sh: Support explicit L1 cache disabling.

This reworks the cache mode configuration in Kconfig, and allows for
explicit selection of write-back/write-through/off configurations.
All of the cache flushing routines are optimized away for the off
case.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/kernel/cpu/init.c

@@ -143,12 +143,15 @@ static void __init cache_init(void)
 		flags &= ~CCR_CACHE_EMODE;
 #endif
 
-#ifdef CONFIG_SH_WRITETHROUGH
-	/* Turn on Write-through caching */
+#if defined(CONFIG_CACHE_WRITETHROUGH)
+	/* Write-through */
 	flags |= CCR_CACHE_WT;
-#else
-	/* .. or default to Write-back */
+#elif defined(CONFIG_CACHE_WRITEBACK)
+	/* Write-back */
 	flags |= CCR_CACHE_CB;
+#else
+	/* Off */
+	flags &= ~CCR_CACHE_ENABLE;
 #endif
 
 	ctrl_outl(flags, CCR);

arch/sh/kernel/sh_ksyms.c

@@ -128,7 +128,8 @@ DECLARE_EXPORT(__movstrSI12_i4);
 #endif /* __GNUC__ == 4 */
 #endif
 
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
+#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
+	defined(CONFIG_SH7705_CACHE_32KB))
 /* needed by some modules */
 EXPORT_SYMBOL(flush_cache_all);
 EXPORT_SYMBOL(flush_cache_range);
@@ -136,8 +137,8 @@ EXPORT_SYMBOL(flush_dcache_page);
 EXPORT_SYMBOL(__flush_purge_region);
 #endif
 
-#if defined(CONFIG_MMU) && (defined(CONFIG_CPU_SH4) || \
-	defined(CONFIG_SH7705_CACHE_32KB))
+#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
+	(defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB))
 EXPORT_SYMBOL(clear_user_page);
 #endif
 

arch/sh/mm/Kconfig

@@ -2,7 +2,6 @@
 # Processor families
 #
 config CPU_SH2
-	select SH_WRITETHROUGH if !CPU_SH2A
 	bool
 
 config CPU_SH2A
@@ -414,8 +413,17 @@ config SH_DIRECT_MAPPED
 	  Turn this option off for platforms that do not have a direct-mapped
 	  cache, and you have no need to run the caches in such a configuration.
 
-config SH_WRITETHROUGH
-	bool "Use write-through caching"
+choice
+	prompt "Cache mode"
+	default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4
+	default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A)
+
+config CACHE_WRITEBACK
+	bool "Write-back"
+	depends on CPU_SH2A || CPU_SH3 || CPU_SH4
+
+config CACHE_WRITETHROUGH
+	bool "Write-through"
 	help
 	  Selecting this option will configure the caches in write-through
 	  mode, as opposed to the default write-back configuration.
@@ -426,4 +434,9 @@ config SH_WRITETHROUGH
 
 	  If unsure, say N.
 
+config CACHE_OFF
+	bool "Off"
+
+endchoice
+
 endmenu

arch/sh/mm/Makefile

@@ -4,9 +4,10 @@
 
 obj-y			:= init.o extable.o consistent.o
 
-obj-$(CONFIG_CPU_SH2)	+= cache-sh2.o
-obj-$(CONFIG_CPU_SH3)	+= cache-sh3.o
-obj-$(CONFIG_CPU_SH4)	+= cache-sh4.o
+cache-$(CONFIG_CPU_SH2)		:= cache-sh2.o
+cache-$(CONFIG_CPU_SH3)		:= cache-sh3.o
+cache-$(CONFIG_CPU_SH4)		:= cache-sh4.o pg-sh4.o
+cache-$(CONFIG_CACHE_OFF)	:=
 
 mmu-y			:= tlb-nommu.o pg-nommu.o
 mmu-$(CONFIG_CPU_SH3)	+= fault-nommu.o
@@ -14,7 +15,7 @@ mmu-$(CONFIG_CPU_SH4)	+= fault-nommu.o
 mmu-$(CONFIG_MMU)	:= fault.o clear_page.o copy_page.o tlb-flush.o	\
 			   ioremap.o
 
-obj-y			+= $(mmu-y)
+obj-y			+= $(cache-y) $(mmu-y)
 
 ifdef CONFIG_DEBUG_FS
 obj-$(CONFIG_CPU_SH4)		+= cache-debugfs.o
@@ -22,7 +23,7 @@ endif
 
 ifdef CONFIG_MMU
 obj-$(CONFIG_CPU_SH3)		+= tlb-sh3.o
-obj-$(CONFIG_CPU_SH4)		+= tlb-sh4.o pg-sh4.o
+obj-$(CONFIG_CPU_SH4)		+= tlb-sh4.o
 obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o
 endif
 

arch/sh/mm/pmb.c

@@ -145,7 +145,7 @@ int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
 
 	ctrl_outl(vpn | PMB_V, mk_pmb_addr(pos));
 
-#ifdef CONFIG_SH_WRITETHROUGH
+#ifdef CONFIG_CACHE_WRITETHROUGH
 	/*
 	 * When we are in 32-bit address extended mode, CCR.CB becomes
 	 * invalid, so care must be taken to manually adjust cacheable

arch/sh/mm/tlb-sh4.c

@@ -34,22 +34,27 @@ void update_mmu_cache(struct vm_area_struct * vma,
 	unsigned long flags;
 	unsigned long pteval;
 	unsigned long vpn;
-	struct page *page;
-	unsigned long pfn;
 
 	/* Ptrace may call this routine. */
 	if (vma && current->active_mm != vma->vm_mm)
 		return;
 
-	pfn = pte_pfn(pte);
-	if (pfn_valid(pfn)) {
-		page = pfn_to_page(pfn);
-		if (!test_bit(PG_mapped, &page->flags)) {
-			unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
-			__flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE);
-			__set_bit(PG_mapped, &page->flags);
+#ifndef CONFIG_CACHE_OFF
+	{
+		unsigned long pfn = pte_pfn(pte);
+
+		if (pfn_valid(pfn)) {
+			struct page *page = pfn_to_page(pfn);
+
+			if (!test_bit(PG_mapped, &page->flags)) {
+				unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
+				__flush_wback_region((void *)P1SEGADDR(phys),
+						     PAGE_SIZE);
+				__set_bit(PG_mapped, &page->flags);
+			}
 		}
 	}
+#endif
 
 	local_irq_save(flags);
 
@@ -66,7 +71,7 @@ void update_mmu_cache(struct vm_area_struct * vma,
 
 	/* Set PTEL register */
 	pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
-#ifdef CONFIG_SH_WRITETHROUGH
+#ifdef CONFIG_CACHE_WRITETHROUGH
 	pteval |= _PAGE_WT;
 #endif
 	/* conveniently, we want all the software flags to be 0 anyway */

include/asm-sh/cacheflush.h

 #ifndef __ASM_SH_CACHEFLUSH_H
 #define __ASM_SH_CACHEFLUSH_H
+
 #ifdef __KERNEL__
 
-#include <linux/mm.h>
+#ifdef CONFIG_CACHE_OFF
+/*
+ * Nothing to do when the cache is disabled, initial flush and explicit
+ * disabling is handled at CPU init time.
+ *
+ * See arch/sh/kernel/cpu/init.c:cache_init().
+ */
+#define p3_cache_init()				do { } while (0)
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define __flush_wback_region(start, size)	do { (void)(start); } while (0)
+#define __flush_purge_region(start, size)	do { (void)(start); } while (0)
+#define __flush_invalidate_region(start, size)	do { (void)(start); } while (0)
+#else
 #include <asm/cpu/cacheflush.h>
 
+/*
+ * Consistent DMA requires that the __flush_xxx() primitives must be set
+ * for any of the enabled non-coherent caches (most of the UP CPUs),
+ * regardless of PIPT or VIPT cache configurations.
+ */
+
 /* Flush (write-back only) a region (smaller than a page) */
 extern void __flush_wback_region(void *start, int size);
 /* Flush (write-back & invalidate) a region (smaller than a page) */
 extern void __flush_purge_region(void *start, int size);
 /* Flush (invalidate only) a region (smaller than a page) */
 extern void __flush_invalidate_region(void *start, int size);
+#endif
 
 #define flush_cache_vmap(start, end)		flush_cache_all()
 #define flush_cache_vunmap(start, end)		flush_cache_all()

include/asm-sh/page.h

@@ -70,14 +70,14 @@ extern void clear_page_nommu(void *to);
 extern void copy_page_nommu(void *to, void *from);
 #endif
 
-#if defined(CONFIG_MMU) && (defined(CONFIG_CPU_SH4) || \
-	defined(CONFIG_SH7705_CACHE_32KB))
+#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
+	(defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB))
 struct page;
 extern void clear_user_page(void *to, unsigned long address, struct page *pg);
 extern void copy_user_page(void *to, void *from, unsigned long address, struct page *pg);
 extern void __clear_user_page(void *to, void *orig_to);
 extern void __copy_user_page(void *to, void *from, void *orig_to);
-#elif defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH3) || !defined(CONFIG_MMU)
+#else
 #define clear_user_page(page, vaddr, pg)	clear_page(page)
 #define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
 #endif

include/asm-sh/pgtable.h

@@ -563,7 +563,8 @@ struct mm_struct;
 extern unsigned int kobjsize(const void *objp);
 #endif /* !CONFIG_MMU */
 
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
+#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
+	defined(CONFIG_SH7705_CACHE_32KB))
 #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
 extern pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
 #endif