Skip to content

L
linux
Commit e285bca6 authored by Jarkko Nikula's avatar Jarkko Nikula Committed by Tony Lindgren
Browse files
Options

omap: mcbsp: Drop SPI mode support 

We haven't seen any use for the SPI API in McBSP driver over the years. More
over, Peter Ujfalusi <peter.ujfalusi@ti.com> noticed that SPI mode is not
even supported since OMAP2430 so it's very unlikely that we'll see any use
for it in the future either.
Signed-off-by: default avatarJarkko Nikula <jhnikula@gmail.com>
Acked-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent d19f579a
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 251 deletions
arch/arm/plat-omap/include/plat/mcbsp.h
View file @ e285bca6
......@@ -353,38 +353,6 @@ typedef enum {
OMAP_MCBSP_WORD_32,
} omap_mcbsp_word_length;
typedef enum {
OMAP_MCBSP_CLK_RISING = 0,
OMAP_MCBSP_CLK_FALLING,
} omap_mcbsp_clk_polarity;
typedef enum {
OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
OMAP_MCBSP_FS_ACTIVE_LOW,
} omap_mcbsp_fs_polarity;
typedef enum {
OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
OMAP_MCBSP_CLK_STP_MODE_DELAY,
} omap_mcbsp_clk_stp_mode;
/******* SPI specific mode **********/
typedef enum {
OMAP_MCBSP_SPI_MASTER = 0,
OMAP_MCBSP_SPI_SLAVE,
} omap_mcbsp_spi_mode;
struct omap_mcbsp_spi_cfg {
omap_mcbsp_spi_mode spi_mode;
omap_mcbsp_clk_polarity rx_clock_polarity;
omap_mcbsp_clk_polarity tx_clock_polarity;
omap_mcbsp_fs_polarity fsx_polarity;
u8 clk_div;
omap_mcbsp_clk_stp_mode clk_stp_mode;
omap_mcbsp_word_length word_length;
};
/* Platform specific configuration */
struct omap_mcbsp_ops {
void (*request)(unsigned int);
......@@ -504,14 +472,9 @@ u32 omap_mcbsp_recv_word(unsigned int id);
int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
/* McBSP functional clock source changing function */
extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id);
/* SPI specific API */
void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
/* Polled read/write functions */
int omap_mcbsp_pollread(unsigned int id, u16 * buf);
......
arch/arm/plat-omap/mcbsp.c
View file @ e285bca6
......@@ -1175,147 +1175,6 @@ u32 omap_mcbsp_recv_word(unsigned int id)
}
EXPORT_SYMBOL(omap_mcbsp_recv_word);
int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word)
{
struct omap_mcbsp *mcbsp;
omap_mcbsp_word_length tx_word_length;
omap_mcbsp_word_length rx_word_length;
u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
tx_word_length = mcbsp->tx_word_length;
rx_word_length = mcbsp->rx_word_length;
if (tx_word_length != rx_word_length)
return -EINVAL;
/* First we wait for the transmitter to be ready */
spcr2 = MCBSP_READ(mcbsp, SPCR2);
while (!(spcr2 & XRDY)) {
spcr2 = MCBSP_READ(mcbsp, SPCR2);
if (attempts++ > 1000) {
/* We must reset the transmitter */
MCBSP_WRITE(mcbsp, SPCR2,
MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST));
udelay(10);
MCBSP_WRITE(mcbsp, SPCR2,
MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST);
udelay(10);
dev_err(mcbsp->dev, "McBSP%d transmitter not "
"ready\n", mcbsp->id);
return -EAGAIN;
}
}
/* Now we can push the data */
if (tx_word_length > OMAP_MCBSP_WORD_16)
MCBSP_WRITE(mcbsp, DXR2, word >> 16);
MCBSP_WRITE(mcbsp, DXR1, word & 0xffff);
/* We wait for the receiver to be ready */
spcr1 = MCBSP_READ(mcbsp, SPCR1);
while (!(spcr1 & RRDY)) {
spcr1 = MCBSP_READ(mcbsp, SPCR1);
if (attempts++ > 1000) {
/* We must reset the receiver */
MCBSP_WRITE(mcbsp, SPCR1,
MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST));
udelay(10);
MCBSP_WRITE(mcbsp, SPCR1,
MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST);
udelay(10);
dev_err(mcbsp->dev, "McBSP%d receiver not "
"ready\n", mcbsp->id);
return -EAGAIN;
}
}
/* Receiver is ready, let's read the dummy data */
if (rx_word_length > OMAP_MCBSP_WORD_16)
word_msb = MCBSP_READ(mcbsp, DRR2);
word_lsb = MCBSP_READ(mcbsp, DRR1);
return 0;
}
EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll);
int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word)
{
struct omap_mcbsp *mcbsp;
u32 clock_word = 0;
