Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "An assorted pile of fixes along with some hardware enablement:

   - a fix for a KASAN / branch profiling related boot failure

   - some more fallout of the PUD rework

   - a fix for the Always Running Timer which is not initialized when
     the TSC frequency is known at boot time (via MSR/CPUID)

   - a resource leak fix for the RDT filesystem

   - another unwinder corner case fixup

   - removal of the warning for duplicate NMI handlers because there are
     legitimate cases where more than one handler can be registered at
     the last level

   - make a function static - found by sparse

   - a set of updates for the Intel MID platform which got delayed due
     to merge ordering constraints. It's hardware enablement for a non
     mainstream platform, so there is no risk"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mpx: Make unnecessarily global function static
  x86/intel_rdt: Put group node in rdtgroup_kn_unlock
  x86/unwind: Fix last frame check for aligned function stacks
  mm, x86: Fix native_pud_clear build error
  x86/kasan: Fix boot with KASAN=y and PROFILE_ANNOTATED_BRANCHES=y
  x86/platform/intel-mid: Add power button support for Merrifield
  x86/platform/intel-mid: Use common power off sequence
  x86/platform: Remove warning message for duplicate NMI handlers
  x86/tsc: Fix ART for TSC_KNOWN_FREQ
  x86/platform/intel-mid: Correct MSI IRQ line for watchdog device

arch/x86/kernel/cpu/intel_rdt_rdtgroup.c

@@ -727,7 +727,7 @@ void rdtgroup_kn_unlock(struct kernfs_node *kn)
 	if (atomic_dec_and_test(&rdtgrp->waitcount) &&
 	    (rdtgrp->flags & RDT_DELETED)) {
 		kernfs_unbreak_active_protection(kn);
-		kernfs_put(kn);
+		kernfs_put(rdtgrp->kn);
 		kfree(rdtgrp);
 	} else {
 		kernfs_unbreak_active_protection(kn);

arch/x86/kernel/head64.c

@@ -4,6 +4,7 @@
  *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
  */
 
+#define DISABLE_BRANCH_PROFILING
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <linux/types.h>

arch/x86/kernel/nmi.c

@@ -166,11 +166,9 @@ int __register_nmi_handler(unsigned int type, struct nmiaction *action)
 	spin_lock_irqsave(&desc->lock, flags);
 
 	/*
-	 * most handlers of type NMI_UNKNOWN never return because
-	 * they just assume the NMI is theirs.  Just a sanity check
-	 * to manage expectations
+	 * Indicate if there are multiple registrations on the
+	 * internal NMI handler call chains (SERR and IO_CHECK).
 	 */
-	WARN_ON_ONCE(type == NMI_UNKNOWN && !list_empty(&desc->head));
 	WARN_ON_ONCE(type == NMI_SERR && !list_empty(&desc->head));
 	WARN_ON_ONCE(type == NMI_IO_CHECK && !list_empty(&desc->head));
 

arch/x86/kernel/tsc.c

@@ -1333,6 +1333,8 @@ static int __init init_tsc_clocksource(void)
 	 * the refined calibration and directly register it as a clocksource.
 	 */
 	if (boot_cpu_has(X86_FEATURE_TSC_KNOWN_FREQ)) {
+		if (boot_cpu_has(X86_FEATURE_ART))
+			art_related_clocksource = &clocksource_tsc;
 		clocksource_register_khz(&clocksource_tsc, tsc_khz);
 		return 0;
 	}

arch/x86/kernel/unwind_frame.c

@@ -82,19 +82,43 @@ static size_t regs_size(struct pt_regs *regs)
 	return sizeof(*regs);
 }
 
+#ifdef CONFIG_X86_32
+#define GCC_REALIGN_WORDS 3
+#else
+#define GCC_REALIGN_WORDS 1
+#endif
+
 static bool is_last_task_frame(struct unwind_state *state)
 {
-	unsigned long bp = (unsigned long)state->bp;
-	unsigned long regs = (unsigned long)task_pt_regs(state->task);
+	unsigned long *last_bp = (unsigned long *)task_pt_regs(state->task) - 2;
+	unsigned long *aligned_bp = last_bp - GCC_REALIGN_WORDS;
 
 	/*
 	 * We have to check for the last task frame at two different locations
 	 * because gcc can occasionally decide to realign the stack pointer and
-	 * change the offset of the stack frame by a word in the prologue of a
-	 * function called by head/entry code.
+	 * change the offset of the stack frame in the prologue of a function
+	 * called by head/entry code.  Examples:
+	 *
+	 * <start_secondary>:
+	 *      push   %edi
+	 *      lea    0x8(%esp),%edi
+	 *      and    $0xfffffff8,%esp
+	 *      pushl  -0x4(%edi)
+	 *      push   %ebp
+	 *      mov    %esp,%ebp
+	 *
+	 * <x86_64_start_kernel>:
+	 *      lea    0x8(%rsp),%r10
+	 *      and    $0xfffffffffffffff0,%rsp
+	 *      pushq  -0x8(%r10)
+	 *      push   %rbp
+	 *      mov    %rsp,%rbp
+	 *
+	 * Note that after aligning the stack, it pushes a duplicate copy of
+	 * the return address before pushing the frame pointer.
 	 */
-	return bp == regs - FRAME_HEADER_SIZE ||
-	       bp == regs - FRAME_HEADER_SIZE - sizeof(long);
+	return (state->bp == last_bp ||
+		(state->bp == aligned_bp && *(aligned_bp+1) == *(last_bp+1)));
 }
 
 /*

arch/x86/mm/kasan_init_64.c

+#define DISABLE_BRANCH_PROFILING
 #define pr_fmt(fmt) "kasan: " fmt
 #include <linux/bootmem.h>
 #include <linux/kasan.h>

arch/x86/mm/mpx.c

@@ -590,7 +590,7 @@ static unsigned long mpx_bd_entry_to_bt_addr(struct mm_struct *mm,
  * we might run off the end of the bounds table if we are on
  * a 64-bit kernel and try to get 8 bytes.
  */
-int get_user_bd_entry(struct mm_struct *mm, unsigned long *bd_entry_ret,
+static int get_user_bd_entry(struct mm_struct *mm, unsigned long *bd_entry_ret,
 		long __user *bd_entry_ptr)
 {
 	u32 bd_entry_32;

arch/x86/platform/intel-mid/device_libs/Makefile

@@ -26,5 +26,6 @@ obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o
 obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
 # MISC Devices
 obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
+obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_mrfld_power_btn.o
 obj-$(subst m,y,$(CONFIG_RTC_DRV_CMOS)) += platform_mrfld_rtc.o
 obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_mrfld_wdt.o

arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c

+/*
+ * Intel Merrifield power button support
+ *
+ * (C) Copyright 2017 Intel Corporation
+ *
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/sfi.h>
+
+#include <asm/intel-mid.h>
+#include <asm/intel_scu_ipc.h>
+
+static struct resource mrfld_power_btn_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mrfld_power_btn_dev = {
+	.name		= "msic_power_btn",
+	.id		= PLATFORM_DEVID_NONE,
+	.num_resources	= ARRAY_SIZE(mrfld_power_btn_resources),
+	.resource	= mrfld_power_btn_resources,
+};
+
+static int mrfld_power_btn_scu_status_change(struct notifier_block *nb,
+					     unsigned long code, void *data)
+{
+	if (code == SCU_DOWN) {
+		platform_device_unregister(&mrfld_power_btn_dev);
+		return 0;
+	}
+
+	return platform_device_register(&mrfld_power_btn_dev);
+}
+
+static struct notifier_block mrfld_power_btn_scu_notifier = {
+	.notifier_call	= mrfld_power_btn_scu_status_change,
+};
+
+static int __init register_mrfld_power_btn(void)
+{
+	if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
+		return -ENODEV;
+
+	/*
+	 * We need to be sure that the SCU IPC is ready before
+	 * PMIC power button device can be registered:
+	 */
+	intel_scu_notifier_add(&mrfld_power_btn_scu_notifier);
+
+	return 0;
+}
+arch_initcall(register_mrfld_power_btn);
+
+static void __init *mrfld_power_btn_platform_data(void *info)
+{
+	struct resource *res = mrfld_power_btn_resources;
+	struct sfi_device_table_entry *pentry = info;
+
+	res->start = res->end = pentry->irq;
+	return NULL;
+}
+
+static const struct devs_id mrfld_power_btn_dev_id __initconst = {
+	.name			= "bcove_power_btn",
+	.type			= SFI_DEV_TYPE_IPC,
+	.delay			= 1,
+	.msic			= 1,
+	.get_platform_data	= &mrfld_power_btn_platform_data,
+};
+
+sfi_device(mrfld_power_btn_dev_id);

arch/x86/platform/intel-mid/device_libs/platform_mrfld_wdt.c

@@ -19,7 +19,7 @@
 #include <asm/intel_scu_ipc.h>
 #include <asm/io_apic.h>
 
-#define TANGIER_EXT_TIMER0_MSI 15
+#define TANGIER_EXT_TIMER0_MSI 12
 
 static struct platform_device wdt_dev = {
 	.name = "intel_mid_wdt",

arch/x86/platform/intel-mid/mfld.c

@@ -17,16 +17,6 @@
 
 #include "intel_mid_weak_decls.h"
 
-static void penwell_arch_setup(void);
-/* penwell arch ops */
-static struct intel_mid_ops penwell_ops = {
-	.arch_setup = penwell_arch_setup,
-};
-
-static void mfld_power_off(void)
-{
-}
-
 static unsigned long __init mfld_calibrate_tsc(void)
 {
 	unsigned long fast_calibrate;
@@ -63,9 +53,12 @@ static unsigned long __init mfld_calibrate_tsc(void)
 static void __init penwell_arch_setup(void)
 {
 	x86_platform.calibrate_tsc = mfld_calibrate_tsc;
-	pm_power_off = mfld_power_off;
 }
 
+static struct intel_mid_ops penwell_ops = {
+	.arch_setup = penwell_arch_setup,
+};
+
 void *get_penwell_ops(void)
 {
 	return &penwell_ops;