ath5k: remove the use of SWI interrupt

We don't need to generate a software interrupt (SWI) just to schedule a tasklet
- we can just schedule the tasklet directly.

Rename constants, names, etc to reflect the fact that we don't use SWI any more.

Also move the flag handling into the tasklet and prepare it to behave correctly
when there are multiple flags present.
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath5k/ath5k.h

@@ -890,10 +890,10 @@ enum ath5k_int {
 	AR5K_INT_NOCARD	= 0xffffffff
 };
 
-/* Software interrupts used for calibration */
-enum ath5k_software_interrupt {
-	AR5K_SWI_FULL_CALIBRATION = 0x01,
-	AR5K_SWI_SHORT_CALIBRATION = 0x02,
+/* mask which calibration is active at the moment */
+enum ath5k_calibration_mask {
+	AR5K_CALIBRATION_FULL = 0x01,
+	AR5K_CALIBRATION_SHORT = 0x02,
 };
 
 /*
@@ -1102,8 +1102,8 @@ struct ath5k_hw {
 	/* Calibration timestamp */
 	unsigned long		ah_cal_tstamp;
 
-	/* Software interrupt mask */
-	u8			ah_swi_mask;
+	/* Calibration mask */
+	u8			ah_cal_mask;
 
 	/*
 	 * Function pointers

drivers/net/wireless/ath/ath5k/base.c

@@ -2507,7 +2507,7 @@ ath5k_init(struct ath5k_softc *sc)
 	sc->curband = &sc->sbands[sc->curchan->band];
 	sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
 		AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
-		AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_SWI;
+		AR5K_INT_FATAL | AR5K_INT_GLOBAL;
 	ret = ath5k_reset(sc, NULL);
 	if (ret)
 		goto done;
@@ -2673,9 +2673,6 @@ ath5k_intr(int irq, void *dev_id)
 			if (status & AR5K_INT_BMISS) {
 				/* TODO */
 			}
-			if (status & AR5K_INT_SWI) {
-				tasklet_schedule(&sc->calib);
-			}
 			if (status & AR5K_INT_MIB) {
 				/*
 				 * These stats are also used for ANI i think
@@ -2716,8 +2713,7 @@ ath5k_tasklet_calibrate(unsigned long data)
 	struct ath5k_hw *ah = sc->ah;
 
 	/* Only full calibration for now */
-	if (ah->ah_swi_mask != AR5K_SWI_FULL_CALIBRATION)
-		return;
+	ah->ah_cal_mask |= AR5K_CALIBRATION_FULL;
 
 	/* Stop queues so that calibration
 	 * doesn't interfere with tx */
@@ -2740,11 +2736,10 @@ ath5k_tasklet_calibrate(unsigned long data)
 			ieee80211_frequency_to_channel(
 				sc->curchan->center_freq));
 
-	ah->ah_swi_mask = 0;
-
 	/* Wake queues */
 	ieee80211_wake_queues(sc->hw);
 
+	ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL;
 }
 
 

drivers/net/wireless/ath/ath5k/phy.c

@@ -1119,8 +1119,7 @@ ath5k_hw_calibration_poll(struct ath5k_hw *ah)
 	 * interrupt (bit gets auto-cleared) */
 	if (time_is_before_eq_jiffies(ah->ah_cal_tstamp + cal_intval)) {
 		ah->ah_cal_tstamp = jiffies;
-		ah->ah_swi_mask = AR5K_SWI_FULL_CALIBRATION;
-		AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI);
+		tasklet_schedule(&ah->ah_sc->calib);
 	}
 }