Commit e54ea45a authored by Dilip Kota's avatar Dilip Kota Committed by Lorenzo Pieralisi

dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller

Add YAML schemas for PCIe RC controller on Intel Gateway SoCs
which is Synopsys DesignWare based PCIe core.
Signed-off-by: default avatarDilip Kota <eswara.kota@linux.intel.com>
Signed-off-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: default avatarAndrew Murray <andrew.murray@arm.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
parent e42617b8
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: PCIe RC controller on Intel Gateway SoCs
maintainers:
- Dilip Kota <eswara.kota@linux.intel.com>
properties:
compatible:
items:
- const: intel,lgm-pcie
- const: snps,dw-pcie
device_type:
const: pci
"#address-cells":
const: 3
"#size-cells":
const: 2
reg:
items:
- description: Controller control and status registers.
- description: PCIe configuration registers.
- description: Controller application registers.
reg-names:
items:
- const: dbi
- const: config
- const: app
ranges:
maxItems: 1
resets:
maxItems: 1
clocks:
maxItems: 1
phys:
maxItems: 1
phy-names:
const: pcie
reset-gpios:
maxItems: 1
linux,pci-domain: true
num-lanes:
maximum: 2
description: Number of lanes to use for this port.
'#interrupt-cells':
const: 1
interrupt-map-mask:
description: Standard PCI IRQ mapping properties.
interrupt-map:
description: Standard PCI IRQ mapping properties.
max-link-speed:
description: Specify PCI Gen for link capability.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [ 1, 2, 3, 4 ]
- default: 1
bus-range:
description: Range of bus numbers associated with this controller.
reset-assert-ms:
description: |
Delay after asserting reset to the PCIe device.
maximum: 500
default: 100
required:
- compatible
- device_type
- "#address-cells"
- "#size-cells"
- reg
- reg-names
- ranges
- resets
- clocks
- phys
- phy-names
- reset-gpios
- '#interrupt-cells'
- interrupt-map
- interrupt-map-mask
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/intel,lgm-clk.h>
pcie10: pcie@d0e00000 {
compatible = "intel,lgm-pcie", "snps,dw-pcie";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
reg = <0xd0e00000 0x1000>,
<0xd2000000 0x800000>,
<0xd0a41000 0x1000>;
reg-names = "dbi", "config", "app";
linux,pci-domain = <0>;
max-link-speed = <4>;
bus-range = <0x00 0x08>;
interrupt-parent = <&ioapic1>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &ioapic1 27 1>,
<0 0 0 2 &ioapic1 28 1>,
<0 0 0 3 &ioapic1 29 1>,
<0 0 0 4 &ioapic1 30 1>;
ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
resets = <&rcu0 0x50 0>;
clocks = <&cgu0 LGM_GCLK_PCIE10>;
phys = <&cb0phy0>;
phy-names = "pcie";
reset-assert-ms = <500>;
reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
num-lanes = <2>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment