ARM: cns3xxx: Add CNS3420 Validation Board support

This patch adds support for CNS3420VB rev 1.3 boards. With this patch
CNS3420VB boards are able to boot up to the userspace, with a console
available on UART0.
Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>

arch/arm/mach-cns3xxx/Kconfig

 menu "CNS3XXX platform type"
 	depends on ARCH_CNS3XXX
 
+config MACH_CNS3420VB
+	bool "Support for CNS3420 Validation Board"
+	help
+	  Include support for the Cavium Networks CNS3420 MPCore Platform
+	  Baseboard.
+	  This is a platform with an on-board ARM11 MPCore and has support
+	  for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
+
 endmenu

arch/arm/mach-cns3xxx/Makefile

 obj-$(CONFIG_ARCH_CNS3XXX)		+= core.o pm.o
+obj-$(CONFIG_MACH_CNS3420VB)		+= cns3420vb.o

arch/arm/mach-cns3xxx/cns3420vb.c

+/*
+ * Cavium Networks CNS3420 Validation Board
+ *
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2008 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *		  Scott Shu
+ * Copyright 2010 MontaVista Software, LLC.
+ *		  Anton Vorontsov <avorontsov@mvista.com>
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/cns3xxx.h>
+#include <mach/irqs.h>
+#include "core.h"
+
+/*
+ * NOR Flash
+ */
+static struct mtd_partition cns3420_nor_partitions[] = {
+	{
+		.name		= "uboot",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.size		= 0x004C0000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "filesystem",
+		.size		= 0x7000000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "filesystem2",
+		.size		= 0x0AE0000,
+		.offset		= MTDPART_OFS_APPEND,
+	}, {
+		.name		= "ubootenv",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data cns3420_nor_pdata = {
+	.width = 2,
+	.parts = cns3420_nor_partitions,
+	.nr_parts = ARRAY_SIZE(cns3420_nor_partitions),
+};
+
+static struct resource cns3420_nor_res = {
+	.start = CNS3XXX_FLASH_BASE,
+	.end = CNS3XXX_FLASH_BASE + SZ_128M - 1,
+	.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct platform_device cns3420_nor_pdev = {
+	.name = "physmap-flash",
+	.id = 0,
+	.resource = &cns3420_nor_res,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &cns3420_nor_pdata,
+	},
+};
+
+/*
+ * UART
+ */
+static void __init cns3420_early_serial_setup(void)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	static struct uart_port cns3420_serial_port = {
+		.membase        = (void __iomem *)CNS3XXX_UART0_BASE_VIRT,
+		.mapbase        = CNS3XXX_UART0_BASE,
+		.irq            = IRQ_CNS3XXX_UART0,
+		.iotype         = UPIO_MEM,
+		.flags          = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.regshift       = 2,
+		.uartclk        = 24000000,
+		.line           = 0,
+		.type           = PORT_16550A,
+		.fifosize       = 16,
+	};
+
+	early_serial_setup(&cns3420_serial_port);
+#endif
+}
+
+/*
+ * Initialization
+ */
+static struct platform_device *cns3420_pdevs[] __initdata = {
+	&cns3420_nor_pdev,
+};
+
+static void __init cns3420_init(void)
+{
+	platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
+
+	pm_power_off = cns3xxx_power_off;
+}
+
+static struct map_desc cns3420_io_desc[] __initdata = {
+	{
+		.virtual	= CNS3XXX_UART0_BASE_VIRT,
+		.pfn		= __phys_to_pfn(CNS3XXX_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init cns3420_map_io(void)
+{
+	cns3xxx_map_io();
+	iotable_init(cns3420_io_desc, ARRAY_SIZE(cns3420_io_desc));
+
+	cns3420_early_serial_setup();
+}
+
+MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
+	.phys_io	= CNS3XXX_UART0_BASE,
+	.io_pg_offst	= (CNS3XXX_UART0_BASE_VIRT >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= cns3420_map_io,
+	.init_irq	= cns3xxx_init_irq,
+	.timer		= &cns3xxx_timer,
+	.init_machine	= cns3420_init,
+MACHINE_END