Commit eb01b975 authored by Alexander Duyck's avatar Alexander Duyck Committed by Jeff Kirsher

ixgbe: Move poll routine in order to improve readability

This change relocates the ixgbe_poll routine so it is right next to the
interrupt routine that schedules and calls it.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: default avatarStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 6bb78cfb
...@@ -2307,6 +2307,55 @@ static irqreturn_t ixgbe_msix_clean_rings(int irq, void *data) ...@@ -2307,6 +2307,55 @@ static irqreturn_t ixgbe_msix_clean_rings(int irq, void *data)
return IRQ_HANDLED; return IRQ_HANDLED;
} }
/**
* ixgbe_poll - NAPI Rx polling callback
* @napi: structure for representing this polling device
* @budget: how many packets driver is allowed to clean
*
* This function is used for legacy and MSI, NAPI mode
**/
static int ixgbe_poll(struct napi_struct *napi, int budget)
{
struct ixgbe_q_vector *q_vector =
container_of(napi, struct ixgbe_q_vector, napi);
struct ixgbe_adapter *adapter = q_vector->adapter;
struct ixgbe_ring *ring;
int per_ring_budget;
bool clean_complete = true;
#ifdef CONFIG_IXGBE_DCA
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
ixgbe_update_dca(q_vector);
#endif
ixgbe_for_each_ring(ring, q_vector->tx)
clean_complete &= !!ixgbe_clean_tx_irq(q_vector, ring);
/* attempt to distribute budget to each queue fairly, but don't allow
* the budget to go below 1 because we'll exit polling */
if (q_vector->rx.count > 1)
per_ring_budget = max(budget/q_vector->rx.count, 1);
else
per_ring_budget = budget;
ixgbe_for_each_ring(ring, q_vector->rx)
clean_complete &= ixgbe_clean_rx_irq(q_vector, ring,
per_ring_budget);
/* If all work not completed, return budget and keep polling */
if (!clean_complete)
return budget;
/* all work done, exit the polling mode */
napi_complete(napi);
if (adapter->rx_itr_setting & 1)
ixgbe_set_itr(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx));
return 0;
}
/** /**
* ixgbe_request_msix_irqs - Initialize MSI-X interrupts * ixgbe_request_msix_irqs - Initialize MSI-X interrupts
* @adapter: board private structure * @adapter: board private structure
...@@ -4253,55 +4302,6 @@ void ixgbe_down(struct ixgbe_adapter *adapter) ...@@ -4253,55 +4302,6 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
#endif #endif
} }
/**
* ixgbe_poll - NAPI Rx polling callback
* @napi: structure for representing this polling device
* @budget: how many packets driver is allowed to clean
*
* This function is used for legacy and MSI, NAPI mode
**/
static int ixgbe_poll(struct napi_struct *napi, int budget)
{
struct ixgbe_q_vector *q_vector =
container_of(napi, struct ixgbe_q_vector, napi);
struct ixgbe_adapter *adapter = q_vector->adapter;
struct ixgbe_ring *ring;
int per_ring_budget;
bool clean_complete = true;
#ifdef CONFIG_IXGBE_DCA
if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
ixgbe_update_dca(q_vector);
#endif
ixgbe_for_each_ring(ring, q_vector->tx)
clean_complete &= !!ixgbe_clean_tx_irq(q_vector, ring);
/* attempt to distribute budget to each queue fairly, but don't allow
* the budget to go below 1 because we'll exit polling */
if (q_vector->rx.count > 1)
per_ring_budget = max(budget/q_vector->rx.count, 1);
else
per_ring_budget = budget;
ixgbe_for_each_ring(ring, q_vector->rx)
clean_complete &= ixgbe_clean_rx_irq(q_vector, ring,
per_ring_budget);
/* If all work not completed, return budget and keep polling */
if (!clean_complete)
return budget;
/* all work done, exit the polling mode */
napi_complete(napi);
if (adapter->rx_itr_setting & 1)
ixgbe_set_itr(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx));
return 0;
}
/** /**
* ixgbe_tx_timeout - Respond to a Tx Hang * ixgbe_tx_timeout - Respond to a Tx Hang
* @netdev: network interface device structure * @netdev: network interface device structure
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment