USB: emi62.c: remove err() usage

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/misc/emi62.c

@@ -56,7 +56,7 @@ static int emi62_writememory(struct usb_device *dev, int address,
 	unsigned char *buffer =  kmemdup(data, length, GFP_KERNEL);
 
 	if (!buffer) {
-		err("emi62: kmalloc(%d) failed.", length);
+		dev_err(&dev->dev, "kmalloc(%d) failed.\n", length);
 		return -ENOMEM;
 	}
 	/* Note: usb_control_msg returns negative value on error or length of the
@@ -73,9 +73,8 @@ static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit)
 	dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit);
 	
 	response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
-	if (response < 0) {
-		err("emi62: set_reset (%d) failed", reset_bit);
-	}
+	if (response < 0)
+		dev_err(&dev->dev, "set_reset (%d) failed\n", reset_bit);
 	return response;
 }
 
@@ -87,18 +86,15 @@ static int emi62_load_firmware (struct usb_device *dev)
 	const struct firmware *bitstream_fw = NULL;
 	const struct firmware *firmware_fw = NULL;
 	const struct ihex_binrec *rec;
-	int err;
+	int err = -ENOMEM;
 	int i;
 	__u32 addr;	/* Address to write */
 	__u8 *buf;
 
 	dev_dbg(&dev->dev, "load_firmware\n");
 	buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
-	if (!buf) {
-		err( "%s - error loading firmware: error = %d", __func__, -ENOMEM);
-		err = -ENOMEM;
+	if (!buf)
 		goto wraperr;
-	}
 
 	err = request_ihex_firmware(&loader_fw, "emi62/loader.fw", &dev->dev);
 	if (err)
@@ -112,16 +108,13 @@ static int emi62_load_firmware (struct usb_device *dev)
 	err = request_ihex_firmware(&firmware_fw, FIRMWARE_FW, &dev->dev);
 	if (err) {
 	nofw:
-		err( "%s - request_firmware() failed", __func__);
 		goto wraperr;
 	}
 
 	/* Assert reset (stop the CPU in the EMI) */
 	err = emi62_set_reset(dev,1);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 
 	rec = (const struct ihex_binrec *)loader_fw->data;
 
@@ -130,19 +123,15 @@ static int emi62_load_firmware (struct usb_device *dev)
 		err = emi62_writememory(dev, be32_to_cpu(rec->addr),
 					rec->data, be16_to_cpu(rec->len),
 					ANCHOR_LOAD_INTERNAL);
-		if (err < 0) {
-			err("%s - error loading firmware: error = %d", __func__, err);
+		if (err < 0)
 			goto wraperr;
-		}
 		rec = ihex_next_binrec(rec);
 	}
 
 	/* De-assert reset (let the CPU run) */
 	err = emi62_set_reset(dev,0);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
@@ -160,18 +149,14 @@ static int emi62_load_firmware (struct usb_device *dev)
 			rec = ihex_next_binrec(rec);
 		}
 		err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
-		if (err < 0) {
-			err("%s - error loading firmware: error = %d", __func__, err);
+		if (err < 0)
 			goto wraperr;
-		}
 	} while (rec);
 
 	/* Assert reset (stop the CPU in the EMI) */
 	err = emi62_set_reset(dev,1);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 
 	/* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
 	for (rec = (const struct ihex_binrec *)loader_fw->data;
@@ -179,18 +164,14 @@ static int emi62_load_firmware (struct usb_device *dev)
 		err = emi62_writememory(dev, be32_to_cpu(rec->addr),
 					rec->data, be16_to_cpu(rec->len),
 					ANCHOR_LOAD_INTERNAL);
-		if (err < 0) {
-			err("%s - error loading firmware: error = %d", __func__, err);
+		if (err < 0)
 			goto wraperr;
-		}
 	}
 
 	/* De-assert reset (let the CPU run) */
 	err = emi62_set_reset(dev,0);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 	msleep(250);	/* let device settle */
 
 	/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
@@ -201,19 +182,15 @@ static int emi62_load_firmware (struct usb_device *dev)
 			err = emi62_writememory(dev, be32_to_cpu(rec->addr),
 						rec->data, be16_to_cpu(rec->len),
 						ANCHOR_LOAD_EXTERNAL);
-			if (err < 0) {
-				err("%s - error loading firmware: error = %d", __func__, err);
+			if (err < 0)
 				goto wraperr;
-			}
 		}
 	}
 
 	/* Assert reset (stop the CPU in the EMI) */
 	err = emi62_set_reset(dev,1);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 
 	for (rec = (const struct ihex_binrec *)firmware_fw->data;
 	     rec; rec = ihex_next_binrec(rec)) {
@@ -221,19 +198,15 @@ static int emi62_load_firmware (struct usb_device *dev)
 			err = emi62_writememory(dev, be32_to_cpu(rec->addr),
 						rec->data, be16_to_cpu(rec->len),
 						ANCHOR_LOAD_EXTERNAL);
-			if (err < 0) {
-				err("%s - error loading firmware: error = %d", __func__, err);
+			if (err < 0)
 				goto wraperr;
-			}
 		}
 	}
 
 	/* De-assert reset (let the CPU run) */
 	err = emi62_set_reset(dev,0);
-	if (err < 0) {
-		err("%s - error loading firmware: error = %d", __func__, err);
+	if (err < 0)
 		goto wraperr;
-	}
 	msleep(250);	/* let device settle */
 
 	release_firmware(loader_fw);
@@ -247,6 +220,9 @@ static int emi62_load_firmware (struct usb_device *dev)
 	return 1;
 
 wraperr:
+	if (err < 0)
+		dev_err(&dev->dev,"%s - error loading firmware: error = %d\n",
+			__func__, err);
 	release_firmware(loader_fw);
 	release_firmware(bitstream_fw);
 	release_firmware(firmware_fw);