omap_mcbsp_word_length tx_word_length;
omap_mcbsp_word_length rx_word_length;
u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return -ENODEV;
}
mcbsp = id_to_mcbsp_ptr(id);
tx_word_length = mcbsp->tx_word_length;
rx_word_length = mcbsp->rx_word_length;
if (tx_word_length != rx_word_length)
return -EINVAL;
/* First we wait for the transmitter to be ready */
spcr2 = MCBSP_READ(mcbsp, SPCR2);
while (!(spcr2 & XRDY)) {
spcr2 = MCBSP_READ(mcbsp, SPCR2);
if (attempts++ > 1000) {
/* We must reset the transmitter */
MCBSP_WRITE(mcbsp, SPCR2,
MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST));
udelay(10);
MCBSP_WRITE(mcbsp, SPCR2,
MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST);
udelay(10);
dev_err(mcbsp->dev, "McBSP%d transmitter not "
"ready\n", mcbsp->id);
return -EAGAIN;
}
}
/* We first need to enable the bus clock */
if (tx_word_length > OMAP_MCBSP_WORD_16)
MCBSP_WRITE(mcbsp, DXR2, clock_word >> 16);
MCBSP_WRITE(mcbsp, DXR1, clock_word & 0xffff);
/* We wait for the receiver to be ready */
spcr1 = MCBSP_READ(mcbsp, SPCR1);
while (!(spcr1 & RRDY)) {
spcr1 = MCBSP_READ(mcbsp, SPCR1);
if (attempts++ > 1000) {
/* We must reset the receiver */
MCBSP_WRITE(mcbsp, SPCR1,
MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST));
udelay(10);
MCBSP_WRITE(mcbsp, SPCR1,
MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST);
udelay(10);
dev_err(mcbsp->dev, "McBSP%d receiver not "
"ready\n", mcbsp->id);
return -EAGAIN;
}
}
/* Receiver is ready, there is something for us */
if (rx_word_length > OMAP_MCBSP_WORD_16)
word_msb = MCBSP_READ(mcbsp, DRR2);
word_lsb = MCBSP_READ(mcbsp, DRR1);
word[0] = (word_lsb | (word_msb << 16));
return 0;
}
EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll);
/*
* Simple DMA based buffer rx/tx routines.
* Nothing fancy, just a single buffer tx/rx through DMA.
......@@ -1449,79 +1308,6 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
}
EXPORT_SYMBOL(omap_mcbsp_recv_buffer);
/*
* SPI wrapper.
* Since SPI setup is much simpler than the generic McBSP one,
* this wrapper just need an omap_mcbsp_spi_cfg structure as an input.
* Once this is done, you can call omap_mcbsp_start().
*/
void omap_mcbsp_set_spi_mode(unsigned int id,
const struct omap_mcbsp_spi_cfg *spi_cfg)
{
struct omap_mcbsp *mcbsp;
struct omap_mcbsp_reg_cfg mcbsp_cfg;
if (!omap_mcbsp_check_valid_id(id)) {
printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
return;
}
mcbsp = id_to_mcbsp_ptr(id);
memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg));
/* SPI has only one frame */
mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0));
mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0));
/* Clock stop mode */
if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY)
mcbsp_cfg.spcr1 |= (1 << 12);
else
mcbsp_cfg.spcr1 |= (3 << 11);
/* Set clock parities */
if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING)
mcbsp_cfg.pcr0 |= CLKRP;
else
mcbsp_cfg.pcr0 &= ~CLKRP;
if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING)
mcbsp_cfg.pcr0 &= ~CLKXP;
else
mcbsp_cfg.pcr0 |= CLKXP;
/* Set SCLKME to 0 and CLKSM to 1 */
mcbsp_cfg.pcr0 &= ~SCLKME;
mcbsp_cfg.srgr2 |= CLKSM;
/* Set FSXP */
if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH)
mcbsp_cfg.pcr0 &= ~FSXP;
else
mcbsp_cfg.pcr0 |= FSXP;
if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) {
mcbsp_cfg.pcr0 |= CLKXM;
mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div - 1);
mcbsp_cfg.pcr0 |= FSXM;
mcbsp_cfg.srgr2 &= ~FSGM;
mcbsp_cfg.xcr2 |= XDATDLY(1);
mcbsp_cfg.rcr2 |= RDATDLY(1);
} else {
mcbsp_cfg.pcr0 &= ~CLKXM;
mcbsp_cfg.srgr1 |= CLKGDV(1);
mcbsp_cfg.pcr0 &= ~FSXM;
mcbsp_cfg.xcr2 &= ~XDATDLY(3);
mcbsp_cfg.rcr2 &= ~RDATDLY(3);
}
mcbsp_cfg.xcr2 &= ~XPHASE;
mcbsp_cfg.rcr2 &= ~RPHASE;
omap_mcbsp_config(id, &mcbsp_cfg);
}
EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
#ifdef CONFIG_ARCH_OMAP3
#define max_thres(m) (mcbsp->pdata->buffer_size)
#define valid_threshold(m, val) ((val) <= max_thres(m))
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7