Commit e6811d1d authored by Laxman Dewangan's avatar Laxman Dewangan Committed by Mark Brown

spi: make sure all transfer has bits_per_word set

When spi client does the spi transfer and does not sets
the bits_per_word for each transfer then set it as default
of spi device in spi core before calling low level transfer.

Removing the similar code from spi-tegra20-slink driver as
it is not required.
Signed-off-by: default avatarLaxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent dc4dc360
......@@ -727,8 +727,7 @@ static int tegra_slink_start_transfer_one(struct spi_device *spi,
unsigned long command;
unsigned long command2;
bits_per_word = t->bits_per_word ? t->bits_per_word :
spi->bits_per_word;
bits_per_word = t->bits_per_word;
speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz;
if (!speed)
speed = tspi->spi_max_frequency;
......
......@@ -1190,6 +1190,7 @@ EXPORT_SYMBOL_GPL(spi_setup);
static int __spi_async(struct spi_device *spi, struct spi_message *message)
{
struct spi_master *master = spi->master;
struct spi_transfer *xfer;
/* Half-duplex links include original MicroWire, and ones with
* only one data pin like SPI_3WIRE (switches direction) or where
......@@ -1198,7 +1199,6 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message)
*/
if ((master->flags & SPI_MASTER_HALF_DUPLEX)
|| (spi->mode & SPI_3WIRE)) {
struct spi_transfer *xfer;
unsigned flags = master->flags;
list_for_each_entry(xfer, &message->transfers, transfer_list) {
......@@ -1211,6 +1211,15 @@ static int __spi_async(struct spi_device *spi, struct spi_message *message)
}
}
/**
* Set transfer bits_per_word as spi device default if it is not
* set for this transfer.
*/
list_for_each_entry(xfer, &message->transfers, transfer_list) {
if (!xfer->bits_per_word)
xfer->bits_per_word = spi->bits_per_word;
}
message->spi = spi;
message->status = -EINPROGRESS;
return master->transfer(spi, message);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment