c
/*
* $Id: build.c,v 1.5 1997/05/19 12:29:58 mj Exp $
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 1997 Martin Mares
*/
/*
* This file builds a disk-image from three different files:
*
* - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
* - setup: 8086 machine code, sets up system parm
* - system: 80386 code for actual system
*
* It does some checking that all files are of the correct type, and
* just writes the result to stdout, removing headers and padding to
* the right amount. It also writes some system data to stderr.
*/
/*
* Changes by tytso to allow root device specification
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
* Cross compiling fixes by Gertjan van Wingerde, July 1996
* Rewritten by Martin Mares, April 1997
*/
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <stdarg.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/sysmacros.h>
#include <unistd.h>
#include <fcntl.h>
#include <asm/boot.h>
typedef unsigned char byte;
typedef unsigned short word;
typedef unsigned long u32;
#define DEFAULT_MAJOR_ROOT 0
#define DEFAULT_MINOR_ROOT 0
/* Minimal number of setup sectors (see also bootsect.S) */
#define SETUP_SECTS 4
byte buf[1024];
int fd;
int is_big_kernel;
void die(const char * str, ...)
{
va_list args;
va_start(args, str);
vfprintf(stderr, str, args);
fputc('\n', stderr);
exit(1);
}
void file_open(const char *name)
{
if ((fd = open(name, O_RDONLY, 0)) < 0)
die("Unable to open `%s': %m", name);
}
void usage(void)
{
die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
}
int main(int argc, char ** argv)
{
unsigned int i, c, sz, setup_sectors;
u32 sys_size;
byte major_root, minor_root;
struct stat sb;
if (argc > 2 && !strcmp(argv[1], "-b"))
{
is_big_kernel = 1;
argc--, argv++;
}
if ((argc < 4) || (argc > 5))
usage();
if (argc > 4) {
if (!strcmp(argv[4], "CURRENT")) {
if (stat("/", &sb)) {
perror("/");
die("Couldn't stat /");
}
major_root = major(sb.st_dev);
minor_root = minor(sb.st_dev);
} else if (strcmp(argv[4], "FLOPPY")) {
if (stat(argv[4], &sb)) {
perror(argv[4]);
die("Couldn't stat root device.");
}
major_root = major(sb.st_rdev);
minor_root = minor(sb.st_rdev);
} else {
major_root = 0;
minor_root = 0;
}
} else {
major_root = DEFAULT_MAJOR_ROOT;
minor_root = DEFAULT_MINOR_ROOT;
}
fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
file_open(argv[1]);
i = read(fd, buf, sizeof(buf));
fprintf(stderr,"Boot sector %d bytes.\n",i);
if (i != 512)
die("Boot block must be exactly 512 bytes");
if (buf[510] != 0x55 || buf[511] != 0xaa)
die("Boot block hasn't got boot flag (0xAA55)");
buf[508] = minor_root;
buf[509] = major_root;
if (write(1, buf, 512) != 512)
die("Write call failed");
close (fd);
file_open(argv[2]); /* Copy the setup code */
for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c )
if (write(1, buf, c) != c)
die("Write call failed");
if (c != 0)
die("read-error on `setup'");
close (fd);
setup_sectors = (i + 511) / 512; /* Pad unused space with zeros */
if (!(setup_sectors & 1))
setup_sectors++; /* setup_sectors must be odd on NEC PC-9800 */
fprintf(stderr, "Setup is %d bytes.\n", i);
memset(buf, 0, sizeof(buf));
while (i < setup_sectors * 512) {
c = setup_sectors * 512 - i;
if (c > sizeof(buf))
c = sizeof(buf);
if (write(1, buf, c) != c)
die("Write call failed");
i += c;
}
file_open(argv[3]);
if (fstat (fd, &sb))
die("Unable to stat `%s': %m", argv[3]);
sz = sb.st_size;
fprintf (stderr, "System is %d kB\n", sz/1024);
sys_size = (sz + 15) / 16;
/* 0x40000*16 = 4.0 MB, reasonable estimate for the current maximum */
if (sys_size > (is_big_kernel ? 0x40000 : DEF_SYSSIZE))
die("System is too big. Try using %smodules.",
is_big_kernel ? "" : "bzImage or ");
while (sz > 0) {
int l, n;
l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
if ((n=read(fd, buf, l)) != l) {
if (n < 0)
die("Error reading %s: %m", argv[3]);
else
die("%s: Unexpected EOF", argv[3]);
}
if (write(1, buf, l) != l)
die("Write failed");
sz -= l;
}
close(fd);
if (lseek(1, 497, SEEK_SET) != 497) /* Write sizes to the bootsector */
die("Output: seek failed");
buf[0] = setup_sectors;
if (write(1, buf, 1) != 1)
die("Write of setup sector count failed");
if (lseek(1, 500, SEEK_SET) != 500)
die("Output: seek failed");
buf[0] = (sys_size & 0xff);
buf[1] = ((sys_size >> 8) & 0xff);
if (write(1, buf, 2) != 2)
die("Write of image length failed");
return 0; /* Everything is OK */
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7