drm/i915/dsi: improve dphy param limits logging

Move the limit checks near the calculations for each field, and actually
log the values that exceed limits.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419085940.21505-1-jani.nikula@intel.com

drivers/gpu/drm/i915/intel_dsi_vbt.c

@@ -647,6 +647,11 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 	/* prepare count */
 	prepare_cnt = DIV_ROUND_UP(ths_prepare_ns * ui_den, ui_num * mul);
 
+	if (prepare_cnt > PREPARE_CNT_MAX) {
+		DRM_DEBUG_KMS("prepare count too high %u\n", prepare_cnt);
+		prepare_cnt = PREPARE_CNT_MAX;
+	}
+
 	/* exit zero count */
 	exit_zero_cnt = DIV_ROUND_UP(
 				(ths_prepare_hszero - ths_prepare_ns) * ui_den,
@@ -662,32 +667,29 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
 	if (exit_zero_cnt < (55 * ui_den / ui_num) && (55 * ui_den) % ui_num)
 		exit_zero_cnt += 1;
 
+	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX) {
+		DRM_DEBUG_KMS("exit zero count too high %u\n", exit_zero_cnt);
+		exit_zero_cnt = EXIT_ZERO_CNT_MAX;
+	}
+
 	/* clk zero count */
 	clk_zero_cnt = DIV_ROUND_UP(
 				(tclk_prepare_clkzero -	ths_prepare_ns)
 				* ui_den, ui_num * mul);
 
+	if (clk_zero_cnt > CLK_ZERO_CNT_MAX) {
+		DRM_DEBUG_KMS("clock zero count too high %u\n", clk_zero_cnt);
+		clk_zero_cnt = CLK_ZERO_CNT_MAX;
+	}
+
 	/* trail count */
 	tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
 	trail_cnt = DIV_ROUND_UP(tclk_trail_ns * ui_den, ui_num * mul);
 
-	if (prepare_cnt > PREPARE_CNT_MAX ||
-		exit_zero_cnt > EXIT_ZERO_CNT_MAX ||
-		clk_zero_cnt > CLK_ZERO_CNT_MAX ||
-		trail_cnt > TRAIL_CNT_MAX)
-		DRM_DEBUG_DRIVER("Values crossing maximum limits, restricting to max values\n");
-
-	if (prepare_cnt > PREPARE_CNT_MAX)
-		prepare_cnt = PREPARE_CNT_MAX;
-
-	if (exit_zero_cnt > EXIT_ZERO_CNT_MAX)
-		exit_zero_cnt = EXIT_ZERO_CNT_MAX;
-
-	if (clk_zero_cnt > CLK_ZERO_CNT_MAX)
-		clk_zero_cnt = CLK_ZERO_CNT_MAX;
-
-	if (trail_cnt > TRAIL_CNT_MAX)
+	if (trail_cnt > TRAIL_CNT_MAX) {
+		DRM_DEBUG_KMS("trail count too high %u\n", trail_cnt);
 		trail_cnt = TRAIL_CNT_MAX;
+	}
 
 	/* B080 */
 	intel_dsi->dphy_reg = exit_zero_cnt << 24 | trail_cnt << 16 |