Commit e3da5b36 authored by Magnus Damm's avatar Magnus Damm Committed by Simon Horman

ARM: shmobile: Initial r7s72100 SoC support

Add initial support for the r7272100 SoC including:
 - Single Cortex-A9 CPU Core
 - GIC

No static virtual mappings are used, all the components
make use of ioremap(). DT_MACHINE_START is still wrapped
in CONFIG_USE_OF to match other mach-shmobile code.
Signed-off-by: default avatarMagnus Damm <damm@opensource.se>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent cd8344f4
/*
* Device Tree Source for the r7s72100 SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/ {
compatible = "renesas,r7s72100";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
};
gic: interrupt-controller@e8201000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0xe8201000 0x1000>,
<0xe8202000 0x1000>;
};
};
......@@ -113,6 +113,12 @@ config ARCH_EMEV2
select ARM_GIC
select CPU_V7
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
select ARM_GIC
select CPU_V7
select SH_CLK_CPG
comment "SH-Mobile Board Type"
config MACH_APE6EVM
......
......@@ -18,6 +18,7 @@ obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o setup-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o setup-rcar-gen2.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
# Clock objects
ifndef CONFIG_COMMON_CLK
......@@ -31,6 +32,7 @@ obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o
obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o
obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o
endif
# SMP objects
......
/*
* r7a72100 clock framework support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2012 Phil Edworthy
* Copyright (C) 2011 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/common.h>
#include <mach/r7s72100.h>
/* registers */
#define FRQCR 0xfcfe0010
#define FRQCR2 0xfcfe0014
#define STBCR3 0xfcfe0420
#define STBCR4 0xfcfe0424
#define PLL_RATE 30
static struct clk_mapping cpg_mapping = {
.phys = 0xfcfe0000,
.len = 0x1000,
};
/* Fixed 32 KHz root clock for RTC */
static struct clk r_clk = {
.rate = 32768,
};
/*
* Default rate for the root input clock, reset this with clk_set_rate()
* from the platform code.
*/
static struct clk extal_clk = {
.rate = 13330000,
.mapping = &cpg_mapping,
};
static unsigned long pll_recalc(struct clk *clk)
{
return clk->parent->rate * PLL_RATE;
}
static struct sh_clk_ops pll_clk_ops = {
.recalc = pll_recalc,
};
static struct clk pll_clk = {
.ops = &pll_clk_ops,
.parent = &extal_clk,
.flags = CLK_ENABLE_ON_INIT,
};
static unsigned long bus_recalc(struct clk *clk)
{
return clk->parent->rate * 2 / 3;
}
static struct sh_clk_ops bus_clk_ops = {
.recalc = bus_recalc,
};
static struct clk bus_clk = {
.ops = &bus_clk_ops,
.parent = &pll_clk,
.flags = CLK_ENABLE_ON_INIT,
};
static unsigned long peripheral0_recalc(struct clk *clk)
{
return clk->parent->rate / 12;
}
static struct sh_clk_ops peripheral0_clk_ops = {
.recalc = peripheral0_recalc,
};
static struct clk peripheral0_clk = {
.ops = &peripheral0_clk_ops,
.parent = &pll_clk,
.flags = CLK_ENABLE_ON_INIT,
};
static unsigned long peripheral1_recalc(struct clk *clk)
{
return clk->parent->rate / 6;
}
static struct sh_clk_ops peripheral1_clk_ops = {
.recalc = peripheral1_recalc,
};
static struct clk peripheral1_clk = {
.ops = &peripheral1_clk_ops,
.parent = &pll_clk,
.flags = CLK_ENABLE_ON_INIT,
};
struct clk *main_clks[] = {
&r_clk,
&extal_clk,
&pll_clk,
&bus_clk,
&peripheral0_clk,
&peripheral1_clk,
};
static int div2[] = { 1, 3, 0, 3 }; /* 1, 2/3, reserve, 1/3 */
static int multipliers[] = { 1, 2, 1, 1 };
static struct clk_div_mult_table div4_div_mult_table = {
.divisors = div2,
.nr_divisors = ARRAY_SIZE(div2),
.multipliers = multipliers,
.nr_multipliers = ARRAY_SIZE(multipliers),
};
static struct clk_div4_table div4_table = {
.div_mult_table = &div4_div_mult_table,
};
enum { DIV4_I,
DIV4_NR };
#define DIV4(_reg, _bit, _mask, _flags) \
SH_CLK_DIV4(&pll_clk, _reg, _bit, _mask, _flags)
/* The mask field specifies the div2 entries that are valid */
struct clk div4_clks[DIV4_NR] = {
[DIV4_I] = DIV4(FRQCR, 8, 0xB, CLK_ENABLE_REG_16BIT
| CLK_ENABLE_ON_INIT),
};
enum { MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
MSTP33, MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
[MSTP44] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 4, 0), /* SCIF3 */
[MSTP43] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 3, 0), /* SCIF4 */
[MSTP42] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 2, 0), /* SCIF5 */
[MSTP41] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 1, 0), /* SCIF6 */
[MSTP40] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 0, 0), /* SCIF7 */
[MSTP33] = SH_CLK_MSTP8(&peripheral0_clk, STBCR3, 3, 0), /* MTU2 */
};
static struct clk_lookup lookups[] = {
/* main clocks */
CLKDEV_CON_ID("rclk", &r_clk),
CLKDEV_CON_ID("extal", &extal_clk),
CLKDEV_CON_ID("pll_clk", &pll_clk),
CLKDEV_CON_ID("peripheral_clk", &peripheral1_clk),
/* DIV4 clocks */
CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
/* MSTP clocks */
};
void __init r7s72100_clock_init(void)
{
int k, ret = 0;
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
if (!ret)
shmobile_clk_init();
else
panic("failed to setup rza1 clocks\n");
}
#ifndef __ASM_R7S72100_H__
#define __ASM_R7S72100_H__
void r7s72100_clock_init(void);
void r7s72100_init_early(void);
#endif /* __ASM_R7S72100_H__ */
/*
* r7s72100 processor support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <mach/common.h>
#include <mach/r7s72100.h>
#include <asm/mach/arch.h>
void __init r7s72100_init_early(void)
{
shmobile_setup_delay(400, 1, 3); /* Cortex-A9 @ 400MHz */
}
#ifdef CONFIG_USE_OF
static const char *r7s72100_boards_compat_dt[] __initdata = {
"renesas,r7s72100",
NULL,
};
DT_MACHINE_START(R7S72100_DT, "Generic R7S72100 (Flattened Device Tree)")
.init_early = r7s72100_init_early,
.dt_compat = r7s72100_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment