Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull another powerpc irq fix from Benjamin Herrenschmidt:
 "It looks like my previous fix for the lazy irq masking problem wasn't
  quite enough.  There was another problem related to performance
  monitor interrupts acting as NMIs leaving the flags in an incorrect
  state.  Here's a fix that finally seems to make perf solid again."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/irq: Fix another case of lazy IRQ state getting out of sync

arch/powerpc/kernel/entry_64.S

@@ -588,23 +588,19 @@ _GLOBAL(ret_from_except_lite)
 fast_exc_return_irq:
 restore:
 	/*
-	 * This is the main kernel exit path, we first check if we
-	 * have to change our interrupt state.
+	 * This is the main kernel exit path. First we check if we
+	 * are about to re-enable interrupts
 	 */
 	ld	r5,SOFTE(r1)
 	lbz	r6,PACASOFTIRQEN(r13)
-	cmpwi	cr1,r5,0
-	cmpw	cr0,r5,r6
-	beq	cr0,4f
+	cmpwi	cr0,r5,0
+	beq	restore_irq_off
 
-	/* We do, handle disable first, which is easy */
-	bne	cr1,3f;
- 	li	r0,0
-	stb	r0,PACASOFTIRQEN(r13);
-	TRACE_DISABLE_INTS
-	b	4f
+	/* We are enabling, were we already enabled ? Yes, just return */
+	cmpwi	cr0,r6,1
+	beq	cr0,do_restore
 
-3:	/*
+	/*
 	 * We are about to soft-enable interrupts (we are hard disabled
 	 * at this point). We check if there's anything that needs to
 	 * be replayed first.
@@ -626,7 +622,7 @@ restore_no_replay:
 	/*
 	 * Final return path. BookE is handled in a different file
 	 */
-4:
+do_restore:
 #ifdef CONFIG_PPC_BOOK3E
 	b	.exception_return_book3e
 #else
@@ -699,6 +695,25 @@ fast_exception_return:
 
 #endif /* CONFIG_PPC_BOOK3E */
 
+	/*
+	 * We are returning to a context with interrupts soft disabled.
+	 *
+	 * However, we may also about to hard enable, so we need to
+	 * make sure that in this case, we also clear PACA_IRQ_HARD_DIS
+	 * or that bit can get out of sync and bad things will happen
+	 */
+restore_irq_off:
+	ld	r3,_MSR(r1)
+	lbz	r7,PACAIRQHAPPENED(r13)
+	andi.	r0,r3,MSR_EE
+	beq	1f
+	rlwinm	r7,r7,0,~PACA_IRQ_HARD_DIS
+	stb	r7,PACAIRQHAPPENED(r13)
+1:	li	r0,0
+	stb	r0,PACASOFTIRQEN(r13);
+	TRACE_DISABLE_INTS
+	b	do_restore
+
 	/*
 	 * Something did happen, check if a re-emit is needed
 	 * (this also clears paca->irq_happened)
@@ -748,6 +763,9 @@ restore_check_irq_replay:
 #endif /* CONFIG_PPC_BOOK3E */
 1:	b	.ret_from_except /* What else to do here ? */
  
+
+
+3:
 do_work:
 #ifdef CONFIG_PREEMPT
 	andi.	r0,r3,MSR_PR	/* Returning to user mode? */

arch/powerpc/kernel/irq.c

@@ -229,6 +229,19 @@ notrace void arch_local_irq_restore(unsigned long en)
 	 */
 	if (unlikely(irq_happened != PACA_IRQ_HARD_DIS))
 		__hard_irq_disable();
+#ifdef CONFIG_TRACE_IRQFLAG
+	else {
+		/*
+		 * We should already be hard disabled here. We had bugs
+		 * where that wasn't the case so let's dbl check it and
+		 * warn if we are wrong. Only do that when IRQ tracing
+		 * is enabled as mfmsr() can be costly.
+		 */
+		if (WARN_ON(mfmsr() & MSR_EE))
+			__hard_irq_disable();
+	}
+#endif /* CONFIG_TRACE_IRQFLAG */
+
 	set_soft_enabled(0);
 
 	/*