Commit ea4efe25 authored by Russell King's avatar Russell King Committed by David S. Miller

net: phy: marvell10g: add MDI swap reporting

Add reporting of the MDI swap to the Marvell 10G PHY driver by providing
a generic implementation for the standard 10GBASE-T pair swap register
and polarity register.  We also support reading the MDI swap status for
1G and below from a PCS register.
Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 05ca1b32
......@@ -29,6 +29,11 @@ enum {
MV_PCS_BASE_R = 0x1000,
MV_PCS_1000BASEX = 0x2000,
MV_PCS_PAIRSWAP = 0x8182,
MV_PCS_PAIRSWAP_MASK = 0x0003,
MV_PCS_PAIRSWAP_AB = 0x0002,
MV_PCS_PAIRSWAP_NONE = 0x0003,
/* These registers appear at 0x800X and 0xa00X - the 0xa00X control
* registers appear to set themselves to the 0x800X when AN is
* restarted, but status registers appear readable from either.
......@@ -180,6 +185,9 @@ static int mv3310_config_aneg(struct phy_device *phydev)
u32 advertising;
int ret;
/* We don't support manual MDI control */
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
if (phydev->autoneg == AUTONEG_DISABLE) {
ret = genphy_c45_pma_setup_forced(phydev);
if (ret < 0)
......@@ -269,6 +277,7 @@ static int mv3310_read_status(struct phy_device *phydev)
phydev->link = 0;
phydev->pause = 0;
phydev->asym_pause = 0;
phydev->mdix = 0;
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_BASE_R + MDIO_STAT1);
if (val < 0)
......@@ -323,6 +332,28 @@ static int mv3310_read_status(struct phy_device *phydev)
return val;
}
if (phydev->speed == SPEED_10000) {
val = genphy_c45_read_mdix(phydev);
if (val < 0)
return val;
} else {
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_PAIRSWAP);
if (val < 0)
return val;
switch (val & MV_PCS_PAIRSWAP_MASK) {
case MV_PCS_PAIRSWAP_AB:
phydev->mdix = ETH_TP_MDI_X;
break;
case MV_PCS_PAIRSWAP_NONE:
phydev->mdix = ETH_TP_MDI;
break;
default:
phydev->mdix = ETH_TP_MDI_INVALID;
break;
}
}
if ((phydev->interface == PHY_INTERFACE_MODE_SGMII ||
phydev->interface == PHY_INTERFACE_MODE_10GKR) && phydev->link) {
/* The PHY automatically switches its serdes interface (and
......
......@@ -233,6 +233,39 @@ int genphy_c45_read_pma(struct phy_device *phydev)
}
EXPORT_SYMBOL_GPL(genphy_c45_read_pma);
/**
* genphy_c45_read_mdix - read mdix status from PMA
* @phydev: target phy_device struct
*/
int genphy_c45_read_mdix(struct phy_device *phydev)
{
int val;
if (phydev->speed == SPEED_10000) {
val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD,
MDIO_PMA_10GBT_SWAPPOL);
if (val < 0)
return val;
switch (val) {
case MDIO_PMA_10GBT_SWAPPOL_ABNX | MDIO_PMA_10GBT_SWAPPOL_CDNX:
phydev->mdix = ETH_TP_MDI;
break;
case 0:
phydev->mdix = ETH_TP_MDI_X;
break;
default:
phydev->mdix = ETH_TP_MDI_INVALID;
break;
}
}
return 0;
}
EXPORT_SYMBOL_GPL(genphy_c45_read_mdix);
/* The gen10g_* functions are the old Clause 45 stub */
static int gen10g_config_aneg(struct phy_device *phydev)
......
......@@ -901,6 +901,7 @@ int genphy_c45_read_lpa(struct phy_device *phydev);
int genphy_c45_read_pma(struct phy_device *phydev);
int genphy_c45_pma_setup_forced(struct phy_device *phydev);
int genphy_c45_an_disable_aneg(struct phy_device *phydev);
int genphy_c45_read_mdix(struct phy_device *phydev);
static inline int phy_read_status(struct phy_device *phydev)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment