net: dsa: mv88e6xxx: Fix phylink_validate for Topaz family

The Topaz family should have different phylink_validate method from the
Peridot, since on Topaz the port supporting 2500BaseX mode is port 5,
not 9 and 10.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/mv88e6xxx/chip.c

@@ -658,6 +658,20 @@ static void mv88e6185_phylink_validate(struct mv88e6xxx_chip *chip, int port,
 	mv88e6065_phylink_validate(chip, port, mask, state);
 }
 
+static void mv88e6341_phylink_validate(struct mv88e6xxx_chip *chip, int port,
+				       unsigned long *mask,
+				       struct phylink_link_state *state)
+{
+	if (port >= 5)
+		phylink_set(mask, 2500baseX_Full);
+
+	/* No ethtool bits for 200Mbps */
+	phylink_set(mask, 1000baseT_Full);
+	phylink_set(mask, 1000baseX_Full);
+
+	mv88e6065_phylink_validate(chip, port, mask, state);
+}
+
 static void mv88e6352_phylink_validate(struct mv88e6xxx_chip *chip, int port,
 				       unsigned long *mask,
 				       struct phylink_link_state *state)
@@ -3079,7 +3093,7 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
 	.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
 	.serdes_power = mv88e6341_serdes_power,
 	.gpio_ops = &mv88e6352_gpio_ops,
-	.phylink_validate = mv88e6390_phylink_validate,
+	.phylink_validate = mv88e6341_phylink_validate,
 };
 
 static const struct mv88e6xxx_ops mv88e6161_ops = {
@@ -3711,7 +3725,7 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
 	.gpio_ops = &mv88e6352_gpio_ops,
 	.avb_ops = &mv88e6390_avb_ops,
 	.ptp_ops = &mv88e6352_ptp_ops,
-	.phylink_validate = mv88e6390_phylink_validate,
+	.phylink_validate = mv88e6341_phylink_validate,
 };
 
 static const struct mv88e6xxx_ops mv88e6350_ops = {