Input: stmpe-ts - enforce device tree only mode

The STMPE MFD is only used with device tree configured systems (and STMPE
MFD core depends on OF), so force the configuration to come from device
tree only.
Tested-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

drivers/input/touchscreen/Kconfig

@@ -958,6 +958,7 @@ config TOUCHSCREEN_ST1232
 config TOUCHSCREEN_STMPE
 	tristate "STMicroelectronics STMPE touchscreens"
 	depends on MFD_STMPE
+	depends on (OF || COMPILE_TEST)
 	help
 	  Say Y here if you want support for STMicroelectronics
 	  STMPE touchscreen controllers.

drivers/input/touchscreen/stmpe-ts.c

@@ -267,27 +267,10 @@ static void stmpe_ts_close(struct input_dev *dev)
 static void stmpe_ts_get_platform_info(struct platform_device *pdev,
 					struct stmpe_touch *ts)
 {
-	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
 	struct device_node *np = pdev->dev.of_node;
-	struct stmpe_ts_platform_data *ts_pdata = NULL;
-
-	ts->stmpe = stmpe;
-
-	if (stmpe->pdata && stmpe->pdata->ts) {
-		ts_pdata = stmpe->pdata->ts;
-
-		ts->sample_time = ts_pdata->sample_time;
-		ts->mod_12b = ts_pdata->mod_12b;
-		ts->ref_sel = ts_pdata->ref_sel;
-		ts->adc_freq = ts_pdata->adc_freq;
-		ts->ave_ctrl = ts_pdata->ave_ctrl;
-		ts->touch_det_delay = ts_pdata->touch_det_delay;
-		ts->settling = ts_pdata->settling;
-		ts->fraction_z = ts_pdata->fraction_z;
-		ts->i_drive = ts_pdata->i_drive;
-	} else if (np) {
-		u32 val;
+	u32 val;
 
+	if (np) {
 		if (!of_property_read_u32(np, "st,sample-time", &val))
 			ts->sample_time = val;
 		if (!of_property_read_u32(np, "st,mod-12b", &val))
@@ -311,6 +294,7 @@ static void stmpe_ts_get_platform_info(struct platform_device *pdev,
 
 static int stmpe_input_probe(struct platform_device *pdev)
 {
+	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
 	struct stmpe_touch *ts;
 	struct input_dev *idev;
 	int error;
@@ -329,6 +313,7 @@ static int stmpe_input_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	platform_set_drvdata(pdev, ts);
+	ts->stmpe = stmpe;
 	ts->idev = idev;
 	ts->dev = &pdev->dev;
 
@@ -351,14 +336,13 @@ static int stmpe_input_probe(struct platform_device *pdev)
 	idev->name = STMPE_TS_NAME;
 	idev->phys = STMPE_TS_NAME"/input0";
 	idev->id.bustype = BUS_I2C;
-	idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 
 	idev->open = stmpe_ts_open;
 	idev->close = stmpe_ts_close;
 
 	input_set_drvdata(idev, ts);
 
+	input_set_capability(idev, EV_KEY, BTN_TOUCH);
 	input_set_abs_params(idev, ABS_X, 0, XY_MASK, 0, 0);
 	input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0);
 	input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0);
@@ -390,15 +374,12 @@ static struct platform_driver stmpe_ts_driver = {
 };
 module_platform_driver(stmpe_ts_driver);
 
-#ifdef CONFIG_OF
 static const struct of_device_id stmpe_ts_ids[] = {
 	{ .compatible = "st,stmpe-ts", },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, stmpe_ts_ids);
-#endif
 
 MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
 MODULE_DESCRIPTION("STMPEXXX touchscreen driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:" STMPE_TS_NAME);

include/linux/mfd/stmpe.h

@@ -117,47 +117,6 @@ extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks);
 
 #define STMPE_GPIO_NOREQ_811_TOUCH	(0xf0)
 
-/**
- * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform
- * data
- * @sample_time: ADC converstion time in number of clock.
- * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
- * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
- * recommended is 4.
- * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
- * @ref_sel: ADC reference source
- * (0 -> internal reference, 1 -> external reference)
- * @adc_freq: ADC Clock speed
- * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
- * @ave_ctrl: Sample average control
- * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
- * @touch_det_delay: Touch detect interrupt delay
- * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us,
- * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms)
- * recommended is 3
- * @settling: Panel driver settling time
- * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms,
- * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms)
- * recommended is 2
- * @fraction_z: Length of the fractional part in z
- * (fraction_z ([0..7]) = Count of the fractional part)
- * recommended is 7
- * @i_drive: current limit value of the touchscreen drivers
- * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max)
- *
- * */
-struct stmpe_ts_platform_data {
-       u8 sample_time;
-       u8 mod_12b;
-       u8 ref_sel;
-       u8 adc_freq;
-       u8 ave_ctrl;
-       u8 touch_det_delay;
-       u8 settling;
-       u8 fraction_z;
-       u8 i_drive;
-};
-
 /**
  * struct stmpe_platform_data - STMPE platform data
  * @id: device id to distinguish between multiple STMPEs on the same board
@@ -168,7 +127,6 @@ struct stmpe_ts_platform_data {
  * @irq_over_gpio: true if gpio is used to get irq
  * @irq_gpio: gpio number over which irq will be requested (significant only if
  *	      irq_over_gpio is true)
- * @ts: touchscreen-specific platform data
  */
 struct stmpe_platform_data {
 	int id;
@@ -178,8 +136,6 @@ struct stmpe_platform_data {
 	bool irq_over_gpio;
 	int irq_gpio;
 	int autosleep_timeout;
-
-	struct stmpe_ts_platform_data *ts;
 };
 
 #endif